Academic literature on the topic 'Isotropic rod'

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Isotropic rod.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Isotropic rod"

1

Koenderink, G. H., A. P. Philipse, and S. G. J. M. Kluijtmans. "Sphere dynamics in isotropic colloidal rod fluids." Journal of Physics: Condensed Matter 12, no. 8A (2000): A339—A343. http://dx.doi.org/10.1088/0953-8984/12/8a/345.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Shundyak, Kostya, and René van Roij. "Isotropic-nematic interfaces of hard-rod fluids." Journal of Physics: Condensed Matter 13, no. 21 (2001): 4789–800. http://dx.doi.org/10.1088/0953-8984/13/21/310.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Jungblut, S., R. Tuinier, K. Binder, and T. Schilling. "Depletion induced isotropic-isotropic phase separation in suspensions of rod-like colloids." Journal of Chemical Physics 127, no. 24 (2007): 244909. http://dx.doi.org/10.1063/1.2815805.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Pujara, Nimish, Greg A. Voth, and Evan A. Variano. "Scale-dependent alignment, tumbling and stretching of slender rods in isotropic turbulence." Journal of Fluid Mechanics 860 (December 7, 2018): 465–86. http://dx.doi.org/10.1017/jfm.2018.866.

Full text
Abstract:
We examine the dynamics of slender, rigid rods in direct numerical simulation of isotropic turbulence. The focus is on the statistics of three quantities and how they vary as rod length increases from the dissipation range to the inertial range. These quantities are (i) the steady-state rod alignment with respect to the perceived velocity gradients in the surrounding flow, (ii) the rate of rod reorientation (tumbling) and (iii) the rate at which the rod end points move apart (stretching). Under the approximations of slender-body theory, the rod inertia is neglected and rods are modelled as pas
APA, Harvard, Vancouver, ISO, and other styles
5

Podgornik, Rudolf. "Theory of Inhomogeneous Rod-like Coulomb Fluids." Symmetry 13, no. 2 (2021): 274. http://dx.doi.org/10.3390/sym13020274.

Full text
Abstract:
A field theoretic representation of the classical partition function is derived for a system composed of a mixture of anisotropic and isotropic mobile charges that interact via long range Coulomb and short range nematic interactions. The field theory is then solved on a saddle-point approximation level, leading to a coupled system of Poisson–Boltzmann and Maier–Saupe equations. Explicit solutions are finally obtained for a rod-like counterion-only system in proximity to a charged planar wall. The nematic order parameter profile, the counterion density profile and the electrostatic potential pr
APA, Harvard, Vancouver, ISO, and other styles
6

Mironov, B. G., та Yu B. Mironov. "ОБ ОПРЕДЕЛЕНИИ КОМПОНЕНТ ДЕФОРМАЦИИ В СЛУЧАЕ КРУЧЕНИЯ ИЗОТРОПНЫХ СТЕРЖНЕЙ, НАХОДЯЩИХСЯ ПОД ДЕЙСТВИЕМ ВНЕШНЕГО ДАВЛЕНИЯ". Вестник Чувашского государственного педагогического университета им. И.Я. Яковлева. Серия: Механика предельного состояния, № 1(55) (6 червня 2023): 13–17. http://dx.doi.org/10.37972/chgpu.2023.55.1.002.

Full text
Abstract:
In this paper, we study the deformed state of an isotropic rod made of an ideal rigidplastic material, assuming that the rod is twisted around its axis. The torsion of isotropic and anisotropic ideally plastic rods was considered in [1–5]. In [6–9], the torsion of rods under the action of linear pressure. В настоящей работе исследуется деформированное состояние изотропного стержня из идеального жесткопластического материала, в предположении, что стержень закручивается вокруг своей оси. Кручение изотропных и анизотропных идеально пластических стержней рассмотрено в работах [1–5]. В работах [6–9
APA, Harvard, Vancouver, ISO, and other styles
7

Dressel, Christian, Wolfgang Weissflog, and Carsten Tschierske. "Spontaneous mirror symmetry breaking in a re-entrant isotropic liquid." Chemical Communications 51, no. 87 (2015): 15850–53. http://dx.doi.org/10.1039/c5cc06843f.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Izzo, Dora. "Viscosity of a solution of polyelectrolytes near the rod limit." Soft Matter 18, no. 8 (2022): 1696–705. http://dx.doi.org/10.1039/d1sm01631h.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Wensink, H. H., G. J. Vroege, and H. N. W. Lekkerkerker. "Isotropic-nematic phase separation in asymmetrical rod-plate mixtures." Journal of Chemical Physics 115, no. 15 (2001): 7319–29. http://dx.doi.org/10.1063/1.1403686.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Kardomateas, G. A. "Three-Dimensional Elasticity Solution for the Buckling of Transversely Isotropic Rods: The Euler Load Revisited." Journal of Applied Mechanics 62, no. 2 (1995): 346–55. http://dx.doi.org/10.1115/1.2895937.

