Relevant bibliographies by topics / Jaw plate

Academic literature on the topic 'Jaw plate'

Author: Grafiati
Published: 4 June 2021
Last updated: 14 February 2022

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Jaw plate.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Books
  4. Book chapters
  5. Conference papers

Journal articles on the topic "Jaw plate":

1

Luo, Zhong Hua, and She Huan Li. "Optimization Design for Crushing Mechanism of Double Toggle Jaw Crusher." Applied Mechanics and Materials 201-202 (October 2012): 312–16. http://dx.doi.org/10.4028/www.scientific.net/amm.201-202.312.

Full text
APA, Harvard, Vancouver, ISO, and other styles
Abstract:
This paper conducts a comprehensive study on the optimization design for crushing mechanism of double toggle jaw crusher. The optimization aim is to reduce characteristic value of moving jaw plate, to raise capacity of jaw crusher, and to ensure entrance and outlet dimensions of jaw crusher. Firstly, formulae are derived for displacement of the topmost point and the bottommost point of moving jaw plate, and for the meshing angle between moving jaw plate and fixed jaw plate. Secondly, an optimization design model is established for the crushing mechanism. Finally, with C++ programming and half-penalty function method, an optimization design program is compiled for crushing mechanism of double toggle jaw crusher. Optimization is carried out for the crushing mechanism of PEJ900×1200 double toggle jaw crusher, and the optimization result is satisfactory. In the optimized crushing mechanism, the entrance and outlet dimensions and the maximum meshing angle and horizontal strokes of the topmost point and the bottommost point of moving jaw plate completely meet the design requirements. So, this paper makes it possible to raise the quality of double toggle jaw crusher.
2

Deepak, B. B. V. L., and M. V. A. Raju Bahubalendruni. "Numerical analysis for force distribution along the swing jaw plate of a single toggle jaw crusher." World Journal of Engineering 14, no. 3 (June 12, 2017): 255–60. http://dx.doi.org/10.1108/wje-07-2016-0025.

Full text
APA, Harvard, Vancouver, ISO, and other styles
Abstract:
Purpose The purpose of this research work is helpful for recognizing the crushing characteristics of a single toggle jaw crusher during its operation. It is useful for designing a new prototype of this kind of machine with optimal dimensions of the jaw crusher frame and the crushing chamber. Design/methodology/approach The efficiency of the jaw crusher primarily depends on the kinematic characteristics of the swing jaw plate during the crushing process. The present research work deals with the kinematic analysis of the swing jaw plate of a single toggle jaw crusher. Findings During the analysis, the system is considered as a four-bar crank rocker mechanism. The force distribution is analyzed based on the results obtained from the motion analysis of the swing jaw plate. Originality/value The movement of the swing jaw plate is explained in detail while the machine is in operation. Kinematic analysis of the liner has been performed by considering some points along the swing jaw plate. The results obtained from the movement analysis of the swing jaw plate force distribution along the liner are analyzed. From this analysis, the chamber geometry can be optimized according to the requirement for the crushing motion of different zones in the crushing chamber.
3

Polushyna, M. V., T. V. Moskalova, and V. F. Hankevich. "Static force analysis of a single toggle jaw crusher." Geo-Technical mechanics, no. 152 (2020): 254–62. http://dx.doi.org/10.15407/geotm2020.152.254.

Full text
APA, Harvard, Vancouver, ISO, and other styles
Abstract:
There are various recommendations in domestic and foreign literature regarding the law of distribution of the crushing load along the swing plate of jaw crushers: even, linear or nonlinear. The method of load distribution along the swing jaw affects the resultant crushing force, its application point and, therefore, the forces subjected to the jaw crusher links. A feature of a single toggle jaw crusher is the strong force exerted on the eccentric shaft since the crushing forces are directly transferred to the shaft. Therefore, it is important to determine the worst design case in order to calculate the strength of crusher parts. This article represents the static study of the influence of the application point of the crushing force on the forces acting on the eccentric shaft and the toggle plate of the single toggle jaw crusher. During the study, a kinematic scheme of the mechanism of the single toggle jaw crusher in the form of a four-link crank mechanism was worked out. The dependences of the angles of the rotation of the link on the angle of the eccentric shaft rotation of the crusher were obtained, which allowed determining the trajectories of different points of the swing jaw and the sections of the moving plate which crushed feeding material during the cycle. Static force analysis of the mechanism of a single toggle jaw crusher was carried out which made it possible to understand the mechanism of torque transmission to the links of crusher, determine the forces acting on the toggle plate and the eccentrics shaft bearings, as well as the shifting of application point position of the resultant crushing force along the swing plate during one stroke. The graphs of dependencies of the forces acting on the eccentric shaft and the toggle plate on the position of application point of the crushing load were built, which made it possible to determine the worst case for calculating the strength of crushers’ joints. It is established that maximum forces subjected to the eccentric shaft and the toggle plate occur when the crushing force is applied to the bottom zone of the moving plate. Such an application corresponds to the nonlinear distribution of the crushing load along the swing jaw.
4

Vandewalle, P., M. Havard, G. Claes, and F. De Vree. "Mouvements des mâchoires pharyngiennes pendant la prise de nourriture chez le Serranus scriba (Linné, 1758) (Pisces, Serranidae)." Canadian Journal of Zoology 70, no. 1 (January 1, 1992): 145–60. http://dx.doi.org/10.1139/z92-022.

