Log in

Relevant bibliographies by topics / Jumper Wires / Journal articles

To see the other types of publications on this topic, follow the link: Jumper Wires.

Journal articles on the topic 'Jumper Wires'

Author: Grafiati

Published: 2 June 2025

Last updated: 31 July 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the top 50 journal articles for your research on the topic 'Jumper Wires.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Browse journal articles on a wide variety of disciplines and organise your bibliography correctly.

1

He, Peng, Jiceng Han, Yongjie Li, Cheng He, and Wenkai Xiao. "Research on Failure Mechanisms of Broken Strands of Jumper Wires for EHV Transmission Lines in Strong-Wind Areas." Metals 10, no. 1 (2019): 39. http://dx.doi.org/10.3390/met10010039.

Full text

Abstract:

The jumper wires of an extra-high voltage (EHV) transmission line in strong-wind areas in Northwest China frequently break down. We installed some acquisition devices to collect the data of the jumper wires and wind speed in the fault area of one 750-kV transmission line. We also developed a swing simulation machine based on the collected data. The machine could simulate the swing condition of the jumper wires under various wind speeds. We analyzed the broken aluminum wires obtained from the simulation experiment of jumper wires. Yield lines appeared on the surface of the broken aluminum wires

APA, Harvard, Vancouver, ISO, and other styles

2

Sai, Kunchala. "Automatic Street Lights Using Arduino." INTERANTIONAL JOURNAL OF SCIENTIFIC RESEARCH IN ENGINEERING AND MANAGEMENT 09, no. 01 (2025): 1–9. https://doi.org/10.55041/ijsrem41047.

Full text

Abstract:

- The increasing demand for energy-efficient solutions has led to innovative technologies like automatic street lighting systems. This research paper presents a comprehensive study and implementation of a cost-effective automatic street light system utilizing LEDs, ultrasonic sensors, 1k resistors, Arduino Uno, and jumper wires. The system operates by detecting vehicles using ultrasonic sensors, which triggers the LEDs to illuminate, thereby conserving energy when no vehicles are present. This paper discusses the design, working mechanism, advantages, challenges, and future applications of the

APA, Harvard, Vancouver, ISO, and other styles

3

Naskar, Jeet, Pretty Ghosh, Sayan Ghosh, Shreya Nag, and Shambhu Sharan Kumar Sinha. "Electronic Obstacle Detector Spectacles for the VisuallyImpaireds without Microcontroller." International Journal of Engineering Research and Applications 14, no. 7 (2024): 54–57. http://dx.doi.org/10.9790/9622-14075457.

Full text

Abstract:

This study introduces a noble approach to a low budget and easy to use obstacle detector spectacles for visuallyimpaired people. A normal protection spectacle has been modified using a small circuit made off a driver network and an ultrasonic proximity sensor. The sensing mechanism bashed on transmitting ultrasonic sound signal and processing the reflected signals reflected by the object has to be synced. A NE555 timer IC along with some other passive components (resistors & capacitors) has been used as driver circuit. A piezoelectric buzzer has been used to give the sound output as warnin

APA, Harvard, Vancouver, ISO, and other styles

4

Vasjanov, Aleksandr, and Vaidotas Barzdenas. "Surface-Mount Zero-Ohm Jumper Resistor Characterization in High-Speed Controlled Impedance Transmission Lines." Sensors 23, no. 9 (2023): 4472. http://dx.doi.org/10.3390/s23094472.

Full text

Abstract:

Zero-ohm resistors, also known as jumpers, are commonly used in early radio frequency (RF) prototypes as they can help engineers identify the most optimal engineering solution for their system or create application-specific hardware configurations in products. One of the key considerations when using zero-ohm jumpers in RF circuits is the potential for signal loss and interference. Every circuit connection creates a small amount of resistance and impedance, eventually adding up over long distances or in complex circuits. This paper proposes a quantitative characterization summary of standard 0

APA, Harvard, Vancouver, ISO, and other styles

5

Odoemelam, Paul Onyedikachi, Joseph Ijeoma Onwuemeka, Doris Nwakaego Ndubueze, et al. "AI-Robotic Vehicle for Distribution of Pharmaceutical Products." International Journal of Advances in Engineering and Management 6, no. 10 (2024): 382–88. https://doi.org/10.35629/5252-0610382388.

Full text

Abstract:

A robotic car is a car with artificial intelligence and the ability to drive itself without any human interaction most especially during the time of COVID-19. The basic operation was achieved using some Arduino components such as solderless breadboard, motor driver module, jumper wires, motor chassis, four tires, Arduino Uno and Arduino IDE, etc built with a microcontroller (ATMEGA328P). This work describes the development from scratch of a complete autonomous robotic car for pharmaceutical purposes. The outcome suggests that the car helps in pharmacies for delivering of pharmaceutical product

APA, Harvard, Vancouver, ISO, and other styles

6

Kale, Rohan, Vedashree Gujar, and Deepa Athawale. "IOT Based Smart Parking System." INTERANTIONAL JOURNAL OF SCIENTIFIC RESEARCH IN ENGINEERING AND MANAGEMENT 09, no. 04 (2025): 1–9. https://doi.org/10.55041/ijsrem44109.

