Relevant bibliographies by topics / Limiting cycle

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Books
  4. Book chapters
  5. Conference papers
  6. Reports

Academic literature on the topic 'Limiting cycle'

Author: Grafiati
Published: 28 May 2022
Last updated: 30 July 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Limiting cycle.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Limiting cycle"

1

Fisher, A. J. "Loran-C cycle identification in hard-limiting receivers." IEEE Transactions on Aerospace and Electronic Systems 36, no. 1 (2000): 290–97. http://dx.doi.org/10.1109/7.826332.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Vasseur, E., P. Navidi, and S. Hariri. "Direct determination of limiting cycle during cyclic loading." Computational Materials Science 7, no. 1-2 (1996): 11–15. http://dx.doi.org/10.1016/s0927-0256(96)00053-5.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Molokov, K. A., Valery V. Novikov, Ya R. Domashevskaya, and A. I. Mamontov. "Engineering Method for Calculating the Limiting Amplitudes of Stress Cycles for Structural Steels." Materials Science Forum 1084 (April 13, 2023): 117–22. http://dx.doi.org/10.4028/p-rm063t.

Full text
Abstract:
In large-sized metal structures, various stress concentrators are often present, which affects the operation of the material. These are intermittent bonds, holes, welded joints, material defects, etc. As a result of overloads under the action of an external cyclic load on structures in the area of stress raisers, the cycle asymmetry, the level of maximum stresses and deformations increase. In this case, the determination of the limit values of the stress cycles can be performed using a diagram of the limit stress amplitudes. The paper presents an engineering method for calculating the limiting
APA, Harvard, Vancouver, ISO, and other styles
4

Fu, Jiawei, Zhenhua Liu, Xingyang Yang, Sumin Jin, and Jilei Ye. "Limiting Performance of the Ejector Refrigeration Cycle with Pure Working Fluids." Entropy 25, no. 2 (2023): 223. http://dx.doi.org/10.3390/e25020223.

Full text
Abstract:
An ejector refrigeration system is a promising heat-driven refrigeration technology for energy consumption. The ideal cycle of an ejector refrigeration cycle (ERC) is a compound cycle with an inverse Carnot cycle driven by a Carnot cycle. The coefficient of performance (COP) of this ideal cycle represents the theoretical upper bound of ERC, and it does not contain any information about the properties of working fluids, which is a key cause of the large energy efficiency gap between the actual cycle and the ideal cycle. In this paper, the limiting COP and thermodynamics perfection of subcritica
APA, Harvard, Vancouver, ISO, and other styles
5

Degtyarev, V. A. "Prediction of limiting amplitudes of cycle stresses of welded joints with steady residual stresses." Paton Welding Journal 2016, no. 10 (2016): 14–19. http://dx.doi.org/10.15407/tpwj2016.10.03.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Klik, Ivo, and Ching-Ray Chang. "Approach to a Limiting Cycle in Thermally Relaxing Media." SPIN 05, no. 01 (2015): 1550001. http://dx.doi.org/10.1142/s2010324715500010.

Full text
Abstract:
The thermally activated dynamics of an uniaxial superparamagnetic particle are studied here from the point of view of approach towards a steady state minor hysteresis loop representing a limiting cycle. The particle is initially at an arbitrary state, and is driven by a sufficiently small external applied ac magnetic field till the limiting minor hysteresis loop is reached with a desired precision. The number of periods required to reach the limiting cycle is found to satisfy an Arrhenius-type law, with an exponential dependence on the inverse ambient temperature. We tentatively associate this
APA, Harvard, Vancouver, ISO, and other styles
7

Tsou, Meng-Fu Bryan, and Tim Stearns. "Mechanism limiting centrosome duplication to once per cell cycle." Nature 442, no. 7105 (2006): 947–51. http://dx.doi.org/10.1038/nature04985.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Jordinson, C., and D. O. Gough. "The Effect of the Solar Cycle on the Resonant Coupling of g Modes." International Astronomical Union Colloquium 176 (2000): 390. http://dx.doi.org/10.1017/s0252921100058164.

