Log in

Relevant bibliographies by topics / Metal strips / Journal articles

To see the other types of publications on this topic, follow the link: Metal strips.

Journal articles on the topic 'Metal strips'

Author: Grafiati

Published: 3 June 2025

Last updated: 31 July 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the top 50 journal articles for your research on the topic 'Metal strips.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Browse journal articles on a wide variety of disciplines and organise your bibliography correctly.

1

Nakamura, Ryoji, Masakazu Sawai, Ryoji Nakamura, H. Watari, and S. Kumai. "Casting of Clad Strip by an Unequal Diameter Twin Roll Caster." Materials Science Forum 638-642 (January 2010): 413–18. http://dx.doi.org/10.4028/www.scientific.net/msf.638-642.413.

Full text

Abstract:

An unequal diameter twin roll caster which can cast clad strips was devised and assembled. The casting of the clad strip was tried, and fabrication of the clad strip was attained. This twin roll caster was planned for the process saving. The clad strip was assembled directly from AA3003 molten metal and AA4045 molten metal at speed of 20m/min. The Si-diffusion-area between the strips was very narrow, and the interface between the strips was clear. The strips were bonded firmly. The strips were not pealed by the cold rolling and the continuous bending.

APA, Harvard, Vancouver, ISO, and other styles

2

Zhou, Meijie, Liqun Ai, Lukuo Hong, Caijiao Sun, Yuqing Zhou, and Fanjun Meng. "Decarburisation of Fe-C alloy strips by gas–solid reaction in Ar-CO-CO₂." Metallurgical Research & Technology 119, no. 1 (2022): 108. http://dx.doi.org/10.1051/metal/2021092.

Full text

Abstract:

The gas–solid reaction decarburisation of cast iron strips is a direct steel production method with low production costs. In this study, the decarburisation kinetics of Fe-C alloy strips in an Ar-CO-CO2 atmosphere were investigated. Fe-C alloy strips with 4.2 wt.% C and different thicknesses (1, 1.5, and 2 mm) were used for the decarburisation experiments under temperatures of 1293, 1353, and 1413 K. The results indicate that, under appropriate mixed gas conditions, rapid decarburisation can be achieved. With an increase in the decarburisation temperature, the decarburisation rate increases si

APA, Harvard, Vancouver, ISO, and other styles

3

Ma, Xiaobao, Dongcheng Wang, Hongmin Liu, and Shuai Zhang. "Influence of profile indicators of hot-rolled strip on transverse thickness difference of cold-rolled silicon steel." Metallurgical Research & Technology 116, no. 1 (2018): 105. http://dx.doi.org/10.1051/metal/2018044.

Full text

Abstract:

In order to evaluate the transverse thickness difference of cold-rolled strips according to the information of hot-rolled strips and scientifically guide the setting of the indicators of the hot-rolled silicon strip, the influence model about the relation of the transverse thickness difference of cold-rolled strip to the profile indicators of hot-rolled strip is established in this paper based on simulation results. The transverse thickness difference of cold-rolled strip predicted based on the influence model have strong correspondences to the measured data. Based on the influence model and t

APA, Harvard, Vancouver, ISO, and other styles

4

Wang, Jian Guo, Zhen Hua Wang, Yuan Ming Liu, Tao Wang, and Qing Xue Huang. "Effects of annealing temperature on the comprehensive properties of ultrathin niobium strips." Metallurgical Research & Technology 119, no. 6 (2022): 614. http://dx.doi.org/10.1051/metal/2022101.

Full text

Abstract:

Ultrathin niobium strips with thicknesses of 20, 30, and 40 µm were prepared by an accumulative roll process. The evolution of the microstructure, texture and mechanical properties of ultrathin Nb strips with different thicknesses at different annealing temperatures was studied by an electronic universal tensile testing machine and EBSD analysis. The results show that the whole process of grain recovery, recrystallization, complete recrystallization, and grain growth occurs with increasing annealing temperature. The complete recrystallization temperature increased as the thickness increased, a

APA, Harvard, Vancouver, ISO, and other styles

5

Hwang, Y. M., H. S. R. Tsui, and S. N. Tsai. "Study of plane strain compression of composite sheets." Journal of Physics: Conference Series 2631, no. 1 (2023): 012003. http://dx.doi.org/10.1088/1742-6596/2631/1/012003.