Full text

Abstract:

As the number of vehicles increased rapidly, parking has been turned into a serious issue, particularly in vast spaces. Conventional parking systems are based on manual work and hence suffer from inefficiency, congestion, and lateness. To address these problems, we introduce an IoT-based Smart Parking System that can automatically detect parking slots, security, and payment processes. With the help of RFID technology, Arduino Uno, IR sensors, and a servo motor, the system improves security, minimizes human intervention, and maximizes parking space utilization. The method enhances parking effic

APA, Harvard, Vancouver, ISO, and other styles

7

Savitha, A. C., Kumar KM Madhu, Lavanya, Prerana M, K. Monisha, and Nayak Padmini. "Integrated IOT Based Smart Notice Board." Journal of Scholastic Engineering Science and Management (JSESM), A Peer Reviewed Universities Refereed Multidisciplinary Research Journal 4, no. 5 (2025): 38–42. https://doi.org/10.5281/zenodo.15393522.

Full text

Abstract:

The Wireless Smart Notice Board using Arduino and IoT is an innovative project designed to modernize the traditional notice board by enabling remote communication and dynamic message display. This system leverages Arduino microcontroller technology, Bluetooth connectivity, and IoT principles to offer a user-friendly and efficient platform for message dissemination in schools, offices, hospitals, and public spaces.The core components of the project include the DHT11 Humidity and Temperature Sensor module, the HC-05 Bluetooth module, a JHD 16x2 Character LCD Display, USB A-B cable, and male-to-m

APA, Harvard, Vancouver, ISO, and other styles

8

Pandey, Rajesh, Avinav Pathak, Rohit Vats, and Nidheesh Sharma. "Internet of Things Based Approach to Detect Obstacle in Fog to Avoid Accidents." Journal of University of Shanghai for Science and Technology 23, no. 06 (2021): 912–18. http://dx.doi.org/10.51201/jusst/21/05323.

Full text

Abstract:

Human life is of the utmost importance. Every year, many people lose their lives in road accidents. Reasons for an accident are many like over-speeding, poor traffic system, drink and drive, rough driving, etc. this paper aims to develop a model that can be used in vehicles to identify accidents due to Zero visibility in fog in winters and alarming for the same to avoid it. IoT is an emerging technology and can be intensively used for intelligent transport systems. This paper aims to develop an automated IoT-enabled system to be used in cars for the detection and avoidance of accidents due to

APA, Harvard, Vancouver, ISO, and other styles

9

Ghosh, Chandril. "Application of Internet of Things for Smart Gardening System." International Journal for Research in Applied Science and Engineering Technology 13, no. 6 (2025): 1819–24. https://doi.org/10.22214/ijraset.2025.72531.

Full text

Abstract:

In this paper we have presented an IOT based Smart Gardening system to control the moisture of soil. This technique actually measure the moisture of soil and if the moister level is below the user defined threshold value then the motor starts automatically and power on the water pump. If it reaches or crosses the threshold value it stops the motor. This is done with wireless moisture sensors that communicate with the smart gardening controls and also give the information about the water requirement for gardening. It uses ARDUINO-Mini as the microcontroller which is the core part of the system.

APA, Harvard, Vancouver, ISO, and other styles

10

K., Ravikiran, Shekhapur Tukaram, K. Hema Sai Kiran, Afridhi, P. K. Abhilash, and Farah Maarfi. "Creating a Sustainable Smart Water Leakage Detection System using IoT." E3S Web of Conferences 430 (2023): 01093. http://dx.doi.org/10.1051/e3sconf/202343001093.

Full text

Abstract:

Water pipe spillage, especially in drinking water frameworks, could be a noteworthy sustainable issue universally, driving to the wastage of valuable assets. Recognizing the significance of water for all shapes of life, it gets to be pivotal to create sustainable arrangements to address this issue. The aim of this venture is to form an Online of Things (IoT) based framework for water spillage discovery utilizing water stream sensors and an Arduino board. The concept behind this extend is to degree the sum of water provided from the source and compare it with the amount of water gotten at the d

APA, Harvard, Vancouver, ISO, and other styles

11

Chaflekar, Ms S. H. "Automated Light System Using IOT." International Journal for Research in Applied Science and Engineering Technology 13, no. 5 (2025): 1684–89. https://doi.org/10.22214/ijraset.2025.70557.

Full text

Abstract:

The proposed project focuses on developing an Automated Light System Using IOT designed to enhance energy efficiency by controlling lighting based on human motion. The system utilizes a PIR (Passive Infrared) sensor to detect human presence. When motion is detected, the light will automatically turn on. The system operates with both AC (Alternating Current) and DC (Direct Current) power sources and is controlled via an Arduino microcontroller, ensuring seamless automation. The integration of jumper wires allows easy connection of components such as the relay, bulb, PIR sensor, and AC power cir

APA, Harvard, Vancouver, ISO, and other styles

12

C.K., Gomathy, Priya G.G.Lasya, and Kumar K.N Hemanth. "A Study on IoT Based Flood Detection Management System." International Journal of Engineering and Advanced Technology (IJEAT) 10, no. 4 (2021): 130–33. https://doi.org/10.35940/ijeat.D2407.0410421.

Full text

Abstract:

Over the past few years we can see there is an occurrence of floods at different parts of the world almost every year. The technical advancements in recent years have made it easier to get a solution for these natural disasters. One of such technologies which takes us much closer to the internet is the “Internet of Things”. This paper consists of flood detection and avoidance system using the iot technology. The sensors present in this are used to estimate the water levels, humidity, and temperature and send the real-time data to the cloud and the users can access the data via the

APA, Harvard, Vancouver, ISO, and other styles

13

Sowmya, G., G. Divya Jyothi, N. Shirisha, K. Navya, and B. Padmaja. "Iot Based Smart Door Lock System." International Journal of Engineering & Technology 7, no. 3.6 (2018): 223. http://dx.doi.org/10.14419/ijet.v7i3.6.14975.