Full text
APA, Harvard, Vancouver, ISO, and other styles
Abstract:
According to the morphology of its pharyngeal jaw apparatus, Serranus scriba can be considered as an intermediate type within the Acanthopterygians. The lower jaws are united only at their fore end. The upper pharyngeal jaws do not articulate with the skull base. Each of them consists of pharyngobranchials 2 and 3 (the latter being well developed), bearing a tooth plate, and of one posterior tooth plate, associated with two smaller tooth plates supported by epibranchials 2 and 3. The branchial musculature is of a generalized perciform type. Muscle activity generates variable cyclic movements of the pharyngeal jaws for transporting prey from the buccal cavity to the oesophagus, in cases where the prey is provided with a shell or a cuticle. Masticatory movements are not stereotyped as in more specialized fishes such as Labridae. Prey transport is more efficient when the upper and lower pharyngeal jaws retract together, either in complete synchrony or with a phase shift. This is often accompanied by downward movements of the upper jaws. The amplitude of movements of the components of the upper pharyngeal jaw may vary within one cycle. For instance, pharyngobranchial 2 could be drawn more forward, while pharyngobranchial 3 could be drawn more backward and the posterior tooth plate could move up and down independently. These movements can be induced passively by the interactions with the prey and (or) eventually by specific muscular activity as well. Stereotyped movements of other species probably allow them to meet only the requirements of a specialized diet. In contrast, the flexibility of this movement pattern allows S. scriba to explore a wider range of food types.
5

Zhangfeng, Zhao, Li Yanbiao, Li Wenhao, Zhan Xian, Zhu Xingliang, and Zhong Jiang. "Research on the biaxial compound pendulum jaw crusher based on seven-bar mechanism." Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 230, no. 11 (April 16, 2015): 1876–89. http://dx.doi.org/10.1177/0954406215583889.

Full text
APA, Harvard, Vancouver, ISO, and other styles
Abstract:
Traditional compound pendulum jaw crushers have many disadvantages such as low efficiency and uneven broken materials. This paper proposes a new biaxial compound pendulum jaw crusher to solve these problems. This paper presents the kinematic and dynamic performance of the new crushers, introduces its structure and layout features, derives the equations involving position, velocity, acceleration and kinetics, describes a workspace of the jaw crusher, analyzes the travel characteristic values and crushing force of movable jaw plates, and optimizes its structural and motion parameters through a multi-objective genetic algorithm. After the optimization process, the novel jaw crusher has little force on each hinge and large force on movable jaw plates. Specifically, the forces in the X-direction are 120,300 N for hinge C, 120,200 N for hinge D, and 195,000 N for hinge N; the forces in the Y-direction are 167,100 N, 162,800 N, and 197,900 N accordingly, while the breaking force of the movable jaw plate is 229,600 N. Experiments have been conducted. The results have clearly shown that the new biaxial compound pendulum jaw crusher has many advantages over conventional ones, such as the high crushing efficiency, even crushing, and large crushing force.
6

Yong, Jiang. "Research on the Kinematics Simulation of Out-Moving Jaw Crusher Based on Nastran." Applied Mechanics and Materials 433-435 (October 2013): 63–66. http://dx.doi.org/10.4028/www.scientific.net/amm.433-435.63.

Full text
APA, Harvard, Vancouver, ISO, and other styles
Abstract:
In this paper, out-moving jaw crusher machine is regarded as the research object and we established the simulation model of virtual prototype based on Nastran. Through the simulation analysis of the movement process, trajectories of moving jaw side plate and a movable jaw toggle plate and related parameters were obtained and compared and verify the simulation model and theory model. The results show that: the simulation model reflects the motion characteristics of the theoretical model well. So it provides theoretical reference for improvement of dynamic performance analysis and structure design of jaw crusher and has important application value in engineering.
7

Mu, Fu Sheng, Hui Li, Xing Xue Li, and Hong Zhi Xiong. "Jaw Crusher Based on Discrete Element Method." Applied Mechanics and Materials 312 (February 2013): 101–5. http://dx.doi.org/10.4028/www.scientific.net/amm.312.101.

Full text
APA, Harvard, Vancouver, ISO, and other styles
Abstract:
In order to analyze the force condition and crushing power of crusher teeth plate, the discrete element method models of jaw crusher and double-cavity jaw crusher are set up respectively using EDEM, a kind of software for discrete element analysis. Meanwhile, the working process, the loading force on the teeth plate and crushing power are simulated. The results show that: the rationality of the DEM simulation is declared, and the crushing process of the particles is also shown intuitively. The loading force condition and the crushing power of the moving jaw teeth plate serve as basis for its abrasion and energy consumption respectively.
8

Dawood, Andrew, Susan Tanner, and Iain Hutchison. "Computer Guided Surgery for Implant Placement and Dental Rehabilitation in a Patient Undergoing Sub-Total Mandibulectomy and Microvascular Free Flap Reconstruction." Journal of Oral Implantology 39, no. 4 (August 1, 2013): 497–502. http://dx.doi.org/10.1563/aaid-joi-d-11-00142.