Full text

Abstract:

Abstract In the plane strain compression of multi-layers metal, each layer of metal shows a different degree of deformation due to the differences in material properties. Also, the deformation in different positions of a metal layer is always inhomogeneous. In this study, the effects of material ratios, friction between the metal layers and the amount of compression on the deformation behaviors of a bi-layer metal strip under plane strain compression are investigated. 2D plane strain finite element simulation models of AISI-1008/AL6061-T6 bi-layer metal strips are used. The results indicate th

APA, Harvard, Vancouver, ISO, and other styles

6

Stockert, Sven, Matthias Wehr, Johannes Lohmar, Gerhard Hirt, and Dirk Abel. "Development of a Laser Triangulation Gauge for High Precision Strip Thickness Control." Advanced Materials Research 1140 (August 2016): 107–14. http://dx.doi.org/10.4028/www.scientific.net/amr.1140.107.

Full text

Abstract:

Almost all metal strips with thicknesses of < 2 mm are produced by cold rolling. Thickness variations of cold rolled strips are caused by various factors like fluctuation in strength of the material, the eccentricity of the rolls or thickness variation of the incoming strip. As the demands concerning the thickness variation are ever increasing the Institute of Automatic Control and the Institute of Metal Forming aim at reducing the thickness tolerance of thin, cold-rolled steel and copper strips to 1 μm. As high frequency disturbances are expected, it is assumed that this goal can only be a

APA, Harvard, Vancouver, ISO, and other styles

7

Steytler, Megan, and Robert Knutsen. "Identifying Challenges to the Commercial Viability of Direct Powder Rolled Titanium: A Systematic Review and Market Analysis." Materials 13, no. 9 (2020): 2124. http://dx.doi.org/10.3390/ma13092124.

Full text

Abstract:

A systematic review of factors affecting the viability of direct powder rolling (DPR) as a process route for producing low-cost titanium metal strips was conducted by consolidating performance and process data from published research. Included is a market analysis that was performed by sourcing price points from powder and wrought product suppliers. As a result of the typical oxygen levels (>0.2 wt %) in low-cost powders, the performance of the DPR product is estimated at best to be comparable to ASTM grade 3 and 4 wrought products. Furthermore, evidence supporting chlorine levels >0.02

APA, Harvard, Vancouver, ISO, and other styles

8

Nakamura, Ryoji, Masakazu Sawai, Ryoji Nakamura, Takanori Yamabayashi, Shinji Kumai, and Hisaki Watari. "Roll Casting of Three Layers Clad Strip." Key Engineering Materials 443 (June 2010): 128–33. http://dx.doi.org/10.4028/www.scientific.net/kem.443.128.

Full text

Abstract:

A roll caster, which could cast the three layers of clad strip directly from the molten metal, was designed, assembled and tested. The base strip was AA3003 aluminum alloy and overlay strips were AA4045 aluminum alloy. An unequal diameter twin roll caster was modified to cast clad strip. Two small rolls were amounted on a large roll. A scraper plate was used to prevent the mixture of the different kinds of melts. The casting of three strips and the connecting of strips could be operated by one roll caster. The interfaces between the strips were clear, and the mixture of the melt did not occur.

APA, Harvard, Vancouver, ISO, and other styles

9

Zhu, Zhiwang, Menglong Xing, Minghan Sun, Jieping Wei, and Fengshan Du. "Effect of vibration on the formation of second phase particles in cast-rolling strips." Metallurgical Research & Technology 116, no. 6 (2019): 629. http://dx.doi.org/10.1051/metal/2019046.

Full text

Abstract:

Taking 20CrMn steel as the experimental object, the vibration and non-vibration cast-rolling comparison experiments were carried out on the self-developed twin-roll strip vibration cast-rolling mill. And a series of tests such as tensile test, fracture morphology observation and energy spectrum analysis were carried out on the obtained cast-rolling strips. This paper focuses on the analysis of the test results from the perspective of the second phase particles, in order to explore the effect of vibration on the precipitation of the second phase particles in cast-rolling. The analysis results s

APA, Harvard, Vancouver, ISO, and other styles

10

Steinberg, Katrin, Marc Scheffler, and Martin Dressel. "Microwave inductance of thin metal strips." Journal of Applied Physics 108, no. 9 (2010): 096102. http://dx.doi.org/10.1063/1.3505706.

Full text

APA, Harvard, Vancouver, ISO, and other styles

11

Poormir, Mohammad Amin, Seyed Mohammad Reza Khalili, and Reza Eslami-Farsani. "Optimal design of a bio-inspired self-healing metal matrix composite reinforced with NiTi shape memory alloy strips." Journal of Intelligent Material Systems and Structures 29, no. 20 (2018): 3972–82. http://dx.doi.org/10.1177/1045389x18803448.

