Log in

Relevant bibliographies by topics / Luting Agents

Contents

Journal articles
Dissertations / Theses
Books
Book chapters
Conference papers

Academic literature on the topic 'Luting Agents'

Author: Grafiati

Published: 3 June 2025

Last updated: 31 July 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Luting Agents.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Luting Agents"

1

Kulkarni, Prasad, and S. Raghavendra Jayesh. "Luting Agents used in Prosthodontics." International Journal of Science and Research (IJSR) 12, no. 9 (2023): 1169–72. http://dx.doi.org/10.21275/sr23911124906.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Spazzin, AO, GB Guarda, A. Oliveira-Ogliari, FB Leal, L. Correr-Sobrinho, and RR Moraes. "Strengthening of Porcelain Provided by Resin Cements and Flowable Composites." Operative Dentistry 41, no. 2 (2016): 179–88. http://dx.doi.org/10.2341/15-025-l.

Full text

Abstract:

SUMMARY This study evaluated the effect of mechanical properties of resin-based luting agents on the strength of resin-coated porcelain. The luting agents tested were two flowable resin composites (Filtek Z350 Flow and Tetric-N Flow), a light-cured resin cement (Variolink Veneer [VV]), and a dual-cured resin cement (Variolink II) in either light-cured (base paste) or dual-cured (base + catalyst pastes [VD]) mode. Flexural strength (σf) and modulus of elasticity (Ef) of the luting agents were measured in three-point bending mode (n=5). Porcelain discs (Vita VM7) were tested either untreated (co

APA, Harvard, Vancouver, ISO, and other styles

3

Pameijer, Cornelis H. "A Review of Luting Agents." International Journal of Dentistry 2012 (2012): 1–7. http://dx.doi.org/10.1155/2012/752861.

Full text

Abstract:

Due to the availability of a large number of luting agents (dental cements) proper selection can be a daunting task and is usually based on a practitioner’s reliance on experience and preference and less on in depth knowledge of materials that are used for the restoration and luting agent properties. This review aims at presenting an overview of current cements and discusses physical properties, biocompatibility and other properties that make a particular cement the preferred choice depending on the clinical indication. Tables are provided that outline the different properties of the generic c

APA, Harvard, Vancouver, ISO, and other styles

4

Barath, V. S., F. J. Faber, S. Westland, and W. Niedermeier. "Spectrophotometric Analysis of All-ceramic Materials and Their Interaction with Luting Agents and Different Backgrounds." Advances in Dental Research 17, no. 1 (2003): 55–60. http://dx.doi.org/10.1177/154407370301700113.

Full text

Abstract:

In this study, two All-Ceramic (AC) materials—Empress 2 (EMP) (Ivoclar Vivadent AG, Schaan, Liechtenstein) and In-Ceram ALUMINA (ICA) (Vita Zahnfabrik, Bad Säckingen, Germany)—were analyzed, along with the effects of 3 luting agents— viz. Zinc Phosphate cement (ZNPO, PhospaCEM PL, Ivoclar Vivadent AG, Schaan, Liechtenstein), Glass Ionomer Cement (GIC, Ketac-Cem Radiopaque, ESPE Dental AG, Seefeld, Germany), and Compolute (COMP, ESPE Dental AG, Seefeld, Germany)—on the final color, using the CIELab system. Color differences (DeltaL, Deltaa, Deltab, and DeltaE) were calculated for samples with l

APA, Harvard, Vancouver, ISO, and other styles

5

Dingari, Mamatha, Sujesh M, Ravi Kumar C, Rajanikanth A, Chalapathi Rao Duggineni, and Harilal G. "A comprehensive review on bonding between monolithic ceramics and tooth structure with different adhesive agents." International Journal of Dental Materials 04, no. 02 (2022): 46–50. http://dx.doi.org/10.37983/ijdm.2022.4205.

Full text

Abstract:

Reliable bonding between the prepared tooth and monolithic ceramics can be achieved by various luting agents available on the market. The selection of luting agent and cementation technique plays an important role in the success of the restoration. With the advent of resin-based adhesive systems as luting agents, clinicians' perspectives have changed to a more conservative approach. Recent systems, chemically adhere athe crowns to the prepared tooth structure showing higher bond strength. To reach the aesthetic demands of the patients, all-ceramic restorations were considered over metal-cerami

APA, Harvard, Vancouver, ISO, and other styles

6

Dingari, Mamatha, Sujesh M, Ravi Kumar C, Rajanikanth A, Chalapathi Rao Duggineni, and Harilal G. "A comprehensive review on bonding between monolithic ceramics and tooth structure with different adhesive agents." International Journal of Dental Materials 04, no. 02 (2022): 46–50. http://dx.doi.org/10.37983/ijdm.2022.4205.