Full text
Abstract:
AbstractWe consider the effect of the solar cycle on g-mode parametric resonance, and hence on the limiting amplitude of the overstable solar g1(ℓ = 1) mode. We find no change in the expected limiting amplitude from that found by Dziembowski (1983), who ignored cycle variations.
APA, Harvard, Vancouver, ISO, and other styles
9

Kim, Jin-Seok, Sung-Hun Lim, and Jae-Chul Kim. "Comparative Analysis on Current Limiting Characteristics of Hybrid Superconducting Fault Current Limiters (SFCLs) with First Half Cycle Limiting and Non-Limiting Operations." Journal of Electrical Engineering and Technology 7, no. 5 (2012): 659–63. http://dx.doi.org/10.5370/jeet.2012.7.5.659.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Lehnert, Nicolai, Bradley W. Musselman, and Lance C. Seefeldt. "Grand challenges in the nitrogen cycle." Chemical Society Reviews 50, no. 6 (2021): 3640–46. http://dx.doi.org/10.1039/d0cs00923g.

Full text
Abstract:
In this Viewpoint, we address limitations within our current understanding of the complex chemistry of the enzymes in the Nitrogen Cycle. Understanding of these chemical processes plays a key role in limiting anthropogenic effects on our environment.
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Limiting cycle"

1

Burton, Christine. "Here to stay : the role of value creation, capture and exchange in limiting the liability of newness for new entrant museums." University of Technology, Sydney. School of Leisure Sport and Tourism, 2006. http://hdl.handle.net/2100/422.

Full text
Abstract:
This thesis examines the concepts of value creation, capture and exchange in limiting the liability of newness for nonprofit museums entering the sector. There has been considerable examination of cultural value in relation to museums. However, little is known about how value is created, captured and exchanged for stakeholders in new museums. It is posited that value creation, capture and exchange constitute a value cycle. Through this value cycle management in new museums detects and limits the liability of newness. The ability to detect and limit the liability of newness enables the continua
APA, Harvard, Vancouver, ISO, and other styles
2

Коломієць, Світлана Володимирівна, Светлана Владимировна Коломиец та Svitlana Volodymyrivna Kolomiiets. "Дослідження біфуркації в напівкласичних моделях твердотільних лазерів". Thesis, Київський національний університет ім. Тараса Шевченка, 2003. http://essuir.sumdu.edu.ua/handle/123456789/62581.

Full text
Abstract:
Динаміка напівкласичної моделі твердотільного лазера вивчається методом біфуркації ініціації циклу та отримані критерії стійкості граничних циклів, що відбуваються внаслідок біфуркації Хопфа, інтервали стійкості для параметр накачки, коли стаціонарний розчин розглядається як додатковий параметр. Метод Джозефа використовується для інтеграції системи чотирьох диференціальних рівнянь, які асимптотично описують динаміку лазерної моделі. За допомогою скорочення чотиривимірні завдання до двовимірного, ми знаходимо періодичне рішення системи диференціальних рівнянь.
APA, Harvard, Vancouver, ISO, and other styles
3

Коломієць, Світлана Володимирівна, Светлана Владимировна Коломиец, Svitlana Volodymyrivna Kolomiiets, Ірина Олександрівна Шуда, Ирина Александровна Шуда та Iryna Oleksandrivna Shuda. "Асимптотичні методи інтегрування нелінійних рівнянь динамічних систем". Thesis, НПУ ім. М.П. Драгоманова, 2002. http://essuir.sumdu.edu.ua/handle/123456789/62092.

Full text
Abstract:
Розкривається застосування асимптотичних методів інтегрування нелінійних рівнянь динамічних систем.<br>The application of asymptotic methods for the integration of nonlinear equations of dynamical systems is revealed.
APA, Harvard, Vancouver, ISO, and other styles
4

Hoch, Thierry. "Modélisation du cycle biogéochimique des éléments limitant la production biologique en Manche (N, P, SI)." Paris 7, 1995. http://www.theses.fr/1995PA077121.

Full text
Abstract:
Ce travail presente un modele du cycle du phytoplancton en manche, a travers l'etude des cycles de l'azote, du phosphore et du silicium. Ces elements ont ete choisis car ils limitent potentiellement la production primaire dans cette zone. Le modele final est issu d'un couplage entre un modele physique et un modele biologique, qui represente ces elements sous les formes inorganique dissoute, phytoplanctonique, detritique et organique benthique. Le modele physique horizontal initial est issu d'un schema en boites, auquel a ete couple un modele vertical bicouche thermo-halin. Une simulation a l'a
APA, Harvard, Vancouver, ISO, and other styles

Books on the topic "Limiting cycle"

1

Leonovich, Sergey, Evgeniy Shalyy, Elena Polonina, Elena Sadovskaya, Lev Kim, and Valentin Dorkin. Durability of port reinforced concrete structures (Far East and Sakhalin). INFRA-M Academic Publishing LLC., 2021. http://dx.doi.org/10.12737/1816638.