Full text

Abstract:

These days’ people are sky rocketing in technological advancements. This ushered to a lifestyle that’s become a child’s play. We are in pursuit of emerged advanced technologies and software with every single passing day. In the huge efforts of making our lives simpler and better we are contributing a fraction of a part through our project – SMART DOORS. Smart doors are a simple project that assists people in gaining the control to access the doors. Smart doors project prevents the entry of unauthorized personnel. This uses a simple Arduino board with a few lines of code dumped in it, a hexadec

APA, Harvard, Vancouver, ISO, and other styles

14

Krishna, Mr V. Radha, K. Vijaya, M. Hrishithi, V. Richa Sanjitha, and P. Varshitha. "Smart Solar Powered Battery System for EV for IoT Voltage Monitoring." International Journal for Research in Applied Science and Engineering Technology 11, no. 10 (2023): 2088–92. http://dx.doi.org/10.22214/ijraset.2023.56423.

Full text

Abstract:

Abstract: This paper presents a Smart Solar-Powered Battery System for Electric Vehicles (EVs) enhanced with Internet of Things (IoT) voltage monitoring, featuring a robust combination of components. Utilizing ESP32, Solar Panels, Breadboard, PCB, Voltage Sensor, Liquid Crystal Display, BJT, Battery, Jumper Wires, USB Cable, Arduino IDE, and BlynkIoT, this system embodies a sustainable and efficient EV charging infrastructure. The integration of solar panels within the system capitalizes on solar energy, diminishing the environmental impact of EV charging while reinforcing grid resilience. The

APA, Harvard, Vancouver, ISO, and other styles

15

Apurv, Singh, Yadav Anushka, Punem Kushal, Sahu Urmi, Prasad Kauleshwar, and Kumar Bhawnani Dinesh. "Object Detection and Tracking System (ODTP)." Research and Reviews: Advancement in Robotics 5, no. 1 (2022): 1–6. https://doi.org/10.5281/zenodo.6629732.

Full text

Abstract:

ODTP is an object detection system that uses Microwaves. Microwaves are radio waves which uses soundwaves to determine the Distance as well as Speed of the object. In this project, we can also predict the time of approach of the moving object. This project mainly focuses on making a Radar System that is cheaper and more efficient. In this paper, we designed a radar combined with an object detection system using 4 Ultrasonic sensors, Arduino UNO R3, Breadboard, Jumper wires, LEDs, Resistors and for displaying the output we have used an OLED display. The model detects any object be it still or m

APA, Harvard, Vancouver, ISO, and other styles

16

Ciby, Amruth K., Archana V S, Anand V, and Dr Rajesh K S. "Robotic Bin (Ro-Bin)." INTERANTIONAL JOURNAL OF SCIENTIFIC RESEARCH IN ENGINEERING AND MANAGEMENT 09, no. 03 (2025): 1–9. https://doi.org/10.55041/ijsrem42386.

Full text

Abstract:

This paper presents the development and implementation of an Arduino-based Robotic bin designed to enhance waste management efficiency. The Robotic bin leverages various components, including an ultrasonic sensor for level detection, an Arduino Nano microcontroller, a servo motor for lid automation, and various other supporting components such as jumper wires, and an ultrasonic sensor. The system is programmed to detect the presence of waste, automatically open the lid, and monitor the fill level in real time. The Robotic bin aims to promote hygienic practices by minimizing human contact, ther

APA, Harvard, Vancouver, ISO, and other styles

17

E.N., Ifeagwu, and Ejimofor Ihekeremma A.U. "A Smart, Cloud-Enabled Internet of Things System that Optimizes Home Energy Distribution, Safety, and Consumption." International Research Journal of Innovations in Engineering and Technology 08, no. 10 (2024): 147–54. http://dx.doi.org/10.47001/irjiet/2024.810020.

Full text

Abstract:

This paper focused ona smart, cloud-enabled internet of things system that optimizes home energy distribution, safety, and consumption. The materials used in this paper include Servo motor, lamp holder, energy bulbs, 13A socket, rectifier, jumper wires, electric cables, Blynk interface, motion sensor, temperature/humidity sensor, Esp32, and smoker sensor. The development of the system's code, which was essential for optimizing the system's operations, was carried out using the Arduino Integrated Development Environment. A testbed comprising of the designed work was done in house located in Ana

APA, Harvard, Vancouver, ISO, and other styles

18

KATARİA, Kanishka, J. CHANDANA, Athira RAGHUMADHAVAN, Komal GANDHİ, Kartik RAJA, and Shilpa GİTE. "Virtual Reality Skateboard Extending Metaverse." Journal of Metaverse 3, no. 2 (2023): 100–107. http://dx.doi.org/10.57019/jmv.1317562.

Full text

Abstract:

Implementing a virtual reality skateboard which would be further expanded into the Metaverse, a cyberspace where multiple people can come together and interact virtually. Further implementation of this VR experience into the Metaverse will be conceptualized in the research paper published along with the project. The motive behind the project was to let people experience certain activities which are hard to realize in the physical world. Our project consists of 2 parts, hardware, and software. The hardware consists of a skateboard, Arduino, VR headset, jumper wires, mini breadboard, an HC-06 Bl

APA, Harvard, Vancouver, ISO, and other styles

19

CHBAIK, NABIL, Azeddine KHIAT, Ayoub BAHNASSE, and Hassan OUAJJI. "Analyzing Smart Inventory Management System Performance Over Time with State-Based Markov Model and Reliability Approach, Enhanced by Blockchain Security and Transparency." Statistics, Optimization & Information Computing 13, no. 2 (2024): 508–30. https://doi.org/10.19139/soic-2310-5070-2127.