Full text

Abstract:

Reliable bonding between the prepared tooth and monolithic ceramics can be achieved by various luting agents available on the market. The selection of luting agent and cementation technique plays an important role in the success of the restoration. With the advent of resin-based adhesive systems as luting agents, clinicians' perspectives have changed to a more conservative approach. Recent systems, chemically adhere athe crowns to the prepared tooth structure showing higher bond strength. To reach the aesthetic demands of the patients, all-ceramic restorations were considered over metal-cerami

APA, Harvard, Vancouver, ISO, and other styles

7

Moris, Izabela Cristina Maurício, Juliana Elias de Oliveira, Adriana Cláudia Lapria Faria, Ricardo Faria Ribeiro, and Renata Cristina Silveira Rodrigues. "In Vitro Fit and Cementation Resistance of Provisional Crowns for Single Implant-Supported Restorations." Brazilian Dental Journal 26, no. 5 (2015): 468–73. http://dx.doi.org/10.1590/0103-6440201300289.

Full text

Abstract:

Abstract: This study aimed to verify marginal fit and the effect of cement film thickness standardization on retention of provisional crowns made with prefabricated acrylic cylinders on abutments, using two temporary luting agents subjected or not to mechanical cycling. Provisional crowns were made from bis-acryl (Luxatemp Fluorescence) or methyl methacrylate (Duralay) resins on acrylic cylinders and marginal fit and cement film thickness were evaluated. For retention evaluation, crowns were cemented with two temporary luting agents: non-eugenol zinc oxide (Tempbond NE) or calcium hydroxide-ba

APA, Harvard, Vancouver, ISO, and other styles

8

Alsahli, Ahmad, Mirza Rustum Baig, Jagan Kumar Baskaradoss, Shoug Alsanea, and Athoub AlMousawi. "Factors Influencing the Selection of Materials and Luting Agents for Single-Crown Restorations." Dentistry Journal 13, no. 5 (2025): 207. https://doi.org/10.3390/dj13050207.

Full text

Abstract:

Objective: Selecting suitable materials and luting agents for single crowns is critical yet challenging, as dentists must consider different factors. This study aimed to assess dentists’ preferences for materials and luting agents under different clinical conditions and evaluate the nonclinical factors influencing their preferences. Methods: A paper-based survey supplemented with photographs illustrating anterior and posterior single-crown preparation designs was used, incorporating three clinical scenarios for each as examples. Participants provided demographic data and were asked to select t

APA, Harvard, Vancouver, ISO, and other styles

9

Yoshida, Keiichi, Kazunori Funaki, Mika Tanagawa, Hideo Matsumura, Takuo Tanaka, and Mitsuru Atsuta. "Properties of Commercially Available Luting Agents." Nihon Hotetsu Shika Gakkai Zasshi 39, no. 1 (1995): 35–40. http://dx.doi.org/10.2186/jjps.39.35.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

Hondrum, Steven O. "Storage stability of dental luting agents." Journal of Prosthetic Dentistry 81, no. 4 (1999): 464–68. http://dx.doi.org/10.1016/s0022-3913(99)80015-8.

Full text

APA, Harvard, Vancouver, ISO, and other styles

More sources

Dissertations / Theses on the topic "Luting Agents"

1

Osman, Saad AbuBakr. "The role of adhesive resin luting agents in crown retention." Thesis, University of Newcastle Upon Tyne, 2000. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.311998.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Lima, Michele de Oliveira 1991. "Influência do preaquecimento nas propriedades físicas de agentes cimentantes fotoativados através de diferentes espessuras de cerâmica = Influence of pre-heating on the physical properties of luting agents photoactivated through different ceramic thicknesses." [s.n.], 2015. http://repositorio.unicamp.br/jspui/handle/REPOSIP/288862.