Full text
Abstract:
The bifurcation of equilibrium of a compressed transversely isotropic bar is investigated by using a three-dimensional elasticity formulation. In this manner, an assessment of the thickness effects can be accurately performed. For isotropic rods of circular cross-section, the bifurcation value of the compressive force turns out to coincide with the Euler critical load for values of the length-over-radius ratio approximately greater than 15. The elasticity approach predicts always a lower (than the Euler value) critical load for isotropic bodies; the two examples of transversely isotropic bodie
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Isotropic rod"

1

Fedotov, IA, AD Polyanin, and MY Shatalov. "Theory of Free and Forced Vibrations of a Rigid Rod Based on the Rayleigh Model." Pleaides Publishing LTD, 2007. http://encore.tut.ac.za/iii/cpro/DigitalItemViewPage.external?sp=1001012.

Full text
Abstract:
We consider one-dimensional longitudinal vibrations of a rigid rod with a nonuniform cross-section, fixed at its ends with lumped masses and springs. The cross-section inertia effects are taken into account on the basis of the Rayleigh theory. The equation of motion and the boundary conditions are derived from Hamilton’s variational principle. The characteristic equation is constructed and the eigenvalues for the harmonic vibrations of the rod are calculated. It is shown that the eigenvalues are bounded from above. Two types of the orthogonality of the eigenfunctions corresponding to the eigen
APA, Harvard, Vancouver, ISO, and other styles
2

Клименко, Володимир Андрійович, Владимир Андреевич Клименко, Volodymyr Andriiovych Klymenko та Д. Р. Москаленко. "Нестационарное температурное состояние изотропного стержня под действием гармонических тепловых нагрузок". Thesis, Издательство СумГУ, 2011. http://essuir.sumdu.edu.ua/handle/123456789/8111.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Wang, Jia-Huei, and 汪佳慧. "Aspect Ratio Modulations of Fully Conjugated Rod-like Polymer Electrolyte for Enhanced Three-dimensionally Isotropic Ionic Conductivity." Thesis, 2009. http://ndltd.ncl.edu.tw/handle/10080144274250998986.

Full text
Abstract:
碩士<br>國立中山大學<br>材料與光電科學學系研究所<br>98<br>This study utilized polycondensation reaction to synthesize fully conjugated rod-like polymer dihydroxy-PBI. Chemical derivatizations were applied to attach pendants of propane sulfonic coil for dihydroxy-PBI-PS and to attach aromatic phenylene ring with Li ionic moiety for dihydroxy-PBI-AS. The attachment of pendants for dihydroxy-PBI-PS was 42.27 % and for dihydroxy-PBI-AS was only for 0.04 % causing by stereo hindrance of this molecule. These polymers seemed to have good thermal stability. Dihydroxy-PBI started to show degradation at 467.8 oC and re
APA, Harvard, Vancouver, ISO, and other styles
4

Tenkam, Herve Michel Djouosseu. "Hyperbolic problems of higher order with application to isotropic and piezoelectric rods." 2012. http://encore.tut.ac.za/iii/cpro/DigitalItemViewPage.external?sp=1001214.

Full text
Abstract:
D. Tech. Mathematical Technology.<br>Investigates hyperbolic and pseudohyperbolic equations and the results are applied to higher-order rod approximations for the propagation of the longitudinal stress waves in elastic rods. The main objectives of this thesis are: 1. Provide a unified approach to the derivation of the families of one-dimensional hyperbolic differential equations simultaneously with the associated natural and essential boundary conditions describing longitudinal vibration of finite length rods. 2. Establish a new theoremto shorten the derivation of equations of motion and the c
APA, Harvard, Vancouver, ISO, and other styles
5

Mosberg, Noah Avram. "Experimental investigation of the performance of a fully cooled gas turbine vane with and without mainstream flow and experimental analysis supporting the redesign of a wind tunnel test section." Thesis, 2013. http://hdl.handle.net/2152/28499.