Full text
Abstract:
Section I of the monograph is devoted to an urgent problem - forecasting the durability of port reinforced concrete structures, the destruction of which is associated with corrosion of steel reinforcement caused by chloride aggression and carbonation of concrete. The analysis of models for calculating the service life of structures and experimental data is carried out, the life cycles for the main degradation processes in concrete and reinforcement, the periods of initiation and propagation of corrosion are considered, the influence of environmental factors (temperature, humidity) and the qual
APA, Harvard, Vancouver, ISO, and other styles
2

Fitzgerald, Jacob. Lifestyle Mastery Personal Power: Eliminate Negative Emotions, Break the Cycle of Limiting Beliefs, and Reclaim Your Life! Independently Published, 2019.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
3

Segal, David. Energy Supplies for the 21st Century. Oxford University Press, 2017. http://dx.doi.org/10.1093/oso/9780198804079.003.0007.

Full text
Abstract:
Chapter 7 describes energy sources in particular clean energy based on renewable sources. The importance of renewable energy in limiting global warming is discussed. Solar cells, hydroelectric power, wind energy, tidal energy and geothermal energy are covered. The nuclear fuel cycle for thermal reactors is explained. Decarbonisation of industrial processes including sequestration of carbon dioxide are described, as are lithium-ion batteries and fuel cells.
APA, Harvard, Vancouver, ISO, and other styles
4

Kirchman, David L. Processes in Microbial Ecology. Oxford University Press, 2018. http://dx.doi.org/10.1093/oso/9780198789406.001.0001.

Full text
Abstract:
Processes in Microbial Ecology discusses the major processes carried out by viruses, bacteria, fungi, protozoa, and other protists—the microbes—in freshwater, marine, and terrestrial ecosystems. The book shows how advances in genomic and other molecular approaches have uncovered the incredible diversity of microbes in natural environments and unraveled complex biogeochemical processes carried out by uncultivated bacteria, archaea, and fungi. The microbes and biogeochemical processes are affected by ecological interactions, including competition for limiting nutrients, viral lysis, and predatio
APA, Harvard, Vancouver, ISO, and other styles
5

Jappelli, Tullio, and Luigi Pistaferri. Intertemporal Choice Under Certainty. Oxford University Press, 2017. http://dx.doi.org/10.1093/acprof:oso/9780199383146.003.0001.

Full text
Abstract:
This chapter introduces the basic intertemporal problem faced by a consumer who has to choose between consumption and saving when future incomes and interest rates are known with certainty. First we consider a model with only two periods and a fixed demographic structure; next we extend the analysis to a more realistic multi-period, finite-horizon model in which family composition changes over the life cycle; and finally we present the continuous-time version of the model and introduce the limiting case in which individuals have an infinite horizon. With appropriate assumptions about the indiv
APA, Harvard, Vancouver, ISO, and other styles
6

Muders, Thomas, and Christian Putensen. Pressure-controlled mechanical ventilation. Oxford University Press, 2016. http://dx.doi.org/10.1093/med/9780199600830.003.0096.

Full text
Abstract:
Beside reduction in tidal volume limiting peak airway pressure minimizes the risk for ventilator-associated-lung-injury in patients with acute respiratory distress syndrome. Pressure-controlled, time-cycled ventilation (PCV) enables the physician to keep airway pressures under strict limits by presetting inspiratory and expiratory pressures, and cycle times. PCV results in a square-waved airway pressure and a decelerating inspiratory gas flow holding the alveoli inflated for the preset time. Preset pressures and cycle times, and respiratory system mechanics affect alveolar and intrinsic positi
APA, Harvard, Vancouver, ISO, and other styles
7

Fassihi, Mohammad Reza, and Anthony R. Kovscek. Low-Energy Processes for Unconventional Oil Recovery. Society of Petroleum Engineers, 2017. http://dx.doi.org/10.2118/9781613994757.

Full text
Abstract:
Low-Energy Processes for Unconventional Oil Recovery fills a gap in oil and gas literature. Today, in our globalized society, the oil industry has to demonstrate how oil recovery can be done responsibly over the life-cycle of the project, clearly articulating energy efficiency as well as limiting CO2 and environmental footprints of the chosen recovery processes. The authors bring together their complementing expertise to provide the reader with an in-depth discussion of a range of alternative recovery techniques. Most recovery methods included are focused on heavy oil recovery, but some have a
APA, Harvard, Vancouver, ISO, and other styles
8

Bekker, Sonja. Can European Socioeconomic Governance Be Social Investment Proof? Oxford University Press, 2017. http://dx.doi.org/10.1093/oso/9780198790488.003.0028.