Full text

Abstract:

Orientador: Flávio Henrique Baggio Aguiar<br>Dissertação (mestrado) - Universidade Estadual de Campinas, Faculdade de Odontologia de Piracicaba<br>Made available in DSpace on 2018-08-27T16:00:43Z (GMT). No. of bitstreams: 1 Lima_MicheledeOliveira_M.pdf: 1194610 bytes, checksum: 09e2b8319999015738ccee35c170ebb8 (MD5) Previous issue date: 2015<br>Resumo: O propósito deste estudo "in vitro" foi avaliar a influência do preaquecimento e ativação de agentes de fixação através de blocos cerâmicos sobre suas propriedades físicas. Para tanto, os agentes cimentantes RelyX Arc (RXA; 3M/ESPE), RelyX Ult

APA, Harvard, Vancouver, ISO, and other styles

3

Carvalho, Carlos Augusto Ramos de. "Efeito da técnica úmida simplificada de adesão com etanol na cimentação intraradicular de pinos de fibra." Universidade de São Paulo, 2011. http://www.teses.usp.br/teses/disponiveis/25/25131/tde-05122011-092428/.

Full text

Abstract:

Este estudo avaliou a resistência ao deslocamento vertical push-out de pinos de fibra de vidro cimentados à dentina intra-radicular utilizando uma resina fluida padrão como agente cimentante em combinação com um adesivo dentinário experimental e um adesivo disponível comercialmente. 20 pré-molares unirradiculares humanos foram previamente extraídos e tratados endodonticamente. Os espécimes foram divididos em quatro estratégias de união a dentina: Grupo 1 com adesivo experimental com etanol na proporção em volume 1:1 (resina/etanol) e Grupo 2 com adesivo experimental com etanol na proporção e

APA, Harvard, Vancouver, ISO, and other styles

4

Villias, Aristeidis [Verfasser]. "Effects of cementation on exposed luting agent profile at implant-supported crowns / Aristeidis Villias." Köln : Deutsche Zentralbibliothek für Medizin, 2016. http://d-nb.info/1081824557/34.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Habekost, Luciano de Vargas. "Influência da incorporação de nanoparticulas e utilização de monômeros ácidos como agentes de união em cimentos resinosos." Universidade Federal de Pelotas, 2011. http://repositorio.ufpel.edu.br/handle/ri/2260.

Full text

Abstract:

Made available in DSpace on 2014-08-20T14:30:12Z (GMT). No. of bitstreams: 1 Tese _Luciano_de_Vargas_ Habekost.pdf: 2287600 bytes, checksum: 421084441401a2957e40573944b6a691 (MD5) Previous issue date: 2011-01-14<br>The objective of this study was to investigate the influence of nanoparticle loading and the use of silane (TSPM), phosphate (PAM) or carboxylic (CAM) methacrylates as coupling agents on key properties of experimental resin luting agents. An experimental photocurable resin blend composed with 50 wt% of Bis-GMA and 50 wt% of TEGDMA was obtained. To study the influence nanoparticl

APA, Harvard, Vancouver, ISO, and other styles

6

Farina, Ana Paula. "Estudo ex vivo da resistência de união de pinos de fibra às paredes do canal radicular utilizando diferentes cimentos." Universidade de São Paulo, 2009. http://www.teses.usp.br/teses/disponiveis/58/58131/tde-19022009-163351/.

Full text

Abstract:

O objetivo deste estudo foi avaliar ex vivo a resistência de união de pinos de fibra de vidro (FV) e pinos de fibra de carbono (FC) nos terços cervical, médio e apical do canal radicular, cimentados com dois tipos de cimentos resinosos: auto-adesivo (RX) e convencionais (CP). Quarenta caninos superiores foram separados em 4 grupos (n = 10) de acordo com o cimento e pino utilizado. Após a secção transversal dos dentes em fatias de 2mm de espessura, o teste de resistência adesiva (0,5mm/min) foi realizado nos terços cervical, médio e apical de cada espécime. Cinco espécimes de cada grupo foram a

APA, Harvard, Vancouver, ISO, and other styles

7

Hernandes, da Fonseca Natália Maria Aparecida 1986. "Influência do pré-aquecimento na resistência de união de agentes cimentantes utilizados para a fixação de pinos de fibra de vidro = Influence of pre-heating on the bond strength of fiber posts cemented with different lutting agents." [s.n.], 2015. http://repositorio.unicamp.br/jspui/handle/REPOSIP/288864.