Full text
Abstract:
This study focused on experimentally determining the cooling performance of a fully cooled, scaled-up model of a C3X turbine vane. The primary objective was to determine the differences in overall effectiveness in the presence and absence of a hot mainstream flowing over the vane. Overall effectiveness was measured using a thermally scaled matched Biot number vane with an impingement plate providing the internal cooling. This is the first study focused on investigating the effect of removing the mainstream flow and comparing the contour and laterally-averaged effectiveness data in support
APA, Harvard, Vancouver, ISO, and other styles

Book chapters on the topic "Isotropic rod"

1

Lekkerkerker, Henk N. W., Remco Tuinier, and Mark Vis. "Phase Behaviour of Colloidal Rods Mixed with Depletants." In Colloids and the Depletion Interaction. Springer International Publishing, 2024. http://dx.doi.org/10.1007/978-3-031-52131-7_8.

Full text
Abstract:
AbstractSo far, we have considered the phase behaviour of colloidal spheres mixed with depletants. In Chap. 3, we considered the simplest type of depletant, the penetrable hard sphere (PHS). We then extended this treatment to ideal and excluded volume polymers in Chap. 4; and in Chap. 6, we considered small colloidal spheres (including micelles). Colloidal rods as depletants were addressed in Chap. 7; however, Chap. 7 only considered dilute dispersions of rods, in which the rods assume all configurations and are hence isotropic. In this chapter, we consider the phase behaviour of mixtures of c
APA, Harvard, Vancouver, ISO, and other styles
2

Hayashida, Shigeru. "Technora® Fiber: Super Fiber from the Isotropic Solution of Rigid-Rod Polymer." In High-Performance and Specialty Fibers. Springer Japan, 2016. http://dx.doi.org/10.1007/978-4-431-55203-1_9.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Rzoska, Sylwester J., and Aleksandra Drozd-Rzoska. "On the Tricritical Point of the Isotropic — Nematic Transition in a Rod-Like Mesogen Hidden in the Negative Pressure Region." In Liquids Under Negative Pressure. Springer Netherlands, 2002. http://dx.doi.org/10.1007/978-94-010-0498-5_11.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Drozd-Rzoska, Aleksandra, and Sylwester J. Rzoska. "Anomalous Decoupling of the dc Conductivity and the Structural Relaxation Time in the Isotropic Phase of a Rod-Like Liquid Crystalline Compound." In Metastable Systems under Pressure. Springer Netherlands, 2010. http://dx.doi.org/10.1007/978-90-481-3408-3_10.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Heath, A. N. "Evaluation of the Isotropic Road Roughness Assumption." In The Dynamics of Vehicles on roads and on tracks. CRC Press, 2021. http://dx.doi.org/10.1201/9781003210894-21.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Vollmann, J., M. R. Pfaffinger, and J. Dual. "Complete Elastic Characterization of Transversely Isotropic Composite Rods by Guided Structural Waves." In Material Identification Using Mixed Numerical Experimental Methods. Springer Netherlands, 1997. http://dx.doi.org/10.1007/978-94-009-1471-1_26.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Odijk, Theo. "The theory of light scattering from rod-like polyelectrolytes." In Light Seattering. Oxford University PressOxford, 2015. http://dx.doi.org/10.1093/oso/9780198517832.003.0003.

Full text
Abstract:
Abstract A significant class of polyelectrolytes consists of slender, rod-like particles. Important examples include biopolymers such as short double-stranded DNA, helical xanthan, schizophyllan, F-actin, tobacco mosaic virus and fd virus. They may be semi-flexible but if the ratio of the persistence length to the contour length is smaller than unity, it becomes useful to model the polyions by charged rods. Inorganic colloids such as vanadium pentoxide and boehmite form another interesting subclass which may be considered completely rigid rods for most practical purposes. My objective here is
APA, Harvard, Vancouver, ISO, and other styles
8

EOM, S. M., and I. J. CHUNG. "RHEOLOGICAL PROPERTIES OF ROD-LIKE POLYMER SOLUTION IN ISOTROPIC AND NEMATIC PHASES." In Theoretical and Applied Rheology. Elsevier, 1992. http://dx.doi.org/10.1016/b978-0-444-89007-8.50200-8.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Venkatasubramanian, N., Thuy D. Dang, Soo-Young Park, Vladyslav Kholodovych, and William J. Welsh. "Poly(benzobisoxazole), Naphthalene Derivatives." In Polymer Data Handbook. Oxford University PressNew York, NY, 2009. http://dx.doi.org/10.1093/oso/9780195181012.003.0063.