Full text
Abstract:
This chapter argues that EU socioeconomic coordination can support social investment. Both the Lisbon Treaty’s main norms and goals and the European Semester’s short-term goals are in line with social investment. This chapter closely scrutinizes the country-specific recommendations (CSRs) stemming from the Stability and Growth Pact (SGP). Whereas this coordination cycle has been criticized for having a one-sided focus on limiting public expenditure, even the SGP at times results in recommendations that encourage social investment. Such recommendations only address a limited number of policies
APA, Harvard, Vancouver, ISO, and other styles
9

Edgeworth, Jonathan. Antibiotic resistance in the ICU. Oxford University Press, 2016. http://dx.doi.org/10.1093/med/9780199600830.003.0289.

Full text
Abstract:
The two objectives of ensuring early appropriate antimicrobial treatment for septic patients on the intensive care unit (ICU), and limiting emergence and spread of antimicrobial resistance are both complicated and potentially conflicting. Increasingly unpredictable resistance, particularly amongst Gram-negative bacteria, through both local selection and transmission, and importation of globally successful resistant clones encourages the use of broad-spectrum empiric antimicrobials for septic patients, including in combination. This may lead to a vicious cycle whereby increasing antibiotic use
APA, Harvard, Vancouver, ISO, and other styles
10

Johnson, Steven B. Pathophysiology and management of abdominal injury. Oxford University Press, 2016. http://dx.doi.org/10.1093/med/9780199600830.003.0334.

Full text
Abstract:
Abdominal injuries are common following blunt and penetrating trauma. They can result in a spectrum of severity from benign to potentially life-threatening conditions. Soon after injury, haemorrhage is the predominant concern, and leading cause of morbidity and mortality. Active haemorrhage resulting in shock requires emergent operative intervention and aggressive haemostatic resuscitation. However haemodynamically-stable patients benefit from non-operative management of solid organ injuries with or without angiographic embolization. Sepsis usually occurs as a result of intra-abdominal infecti
APA, Harvard, Vancouver, ISO, and other styles

Book chapters on the topic "Limiting cycle"

1

Mol, L., and A. J. Termorshuizen. "Life cycle and ecology of Verticillium dahliae in potato." In Potato Ecology And modelling of crops under conditions limiting growth. Springer Netherlands, 1995. http://dx.doi.org/10.1007/978-94-011-0051-9_16.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Hui, Li, Faress Hraib, Miguel Vicente, and Riyadh Hindi. "Field evaluation of pipe-tie system in limiting the girder rotation during bridge deck construction." In Bridge Safety, Maintenance, Management, Life-Cycle, Resilience and Sustainability. CRC Press, 2022. http://dx.doi.org/10.1201/9781003322641-284.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Lawrence, Kathy S. "Reniform nematode (Rotylenchulus reniformis) and its interactions with cotton (Gossypium hirsutum)." In Integrated nematode management: state-of-the-art and visions for the future. CABI, 2021. http://dx.doi.org/10.1079/9781789247541.0014.

Full text
Abstract:
Abstract The reniform nematode, Rotylenchulus reniformis, is a major economic factor limiting cotton (Gossypium hirsutum) production in the USA. Across the United States cotton belt, 0.1-5.0% of the cotton crop is lost to the reniform nematode (RN) annually. This chapter discusses the economic importance, geographical distribution, host range, damage symptoms, biology and life cycle, interactions with other nematodes and pathogens, recommended integrated management, and management optimization of the reniform nematode (R. reniformis). Future research requirements are also mentioned.
APA, Harvard, Vancouver, ISO, and other styles
4

Gifford, R. M. "Interaction of Carbon Dioxide with Growth-Limiting Environmental Factors in Vegetation Productivity: Implications for the Global Carbon Cycle." In Advances in Bioclimatology. Springer Berlin Heidelberg, 1992. http://dx.doi.org/10.1007/978-3-642-58136-6_2.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Voigt, Kai-Ingo, Lothar Czaja, and Oliver Zipse. "Transforming Value Chains for Sustainability." In Road to Net Zero. Springer International Publishing, 2023. http://dx.doi.org/10.1007/978-3-031-42224-9_6.