Full text

Abstract:

In response to the evolving demands of modern inventory management, this paper introduces a quantitative mathematical model aimed at assessing the performance of a smart inventory management system, emphasizing the integration of blockchain technology to enhance security and transparency. By considering essential hardware components, including ESP32 module, HC-SR04 ultrasonic sensor, battery, and jumper wires, the model utilizes Markov modeling and a reliability-based approach. Its primary objective is to enable timely repair and maintenance activities, ensuring sustained system availability b

APA, Harvard, Vancouver, ISO, and other styles

20

Syadida, Michelin Harosan, Ahmad Faqih, Gifthera Dwilestari, and Ade Rizki Rinaldi. "Performance Analysis and Implementation of A Real-Time Based Robotic System in Clean Water Filtration." Journal of Artificial Intelligence and Engineering Applications (JAIEA) 4, no. 3 (2025): 2169–77. https://doi.org/10.59934/jaiea.v4i3.1104.

Full text

Abstract:

The increasing crisis of clean water availability and pollution in urban drainage systems has become a pressing concern. This study aims to analyze the performance and optimize a real-time-based robotic system for clean water filtration in drainage channels. The proposed robotic system integrates smart sensors for automated waste detection and collection, and is operated remotely via the Internet of Things (IoT) platform. The methodology includes system testing under various drainage conditions, with an emphasis on evaluating waste processing capacity and identifying key performance-influencin

APA, Harvard, Vancouver, ISO, and other styles

21

Badamasi, Salihu, Azeez T. Oladimeji, and Ndubuka G. Ihebuzo. "Development of an IoT-Based Device for Monitoring Vital Signs in Ambulatory Patients." European Journal of Biology and Medical Science Research 12, no. 1 (2024): 41–62. http://dx.doi.org/10.37745/ejbmsr.2013/vol12n14162.

Full text

Abstract:

This work aimed to develop ambulatory vital signs monitoring devices using the Internet of Things (AVSMDIoT). This work involves the development of robust signal algorithms with an assemblage of components like Arduino Nano, a suitable length of Velcro, a laptop downloaded with Arduino, jumper wires, soldering lead, soldering tools, temperature sensor, heart rate sensor, ESP module 8266, Spo2 sensor and respiration sensor. Patients' real-time physiological vital signs, like heart rate, temperature, peripheral oxygen saturation, blood pressure, and respiration sensors, were measured and saved o

APA, Harvard, Vancouver, ISO, and other styles

22

Ashish, S. Gawali Rupali S. Kalokar Monali M. Jawanjal Tanushri S. Dharmik Gaurav H. Bakade Chinmayee S. Deotare Sushmit S. Gaikwad. "AI and IoT based Home Automation System." International Journal of Advanced Innovative Technology in Engineering 10, no. 2 (2025): 191–95. https://doi.org/10.5281/zenodo.15425539.

Full text

Abstract:

This paper aims to develop a smart home automation system that enables users to control electronic devices using hand gestures. By leveraging computer vision and deep learning techniques, a webcam captures hand gestures, which are processed using a Convolutional Neural Network (CNN) model for real-time classification. The recognized gestures are then transmitted to an ESP8266 microcontroller via Wi-Fi, triggering the corresponding on/off commands for connected IoT devices. This system enhances touchless interaction, offering an intuitive and accessible solution for smart home automation, parti

APA, Harvard, Vancouver, ISO, and other styles

23

Sheshalani Balasingam, Mohd Khuzaimi Zapiee, and Dharnishaa Mohana. "Smart Home Automation System Using IOT." International Journal of Recent Technology and Applied Science 4, no. 1 (2022): 44–53. http://dx.doi.org/10.36079/lamintang.ijortas-0401.332.

Full text

Abstract:

While the cost of living is going up, there is a growing focus to involve technology to lower those prices. With this in mind the Smart Home research allows the user to build and maintain a house that is smart enough to keep energy levels down while providing more automated applications. This concept can be suitably included to make our house smarter, saver, energy efficient and automated. This research focuses on building a save, automated system by using the internet connection that will smartly control the appliances like Lights, Fan, and other electrical appliances in our home. A smart hom

APA, Harvard, Vancouver, ISO, and other styles

24

Gális, Marek, Ladislav Naďo, Ervín Hapl, Ján Šmídt, Lucia Deutschová, and Jozef Chavko. "Comprehensive analysis of bird mortality along power distribution lines in Slovakia." Raptor Journal 13, no. 1 (2019): 1–25. http://dx.doi.org/10.2478/srj-2019-0006.

Full text

Abstract:

Abstract Collisions and electrocutions on power lines are known to kill large numbers of birds annually on a global scale. We conducted comprehensive research focused on bird mortality caused by 22 kV and 110 kV distribution power lines in 13 Special Protection Areas in Slovakia. In the period between December 2014 and February 2016, 6,235 km of power lines were inspected twice during two periods (12/2014–03/2015 and 04/2015–02/2016) of field survey. In addition an intensive study was conducted during the second field survey at one-month intervals on power lines identified as the most dangerou

APA, Harvard, Vancouver, ISO, and other styles

25

S. A, Akinwumi, Okeke J. C, Ayanbisi O. W, et al. "Design and Construction of a Density-Controlled Traffic Light System." WSEAS TRANSACTIONS ON CIRCUITS AND SYSTEMS 22 (December 31, 2023): 158–65. http://dx.doi.org/10.37394/23201.2023.22.18.