Full text
Abstract:
Abstract Major Applications of Interest High performance fibers, films, and coatings. Synthesis Polycondensation of 2,6-naphthalenedicarboxylic acid or 1,5-naphthalenedicarboxylic acid with 4,6-diaminoresorcinol dihydrochloride in 83% polyphosphoric acid (PPA)(1−4) using the ‘P2O5 adjustment method’.(5) Although Naph-2,6-PBO composition is mentioned in the Japanese patent (reference 3), the properties of this rigid-rod polymer have not been described in the literature. Processing Isotropic films are mainly cast from dilute methanesulfonic acid solutions. Fabrication of the polymeric fibers is
APA, Harvard, Vancouver, ISO, and other styles
10

Gold, Douglas G., Wilmer G. Miller, Taner Z. Sen, and Andrzej Kloczkowski. "Poly(γ -benzyl-L-glutamate)." In Polymer Data Handbook. Oxford University PressNew York, NY, 2009. http://dx.doi.org/10.1093/oso/9780195181012.003.0066.

Full text
Abstract:
Abstract Major Applications Modeling of conformational changes of biopolymers and modeling of α-helical polypeptides. Used in chromatography as a stationary phase for the resolution of racemic materials. Microencapsulation of pharmaceutically active hydrophobic liquids. Improves shatter resistance of plastics when blended with poly(vinyl chloride), poly(vinyl acetate), or their copolymers. Photo-induced energy transfer switches containing chromophores at both ends of oligopeptide chains. Properties of Special Interest Exists in a highly ordered, well-defined, α-helical conformation held intact
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Isotropic rod"

1

Nikitin, Pavel A., and Vitold E. Pozhar. "On the Elasto-Optic Constants of Linear Isotropic Dielectrics." In 2024 Intelligent Technologies and Electronic Devices in Vehicle and Road Transport Complex (TIRVED). IEEE, 2024. https://doi.org/10.1109/tirved63561.2024.10769795.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Soukup, Josef, Jan Skočilas, Blanka Skočilasová, Lenka Rychlíková, and Tereza Jarošová. "Impact of elastic rod on thin elastic isotropic and orthotropic plate." In PROCEEDINGS OF THE 2ND INTERNATIONAL CONFERENCE ON BIOSCIENCE, BIOTECHNOLOGY, AND BIOMETRICS 2019. AIP Publishing, 2019. http://dx.doi.org/10.1063/1.5140874.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Uchiyama, Midori, Arisa Yanagihara, Hajime Koikegami, Hiroaki Hatanaka, and Tadashi Maruyama. "Application of Ultrasonic Technique for Precipitate Detection and Viscosity Measurement of Molten Glass at Elevated Temperature." In 2014 22nd International Conference on Nuclear Engineering. American Society of Mechanical Engineers, 2014. http://dx.doi.org/10.1115/icone22-30360.

Full text
Abstract:
This paper describes the results of ultrasonic examination of molten glass in the glass melter for the vitrification process of high-level radioactive liquid waste (HLW). The propagation and the attenuation of ultrasound in the molten glass were measured to study feasibility of detecting noble metal precipitates and the viscosity measurement of glass melter. The ultrasonic propagation experiment at 2.25MHz were carried out in a simulant fluid (glycerin) at room temperature and the molten glass at 1000°C using ultrasonic wave guide rods. The wave guide rod materials used in this research are a
APA, Harvard, Vancouver, ISO, and other styles
4

Maeda, Tadakazu, and Masao Doi. "Dynamical structure factor of a solution of charged rod-like polymers in the isotropic phase." In Moscow - DL tentative, edited by Sergei A. Akhmanov and Marina Y. Poroshina. SPIE, 1991. http://dx.doi.org/10.1117/12.57315.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Koikegami, Hajime, Shigeyoshi Yasunaga, Toshiaki Kakihara, et al. "Ultrasonic Examination of Noble Metal Precipitate Detection in Glass Melter." In 2013 21st International Conference on Nuclear Engineering. American Society of Mechanical Engineers, 2013. http://dx.doi.org/10.1115/icone21-16816.