Full text
Abstract:
AbstractAchieving the Paris goal of limiting global warming to well below 2 °C requires radical decarbonization of our economy, including a shift to renewable energy. In the automotive sector, electromobility offers a promising option for making this transition. However, while electric vehicles (EVs) have lower emissions during their use phase, a significant part of the carbon footprint is shifted upstream in the value chain to raw material extraction and battery production. Against this background, this chapter provides an in-depth look at how the automotive industry’s transition to electromo
APA, Harvard, Vancouver, ISO, and other styles
6

Beyers, Robert J., and Howard T. Odum. "Chemical Cycles and Limiting Factors." In Springer Advanced Texts in Life Sciences. Springer New York, 1993. http://dx.doi.org/10.1007/978-1-4613-9344-3_4.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Hötte, Felix, Oliver Günther, Christoph von Sethe, Matthias Haupt, Peter Scholz, and Michael Rohdenburg. "Lifetime Experiments of Regeneratively Cooled Rocket Combustion Chambers and PIV Measurements in a High Aspect Ratio Cooling Duct." In Notes on Numerical Fluid Mechanics and Multidisciplinary Design. Springer International Publishing, 2020. http://dx.doi.org/10.1007/978-3-030-53847-7_18.

Full text
Abstract:
Abstract This paper aims at experimental investigations of the life limiting mechanisms of regeneratively cooled rocket combustion chambers, especially the so called doghouse effect. In this paper the set up of a cyclic thermo-mechanical fatigue experiment and its results are shown. This experiment has an actively cooled fatigue specimen that is mounted downstream of a subscale GOX-GCH$$_{\text {4}}$$ combustion chamber with rectangular cross section. The specimen is loaded cyclically and inspected after each cycle. The effects of roughness, the use of thermal barrier coatings, the length of t
APA, Harvard, Vancouver, ISO, and other styles
8

Nkurunziza, Radisras, Joanna Jankowicz-Cieslak, Stefaan P. O. Werbrouck, and Ivan L. W. Ingelbrecht. "Use of Open-Source Tools for Imaging and Recording Phenotypic Traits of a Coffee (Coffea arabica L.) Mutant Population." In Mutation Breeding in Coffee with Special Reference to Leaf Rust. Springer Berlin Heidelberg, 2023. http://dx.doi.org/10.1007/978-3-662-67273-0_14.

Full text
Abstract:
AbstractMutation breeding in Coffea arabica offers a powerful tool to induce novel genetic variability for breeding and genetic studies. The success of a mutation breeding program depends largely on the ability to screen large populations for target traits. There is also a need to accurately record induced mutant traits at the individual plant level. Comprehensive phenotyping requires measuring and tracking traits of interest during the crop growth cycle and subsequent generations. Therefore, efficient and accurate data collection and recording of traits is essential, both at the individual pl
APA, Harvard, Vancouver, ISO, and other styles
9

Lemmerz, Kai, and Bernd Kuhlenötter. "Human Body Simulation Within a Hybrid Operating Method for a Safe and Efficient Human-Robot Collaboration." In Annals of Scientific Society for Assembly, Handling and Industrial Robotics 2021. Springer International Publishing, 2022. http://dx.doi.org/10.1007/978-3-030-74032-0_16.

Full text
Abstract:
AbstractThe planning and integration of production systems with a direct human-robot collaboration (HRC) is still associated with various technical challenges. This applies especially to the realization of the operation methods speed and separation monitoring (SSM) as well as power and force limiting (PFL). Due to the limited consideration of the human motion behaviour, the required dynamic separation distance in SSM is frequently oversized in practice. The main consequences are wasted space as well as cycle time and performance losses within the corresponding HRC application. In PFL a physica
APA, Harvard, Vancouver, ISO, and other styles
10

Mishra, Smita Dixit, K. K. Singh, and S. Mukhopadhyay. "Assessment of Extent of Crystallization of CuCl2 (From Quaternary System of CuCl, CuCl2, HCl, and Water) and Its Limiting Conditions in Crystallization Step of Thermochemical Cu–Cl Cycle." In Green Energy and Technology. Springer Nature Singapore, 2024. http://dx.doi.org/10.1007/978-981-97-5419-9_14.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Limiting cycle"

1

Wu, Teng, and Hong Liu. "An Optimized Firmware-Based Cycle-by-Cycle Current Limiting Method for Power Electronic Converters in UPS." In 2025 IEEE Applied Power Electronics Conference and Exposition (APEC). IEEE, 2025. https://doi.org/10.1109/apec48143.2025.10977472.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Pint, B. A., R. Pillai, and S. Dryepondt. "High Temperature Oxidation Lifetime Modeling of Commercial Wrought NiCr." In CORROSION 2019. NACE International, 2019. https://doi.org/10.5006/c2019-12751.