Full text

Abstract:

This work introduces the application of piezoelectric sensors on the road which intersects to form a T juncture, the application of the sensor aids in regulating the control of traffic density on each side of the road. Traffic congestion as of today is caused by the improper management of time and eventually leads to traffic delays. This was undoubtedly observed during early hours when a lot of civilians head out to their workstations and during closing hours in the evenings. The increasing population and economic activities in urban areas contribute to higher vehicle ownership and usage, lead

APA, Harvard, Vancouver, ISO, and other styles

26

Ntezicyimanikora, Gervais, and Nyesheja M. Enan. "Remote Control Home Security Monitoring." Journal of Information and Technology 5, no. 2 (2025): 1–22. https://doi.org/10.70619/vol5iss2pp1-22.

Full text

Abstract:

This research paper details the development and implementation of a Remote-Control Home Security Monitoring system designed to directly notify homeowners and detect living creatures entering their property. The primary objective is to provide timely information about intrusions, including capturing photographic or video evidence of the living entity, and offering the capability to deter entry using a camera-integrated speaker when necessary. This system aims to enhance home security by allowing remote monitoring of potential intrusions, providing peace of mind to homeowners when they are away.

APA, Harvard, Vancouver, ISO, and other styles

27

Yu, Ren Shan, Zhen Wei Yang, and Tao Jin. "Application Research on Lightning Rod for Shielding Failure Prevention Based on JG and ZGUT Type Tower." Applied Mechanics and Materials 291-294 (February 2013): 2139–42. http://dx.doi.org/10.4028/www.scientific.net/amm.291-294.2139.

Full text

Abstract:

After an analysis on the shielding failure trip of accidents of two kinds of tower type for JG and ZGUT in 220kA transmission line in Jiujiang,the main causes of shielding failure trip on the JG and ZGUT type tower which the protection angle of middle phase jumper of JG type tower and middle phase wire of ZGUT type tower are too large were summarized.The measures to prevent the JG and ZGUT type tower from shielding failure were proposed in which TH-lightning rod above cross arm of suspension point of the Jumper string of JG ype tower and the middle phase conductor of ZGUT type tower were reaso

APA, Harvard, Vancouver, ISO, and other styles

28

Ding, Xiaochuan, Yao Zhao, Ali Hassan, et al. "Femtosecond Laser Direct Writing of Optical Overpass." Micromachines 13, no. 7 (2022): 1158. http://dx.doi.org/10.3390/mi13071158.

Full text

Abstract:

With the rapid increase in information density, problems such as signal crosstalk and crossover restrict the further expansion of chip integration levels and packaging density. Based on this, a novel waveguide structure—photonic jumper wire—is proposed here to break through the technical restrictions in waveguide crossing and parallel line wrapping, which hinder the integration of photonic chips. Furthermore, we fabricated the optical overpass to realize a more complex on-chip optical cross-connection. Our method and structure promote a series of practical schemes for improving optical chip in

APA, Harvard, Vancouver, ISO, and other styles

29

Fobelets. "Knitted Coil for Inductive Plethysmography." Proceedings 32, no. 1 (2019): 2. http://dx.doi.org/10.3390/proceedings2019032002.

Full text

Abstract:

Knitting a thin insulated metal wire simultaneously with elastic yarn in the round creates a coil with a self-inductance close to a wound coil. This knit is flexible and can be stretched, allowing the diameter of the coil to change, resulting in a change of its self-inductance. It is found that rib stitch gives the highest inductance but stocking stitch gives the highest variation of self-inductance with changing diameter. The feasibility of using the knitted coil for inductive plethysmography is demonstrated by simulated breathing in a baby jumper with knitted coils.

APA, Harvard, Vancouver, ISO, and other styles

30

Purkayastha, Abhik, Mahamad Irfanulla Khan, and Nayeem Unnisa. "A Simplified Spring winder For Clinical Application." International Journal of Dentistry Research 6, no. 1 (2021): 24–26. http://dx.doi.org/10.31254/dentistry.2021.6107.

Full text

Abstract:

Introduction: The fabrication of coils using heavy gauge stainless steel wire for use in appliances such as the Churro Jumper can be a tedious task and can often result in spaced coils that lead to more flexibility than can be desired, leading to a decreased force application and hence overall lengthened treatment time. Using well placed, tightly adherent coils the force of which can be controlled by placement of the desired number of coils can help to mitigate this shortcoming. Technique: The spring winder described here is easy to fabricate using easily available stationary articles which ca

APA, Harvard, Vancouver, ISO, and other styles

31

Khan, B. Zorina. "Married Women's Property Laws and Female Commercial Activity: Evidence from United States Patent Records, 1790–1895." Journal of Economic History 56, no. 2 (1996): 356–88. http://dx.doi.org/10.1017/s002205070001648x.

Full text

Abstract:

Nineteenth-century laws granted wives previously withheld rights to their own property and earnings as well as liability for debts and contracts. I use 4,198 women's patents to assess whether these laws encouraged greater female commercial activity. Patentees were motivated by potential profits and were responsive to market incentives. Women's patenting jumped significantly in states with legal reforms and was lowest in states without such laws. Much of the subsequent increase occurred in metropolitan centers where property rights were of greater concern. Thus, by reducing transactions costs a

APA, Harvard, Vancouver, ISO, and other styles

32

Morishige, Hina, and Tetsuya Kato. "Triboelectric Series Using a Simple Charge Sign Checker." Physics Teacher 60, no. 8 (2022): 667–69. http://dx.doi.org/10.1119/5.0048094.