Full text
Abstract:
This paper describes the results of ultrasonic examination of the build-up of noble metal precipitates in the glass melter using a wave guide rod. The glass melter is used for the vitrification process of high-level radioactive liquid waste (HLLW). A high density isotropic graphite T-6 (Ibiden Co., Ltd.) and a nickel-based corrosion and heat resistant alloy 690 were selected as candidate materials of wave guide rod. Ultrasonic propagation experiment with the frequency 0.5, 1.0 and 2.25 MHz was performed using the wave guide rods. The T-6 graphite wave guide rod in the simulant fluid (glycerin)
APA, Harvard, Vancouver, ISO, and other styles
6

Xie, Xiaoyang, Houjian Zhao, Xiaowei Li, and Xinxin Wu. "Microscopic Turbulence Topology Analysis of the Cross Flow Over a Square Arranged Tube Bundle Using Direct Numerical Simulation." In 2024 31st International Conference on Nuclear Engineering. American Society of Mechanical Engineers, 2024. http://dx.doi.org/10.1115/icone31-136171.

Full text
Abstract:
Abstract Helical tube bundles with small tube pitches are usually preferable for intermediate heat exchangers (IHXs) of High Temperature Gas-cooled Reactors (HTGRs) for its compactness. Too small tube pitches would introduce more complicated flow features in cross flow over tube bundles. In the current investigation, microscopic analysis on turbulence topology of cross flow over a square arranged tube bundle are investigated using Direct Numerical Simulation (DNS). The time averaged flow field as well as the Reynolds stress distributions are first discussed. Then, a method that utilizes a red-
APA, Harvard, Vancouver, ISO, and other styles
7

Sharma, J., P. Fiborek, R. Soman, et al. "Damage detection in isotropic cracked rod via fusion of genetic algorithm with deep learning-based wave propagation simulators." In 15th World Congress on Computational Mechanics (WCCM-XV) and 8th Asian Pacific Congress on Computational Mechanics (APCOM-VIII). CIMNE, 2022. http://dx.doi.org/10.23967/wccm-apcom.2022.034.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Zeng, Heyi, and Yun Guo. "Comparative Studies of Turbulence Models Application in Thermal Hydraulic Analysis of Nuclear Reactor Core." In ASME 2010 3rd Joint US-European Fluids Engineering Summer Meeting collocated with 8th International Conference on Nanochannels, Microchannels, and Minichannels. ASMEDC, 2010. http://dx.doi.org/10.1115/fedsm-icnmm2010-30109.

Full text
Abstract:
Rod bundles are essential elements of pressurized water nuclear reactors. They consist of tightly packed arrays of rods, which contain the nuclear fuel and are surrounded by flowing liquid coolant. Flow phenomena in the subchannels bounded by adjacent rods are quite complex and exhibit patterns not present in pipe flows. Development of nuclear reactors and of fuel assemblies requires fluid dynamics analysis activities. The detailed prediction of velocity and temperature distributions inside a rod bundle is one of the main objectives of the current research in reactor thermal hydraulics. Comput
APA, Harvard, Vancouver, ISO, and other styles
9

Goudas, I., I. Stavrakis, and S. Natsiavas. "Nonlinear Dynamics of Single-Cylinder Flexible Reciprocating Engines." In ASME 2003 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. ASMEDC, 2003. http://dx.doi.org/10.1115/detc2003/vib-48585.

Full text
Abstract:
In the present study, dynamic response of single-cylinder reciprocating engines is investigated. The models examined take into account the flexibility of the engine mechanism associated with either its connecting rod or its supporting bearings. In addition, both the driving and the resisting moments are expressed as functions of the crankshaft motion. This leads to dynamic models with equations of motion appearing in a strongly nonlinear form. These equations are then solved numerically, by employing methodologies of both the time and the frequency domain. In particular, these methodologies in
APA, Harvard, Vancouver, ISO, and other styles
10

Peters, Daniel T., Rahul Kapadia, Maarten Hoeijmakers, Harald Koestenbauer, and Florian Niggl. "Case Study on the Acceptance of a Unique Refractory Material in ASME Section VIII." In ASME 2023 Pressure Vessels & Piping Conference. American Society of Mechanical Engineers, 2023. http://dx.doi.org/10.1115/pvp2023-106904.

Full text
Abstract:
Abstract The use of hot isostatically pressed isotropic pure molybdenum was recently processed through ASME Section VIII. This is a unique material for the manufacture of pressure vessels as pure molybdenum is typically used for applications such as refractory, resistance wire for heating elements and structural thermal barrier components for internal furnaces for hot isostatic presses. There are several specifications for coverage of molybdenum such as ASTM B387, Standard Specification for Molybdenum and Molybdenum Alloy Bar, Rod, and Wire [1], and ASTM B386/B386M, Standard Specification for
APA, Harvard, Vancouver, ISO, and other styles
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!