Full text
Abstract:
Abstract To increase efficiency, a wide range of energy-related applications is pushing components to higher temperatures where environmental degradation can be life limiting. Unlike mechanical properties such as creep, there is no simple degradation parameter to capture the time-temperature-thickness limitations of candidate alloys. An initial model has been proposed and additional work is in progress to validate the model with longer-term exposures at 900°C and modify the model to capture additional service parameters such as cycle frequency and the effect of water vapor. Additional issues a
APA, Harvard, Vancouver, ISO, and other styles
3

Simpson, T. C., and J. D. Hoffman. "An EIS Method for Early Estimation of Scribe Creep of Painted Steel Sheet for Automotive Applications." In CORROSION 1997. NACE International, 1997. https://doi.org/10.5006/c1997-97267.

Full text
Abstract:
Abstract Evaluation of automotive coatings is often completed using laboratory cyclic tests. These tests use onset of red rusting and scribe creep to give an estimation of field performance of the materials. The most common automotive laboratory cyclic tests take 2-4 months to complete. These tests are often the rate limiting step in making progress toward product related decisions. This paper reports the use of EIS in combination with cyclic testing to estimate scribe creep performance. Materials were exposed in the GM 9540P-Cycle B laboratory test for 1 day or 8 days, and tested following re
APA, Harvard, Vancouver, ISO, and other styles
4

Adragna, Claudio, Emanuele De Bartolomeo, and Francesco Ferrazza. "Cycle-by-cycle Reverse Current Limiting in Actively Clamped Flyback Converters with Noncomplementary Control." In 2024 IEEE Applied Power Electronics Conference and Exposition (APEC). IEEE, 2024. http://dx.doi.org/10.1109/apec48139.2024.10509092.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Coulter, Stewart L., Mark W. McIntosh, Bert Bras, and David W. Rosen. "Identification of Limiting Factors for Improving Design Modularity." In ASME 1998 Design Engineering Technical Conferences. American Society of Mechanical Engineers, 1998. http://dx.doi.org/10.1115/detc98/dtm-5659.

Full text
Abstract:
Abstract In previous work, the idea of designing for the life cycle (DFLC) was investigated through the improvement of product architectures with an emphasis on increasing modularity. In this paper, that work is extended by developing a method for suggesting changes to the product to improve the correspondence between modules from different life-cycle viewpoints. Based on an analogy to the determination of critical paths in network analysis, the identification of limiting factors in a candidate design is intended to assist the designer in recognizing design changes that have the greatest impac
APA, Harvard, Vancouver, ISO, and other styles
6

Lugand, P., and C. Parietti. "Combined Cycle Plants With Frame 9F Gas Turbines." In ASME 1990 International Gas Turbine and Aeroengine Congress and Exposition. American Society of Mechanical Engineers, 1990. http://dx.doi.org/10.1115/90-gt-345.

Full text
Abstract:
The new 200 MW-class MS 9001F gas turbines allow combined cycle plants to reach even higher output levels and greater efficiency ratings. Size factor and higher firing temperatures, with a 3-pressure level steam reheat cycle, offer plant efficiencies in excess of 53 %. Heat recovery steam generators have been designed to accommodate catalytic reduction elements limiting flue gas NOx emissions to as low as 10 ppm VD (15 % O2). A range of steam turbine models covers the different possible configurations. Various arrangements based on the 350 or 650 MW power generation modules can be optimally co
APA, Harvard, Vancouver, ISO, and other styles
7

Chen, Pin-Chuan, Masahiko Hashimoto, Michael W. Mitchell, Dimitris E. Nikitopoulos, Steven A. Soper, and Michael C. Murphy. "Limiting Performance of High Throughput Continuous Flow Micro-PCR." In ASME 2004 International Mechanical Engineering Congress and Exposition. ASMEDC, 2004. http://dx.doi.org/10.1115/imece2004-62091.

Full text
Abstract:
Continuous flow polymerase chain reaction (CFPCR) devices are compact reactors suitable for microfabrication and the rapid amplification of target DNAs. For a given reactor design, the amplification time can be reduced simply by increasing the flow velocity through the isothermal zones of the device; for flow velocities near the design value, the PCR cocktail reaches thermal equilibrium at each zone quickly, so that near ideal temperature profiles can be obtained. However, at high flow velocities there are penalties of an increased pressure drop and a reduced residence time in each temperature
APA, Harvard, Vancouver, ISO, and other styles
8

Fukutani, Itaru, and Eiichi Watanabe. "Limiting Delivery Ratio Curves of Crankcase-Scavenged 2-Stroke Cycle Engines by Throttling the Inlet Port." In SAE International Congress and Exposition. SAE International, 1986. http://dx.doi.org/10.4271/860035.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Allison, Timothy C., and Aaron McClung. "Limiting Inlet Conditions for Phase Change Avoidance in Supercritical CO2 Compressors." In ASME Turbo Expo 2019: Turbomachinery Technical Conference and Exposition. American Society of Mechanical Engineers, 2019. http://dx.doi.org/10.1115/gt2019-90409.