Full text

Abstract:

Orientador: Flávio Henrique Baggio Aguiar<br>Tese (doutorado) - Universidade Estadual de Campinas, Faculdade de Odontologia de Piracicaba<br>Made available in DSpace on 2018-08-27T07:51:28Z (GMT). No. of bitstreams: 1 HernandesdaFonseca_NataliaMariaAparecida_D.pdf: 1562377 bytes, checksum: a4799c4175306d178b320a7dce350a1e (MD5) Previous issue date: 2015<br>Resumo: Este estudo in vitro avaliou a influência do pré-aquecimento na resistência de união de três agentes utilizados para a cimentação de pinos de fibra de vidro Reforpost nº 2. Para tal propósito, foram utilizadas 42 raízes de pré-mola

APA, Harvard, Vancouver, ISO, and other styles

8

Calabrez, Filho Saturnino [UNESP]. "Avaliação in vitro da infiltração marginal em inlays de resinas compostas em função de tipos de fontes de luz e agentes de cimentação." Universidade Estadual Paulista (UNESP), 2005. http://hdl.handle.net/11449/101383.

Full text

Abstract:

Made available in DSpace on 2014-06-11T19:31:26Z (GMT). No. of bitstreams: 0 Previous issue date: 2005-09-14Bitstream added on 2014-06-13T19:41:15Z : No. of bitstreams: 1 calabrezfilho_s_dr_arafo.pdf: 1543575 bytes, checksum: 53cda3ebc681f14a9c6a7769226d8a18 (MD5)<br>Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)<br>O objetivo deste trabalho foi avaliar a infiltração marginal da resina Flow Filtek e do cimento resinoso dual RelyX na fixação de inlays de cerômeros fotoativados com LEDs e Luz Halógena. Foram selecionados 32 dentes íntegros recém-extraídos armazenados em

APA, Harvard, Vancouver, ISO, and other styles

9

Calabrez, Filho Saturnino. "Avaliação in vitro da infiltração marginal em inlays de resinas compostas em função de tipos de fontes de luz e agentes de cimentação /." Araraquara : [s.n.], 2005. http://hdl.handle.net/11449/101383.

Full text

Abstract:

Orientador: Marcelo Ferrarezi de Andrade<br>Banca: José Roberto Cury Saad<br>Banca: Osmir Batista de Oliveira Júnior<br>Banca: Luis Henrique Borges<br>Banca: Fernando Carlos Hueb de Menezes<br>Resumo: O objetivo deste trabalho foi avaliar a infiltração marginal da resina Flow Filtek e do cimento resinoso dual RelyX na fixação de inlays de cerômeros fotoativados com LEDs e Luz "Halógena". Foram selecionados 32 dentes íntegros recém-extraídos armazenados em solução de soro fisiológico no freezer, divididos em quatro grupos: Grupo I - aparelho Elipar FreeLight e resina Flow Filtek; Grupo II -

APA, Harvard, Vancouver, ISO, and other styles

10

Chotiwannaporn, Pavinee 1980. "Quantitative comparison of nanoleakage among five resin luting agents after aging." Thesis, 2012. http://hdl.handle.net/1805/2805.

Full text

Abstract:

Indiana University-Purdue University Indianapolis (IUPUI)<br>Potential problems of one-step adhesives have been identified, including water uptake and subsequent plasticization, water-and enzyme-induced nanoleakage, and the presence of voids due to phase-separation or osmosis. Clinically, adhesive failures due to marginal degradation present as retention loss, marginal discoloration, and secondary caries. However, the mechanisms of adhesive interface degradation of self-etching and self-bonding resin luting agents are not fully understood. The objective of the study was to investigate adhesi

APA, Harvard, Vancouver, ISO, and other styles

More sources

Books on the topic "Luting Agents"

1

Dubois, Pierre. La grande encyclopédie des lutins: Nains, gobelins, pixies, gnomes, farfadets, brownies ... Hoëbeke, 1992.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

2

El-Naga, Ahmed Attia Abo. Influence of cyclic loading and luting agents on the fracture load of two all-ceramic crown systems. 2006.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

3

Dubois, Pierre. Agenda des lutins MCMXCIV 1994. HOEBEKE, 1993.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

4

various and Pierre DuBois. La Grande Enyclopedie Des Lutins. Union Distribution, 1994.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

5

Sénamaud, Marie-Loïc. Agenda 2022 des Fées, Lutin, déesses et Autres Personnages Fantastiques à Colorier. Blurb, Incorporated, 2021.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

Book chapters on the topic "Luting Agents"

1

Trushkowsky, Richard D. "Luting agents." In Esthetic Dentistry. Elsevier, 2015. http://dx.doi.org/10.1016/b978-0-323-09176-3.00021-8.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Singh, Hasandeep, Brahmjot Singh, Ankita Rajput, et al. "Chemomodulatory Potential of Lutein Derived from Dietary Sources." In Functional Foods for Health Maintenance: Understanding their Role in Cancer Prevention. BENTHAM SCIENCE PUBLISHERS, 2023. http://dx.doi.org/10.2174/9789815179217123010013.