Full text

Abstract:

Utilizing smart materials such as shape memory alloys as reinforcement in metal matrix composites is a novel method to bio-mimic self-healing. This study aims to investigate the influence of design factors of a self-healing metal matrix composite by employing the Taguchi method for designing of the experimental procedure. Three design factors, each in three levels, were studied simultaneously according to L-9 standard Taguchi orthogonal array to determine the optimal level of each factor in mechanical properties enhancement with a reduced number of experiments. Composite specimens were fabrica

APA, Harvard, Vancouver, ISO, and other styles

12

Yang, J. H., S. J. Lee, S. S. Eum, K. H. No, and Yi K.J. "Development of a system for - The control of the transverse temperature profile of strips in hot strip mills." Revue de Métallurgie 93, no. 10 (1996): 1257–64. http://dx.doi.org/10.1051/metal/199693101257.

Full text

APA, Harvard, Vancouver, ISO, and other styles

13

Palanisamy, Sundaramoorthy, Veronika Tunakova, Shi Hu, et al. "Electromagnetic Interference Shielding of Metal Coated Ultrathin Nonwoven Fabrics and Their Factorial Design." Polymers 13, no. 4 (2021): 484. http://dx.doi.org/10.3390/polym13040484.

Full text

Abstract:

Electromagnetic (EM) radiation is everywhere in this world and galaxy in different forms and levels. In some cases, human beings need to protect themselves from electromagnetic radiations and the same thing is also recommended for electronic devices as well. Lots of studies are there on the shielding of electromagnetic radiation interference using metals, polymers, and minerals. For protecting the human being, textile structures are playing the main role. In the textile material structure itself many types are there; each one is having its unique geometrical shape and design. In this work, the

APA, Harvard, Vancouver, ISO, and other styles

14

Sahoo, Seshadev. "Review on Vertical Twin-Roll Strip Casting: A Key Technology for Quality Strips." Journal of Metallurgy 2016 (August 9, 2016): 1–13. http://dx.doi.org/10.1155/2016/1038950.

Full text

Abstract:

Nowadays near-net-shape casting technology is an important area of research in the iron and steel industry. Among different kinds of near-net-shape casting process, twin-roll casting process has received much attention among researchers. Twin-roll casting (TRC) has been the subject of extensive research, not only to develop the technology but also to achieve an understanding of microstructural evolution and to produce quality strips. The main issues concerning the design and operation of twin-roll casters are metal-mold heat transfer, metal delivery system, and their possible effects on the so

APA, Harvard, Vancouver, ISO, and other styles

15

Haga, Toshio. "Twin Roll Caster for Clad Strip." Metals 11, no. 5 (2021): 776. http://dx.doi.org/10.3390/met11050776.

Full text

Abstract:

Production of aluminum alloy clad strips requires many processes, and a reduction in the number of processes has long been demanded. A method to cast clad strips directly from molten metal using a twin roll caster with copper rolls is proposed in this work. Two types of twin roll casters were designed and tested. One was a vertical-type tandem twin roll caster and the other was a twin roll caster equipped with a scraper. The casting of the clad strips was conducted in an oxidizing atmosphere. The clad strips were cast at speeds higher than 15 m/min. This casting speed is much higher than that

APA, Harvard, Vancouver, ISO, and other styles

16

Kong, Y. H., S. Y. Chen, G. L. Zhang, and X. Fu. "A Tunable 3-Terminal GMR Device Based on a Hybrid Magnetic-Electric-Barrier Nanostructure." Journal of Nanomaterials 2013 (2013): 1–5. http://dx.doi.org/10.1155/2013/316897.

Full text

Abstract:

We propose a giant magnetoresistance (GMR) device, which can be experimentally realized by depositing two ferromagnetic (FM) strips and a Schottky metal (SM) stripe in parallel configuration on top of the GaAs heterostructure. The GMR effect ascribes a significant electron transmission difference between the parallel and antiparallel magnetization configurations of two FM stripes. Moreover, the MR ratio depends strongly on the magnetic strength of the magnetic barrier (MB) and the electric barrier (EB) height induced by an applied voltage to the SM stripe. Thus, this system can be used as a GM

APA, Harvard, Vancouver, ISO, and other styles

17

Skachkov, V., and V. Anischenko. "TECHNOLOGICAL PARAMETERS OF CONTINUOUS CASTING OF STEEL." EurasianUnionScientists 5, no. 1(82) (2021): 16–21. http://dx.doi.org/10.31618/esu.2413-9335.2021.5.82.1232.