Full text

Abstract:

Prompt determination of the positive or negative signs of charged objects promotes students’ understanding of electrostatics and motivates them to learn more about this field of physics. We developed a low-cost (about US$5) and easy-to-use device for checking the signs of the static charges in objects. It consists of two easy-to-build circuits, one for positive- and another for negative-charge detection. Both are composed of a metal–oxide–semiconductor field-effect transistor (MOSFET), an LED indicator, a tactile switch (momentary contact switch), and a jumper wire. In this paper, we provide i

APA, Harvard, Vancouver, ISO, and other styles

33

Gao, Kai, Bo Lu, Rong Xiao, Zhoufei Yao, Kaili Zhang, and Mengge Wang. "An ultra low-power galloping monitoring sensor based on acceleration measuring unit." Journal of Physics: Conference Series 2935, no. 1 (2025): 012029. https://doi.org/10.1088/1742-6596/2935/1/012029.

Full text

Abstract:

Abstract The galloping of transmission lines is a phenomenon that transmission lines vibrate and wobble due to the influence of weather, power load, wire distortion and other factors in the process of power transmission. This phenomenon will lead to the tripping of the transmission line, and the damage to tower crossarms, jumpers, and insulators, which will pose a great threat to line operation. In order to detect this phenomenon as early as possible, an ultra low-power sensor based on the acceleration measuring unit (AMU) is designed to monitor the conductor galloping phenomenon on the transm

APA, Harvard, Vancouver, ISO, and other styles

34

S., H. Chaflekar, Wadlyakar Chirag, Gomkar Ankita, Ikhar Tejas, Dhore Prajakta, and Hole Prachiti. "Smart Facial Recognition Attendance System Using ESP32 Cam." Smart Facial Recognition Attendance System Using ESP32 Cam 8, no. 10 (2023): 3. https://doi.org/10.5281/zenodo.10070869.

Full text

Abstract:

The human face holds significant importance as it is a unique identifier for each individual. Facial characteristics are used in face recognition systems. Keeping track of attendance poses a considerable challenge in educational institutions. Face recognition is a method that checks if a person's face in an image matches any faces stored in a database. The main aim of this project is to create an intelligent attendance system using an ESP32 Cam for students in an educational institution. The goal is to enhance the current attendance system's efficiency and effectiveness. To achieve this, we ut

APA, Harvard, Vancouver, ISO, and other styles

35

Nguyen, Van Tai, and Vladimir Yu Kirillov. "Crosstalk in Electrical Wire Bundles with Shield Heterogeneities Nguyen Van Tai, V.Yu. Kirillov." Vestnik MEI 6, no. 6 (2020): 76–81. http://dx.doi.org/10.24160/1993-6982-2020-6-76-81.

Full text

Abstract:

The results from an experimental study of crosstalk interference between twisted pairs of conductors of an electrical wire bundle model are presented. The aim of the study is to determine the crosstalk interference levels in a shielded twisted pair of conductors when there is heterogeneity in the form of a gap between the shield of bundle conductors and the electrical connector body. The studies were carried out on the electrical wire bundle mockup consisting of shielded and unshielded twisted pairs of conductors. The unshielded twisted pair of conductors was used as a source of crosstalk inte

APA, Harvard, Vancouver, ISO, and other styles

36

Talukdar, Akash, Sayan Paul, Atri Bhattacharya, Parna Banerjee, Shirsendu Banerjee, and Swagata Bhattacharaya. "Smart Automated Dustbin." International Journal for Research in Applied Science and Engineering Technology 11, no. 5 (2023): 7331–34. http://dx.doi.org/10.22214/ijraset.2023.53520.

Full text

Abstract:

Abstract: The project's major goal is to create a smart trash can that would aid in maintaining a clean and environmentally friendly environment. Since technology is becoming increasingly intelligent, we are utilizing Arduino to develop a smart dustbin that will help clean the environment. This intelligent trash can management system is based on a microcontroller and has ultrasonic sensors on the trash can. If trash bins are not maintained, they might lead to pollution that is bad for our health and create an unhealthful atmosphere. In the suggested technique, a smart trash can made of an Ardu

APA, Harvard, Vancouver, ISO, and other styles

37

Christensen, Karen. "Thanks for Typing." Logos 30, no. 2 (2019): 12–18. http://dx.doi.org/10.1163/18784712-03002003.

Full text

Abstract:

In this paper, I review the Thanks for Typing conference held at Oxford University in March 2019, which explored the experiences of women who worked as literary helpmeets for famous men. I also give some details from the papers presented there. In my paper ‘“Jumped-up Typists”: Two secretaries who became guardians of the flame’, I discussed how two literary wives, Sophia Mumford (1899–1997), wife of the American historian and philosopher Lewis Mumford, and Valerie Eliot (1926–2012), second wife of T. S. Eliot, found their identities in supporting, and later defending, their husbands’ work. I a

APA, Harvard, Vancouver, ISO, and other styles

38

Dewi, Ni Kadek Jhiestany Nirmala. "Nasi goreng: food and wine pairing." Jurnal Ilmiah Pariwisata dan Bisnis 1, no. 5 (2022): 1189–204. http://dx.doi.org/10.22334/paris.v1i5.83.