Full text

Abstract:

The mortality rate from various types of cancer is unacceptably high till date. Although, there is a huge advancement in understanding the diverse mechanisms of carcinogenesis and the development of potential drug leads, still there are massive mortality rates. The consumption of various green/yellow vegetables and fruits can help in reducing the risk of cancer. There is a plethora of potential anticancer compounds present in green leafy vegetables, which have been extensively evaluated in cancer. Various anticancer leads include dietary agents in which carotenoids are very significant in comb

APA, Harvard, Vancouver, ISO, and other styles

3

Ajith, Dr Aiswarya, Dr Rajan Dhawan, and Dr Kirti Makan. "RECENT ADVANCES IN ROOT CANAL SEALERS." In Futuristic Trends in Medical Sciences Volume 3 Book 14. Iterative International Publisher, Selfypage Developers Pvt Ltd, 2024. http://dx.doi.org/10.58532/v3bfms14p2ch6.

Full text

Abstract:

Chief objective of endodontic therapy is obturation with andimensionally stable, inert and compatible sealer of prepared root canal system which will delivera hermetic seal by binding to all walls of the canal. Its use is of significance as a three-dimensional seal of the canal space is achieved with the help of sealer during obturation of the canal 4. Fundamental obturation material, such as gutta-percha points, slides in and become fixed in the canalas sealer functions as a luting agent andlubricant during obturation. New advancements have been used to develop sealers that have much better p

APA, Harvard, Vancouver, ISO, and other styles

4

Ali, Shazia, Asiya Batool, Asma Tariq, et al. "Nutrition and Cancer." In Handbook of Research on Advancements in Cancer Therapeutics. IGI Global, 2021. http://dx.doi.org/10.4018/978-1-7998-6530-8.ch021.

Full text

Abstract:

Cancer is the second biggest killer worldwide. It has been estimated that specific lifestyle and dietary measures can prevent 30–40% of all cancers. Consumption of nutrient sparse foods, such as refined flour products and concentrated sugars, consumption of red meat, low fibre intake, and disproportion of omega 3 and omega 6 fatty acids, contributes to cancer risks. Microbiological and chemical food contaminants as well as conventional and industrial food processing methods may further increase the carcinogenicity of diets while protective agents in a cancer prevention diet include folic acid,

APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Luting Agents"

1

Santos, Luiz F. S. Eugênio dos, Claus Aranha, and André P. de L. F. de Carvalho. "An agent-based approach to procedural city generation incorporating Land Use and Transport Interaction models." In Encontro Nacional de Inteligência Artificial e Computacional. Sociedade Brasileira de Computação - SBC, 2022. http://dx.doi.org/10.5753/eniac.2022.227605.

Full text

Abstract:

We apply the knowledge of urban settings established with the study of Land Use and Transport Interaction (LUTI) models to develop reward functions for an agent-based system capable of planning realistic artificial cities. The system aims to replicate in the micro scale the main components of real settlements, such as zoning and accessibility in a road network. Moreover, we propose a novel representation for the agent’s environment that efficiently combines the road graph with a discrete model for the land. Our system starts from an empty map consisting only of the road network graph, and the

APA, Harvard, Vancouver, ISO, and other styles

2

Ibrahim, T., M. Gheith, and Mohamed Abdel Harith. "Evaluation Of The Shear Bond Strength Between Dentin And Dental Luting Cement Following Dentin Surface Treatment By 980 Nm Diode Laser And Desensitizing Agent." In THE 8TH INTERNATIONAL CONFERENCE ON LASER APPLICATIONS - ICLA 2011. AIP, 2011. http://dx.doi.org/10.1063/1.3631808.

Full text

APA, Harvard, Vancouver, ISO, and other styles

We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!