Full text

Abstract:

The analysis of the casting of metal is carried out and a number of factors influencing the qualitative formation of metal strips are revealed. Attention is focused on the formation of a solid layer on the mold rolls, the possibility of controlling the deformation zone and heat transfer between the mold rolls. The conditions for the formation of stripes were compared during two-roll, single-roll casting-rolling and metal freezing.

APA, Harvard, Vancouver, ISO, and other styles

18

Haga, Toshio, Maho Tsuchida, Hirotaka Sakata, Hisaki Watari, and Shinichi Nishida. "Globular Crystals in the Center of Roll Cast Aluminum Alloy Strips." Materials Science Forum 1007 (August 2020): 34–40. http://dx.doi.org/10.4028/www.scientific.net/msf.1007.34.

Full text

Abstract:

This study investigated the crystallization position and formation mechanism of globular crystals at the center area in the thickness direction of aluminum alloy strips cast by a high-speed twin roll caster. Twin roll casters for single strips and clad strips were used, as well as twin roll casters equipped with a cooling slope. The globular crystals were formed from dividing arms of dendrites of the solidified layer facing the center area at the roll gap. The arms of isolated dendrite also divided. No globular crystals were formed at the interfaces of clad strips with different solidification

APA, Harvard, Vancouver, ISO, and other styles

19

De Paepe, A., J. C. Herman, P. Hekker, and E. F. M. Jansen. "Metallurgical aspects for the production of formable thin hot strips." Revue de Métallurgie 97, no. 7-8 (2000): 905–12. http://dx.doi.org/10.1051/metal/200097070905.

Full text

APA, Harvard, Vancouver, ISO, and other styles

20

de Pádua Lima Filho, Antonio, Márcio Iuji Yamasaki, Leandro Akita Ono, Lourenço Nampo, and Alcides Padilha. "A Comparison of Deep Drawing and Ironing of Metal Alloy Strip Produced Conventionally and Non-Conventionally via Semi Solid Material Processing." Solid State Phenomena 141-143 (July 2008): 49–54. http://dx.doi.org/10.4028/www.scientific.net/ssp.141-143.49.

Full text

Abstract:

A semi solid thin strip continuous casting process was used to obtain 50%wt Pb/50%wtSn strip by single and twin roll processing at speed of 15 m/min. A 50%wt Pb/50%wtSn plate ingot was also cast for rolling conventionally into strips of 1.4 mm thickness and 45 mm width for comparison with those achieved non-conventionally. This hypoeutectic alloy has a solidification interval and fusion temperature of approximately 31°C and 215°C respectively. The casting alloy temperature was around 280°C as measured by a type K immersion thermocouple prior to pouring into a tundish designed to maintain a con

APA, Harvard, Vancouver, ISO, and other styles

21

Merklein, Marion, Tommaso Stellin, and Ulf Engel. "Experimental Study of a Full Forward Extrusion Process from Metal Strip." Key Engineering Materials 504-506 (February 2012): 587–92. http://dx.doi.org/10.4028/www.scientific.net/kem.504-506.587.

Full text

Abstract:

A high rate of production of complex microparts is increasingly required by fields like electronics and micromechanics. Handling is one of the main problems, limiting those forming processes of small metal components consisting of multiple forming stages. A forming chain in which a metal strip acts both as raw material and support of the workpiece through the different stages of the process, is seen as a solution that radically simplifies the positioning of microparts. Each workpiece stays connected to the strip through all the forming steps, being separated just at the end of the process chai

APA, Harvard, Vancouver, ISO, and other styles

22

Zhou, Cheng, De Wang, Deng Chao Luo, et al. "Study on Rapid Solidification of Metal Strips." Advanced Materials Research 838-841 (November 2013): 69–75. http://dx.doi.org/10.4028/www.scientific.net/amr.838-841.69.