Full text
Abstract:
Abstract In many supercritical CO2 cycle implementations, compressor or pump inlet conditions are relatively near the two-phase region. Fluid acceleration near the compressor inlet can result in the potential for condensation or cavitation at the inlet. Despite potential mitigating effects or evidence in the literature, potential two-phase operation is a high-risk condition and may not be recommended for high-reliability system design. This paper presents a summary of the existing literature documenting inlet phase change in sCO2, and presents an analysis of required conditions to avoid phase
APA, Harvard, Vancouver, ISO, and other styles
10

Mohagheghi, Mahmood, and Jayanta Kapat. "Thermodynamic Optimization of Recuperated S-CO2 Brayton Cycles for Solar Tower Applications." In ASME Turbo Expo 2013: Turbine Technical Conference and Exposition. American Society of Mechanical Engineers, 2013. http://dx.doi.org/10.1115/gt2013-94799.

Full text
Abstract:
Supercritical carbon dioxide (S-CO2) Brayton cycle represents significant advantages in solar tower application. Various configurations of S-CO2 Brayton cycle employing recuperation, recompression, intercooling and reheating have been investigated. The thermodynamic performance of each cycle configuration is optimized by using Genetic Algorithm in which the maximum cycle efficiency is defined as the objective function. The optimization process is comprehensive, i.e., the decision variables such as temperature and pressure of turbines, compressors, re-heaters, inter-coolers, and the pinch point
APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Limiting cycle"

1

King-Yuen Ng. The Hopf's limiting cycle -- A method to measure the electron cooling force. Office of Scientific and Technical Information (OSTI), 2002. http://dx.doi.org/10.2172/801549.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Acharya, Malhar, Ritika Divekar, Behailu Getachew, Krittika Gorur, and Joel Mumo. Can comprehensive and context-specific tools capture working conditions of CDWs for better interventions? Busara, 2024. http://dx.doi.org/10.62372/qvei1463.

Full text
Abstract:
Enabling child protection by building comprehensive, context-specific tools to capture child domestic worker environments. Child domestic work can deprive children of their right to education, expose them to physical and emotional abuse, and stunt their physical and cognitive development. Moreover, engaging in domestic work at a young age can perpetuate a cycle of poverty, denying children the opportunity to break free from socioeconomic constraints and limiting their potential for a better future.
APA, Harvard, Vancouver, ISO, and other styles
3

Fitzlaff, Milan, Gibran Khoury, Moritz Käß, Martin Werz, Bernd Gundelsweiler, and Stefan Weihe. Investigations on injection mold inserts with reduced thermal masses using additive manufacturing. Universidad de los Andes, 2024. https://doi.org/10.51573/andes.pps39.gs.im.3.

Full text
Abstract:
This work examined previously developed injection mold inserts with reduced thermal mass, with regard to lightweight construction approaches. These were optimised for oil-variothermal temperature control using simulative support. Additive manufacturing (AM), with its high degree of freedom in design, enables the implementation of individual, conformal cooling channels and can additionally support the efficiency of the variothermal process. The thermal mass of the injection mold is often a limiting factor in terms of process efficiency, which is also addressed in the analysis and optimisation c
APA, Harvard, Vancouver, ISO, and other styles
4

Secretariat, Commonwealth. Capital Market Policies to Achieve the Paris Agreement. Commonwealth Secretariat, 2022. https://doi.org/10.14217/comsec.969.

Full text
Abstract:
The world is not currently on course to limit global warming to 1.5 degrees Celsius. Carbon dioxide emissions are increasing, emissions targets in countries’ Nationally Determined Contributions are not ambitious enough, and oil and natural gas production are expected to increase given current policies. A lack of investment in the low-carbon economic transition partly explains this limited progress towards the Paris Agreement’s goals. Market imperfections explain this underinvestment in the low-carbon economic transition. Climate change is a tragedy of the horizons, as many of the costs of clim
APA, Harvard, Vancouver, ISO, and other styles
5

Thongchul, Nuttha. Development of itaconic acid production technology for bioplastic using immobilized Aspergillus terreus on natural fiber in the static bed bioreactor. Chulalongkorn University, 2015. https://doi.org/10.58837/chula.res.2015.99.