Full text
APA, Harvard, Vancouver, ISO, and other styles
Abstract:
A 58-year-old patient presented with an extensive, destructive, recurrent pleomorphic adenoma occupying the mandibular body and the soft tissues of the mouth and neck. Resection of the mandible from right ramus to left condylar process, and implant rehabilitation in both jaws with fixed bridgework was planned. Comprehensive presurgical prosthetic work up was carried out to record the existing dental relationship and guide all stages of the reconstruction. The jaw was first grafted with a segmented, fibular microvascular free-flap, which was fixed in place with a fixation plate prebent on a Rapid Prototype Anatomical Model of the jaw. Reconstruction with implant supported fixed partial dentures took place to the dental scheme planned preresection, using a computer guided approach to implant placement in the complex and unfamiliar anatomy of the extensively grafted mandible. This approach facilitated and expedited implant surgery such that treatment could take place using a minimally invasive approach relatively soon after surgery, prior to commencement of radiotherapy, and highlights the importance of a multidisciplinary approach to treatment for patients having extensive surgery to the jaws. The patient's personal assessment 2 years post surgery was recorded using 1999 University of Washington Quality of Life Questionnaire.
9

Li, Shu Jun, Xiao Hang Wan, Zhao Wei Dong, and Wei Zhi Hou. "Optimization Designing of Jaw Crusher Teeth Plate Shape Based on the FEM Method." Advanced Materials Research 614-615 (December 2012): 333–36. http://dx.doi.org/10.4028/www.scientific.net/amr.614-615.333.

Full text
APA, Harvard, Vancouver, ISO, and other styles
Abstract:
The quantity of jaw crusher teeth plate consumed in crashing process directly affects the costs. Based the FEM method, the 3-D jaw crusher teeth plate shape model is established in this paper. This paper studies the stress distribution laws with three types of teeth shape. Through contrasting the results of analysis and data of malfunction teeth plate, it is can be drawing that the stress distribution laws, which can be used in optimizating design of teeth plate shape. It extends the using life and improves the crushing efficiency.
10

Reimchen, T. E. "PREDATOR HANDLING FAILURES OF LATERAL PLATE MORPHS IN GASTEROSTEUS ACULEATUS: FUNCTIONAL IMPLICATIONS FOR THE ANCESTRAL PLATE CONDITION." Behaviour 137, no. 7-8 (2000): 1081–96. http://dx.doi.org/10.1163/156853900502448.

Full text
APA, Harvard, Vancouver, ISO, and other styles
Abstract:
AbstractThe completely plated morph in the threespine stickleback (Gasterosteus aculeatus) is considered to be the ancestral plate condition and is the predominant morph inhabiting marine waters and numerous northern freshwaters. Evolutionary aspects of this distribution have been widely addressed yet functional mechanisms remain obscure. Experiments described here using the common piscivore (Oncorhynchus clarki) show that the posterior plates of G. aculeatus interfere with the swallowing abilities of the piscivore, possibly by disrupting pharyngeal jaw retraction, and this leads to increased escape opportunities of the stickleback. The advantage of the completely plated condition is most expressed at higher ratios of prey diameter to predator mouth diameter and appears to have a defensive effect comparable to that of dorsal and pelvic spines. This attribute, combined with the physical protection that plates offer against puncturing, would be particularly beneficial where there is high probability of capture by toothed predators. Such a selection regime appears to characterize the predominantly limnetic and pelagic habitats where marine stickleback are found and may account for the wide geographical distribution of the completely plated morph and its persistence from the Miocene.
More sources
You might also be interested in the extended bibliographies on the topic 'Jaw plate' for particular source types:
Journal articles Dissertations / Theses Books

Dissertations / Theses on the topic "Jaw plate":

1

Ješuta, Jiří. "Kyvadlo čelisťového drtiče 1 600 x 1 250." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2016. http://www.nusl.cz/ntk/nusl-254280.

Full text
APA, Harvard, Vancouver, ISO, and other styles
Abstract:
This thesis deals with the design of the construction of a pendulum of a single toggle jaw crusher. The first part of this thesis treats the mechanical raw minerals disintegration. In the second part the characteristics of a single toggle jaw crusher and double toggle jaw crusher are compared. The third part addresses the calculation and the construction of the main components of the jaw crusher. Next part of the thesis consists of the calculation of the crushing force, the pendulum design, and the method of manufacturing a pendulum. The strength analysis of the designed pendulum using the finite element method (FEM) in program NX-Ideas is made in the last part of this thesis.
2

Goulart, Douglas Rangel 1987. "Development of plate of osteosynthes for mandibular angle fracture with boné loss = finite elemento analysis and mechanical test = Desenvolvimento de placa de fixação interna para o tratamento de fratura complexa de ângulo mandibular: avaliação pelo método dos elementos finitos e teste mecânico." [s.n.], 2014. http://repositorio.unicamp.br/jspui/handle/REPOSIP/287887.

Full text
APA, Harvard, Vancouver, ISO, and other styles
Abstract:
Orientador: Márcio de Moraes
Dissertação (mestrado) - Universidade Estadual de Campinas, Faculdade de Odontologia de Piracicaba
Made available in DSpace on 2018-08-24T09:12:42Z (GMT). No. of bitstreams: 1 Goulart_DouglasRangel_M.pdf: 2699898 bytes, checksum: e7d2281b73e4ff46b282bf86177c5b1a (MD5) Previous issue date: 2014
Resumo: Apesar da evolução do tratamento das fraturas de ângulo mandibular, o conhecimento torna-se restrito quando se trata de fraturas com múltiplos traços ou perda de estrutura óssea, devido à falta de investigações específicas na área. Dessa forma, o objetivo desse trabalho é desenvolver e avaliar um novo design de placa de fixação interna para tratamento de fraturas complexas de ângulo mandibular por meio do método dos elementos finitos e teste de carregamento linear. Primeiramente foi gerado um modelo tridimensional da mandíbula fraturada no software Rhinocerus 4.0, seguida pela modelagem de placas e parafusos do sistema 2,0 mm. Os modelos foram exportados para o Ansys®, no qual foi aplicado deslocamento de 3 mm no rebordo alveolar na região que corresponde a fossa central do primeiro molar ipsilateral a fratura. Foram avaliados três grupos segundo o método de fixação interna: duas placas do sistema 2,0 mm; duas placas do sistema 2,0 mm locking; e uma placa com novo design do sistema 2,0 mm locking. O modelo computacional foi transferido para um modelo in vitro com mandíbulas de poliuretano, com os mesmos grupos de fixação e padrão de fratura mandibular. Cada grupo foi composto por cinco mandíbulas, cada amostra foi submetida ao teste de carregamento linear na máquina de ensaio universal Instron modelo 4411 até o deslocamento de 5 mm. Para o modelo computacional foi observada uma distribuição mais equilibrada de tensão no novo design de placa, além disso, a fixação com a nova placa apresentou uma tendência de manter os segmentos aproximados. Porém foi observada superioridade da força de reação do grupo com duas placas 2,0 mm locking (651,67 N). No ensaio mecânico o grupo com duas placas locking apresentou maior resistência ao deslocamento de 3 mm com diferenças estatisticamente significativa que o grupo da nova placa (one-way ANOVA; F = 4,92, p = ,013). Foi desenvolvido um modelo de placa para o tratamento de fratura de ângulo mandibular, que na análise de elementos finitos apresentou uma distribuição mais equilibrada das tensões, porém o grupo com duas placas locking apresentou maior resistência mecânica. A nova placa pode substituir duas placas convencionais sem prejuízo de resistência mecânica e com vantagens de apresentar a tendência de manter os segmentos fraturados aproximados quando submetidos a deslocamento
Abstract: Despite the developments concerning the treatment of mandibular angle fractures, knowledge becomes limited when it comes to multiple fractures lines or loss of bone due to the lack of specific investigation in this field. Thus, the aim of this work is developing and evaluating a new design of internal fixation plate for the treatment of the complex mandibular fractures by the finite element method and mechanical testing. A three dimensional model of the fractured mandible was generated in Rhinocerus 4.0 software, and also was performed the modeling of the 2.0 mm system plates. The models have been exported to ANSYS ®, in which it was performed a static application of a force to generate displacement of 3 mm in the first molar region ipsilateral to the fracture. Three groups were evaluated according to the method of internal fixation: two plates of the 2.0 mm non-locking system, two plates of 2.0 mm locking system, and a plate with new design 2.0mm locking system. The computational model was transferred to an in vitro experiment with polyurethane mandibles with the same fixation groups and fracture pattern. Each group with five mandibles was subjected to linear loading test in a universal testing machine Instron Model 4411 to the displacement of 5 mm. A more balanced distribution of stress in the new plate design was observed. In addition, the new plate modified the mechanical behavior of the fractured region with a tendency to keep the approximate segments. However, the superiority of the reaction force of the group with two 2.0mm locking plates was observed (651.67 N). In the mechanical test the group with two locking plates showed greater resistance to the 3 mm displacement with statistically significant difference than the new plate group ( one-way ANOVA , F = 4.92 , p = 013)
Mestrado
Cirurgia e Traumatologia Buco-Maxilo-Faciais
Mestre em Clínica Odontológica
3

Bäckström, Amanda. ""Vem är jag på denna kulturella plats?" : – En studie om ungas, äldres och det offentligas uppfattningar av Arvikas kultur och platsidentitet." Thesis, Karlstads universitet, Fakulteten för humaniora och samhällsvetenskap (from 2013), 2016. http://urn.kb.se/resolve?urn=urn:nbn:se:kau:diva-44530.