Full text

Abstract:

Aim to produce metal strips in millimeter scale, the Top Side-pouring Single Roll Casting process and the Top Side-pouring Twin Roll Casting process were investigated in this paper, using commercially pure lead and commercial-purity aluminum as the experimental materials. Numerical simulation was conducted before the experiment. The results show that, the Top Side-pouring Single Roll Casting process and the Top Side-pouring Twin Roll Casting process can both realize the uniform flow distribution and rapid solidification, but the surface of the strips cast by the former are irregularity because

APA, Harvard, Vancouver, ISO, and other styles

23

Wang, Zhi Hui. "Investigation of Terahertz Wave Propagation along Symmetric Coplanar Strpline on Multilayer Dielctric Substrates." Materials Science Forum 1064 (June 17, 2022): 165–74. http://dx.doi.org/10.4028/p-6x99d7.

Full text

Abstract:

Characteristics of the symmetric coplanar strip line on multi-layer dielectric substrates expressed in analytic formulas have been obtained using conformal mapping. But in most previous presented papers, the metal strip is considered as infinitely thin or PEC while the influence of dielectric substrates are not considered. In this paper, the propagation characteristics of symmetric coplanar strip line with finite conductivity and finite metal strip thickness on multilayer substrates are analyzed by conformal mapping at THz regions. The influences of metal strips and dielectric substrates on th

APA, Harvard, Vancouver, ISO, and other styles

24

Biallas, Alina, Sophia Ohmayer, and Marion Merklein. "Fundamental Investigations to Evaluate the Influence of Notching Processes on a Subsequent Cyclic Bending Process for the Production of Wire Cores." Journal of Manufacturing and Materials Processing 7, no. 1 (2023): 24. http://dx.doi.org/10.3390/jmmp7010024.

Full text

Abstract:

The production of wire cores by notch rolling and cyclic bending promises an ecologically and economically efficient manufacturing option for steel fibers. The paper at hand evaluates the influence of wire strips on cyclic bending by applying rolled wire strips of DP600 sheet metal (t0 = 0.8 mm) and a new cyclic bending testing tool. Analysis of material separation with varying parameters, rolling gap d and bending angle β, proves the interdependency of both process step, but indicates reduced adjustability of the notch rolling process. To enable better adjustability of the wire strip’s charac

APA, Harvard, Vancouver, ISO, and other styles

25

Pleschiutschnigg, F. P., B. Kruger, P. Meyer, G. Gosio, U. Siegers, and H. G. Gusgen. "The I.S.P. technology, short production line for hot strips and plates." Revue de Métallurgie 89, no. 6 (1992): 547–62. http://dx.doi.org/10.1051/metal/199289060547.

Full text

APA, Harvard, Vancouver, ISO, and other styles

26

Bordignon, L., X. Vanden Eynde, and R. Franssen. "Quality improvement of the galvanized strips by the oxidation / reduction process." Revue de Métallurgie 101, no. 7-8 (2004): 559–68. http://dx.doi.org/10.1051/metal:2004124.

Full text

APA, Harvard, Vancouver, ISO, and other styles

27

Pástor, Miroslav, and Pavol Lengvarský. "Analysis of stress and deformation fields of shape complex beams." MATEC Web of Conferences 157 (2018): 02037. http://dx.doi.org/10.1051/matecconf/201815702037.

Full text

Abstract:

In this paper is investigated the analysis of stress and deformation fields of shape complex beams. The shape complex beams are made from load-bearing sheet (trapezoidal sheet) circumferentially connected with strips of sheet metal, these beams are a substitute for more complex and heavier beams. The numerical analysis with static load are performed for these beams. The effect of three different types of connections between load-bearing sheet and strips of sheet metal is investigated. The first type of connection is represented by the trapezoidal sheet perfectly welded to the strips of sheet m

APA, Harvard, Vancouver, ISO, and other styles

28

Vidoni, Michele, Markus Daamen, and Gerhard Hirt. "Numerical and Experimental Investigation of a Modified Twin Roll Strip Casting Process for the Production of Clad Steel Strips." Key Engineering Materials 651-653 (July 2015): 689–94. http://dx.doi.org/10.4028/www.scientific.net/kem.651-653.689.

Full text

Abstract:

A process for the production of clad steel strips by means of vertical twin-roll strip casting is under investigation at the Institute of Metal Forming (IBF). This production concept is based on the introduction of a solid strip in the casting pool in order to join it with the solidifying melt. The advantages of this concept are a shorter process chain and a higher energy efficiency compared to the existing cladding methods. The contact time and the thickness ratio between solid strip and solidifying melt, their relative position and the alloy combination are fundamental parameters to be consi

APA, Harvard, Vancouver, ISO, and other styles

29

Legrand, N., B. Becker, and C. Roubin. "Towards a better width control in cold rolling of flat steel strips." Revue de Métallurgie 103, no. 7-8 (2006): 326–32. http://dx.doi.org/10.1051/metal:2006133.