Full text

Abstract:

Kuliner Indonesia memiliki potensi yang besar untuk dikemangkan menjadi destinasi wisata bagi para wisatawan mancanegara maupun lokal. Salah satunya adalah nasi goreng, yang merupakan makanan terenak kedua di dunia. Minum wine saat ini tengah menjadi tren, salah satu wine lokal yang di produksi di Bali yaitu Hatten Wines. Untuk itu dilakukan penelitian yang bertujuan mengetahui Hatten Wines apa yang cocok dipairing bersama nasi goreng. Penelitian ini menggunakan data kualitatif, dengan teknik pengumpulan data melalui observasi, dokumentasi, wawancara. Adapun sumber data primernya adalah 2 info

APA, Harvard, Vancouver, ISO, and other styles

39

Fauziyah, Nur Laily. "Supervisi Pendidikan Perspektif Hadis Nabi Dan Pengembangannya Dalam Meningkatkan Jualitas Profesionalisme Guru." Almarhalah | Jurnal Pendidikan Islam 3, no. 1 (2020): 39–50. http://dx.doi.org/10.38153/alm.v3i1.31.

Full text

Abstract:

Dalam Al-Qur’an maupun dalam Hadist-hadist banyak kita jumpai istilah-istilah yang berkaitan dengan kepemimpinan di antaranya : Amir, Khalifah, Imamah dsb. ini berarti Islam telah lebih dahulu mengetahui dan menetapkan mengani asas-asas kepemimpinan jauh sebelum para ahli Barat membahasnya. Namun, berbagai teori yang digambarkan para ahli mengenai kepemimpinan tak jarang membuat orang tidak memahami akan arti sebenarnya tentang kepemimpinan dalam Islam. Sehingga hampir kebanyakan pemimpin saat ini, telah lari dari arti kepemimpinan dalam ajaran Islam.Supervisi merupakan suatu teknis pelayanan

APA, Harvard, Vancouver, ISO, and other styles

40

Fauziyah, Nur Laily. "Supervisi Pendidikan Perspektif Hadis Nabi Dan Pengembangannya Dalam Meningkatkan Jualitas Profesionalisme Guru." Almarhalah 3, no. 1 (2020): 39–50. http://dx.doi.org/10.38153/almarhalah.v3i1.31.

Full text

Abstract:

Dalam Al-Qurâ€™an maupun dalam Hadist-hadist banyak kita jumpai istilah-istilah yang berkaitan dengan kepemimpinan di antaranya : Amir, Khalifah, Imamah dsb. ini berarti Islam telah lebih dahulu mengetahui dan menetapkan mengani asas-asas kepemimpinan jauh sebelum para ahli Barat membahasnya. Namun, berbagai teori yang digambarkan para ahli mengenai kepemimpinan tak jarang membuat orang tidak memahami akan arti sebenarnya tentang kepemimpinan dalam Islam. Sehingga hampir kebanyakan pemimpin saat ini,Â telah lari dari arti kepemimpinan dalam ajaran Islam.Supervisi merupakan suatu teknis pelayan

APA, Harvard, Vancouver, ISO, and other styles

41

Yusmita, Yusmita. "Dinamika Pencatatan Pernikahan Di Indonesia dalam Kajian Maslahah Mursalah." Berasan: Journal of Islamic Civil Law 2, no. 1 (2023): 33. http://dx.doi.org/10.29240/berasan.v2i1.7218.

Full text

Abstract:

The purpose of this study is to answer how the application of mashlahah mursalah in marriage registration in Indonesia. The method in this study is a library method by reading books or magazines with other data sources in the library. In an axiological review, marriage registration is carried out to establish marriage order in society. It attempts to protect the dignity and sanctity of marriage, and more specifically women in domestic life. Through marriage registration as evidenced by a marriage certificate, each husband and wife get a copy. If in the future there are disputes and disputes be

APA, Harvard, Vancouver, ISO, and other styles

42

Basharkin, Maksim. "Dependence of rail potential on the resistance of the traction substation grounding device and rail line parameters." Bulletin of scientific research results 2024, no. 3 (2024): 24–33. http://dx.doi.org/10.20295/2223-9987-2024-03-24-33.

Full text

Abstract:

Purpose: to analyse the dependence of the potential on rails on the track coordinate at different values of conductivity of the grounding device of the traction substation (g0 = 0 S, 10 S, 25 S, 50 S). Methods: the analysis was carried out on the developed substitution diagram of the traction rail network section using the method of nodal potentials. The calculation was implemented in Mathcad 15 mathematical package. Selection of initial data was carried out taking into account the values established in the current normative documentation. Results: an equivalent substitution scheme of the trac

APA, Harvard, Vancouver, ISO, and other styles

43

Bokov, Victor, and Oleh Sisa. "Drawing Cylindrical Parts From Non-Continuous." National Interagency Scientific and Technical Collection of Works. Design, Production and Exploitation of Agricultural Machines, no. 51 (2021): 147–68. http://dx.doi.org/10.32515/2414-3820.2021.51.147-168.

Full text

Abstract:

A new method for drawing cylindrical parts from a flat metal mesh netting with square openings has been proposed, developed and investigated. According to this method, drawing is carried out from a square workpiece, whose sides are parallel to the diagonals of the netting mesh. A new method of drawing parts with flange clamping of a sheet workpiece has been proposed and experimentally tested, which differs in that the workpiece is pre-perforated; perforation of the workpiece is performed only in the flange area, whose inner diameter is equal to the average diameter dc of the cylindrical part o

APA, Harvard, Vancouver, ISO, and other styles

44

Windle, Alan. "Andrew Keller. 22 August 1925 – 7 February 1999." Biographical Memoirs of Fellows of the Royal Society 47 (January 2001): 293–310. http://dx.doi.org/10.1098/rsbm.2001.0017.