Full text
APA, Harvard, Vancouver, ISO, and other styles
Abstract:
Denna uppsats handlar om Arvika i västra Värmland som bland annat är känt för sitt rika kulturliv. Kultur är ett differentierat begrepp som har olika definitioner beroende på vad man syftar på och vem man frågar. Uppsatsens syfte är att utskilja om det finns en officiell bild av Arvikas kultur och om äldre och unga personer har en annan bild för att förstå om kulturen har betydelse för platsens identitet. Resultatet blev att bilderna till viss del ser olika ut men även att de liknar varandra. Bilden av Arvikas kultur är ofta estetisk men olika individer snarare än olika grupper hade skilda åsikter om vad de definierar som kultur samt hur de identifierar sig med den och platsen.
This senior essay is about the town of Arvika, in Western Värmland, Sweden. Arvika is famous, among other things, for its rich cultural life. Culture is a difficult concept that has many meanings depending on who you ask. The paper tries to highlight or draw out the official perceptions of Arvika´s culture and whether the elderly and the young inhabitants have a different image and perception of Arvika´s culture. The essay examines the importance of culture for the (place) identity of Arvika. The study found out that the official and ”popular” images of Arvika on the whole are similar, but diverse as well. The images of Arvka´s culture are often aesthetic. The differences are individual rather than age or group related.
4

Zander, Robin. "Jag flyttar aldrig från Gröna linjen : En studie om identitet och plats." Thesis, Stockholms universitet, Etnologi, 2016. http://urn.kb.se/resolve?urn=urn:nbn:se:su:diva-134726.

Full text
APA, Harvard, Vancouver, ISO, and other styles
Abstract:
Tunnelbanan knyter ihop stora delar av staden. Det finns människor som gärna vill bo kvar runt den t-banelinje de bor på. I denna uppsats analyseras intervjuer med fem personer som bor i stadsdelar dit den Gröna t-banelinjen går. Det undersöks hur t-banan medverkar till att bygga upp identiteten var och en skapat sig under tiden som boende på platsen. Undersökningen tar reda på hur varje person blivit en del av platsen de bor på, och hur platsen har blivit en del av dem. Med hjälp av intervjuerna tas det också reda på vad tunnelbanan kan ha för betydelse utöver att vara ett transportmedel. Studiens resultat visar att tunnelbanan bidragit till platstillhörighet, trivsel och identitetsbygge, men att platsen kan vara rörlig. Personerna kan känna tillhörighet till flera platser, genom möjlighet till rörlighet som tunnelbanan bidragit med. Resultatet visar också att tunnelbanan kan betyda något mer än att vara ett transportmedel, den är såväl landmärke som markör för urbanitet.
5

Fňukal, Jan. "Deformační a napěťová analýza dolní čelisti s aplikovaným fixátorem v důsledku deficitu kostní tkáně." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2017. http://www.nusl.cz/ntk/nusl-318654.

Full text
APA, Harvard, Vancouver, ISO, and other styles
Abstract:
This thesis deals with the fixation of lower jaw with bone tissue defect using commercially produced fixator. Large defects of bone tissue are mainly caused due to the removal of bone tissue affected by tumor. These topics have been researched on the basis of the literature. Subsequently, stress strain analysis of the lower jaw with the applied fixation plate was performed. This analysis was solved by using computational modeling with variational approach, ie the finite element method. The work also describes in detail the procedure of creating model of geometry, model of material, model of boundary conditions and loads with subsequent solution of several computational models. The stress strain analysis was done for lower jaw with varying size of the removed bone tissue with applied reconstruction plate made of CP-Ti Grade 4 and for the lower jaw with the plate, which is made of -Ti-Mo. Finally, the influence of the mechanical properties of the callus during formation of new bone tissue (callus healing) on the stress and deformation of the solved system was evaluated.
6

Plath, Jan [Verfasser]. "Computergestützte Konstruktion von Massschuhen / Jan Plath." Aachen : Shaker, 2004. http://d-nb.info/1170529631/34.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

La, Magna Riccardo [Verfasser], and Jan [Akademischer Betreuer] Knippers. "Bending-active plates : strategies for the induction of curvature through the means of elastic bending of plate-based structures / Riccardo La Magna ; Betreuer: Jan Knippers." Stuttgart : Universitätsbibliothek der Universität Stuttgart, 2017. http://d-nb.info/1148426345/34.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Chambers, Jonathan Perry. "The Urban Place: Places for Jay to Sit." Thesis, Virginia Tech, 1998. http://hdl.handle.net/10919/36970.

Full text
APA, Harvard, Vancouver, ISO, and other styles
Abstract:
This thesis is an exploration of the design of successful urban places, those that are filled with people enjoying the vitality present in a density of life. The inspiration for this thesis came from a statement made by Jason Bergen. While walking through downtown Blacksburg, unsuccessful in our quest to find a place sit down and eat lunch, Jay said, "You know Jon, there are no good places to sit in Blacksburg." Without realizing it, Jay had made a simple observation that can be used to assess the quality of an urban environment.
Master of Architecture
9

Pelouch, Adam. "Řešení statického zajištění přístavby stávajícího objektu." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2021. http://www.nusl.cz/ntk/nusl-444632.

Full text
APA, Harvard, Vancouver, ISO, and other styles
Abstract:
Diploma thesis is focused on structural assessment and strengthening of the reinforced concrete flor slab disturbed by excessive deflection. Thesis included assesment of the existing construction and design method of strengthening of the floor structure with system using prestressing strands without bond.
10

Vikman, Jonna. "Breaking the Bell Jar? Femininity in Virginia Woolf’s To The Lighthouse and Sylvia Plath’s The Bell Jar." Thesis, University of Gävle, Department of Humanities, 2010. http://urn.kb.se/resolve?urn=urn:nbn:se:hig:diva-7393.

Full text
APA, Harvard, Vancouver, ISO, and other styles
Abstract:

This essay focuses on female identity formation in patriarchal society in Virginia Woolf’s To The Lighthouse and Sylvia Plath’s The Bell Jar. Both authors portray female characters who struggle with the normative gender identity. As the novels represent different eras and locations, the two characters examined in this essay, Woolf’s Lily Briscoe and Plath’s Esther Greenwood, have very little in common on the surface. However, both authors deliver similar feminist social criticism concerning the negative impact of patriarchal norms on female identity formation. This study analyzes some of these external constraints, or norms, and aims to prove that the two female characters’ ideas of womanhood and identity collide in a similar manner with those norms. Schachter’s study on identity constraints in identity formation and Sanchez and Crocker’s research on gender ideals work as the theoretical background in the study. The negative influence on Lily’s and Esther’s identity formation is similar since both characters live under a symbolical bell jar, unable to form their identity according to their own preferences. Patriarchal conventions remain a constant constraint and the two women keep struggling to find a balance between their own ideas and those of their societies. Both Lily and Esther grow to understand their own traits, desires and abilities in their respective stories, but fail to reach their preferred identity. Their resistance to adapt to gender conventions helps them to form a stronger identity, but it is an identity that remains profoundly and negatively influenced by the patriarchal norms of their societies.

More sources

Books on the topic "Jaw plate":

1

Charles, Peterson. Pearl Jam: Place/date. Seattle: Ten Club, 1999.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
2

Charles, Peterson. Pearl Jam: Place/date. New York: Universe, 1999.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
3

Bartoszewski, Piotr M. Samolot mys liwski Jak-23. Warszawa: Wydawn. Ministerstwa Obrony Narodowej, 1987.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
4

Huelin, Jodi. Jay Jay earns his wings. New York, NY: Price Stern Sloan, 2002.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
5

Larsen, Kirsten. Christmas in Tarrytown. New York: Price Stern Sloan, 2003.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
6

Sarwiyono, Ratih. Ki Ageng Suryomentaram: Sang Plato dari Jawa. Yogyakarta: Cemerlang Pub., 2007.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
7

Reiff, Raychel Haugrud. Sylvia Plath: The bell jar and poems. New York: Marshall Cavendish Benchmark, 2008.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
8

Reiff, Raychel Haugrud. Sylvia Plath: The bell jar and poems. New York: Marshall Cavendish Benchmark, 2008.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
9

Larsen, Kirsten. Jay Jay's Christmas adventure. New York, N.Y: Price Stern Sloan, 2002.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
10

Säfve, Torbjörn. "Dygden har jag platt försummat": Romanen om Lasse Lucidor. [Stockholm]: Rabén Prisma, 1995.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Book chapters on the topic "Jaw plate":

1

Wagner-Martin, Linda. "Recalling the Bell Jar." In Sylvia Plath, 33–41. London: Palgrave Macmillan UK, 2003. http://dx.doi.org/10.1057/9780230505926_4.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Wagner-Martin, Linda. "Lifting the Bell Jar." In Sylvia Plath, 42–53. London: Palgrave Macmillan UK, 2003. http://dx.doi.org/10.1057/9780230505926_5.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Wagner-Martin, Linda. "Recalling the Bell Jar." In Sylvia Plath, 33–41. London: Palgrave Macmillan UK, 1999. http://dx.doi.org/10.1007/978-1-349-27527-4_4.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Wagner-Martin, Linda. "Lifting the Bell Jar." In Sylvia Plath, 42–53. London: Palgrave Macmillan UK, 1999. http://dx.doi.org/10.1007/978-1-349-27527-4_5.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Bronfen, Elisabeth, and Astrid Franke. "Plath, Sylvia: The Bell Jar." In Kindlers Literatur Lexikon (KLL), 1–2. Stuttgart: J.B. Metzler, 2020. http://dx.doi.org/10.1007/978-3-476-05728-0_12323-1.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Rao, Anil S. "Geometry of Parallel-Jaw Gripper Grasps in the Plane." In Advances in Robot Kinematics and Computational Geometry, 91–100. Dordrecht: Springer Netherlands, 1994. http://dx.doi.org/10.1007/978-94-015-8348-0_9.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Choi, Jong-Woo, and Jang Yeol Lee. "Occlusal Plane-Altering Orthognathic Surgery (Jaw Rotational Orthognathic Surgery)." In The Surgery-First Orthognathic Approach, 345–64. Singapore: Springer Singapore, 2021. http://dx.doi.org/10.1007/978-981-15-7541-9_16.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Bobik, Grzegorz, Jarosław Żmudzki, and Tomasz Tański. "Simulation Investigation of Occlusal Loads Transfer in Personalized Titanium Plates in the Case of Jaw Osteotomy." In Innovations in Biomedical Engineering, 89–95. Cham: Springer International Publishing, 2020. http://dx.doi.org/10.1007/978-3-030-52180-6_11.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Blecha, Ivan. "Husserlův Platón." In Filosofie jako životní cesta, 108–18. Brno: Masaryk University Press, 2019. http://dx.doi.org/10.5817/cz.muni.p210-9458-2019-6.

Full text
APA, Harvard, Vancouver, ISO, and other styles
Abstract:
Unlike Martin Heidegger, who was always critical of Plato’s role in the history of philosophy, and Jan Patočka, who was more charitable but still had serious misgivings about Plato, Edmund Husserl saw Plato truly positively. However, his view resulted from the fact that he had simplified Plato’s theory substantially and adapted it to his own view of philosophy. According to Husserl, Plato was an inspirational figure as a founder of philosophical ‘theory of science’, and because he sought abstract knowledge of the Forms, he could serve as a useful contrast to the one-sided philosophy of modern empiricism. This paper attempts to present Husserl’s position in a greater detail and assess it.
10

Jemelka, Petr. "Jan Zouhar jubilující – aneb Co není ve slovníku." In Filosofie jako životní cesta, 44–51. Brno: Masaryk University Press, 2019. http://dx.doi.org/10.5817/cz.muni.p210-9458-2019-1.

Full text
APA, Harvard, Vancouver, ISO, and other styles
Abstract:
The text introduces Jan Zouhar as an important representative of contemporary Czech philosophy. It is an attempt to cover the breadth of his philosophical thinking, which extends from the historiography of Czech philosophy to some remarkable overlaps. For instance, we can mention the position of philosophy in the context of our spiritual culture, the place and role of tradition at present, and a reflection on the role that philosophy plays in human life.

Conference papers on the topic "Jaw plate":

1

Cao Jinxi, Rong Xingfu, and Yang Shichun. "Jaw plate kinematical analysis for single toggle jaw crusher design." In International Technology and Innovation Conference 2006 (ITIC 2006). IEE, 2006. http://dx.doi.org/10.1049/cp:20060729.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Grabowski, G. J. "Stratigraphy and Depositional History of the Marib-Jawf Basin, Yemen." In Fourth Arabian Plate Geology Workshop. Netherlands: EAGE Publications BV, 2012. http://dx.doi.org/10.3997/2214-4609.20142784.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Clarke, Richard, Anthony Sances, Srirangam Kumaresan, and Steve Syson. "Analysis of Side Release Motor Vehicle Seat Belt Buckles." In ASME 2004 International Mechanical Engineering Congress and Exposition. ASMEDC, 2004. http://dx.doi.org/10.1115/imece2004-59293.

Full text
APA, Harvard, Vancouver, ISO, and other styles
Abstract:
The purpose of the current study was to evaluate the likelihood of inertial release of various production side release automotive seat belt buckles under acceleration loading conditions that could be expected to occur in real world accident events. Each test sample was secured to a specially designed vertical acceleration test fixture. This produced a rigid mount, which allowed impacts to be transmitted to the test buckle. A commercially available M/RAD 0909 Pneumatic Shock Machine was used to control the magnitude, shape and duration of the pulses transmitted to the fixture and test buckle. To measure and analyze the shock pulse generated by the M/RAD Pneumatic Shock Machine, an M/RAD SRA-1200 Shock Instrumentation System was used with the capacity to capture, display and analyze half-sine, saw tooth and square wave pulses. A display screen and computer printouts record peak accelerations, pulse durations and change in velocity. An ICP 305A04 accelerometer was attached to the base of the test fixture. All information was recorded at a rate of 8 kHz and was filtered using a digital four pole Butterworth zero phase shift filter, and a low pass filtering system set at L-P1 with a cutoff of 1100 Hz. The current test fixture was designed to accommodate various production side release buckles with interchangeable jaw plates, for the different style buckles, to provide a “rigid mount.” A constant load can be placed on the latch plate and can be varied from 4 to 133 N. The forces for a fixed latch side buckle did not open upto accelerations of about 480 G’s. In contrast, unprotected side release buckle released at accelerations of about one fourth that of protected.
4

Jinxi, Cao, Qin Zhiyu, Wang Guopeng, Rong Xingfu, and Yang Shichun. "Investigation on Kinetic Features of Multi-Liners in Coupler Plane of Single Toggle Jaw Crusher." In 2007 2nd IEEE Conference on Industrial Electronics and Applications. IEEE, 2007. http://dx.doi.org/10.1109/iciea.2007.4318687.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Hutchings, Jonathon J., and Enoch W. Small. "Energy windowing with Hamamatsu microchannel plate photomultipliers." In OE/LASE '90, 14-19 Jan., Los Angeles, CA, edited by Joseph R. Lakowicz. SPIE, 1990. http://dx.doi.org/10.1117/12.17727.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Badawy, Mona M., Hend A. Malhat, and Saber H. Zainud-Deen. "Broadside/Endfire Switched Beam Double Ridge-Gap Waveguide H-plane Horn Antenna." In 2019 7th International Japan-Africa Conference on Electronics, Communications, and Computations, (JAC-ECC). IEEE, 2019. http://dx.doi.org/10.1109/jac-ecc48896.2019.9051271.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Tengborn, L., and A. Wallmark. "ALTERATIONS IN THE COAGULATION AND FIBRINOLYTIC SYSTEMS AS PREDISPOSING FACTORS IN THE DEVELOPMENT OF DEEP VENOUS THROMBOSIS (DVT)." In XIth International Congress on Thrombosis and Haemostasis. Schattauer GmbH, 1987. http://dx.doi.org/10.1055/s-0038-1644203.

Full text
APA, Harvard, Vancouver, ISO, and other styles
Abstract:
From Jan. 1982 to Jan. 1987, 1213 patients were investigated either because of thrombotic episode(s) or thrombosis heredity. Diagnosis of DVT was confirmed by phlebography in 567 cases. Patients were first examined at least three months after an acute episode.Methods. Anti thrombin (AT) and plasminogen were assayed, using chromogenic substrates S-2238 and S-2251 , respectively, followed if values were low by immunochemical assessment. Furthermore, fibrinogen, thrombin and reptilase times, APTT, P…P were assessed. Only in the latter study period was protein C activity determined (129 cases). Fibrinolysis was assayed on fibrin plates after 20 min venous occlusion of the arms. In 1984 only, plasminogen activator inhibitor of endothelial cell type (PAI 1) was measured in most DVT patients (n=75).Results. DVT first occurred by the age of 45 in 337 patients, of whom five had AT deficiency (four classic and one abnormal), one had low and another abnormal plasminogen), one had abnormal fibrinogen, seven had lupus anticoagulants (LA), and 72 (21%) had decreased lysis on fibrin plates. Defective fibrinolysis was re-investigated in 42 patients; at check-up 13 were found to have normalised. Of the 75 patients from 1984, fibrinolysis on fibrin plates was normal in 50 cases, of which PAI 1 was normal in 44 and increased in six; of the remaining 25 patients from 1984, fibrin plate activity was decreased, PAI 1 was normal in five cases and increased in 20.DVT first occurred after the age of 45 in 230 patients, of whom none had pathological AT or protein C, five had LA, and one had abnormal plasminogen; of the 51 (22%) patients found to have defective fibrinolysis, 29 were re-investigated at check-up and 14 of them found to have normalised.Conclusion. Alterations in coagulation inhibitors are rare in patients with DVT. A more frequent finding, although intraindividual fluctuations occur, is defective vessel wall fibrinolysis.
8

Eng, Richard S. "Signal isolation capability of rotating-wave-plate type electro-optic modulators." In OE/LASE '90, 14-19 Jan., Los Angeles, CA, edited by Richard J. Becherer. SPIE, 1990. http://dx.doi.org/10.1117/12.18372.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Mick, T., K. Means, J. Etherton, J. Powers, and E. A. McKenzie. "Design Recommendations for Controlling the Jam-Clearing Hazard on Recycling Industry Balers." In ASME 2005 International Mechanical Engineering Congress and Exposition. ASMEDC, 2005. http://dx.doi.org/10.1115/imece2005-79699.

Full text
APA, Harvard, Vancouver, ISO, and other styles
Abstract:
Between 1986 and 2002, there were 43 fatalities in the United States to operators of recycling industry balers. Of these fatalities, 29 involved horizontal balers that were baling paper and cardboard (Taylor, 2002). Balers often become jammed while the baling process is occurring, and the only way to remove the jam is manually. This requires an employee to place a limb of their body into the jamming area and remove the material that is causing the jam. While lockout and tagout procedures reduce the risk of hazardous energy being released, they can still be easily bypassed, ignored, or forgotten. Recent efforts to reduce machine-related injury and death involve the development of a control system for these machines that automatically detects hazardous operating conditions and responds accordingly. The system is being developed at the National Institute for Occupational Safety and Health (NIOSH). This system, JamAlert, automatically terminates the power to the machine when a jam is detected. JamAlert detects a jam by observing both the strain that is experienced by the shear bar of the baler and the hydraulic pressure at which the ram is operating. The strain that is experienced by the baler shear bar when a jam is initiated was calculated in this study through laboratory testing and finite element modeling. Design recommendations are presented on how best to tune the JamAlert’s operating program to most effectively control the jam-clearing hazard.
10

Urquhart, Kristopher S., Hamid Farhoosh, and Sing H. Lee. "Diffractive lenses utilizing orthogonal cylindrical Fresnel zone plates." In OE/LASE '90, 14-19 Jan., Los Angeles, CA, edited by Ivan Cindrich and Sing H. Lee. SPIE, 1990. http://dx.doi.org/10.1117/12.17937.

Full text
APA, Harvard, Vancouver, ISO, and other styles

To the bibliography