Full text

APA, Harvard, Vancouver, ISO, and other styles

30

Тараненко, І. М. "ВАРІАНТИ ВИКОРИСТАННЯ ВЛАСТИВОСТІ УНІФІКАЦІЇ ПРИ ВИБОРІ КОНСТРУКТИВНО-ТЕХНОЛОГІЧНИХ РІШЕНЬ З’ЄДНАНЬ “МЕТАЛ+КОМПОЗИТ”". Open Information and Computer Integrated Technologies, № 98 (15 квітня 2024): 58–68. http://dx.doi.org/10.32620/oikit.2023.98.05.

Full text

Abstract:

Possibility of unification property realization in application to variants of structural-technological solutions of “metal+composite” joints.It is drawn that this property is important for up-today vehicle engineering structures at different goals of its manufacturing. It is shown that there are three possible options can be revealed in metal-composite heterogenous joints realization: with monolithic, cylindrical and sheet transversal fastening connections.Possibility of application sheet transversal fastening elements produced on metal strips is considered exactly. Also, possibility of implem

APA, Harvard, Vancouver, ISO, and other styles

31

Nan, Alexandrina, Rodica Turcu, Cristian Tudoran, Mihaela Sofronie, and Alexandru Chiriac. "Analysis of Functionalized Ferromagnetic Memory Alloys from the Perspective of Developing a Medical Vascular Implant." Polymers 14, no. 7 (2022): 1397. http://dx.doi.org/10.3390/polym14071397.

Full text

Abstract:

Durable biocompatible metal vascular implants are still one of the significant challenges of contemporary medicine. This work presents the preparation of ferromagnetic biomaterials with shape memory in metal strips based on FePd (30 at% Pd) that is either not doped or doped with Ga and Mn, coated with poly(benzofuran-co-arylacetic acid) or polyglutamic acid. The coating of the metal strips with polymers was achieved after the metal surface had been previously treated with open-air cold plasma. The final functionalization was performed to induce anti-thrombogenic/thrombolytic properties in the

APA, Harvard, Vancouver, ISO, and other styles

32

Ibrahim, Osama Ragab, Mazoun Al Sinani, Israa Al Sinani, Bayan Al Shibli, Amjaad Al Badi, and Salma Al Maghawry. "Effects of Metal Waste Strips on Strength Characteristics of Road Base Material." Sustainability 15, no. 12 (2023): 9824. http://dx.doi.org/10.3390/su15129824.

Full text

Abstract:

Metal manufacturing produces various types of byproducts and metal waste that have been growing exponentially. The increasing amounts of metal waste are usually disposed of in landfills, which causes soil and water pollution and increases the amount of gas emissions. On the other hand, in the field of pavement construction, the demand for natural materials is increasing rather rapidly. Many studies have suggested utilizing aggregate-like waste material in pavement construction, but there is little to no literature documenting the use of metal strips of different types. The aim of this study is

APA, Harvard, Vancouver, ISO, and other styles

33

Kiya, S., T. Kojima, Y. Hyugaji, and Y. Hayashi. "Development of a fast annealing pickling technology for cold rolled stainless steel strips." Revue de Métallurgie 93, no. 11 (1996): 1431–36. http://dx.doi.org/10.1051/metal/199693111431.

Full text

APA, Harvard, Vancouver, ISO, and other styles

34

Miazga, Beata, Dawid Grupa, and Małgorzata Grupa. "Results of Archaeometrical Studies on a Kontush Sash from Piaseczno (Pomorskie Province, Poland)." Analecta Archaeologica Ressoviensia 18 (December 29, 2023): 205–15. http://dx.doi.org/10.15584/anarres.2023.18.13.

Full text

Abstract:

Archaeometric studies on silk thread wound around with metal strips are still rarely undertaken in Poland. Their popularization seems to be necessary, however, as there are many problems to solve. In the case of a kontush sash manufactured in Gdańsk as archaeological finds, the main question is whether they used metal strips prepared by local craftsmen, what raw material was employed, and what methods of gilding were implemented. Only future regular studies and analyses can answer these questions. The article presents the results of tests on metal strips wound around silk threads coming from a

APA, Harvard, Vancouver, ISO, and other styles

35

Yu Kuznetsov, N., K. S. Grigoriev, and V. A. Makarov. "Topological features of polarization ellipse strips built on non-planar contours in the light scattered on a metal nanospheroid." Laser Physics Letters 20, no. 8 (2023): 085401. http://dx.doi.org/10.1088/1612-202x/acde72.

Full text

Abstract:

Abstract Topological properties of optical strips of the vectors determining the polarization ellipse orientation which are constructed on non-planar contours were studied for the electric field reflected from a gold particle of ellipsoidal shape while irradiated by a plane monochromatic wave. The twisting of each optical strip traced near the particle can be characterised by the sum of the intrinsic twist index of the strip and writhe and full geometric torsion coefficients of the bypass contour. It is shown that the intrinsic twist index generally does not exceed half the linking number of t

APA, Harvard, Vancouver, ISO, and other styles

36

Reddy, A. R., and S. K. Lahiri. "Surface Wave Reflection from Metal-Strips and Transducers." IETE Journal of Research 33, no. 2 (1987): 57–62. http://dx.doi.org/10.1080/03772063.1987.11436661.

Full text

APA, Harvard, Vancouver, ISO, and other styles

37

Azuma, D., and R. Hasegawa. "Remote Temperature Sensor Based on Amorphous Metal Strips." IEEE Transactions on Magnetics 45, no. 10 (2009): 4503–5. http://dx.doi.org/10.1109/tmag.2009.2023611.

Full text

APA, Harvard, Vancouver, ISO, and other styles

38

Kang, D., and Y. Sung. "Dual-Mode Patch Filter with Metal Wall Structures." International Journal of Antennas and Propagation 2013 (2013): 1–4. http://dx.doi.org/10.1155/2013/576898.

Full text

Abstract:

A dual-mode patch filter with metal wall structures is presented. The proposed structure consists of substrate 1 with metal wall structures and substrate 2 with a patch resonator. Because the symmetry of the structure can be perturbed by both long and short strips of the metal wall structures, the dual mode is achieved. The inductive element is introduced to the patch resonator through vias of the metal wall structures. The capacitive element is introduced through a gap between the patch resonator and the metal strips. The measured 3 dB fractional bandwidth for the passband is 10.4%, and the m

APA, Harvard, Vancouver, ISO, and other styles

39

Lin, Shengcun, Wenxiu Feng, and Fusheng Shi. "Composite manufacturing of metal porous thin strip with metal wire mesh and powder." Journal of Physics: Conference Series 2730, no. 1 (2024): 012011. http://dx.doi.org/10.1088/1742-6596/2730/1/012011.

Full text

Abstract:

Abstract Porous metal materials are applied in various industries, among which powder rolling is the most widely used process for preparing porous metal materials. Then, metal porous materials prepared solely from powder as raw materials have the disadvantage of low mechanical properties, while wire mesh as reinforcement can effectively improve tensile strength. The preparation process of wire mesh powder composite is complex and requires the addition of adhesives. In this article, the mechanical properties of thin metal strips prepared by powder and wire mesh composite vertical rolling were m

APA, Harvard, Vancouver, ISO, and other styles

40

Birol, Yucel. "Processing of twin-roll cast thin AlFeSi strips for the manufacture of aluminium finstock." Metallurgical Research & Technology 114, no. 2 (2017): 202. http://dx.doi.org/10.1051/metal/2017008.

Full text

APA, Harvard, Vancouver, ISO, and other styles

41

Larnicol, M., J. Crahay, and M. Renard. "Rapid heating of low carbon steel strips by impinging burners: recent developments and synthesis." Revue de Métallurgie 102, no. 5 (2005): 379–84. http://dx.doi.org/10.1051/metal:2005122.

Full text

APA, Harvard, Vancouver, ISO, and other styles

42

Qiao, Jiabin, and Ding Zhang. "Extension of on-chip thermometry of metal strips toward sub-10 K regime." Applied Physics Letters 120, no. 17 (2022): 173507. http://dx.doi.org/10.1063/5.0086691.

Full text

Abstract:

One widely employed method to study thermoelectric effects in nano- and mesoscopic systems is by utilizing on-chip metal strips. However, the standard technique loses sensitivity in the sub-Kelvin temperature regime because the resistance of metal strips saturates. Here, we report a possible solution that can extend the working point from the conventional window (10 to 300 K) down to temperatures below 10 K. This method takes advantage of the unexpected resistance up-turn at T < 10 K in gold strips, presumably due to the Kondo effect. As a demonstration, we apply this technique to study a N

APA, Harvard, Vancouver, ISO, and other styles

43

Lekhov, O. S., A. V. Mikhalev, and M. M. Shevelev. "Production of three-layer steel bimetallic strips in the unit of continuous casting and deformation. Report 1." Izvestiya. Ferrous Metallurgy 62, no. 8 (2019): 594–99. http://dx.doi.org/10.17073/0368-0797-2019-8-594-599.

Full text

Abstract:

High technical and economic efficiency of the use of bimetals in chemical, oil, transport and energy engineering and other industries is described. The urgency of creating high-performance continuous processes for the production of bimetallic strips is substantiated. The authors have established the main technological tasks for development of the processes of obtaining bimetal of wide class. The paper describes resource-saving production technology of three-layer bimetals alloyed steel – constructional steel – alloyed steel at the unit of combined process of continuous casting and deformation.

APA, Harvard, Vancouver, ISO, and other styles

44

D'Armiento, F., L. Dierick, S. Lecomte, V. Lhoist, and B. Simon. "Two years of operation of TWICE on the C.A.L. for cold rolled strips of Kessales." Revue de Métallurgie 102, no. 10 (2005): 711–19. http://dx.doi.org/10.1051/metal:2005109.

Full text

APA, Harvard, Vancouver, ISO, and other styles

45

Lekhov, O. S., A. V. Mikhalev, and M. M. Shevelev. "PRODUCTION OF THREE-LAYER STEEL BIMETALLIC STRIPS IN THE UNIT OF CONTINUOUS CASTING AND DEFORMATION. REPORT 2." Izvestiya. Ferrous Metallurgy 62, no. 10 (2019): 763–68. http://dx.doi.org/10.17073/0368-0797-2019-10-763-768.

Full text

Abstract:

The paper states urgency of the problem of determining stressstrain state of metals of the cladding layer and the main strip in production of three-layer bimetal: alloyed steel-constructional steelalloyed steel. Temperature field of the main strip and cladding layer is given to calculate stress-strain state of metals of three-layer bimetallic strip. Initial data for calculating this stress-strain state are given. To assess the effect of coefficient of friction between cladding layer s and the main strip on stress-strain state of metals in deformation zone, three values of it are taken. Geometr

APA, Harvard, Vancouver, ISO, and other styles

46

Konovodov, D., and V. Nakonechnyi. "AN EXPERIMENTAL INVESTIGATION OF BEHAVIOR OF ALUMINUM AND MAGNESIUM LAYERS DURING THE ROLLING OF THREE-LAYER STRIPS." Modern Problems of Metalurgy, no. 26 (April 23, 2023): 52–60. https://doi.org/10.34185/1991-7848.2023.01.05.

Full text

Abstract:

Modern magnesium alloys have prospects for wide application in the automotive and aerospace industries, where the maximum weight reduction of the structure is of great importance. These alloys have a sufficiently high specific strength. But the magnesium alloys that are used are prone to corrosion, which limits their use. One of the options for increasing corrosion resistance is the use of magnesium alloy strips inside three-layer strips, the outer layers of which consist of strips of another metal or alloy. The non-uniformity of the deformation of the strip during rolling affects the formatio

APA, Harvard, Vancouver, ISO, and other styles

47

Gao, Yuan, Fahima Shaon, Aditya Kumar, et al. "Rapid frontal polymerization achieved with thermally conductive metal strips." Chaos: An Interdisciplinary Journal of Nonlinear Science 31, no. 7 (2021): 073113. http://dx.doi.org/10.1063/5.0052821.

Full text

APA, Harvard, Vancouver, ISO, and other styles

48

Avdeenko, Anatoly, Vladimir Fedorynov, Predrag Dašić, et al. "Cold Rolling of Steel Strips with Metal-Working Coolants." Machines 6, no. 3 (2018): 29. http://dx.doi.org/10.3390/machines6030029.

Full text

APA, Harvard, Vancouver, ISO, and other styles

49

Nardinocchi, Paola, and Matteo Pezzulla. "Curled actuated shapes of ionic polymer metal composites strips." Journal of Applied Physics 113, no. 22 (2013): 224906. http://dx.doi.org/10.1063/1.4810919.

Full text

APA, Harvard, Vancouver, ISO, and other styles

50

Weeber, J. C., M. U. González, A. L. Baudrion, and A. Dereux. "Surface plasmon routing along right angle bent metal strips." Applied Physics Letters 87, no. 22 (2005): 221101. http://dx.doi.org/10.1063/1.2130393.

Full text

APA, Harvard, Vancouver, ISO, and other styles

We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!