Full text

Abstract:

Born in Budapest in 1925, Andrs Keller was the only child of Jewish parents. He entered the University of Budapest in 1943 on a Jewish quota to study natural philosophy. Studies became increasingly difficult because of the activity of fascists in the university as Hungary was an ally of Nazi Germany and was expected to be seen to pursue an anti–Semitic policy. Perhaps inevitably, he had to join a Jewish labour battalion, which is where Jewish men of military service age were sent instead of into the armed forces. After several days at a drafting centre in a Budapest brickworks, he was taken ea

APA, Harvard, Vancouver, ISO, and other styles

45

Dr. Annu Sharma and Mr Dhanush H K. "IoT-Based Underground Pipe Damage and Leakage Detection." International Journal of Advanced Research in Science, Communication and Technology, June 28, 2024, 97–100. http://dx.doi.org/10.48175/ijarsct-19018.

Full text

Abstract:

This paper presents a novel concept for detecting damage and leaks in underground pipes utilizing IoT technology. Utilizing piezoelectric sensors to detect pressure fluctuations and structural damage, alongside moisture sensors to identify leaks, and gas sensors to pinpoint gas leaks, our system ensures thorough monitoring of subterranean infrastructure. Integration of these sensors with an Arduino micro controller enables real-time data collection and analysis. Through the use of jumper wires, seamless connectivity between sensors and the Arduino board is established. In the event of an anoma

APA, Harvard, Vancouver, ISO, and other styles

46

Sonawane, R. N., A. S. Ghule, A. P. Bowlekar, and A. H. Zakane. "Design and Development of Temperature and Humidity Monitoring System." Agricultural Science Digest - A Research Journal, of (August 26, 2019). http://dx.doi.org/10.18805/ag.d-4893.

Full text

Abstract:

The temperature and humidity monitoring system was developed using various components viz., Arduino Uno, DHT11 sensor, universal serial bus (USB) type B cable, adaptor, DC power jack, 9-V battery connector, 9-V DC battery, resistor, liquid-crystal display (LCD) screen, trimmer potentiometer, light-emitting diode (LED) bulbs, jumper wires, micro secure digital (SD) card module, printed circuit board (PCB), etc. The field testing of the developed temperature and humidity monitoring system was carried out at various locations of the college campus. It was observed that the system worked between t

APA, Harvard, Vancouver, ISO, and other styles

47

Journal, IJSREM. "Robotic Arm Control Using Arduino." INTERANTIONAL JOURNAL OF SCIENTIFIC RESEARCH IN ENGINEERING AND MANAGEMENT 06, no. 12 (2022). http://dx.doi.org/10.55041/ijsrem17203.

Full text

Abstract:

Today technology is developing in the same direction in line with rapidly increasing human needs. The work done to meet these needs makes life easier every day, and these studies are concentrated in robotic arm studies. Robot arm works with an outside user or by performing predetermined commands. Nowadays, the most developed field of robot arms in every field is the industry and medicine sector. Designed and realized in the project, the robot arm has the ability to move in 3 axis direction with 4 servomotors. Thanks to the holder, you can take the desired material from one place and carry it t

APA, Harvard, Vancouver, ISO, and other styles

48

Baviskar, Yash. "Mobile Bluetooth Control Car." INTERANTIONAL JOURNAL OF SCIENTIFIC RESEARCH IN ENGINEERING AND MANAGEMENT 06, no. 12 (2022). http://dx.doi.org/10.55041/ijsrem17118.

Full text

Abstract:

This car Work is based on Arduino, a motor driver, and a Bluetooth module, and it is based on the combination of hardware and software. Arduino uses an ATmega328 microcontroller. This is a very simple and easy type form of remote control car, instructions are given to Arduino for various actions through an interface via Bluetooth module. Also, we have used 4 TT gear motors and wheels plus the 12v battery we used. The project aims to develop a car to entertain kids that can be controlled through a smartphone app. Making the best use of the app facilitates the user to control the toy car which a

APA, Harvard, Vancouver, ISO, and other styles

49

Shixuemei and Mideth Abisado. "Diagnostic Segmentation Based on Kidney Medical Image." Journal of Artificial Intelligence and Technology, June 6, 2023. http://dx.doi.org/10.37965/jait.2023.0214.

Full text

Abstract:

Lesion segmentation of medical images is an important component of smart medicine. The development of deep learning technology is followed by rapid advancement in lesion segmentation technology of medical images. Though the present segmentation technology can retain spatial features, insufficient spatial features are retained with low segmentation accuracy. Our proposed PST-UNet model combines transformer with U-shaped structure and better infuses encoder's multi-scale features by using convolution fusion module. PST-UNet model adopts two types of block Swin transform at encoder and decoder en

APA, Harvard, Vancouver, ISO, and other styles

50

S, Rakshith, Syed Hassan Quadri, and S. K. Harisha. "Smart Occupancy Lighting System." International Journal of Innovative Science and Research Technology (IJISRT), May 30, 2024, 1180–83. http://dx.doi.org/10.38124/ijisrt/ijisrt24may1802.

Full text

Abstract:

This project introduces a sophisticated system designed to streamline lighting management in seminar halls, effectively addressing the diverse needs of both stage activities and audience engagement. Leveraging the Arduino Uno R3 microcontroller, alongside infrared (IR) sensors, a toggle switch, jumper wires, and an LED display, this system offers a comprehensive solution for dynamically adjusting lighting levels based on real-time occupancy data. By integrating sensor technology at strategic entry and exit points within the seminar hall, the system accurately detects the flow of attendees, ena

APA, Harvard, Vancouver, ISO, and other styles

We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!