Full text
Abstract:
Aspergillus terreus was reported as the promising fungal strain for itaconic acid; however, the commercial production suffers from the low yield. Low production yield was claimed as the result of completing TCA cycle towards biomass synthesis while under limiting phosphate and nitrogen, TCA cycle was somewhat shunted and consequently the metabolite fluxes move towards itaconic acid production route. By regulating enzymes in TCA cycle, it is believed that itaconic acid production can be improved. One of the key responsible enzymes involved in itaconic acid production was triggered in this study
APA, Harvard, Vancouver, ISO, and other styles
6

Gallardo, Laura, Rafiq Hamdi, A. K. M. Saiful Islam, et al. What the Latest Physical Science of Climate Change Means for Cities. Indian Institute for Human Settlements, 2022. http://dx.doi.org/10.24943/supsv108.2022.

Full text
Abstract:
The 6 th Assessment Report cycle of the Intergovernmental Panel on Climate Change (AR6) comes at a precipitous moment in history. Human influence has warmed the planet, and widespread and rapid impacts are occurring to natural and human systems in all regions of the world. In response, immediate action is needed if there is to be any hope of limiting global warming to 1.5°C or well below 2°C below pre-industrial levels, as well as preparing for and adapting to current and future risks. The transformations needed in response to climate change will require decisive action in cities and urban are
APA, Harvard, Vancouver, ISO, and other styles
7

Jurkevitch, Edouard, Carol Lauzon, Boaz Yuval, and Susan MacCombs. role of nitrogen-fixing bacteria in survival and reproductive success of Ceratitis capitata, the Mediterranean fruit fly. United States Department of Agriculture, 2005. http://dx.doi.org/10.32747/2005.7695863.bard.

Full text
Abstract:
Objectives: to demonstrate nitrogen fixation in the gut of Ceratitiscapitata, the Mediterranean fruit fly and that fixed nitrogen is important for the fly. Background: Fruit flies (Diptera: Tephritidae) are a highly successful, widespread group of insects causing enormous economic damage in agriculture. They are anautogenous, i.e. the acquisition of nitrogenous compounds by both male and female is essential for the realization of their reproductive potential. Nitrogen, although abundant in the atmosphere, is paradoxically a limiting resource for multicellular organisms. In the Animalia, biolog
APA, Harvard, Vancouver, ISO, and other styles
8

Ramakrishnan, Aravind, Fangyu Liu, Angeli Jayme, and Imad Al-Qadi. Prediction of Pavement Damage under Truck Platoons Utilizing a Combined Finite Element and Artificial Intelligence Model. Illinois Center for Transportation, 2024. https://doi.org/10.36501/0197-9191/24-030.

Full text
Abstract:
For robust pavement design, accurate damage computation is essential, especially for loading scenarios such as truck platoons. Studies have developed a framework to compute pavement distresses as function of lateral position, spacing, and market-penetration level of truck platoons. The established framework uses a robust 3D pavement model, along with the AASHTOWare Mechanistic–Empirical Pavement Design Guidelines (MEPDG) transfer functions to compute pavement distresses. However, transfer functions include high variability and lack physical significance. Therefore, as an improvement to effecti
APA, Harvard, Vancouver, ISO, and other styles
9

Glynn, Simon. Unleashing multi-partisan support for climate action. Zero Ideas, 2024. http://dx.doi.org/10.70272/lzhq.

Full text
Abstract:
Acceptance of climate change as a Left-leaning political agenda is limiting support for climate action. New research across the G20 and beyond shows a large, untapped base of support on the political Right. We don’t see it because we don’t speak to it, so the support stays latent. If we learn to connect with this group, we can turn this vicious circle into a virtuous one, extend the support for climate policies from a minority to a majority, and achieve the cross-party consensus that can sustain climate commitments over multiple election cycles.
APA, Harvard, Vancouver, ISO, and other styles
10

Gustafsson, Marcus, and Stephanie Cordova. Värdeskapande av koldioxid från biogasproduktion. Linköping University Electronic Press, 2023. http://dx.doi.org/10.3384/9789180753838.

Full text
Abstract:
arbon dioxide (CO₂) has a negative impact on the climate, but it also has several practical areas of use. Many industrial processes emit CO₂ in high concentrations, which could be captured to mitigate emissions while also creating valuable products. One example of such a process is biogas upgrading – a process separating renewable gases, where methane is taken care of for use as vehicle fuel or industrial energy carrier, while CO₂ is released into the atmosphere. The aim of this project has been to chart alternatives and technologies for taking care of green CO₂ from biogas upgrading, so-calle
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Limiting cycle' for particular source types:
Journal articles
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography