Relevant bibliographies by topics / Minimum displacement factor

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Book chapters
  4. Conference papers

Academic literature on the topic 'Minimum displacement factor'

Author: Grafiati
Published: 3 June 2025
Last updated: 31 July 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Minimum displacement factor.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Minimum displacement factor"

1

R, Murugesan*1 Dr M. Vijayaraj2 &. Dr. K. Vetrivel. "MULTI ATTRIBUTE MINIMUM THROTTLE APPROXIMATION BASED SINKHOLE DETECTION IN MOBILE ADHOC NETWORKS." INTERNATIONAL JOURNAL OF ENGINEERING SCIENCES & RESEARCH TECHNOLOGY 6, no. 6 (2017): 455–63. https://doi.org/10.5281/zenodo.814697.

Full text
Abstract:
The presence of sinkhole attack in mobile adhoc network affects the quality of service of the network and the problem of mitigating sinkhole attack has been handled with different strategies. Still the methods suffers to achieve the mitigation performance and to overcome this issue, an efficient multi attribute minimum throttle approximation algorithm is presented in this paper. The method performs mitigation of sink hole attacks in distributed manner which improves the quality of service of the network. Each node maintains the trace about node energy, node location, displacement speed, and nu
APA, Harvard, Vancouver, ISO, and other styles
2

Li, Liping, Jinpeng Wu, Yishan Pan, and Jupeng Tang. "Influencing Factor Analysis on the Anomalously Low-Friction Effect in the Block Rock Mass." Advances in Civil Engineering 2020 (September 18, 2020): 1–12. http://dx.doi.org/10.1155/2020/8831486.

Full text
Abstract:
According to the instability failure of the deep rock mass, a superposition block model of anomalously low-friction effect was established. The numerical results were compared with the previous experiment, which verifies the feasibility and effectiveness of the simulation. A vertical impact and confining pressure were applied to the superimposed block model, and a horizontal static force was applied to the working block (the third block). This study aimed to determine the influence rules of vertical impact energy, confining pressure, and block lithology on the horizontal displacement of the wo
APA, Harvard, Vancouver, ISO, and other styles
3

Tanjung, Faizal, Shinta Tri Kismanti, and Muhammad Firdan Nurdin. "Analisis Konstruksi Rancang Bangun Mesin Uji Universal Menggunakan Sistem Komputasi." Journal BEARINGS: Borneo Mechanical Engineering and Science 2, no. 1 (2023): 15–26. https://doi.org/10.35334/bearings.v2i1.3223.

Full text
Abstract:
Tujuan dari penelitian ini adalah untuk merancang mesin uji universal dan menganalisis kekuatan konstruksi mesin uji universal sebelum dilakukan pengujian, untuk merancang dan menganalisis kekuatan konstruksi menggunakan software solidworks dan fitur simulasi, dimana dalam fitur ini akan diamati proses keluaran untuk hasil von misses stress, strain, displacement dan safety factor. Dalam penelitian ini dilakukan variasi pembebanan 100 kg, 200 kg dan 300 kg di titik tempat pengujian rangka konstruksi. Hasil dari penelitian ini didapatkan untuk nilai terbesar pengujian tarik untuk beban maksimal
APA, Harvard, Vancouver, ISO, and other styles
4

Anwar, Achmad Zainul, I. Putu Shindu Asmara, Dhika Aditya Purnomo, and Saiful Arif. "FLOOR CRANE STRUCTURE DESIGN AS A TOOL FOR REPLACING BATTERY PACKS ON TMII TRAM MOVER." JISO : Journal of Industrial and Systems Optimization 7, no. 1 (2024): 8–15. http://dx.doi.org/10.51804/jiso.v7i1.8-15.

Full text
Abstract:
Tram mover is a train made by PT INKA (Persero) as one of the rides at TMII (Taman Mini Indonesia Indah) which uses batteries as an energy source. In the battery replacement process still uses manual lifting by requiring 4 workers. Each tram mover has 2 battery packs, requiring 4 lifts in each replacement process. There is no floor crane product on the market that can be used as a replacement tool in TMII station conditions. In this research, the design of tools for battery pack replacement is carried out. A floor crane with capacity, strength, and dimensions adapted to the conditions at TMII
APA, Harvard, Vancouver, ISO, and other styles
5

Kwak, Sangshin. "Indirect matrix converter drives for unity displacement factor and minimum switching losses." Electric Power Systems Research 77, no. 5-6 (2007): 447–54. http://dx.doi.org/10.1016/j.epsr.2006.04.012.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Zhou, Aizhao, Chengchao Li, Pengming Jiang, Kai Yao, Na Li, and Wei Wang. "Slip Line Theory Based Stability Analysis on the Influence of Deep Excavation on Adjacent Slope." Mathematical Problems in Engineering 2018 (June 24, 2018): 1–7. http://dx.doi.org/10.1155/2018/2041712.

Full text
Abstract:
The impact of deep excavation to the stability of adjacent slope is evaluated based on the slip line theory. Stress field of slope under various excavation conditions is simulated by finite element method, while slip line field is determined by non-associated flow rule. Factor of safety is obtained by integrating the skid-resistance and the shear stress on each slip line, and the slip line with minimum factor of safety corresponds to the critical slip surface. Two typical displacement constraint boundaries are considered. The results indicate that the critical slip surface moves towards to the
APA, Harvard, Vancouver, ISO, and other styles
7

Tang, Xiu Jian, Xin Li Tian, Bao Guo Zhang, and Keling Lin Lin. "Study on the Relationships between Edge Distance and the Failure Process of Edge Chipping for Engineering Ceramics." Advanced Materials Research 314-316 (August 2011): 904–8. http://dx.doi.org/10.4028/www.scientific.net/amr.314-316.904.

Full text
Abstract:
Edge distance is the main factor inducing edge chipping. An edge chipping experiment is designed to study the relationships between edge distance and the edge chipping from the aspect of fracture process, the load-displacement curves and AE signals are documented. The results show that the fracture processes of edge chipping at different edge distances are similar and could be divided into four stages, AE signals could reflect the fracture process features of edge chipping. As edge distance increases, the displacements of indenter and critical loads would increase correspondingly, while the pe
APA, Harvard, Vancouver, ISO, and other styles
8

Nie, Wei Ping, and Chong Shi. "Study on Dynamic Stability of Large-Scale Underground Cavern Group during Construction Period of Hydropower Station." Applied Mechanics and Materials 152-154 (January 2012): 820–25. http://dx.doi.org/10.4028/www.scientific.net/amm.152-154.820.

Full text
Abstract:
Taking excavation and supporting of surge tank large-scale underground cavern group of Nuozhadu hydropower station as example, the stability of surrounding rock is analyzed systematically, and the best lining scheme is obtained. Through primary supporting calculation, the displacement and the small main stress increases continuously with excavation of cavern; the rock-point safety factor of decreases continuously with excavation of cavern; the displacement, the small main stress and the rock-point safety factor soon changed when the surrounding rock unloaded suddenly, therefore, the surroundin
APA, Harvard, Vancouver, ISO, and other styles
9

Amir, Amir, Fathan Mubina Dewadi, Muchammad Chusnan Aprianto, et al. "Effect of Material Type and Design on Hook Crane Performance: Stress, Deformation, and Safety Factor Analysis." Engineering and Technology International Journal 6, no. 02 (2024): 114–28. https://doi.org/10.55642/eatij.v6i02.827.

Full text
Abstract:
This simulation aims to evaluate the stress, deformation, and strain values of the crane hook structure to ensure safe load handling and prevent functional failure. In this study, AISI 1015, AISI 1035, and alloy steel casing materials were tested, along with two different hook designs: trapezoidal and circular. The trapezoidal design had base dimensions of 34.50 mm and 58.00 mm, with a top surface area of 55.00 mm and a radius of 10.00 mm. The circular design has a diameter of 58.00 mm. Simulations were carried out using SolidWorks on AISI 1015 with Mass 10 tons, stress 279.68 N/mm², displacem
APA, Harvard, Vancouver, ISO, and other styles
10

Anggrainy, Rani, Zulfiati Syahrizal, Hesti Hermawati, et al. "Optimalisasi Desain Sasis Gokart: Simulasi dan Analisis Struktur Dengan Pembebanan Statis." Jurnal Permadi : Perancangan, Manufaktur, Material dan Energi 6, no. 02 (2024): 191–97. http://dx.doi.org/10.52005/permadi.v6i02.153.

Full text
Abstract:
The go-kart chassis serves as an important structural component that ensures stability, strength, and safety during operation. This research focuses on the design and structural optimization of a go-kart chassis made from S45C steel material. The chassis design is modeled using Autodesk Inventor 2024, with particular attention given to material selection, weight reduction, and stiffness to improve overall performance. The aim of this research is to design a go-kart chassis using static load simulation. In the static load analysis, data on stress distribution, displacement, and safety factor ca
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Minimum displacement factor"

1

Bónová, Kateřina. "Výpočet dráhy trhliny podle lineární lomové mechaniky." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2018. http://www.nusl.cz/ntk/nusl-371865.

Full text
Abstract:
This diploma thesis deals with the different possible calculations of crack path. Specifically, it focuses on criteria based on maximum tangential stress, minimal strain energy density, crack tip displacement, and local symmetry. These criteria are used for calculations in ANSYS software to estimate possible crack paths on four simple structures. The thesis also contains the codes created in ANSYS. Using these, the crack trajectory of a given structure can be calculated by any of the four criteria described.
APA, Harvard, Vancouver, ISO, and other styles

Book chapters on the topic "Minimum displacement factor"

1

Huntley, David, Drew Rotheram-Clarke, Kelvin Sattler, and David Elwood. "Surficial Geology and Geomorphology of the North Slide, Thompson River Valley, British Columbia, Canada: Application of Fundamental Geoscience Information to Interpretations of Geospatial Monitoring Results." In Progress in Landslide Research and Technology. Springer Nature Switzerland, 2023. http://dx.doi.org/10.1007/978-3-031-44296-4_10.

Full text
Abstract:
AbstractOur study focuses on a slow-moving landslide in the Thompson River valley, south-central British Columbia, Canada, that has posed a hazard to the national railway transportation corridor since 1880. Real-time kinematic global navigation satellite systems, unoccupied aerial vehicles, and satellite synthetic aperture radar interferometry time-series show significant displacement encroaching on railway infrastructure. In this paper, geospatial relationships between landslide distribution and specific terrain features, and the environmental conditions triggering instability are determined
APA, Harvard, Vancouver, ISO, and other styles
2

Gonzalo A. Herbas Pizarro, Julio. "Minimum Miscibility Pressure, Miscible Displacement, CO2 Capture, and Injection." In Enhanced Oil Recovery - Selected Topics [Working Title]. IntechOpen, 2022. http://dx.doi.org/10.5772/intechopen.106945.

Full text
Abstract:
The Minimum Miscibility Displacement Pressure, and the strategies to maintain the reservoir pressure above the minimum miscibility pressure are the most important elements for a successful EOR Dry Gas, CO2, or N2 Miscible injection project. The Miscibility behaviour needs to be understood early after the reservoir discovery to establish if a miscible displacement is economically attractive. The difference of a miscible gas displacement with an immiscible displacement is of such importance because a miscible displacement could achieve a recovery factor as high as 75% to 90% of the contacted oil
APA, Harvard, Vancouver, ISO, and other styles
3

Ataullahjan, Anushka, Michelle F. Gaffey, Paul B. Spiegel, and Zulfiqar A. Bhutta. "The health impacts of displacement due to conflict on adolescents." In The Health of Refugees. Oxford University Press, 2019. http://dx.doi.org/10.1093/oso/9780198814733.003.0010.

Full text
Abstract:
Globally, it is estimated there are a minimum of 9.8 million forcibly displaced adolescents (10–19 years old). Forcibly displaced adolescents face difficulties obtaining health services with conflict disrupting care, aggravating existing health concerns, and introducing new health issues. Displaced adolescents experience increased injury, psychological trauma, nutritional deficiencies, and physical and sexual violence. This chapter describes the health impact of conflict, and several factors that exacerbate the health of adolescents. It then describes the evidence base on the most effective in
APA, Harvard, Vancouver, ISO, and other styles
4

Wolf, Helene, Johannes Böhm, Matthias Schartner, Urs Hugentobler, Benedikt Soja, and Axel Nothnagel. "Dilution of Precision (DOP) Factors for Evaluating Observations to Galileo Satellites with VLBI." In International Association of Geodesy Symposia. Springer Berlin Heidelberg, 2022. http://dx.doi.org/10.1007/1345_2022_165.

Full text
Abstract:
AbstractInstalling a VLBI transmitter on Galileo satellites will allow observing satellites in parallel to quasars with Very Long Baseline Interferometry (VLBI) telescopes. This offers a variety of new applications such as the direct determination of the absolute orientation of the satellite constellation with respect to the International Celestial Reference Frame (ICRF) and the improvement of the Terrestrial Reference Frame (TRF) exploiting the possibilities of direct high precision tying of the different space geodetic equipment. In preparation of these observations by enhancing the capabili
APA, Harvard, Vancouver, ISO, and other styles
5

Justo J.L., Morales-Esteban A., Durand P., Vázquez N., and Justo E. "Dynamic analysis of San Pedro Cliff at La Alhambra." In Proceedings of the 15th European Conference on Soil Mechanics and Geotechnical Engineering. IOS Press, 2011. https://doi.org/10.3233/978-1-60750-801-4-1853.

Full text
Abstract:
San Pedro Cliff is a dihedral 65.5m high, which has progressed to place itself at a distance of 23.8m from the Alhambra palace that is a World Heritage Site. The western part of the Cliff is a fault-line scarp, modified by river erosion and latterly by successive slab falls. Pseudostatic stability analyses suggest that the factor of safety of this slope under 1000-yr-return-period earthquake loading may drop below 1.0 and the critical slip surface could penetrate the Alhambra walls. To raise the safety factor up to values above 1.0 and to counteract extensional regime in the cliff, a solution
APA, Harvard, Vancouver, ISO, and other styles
6

Odowa, Abdullahi. "Traditional Peacemaking in Sanaag Region, Somaliland." In War and Peace in Somalia. Oxford University Press, 2019. http://dx.doi.org/10.1093/oso/9780190947910.003.0011.

Full text
Abstract:
This chapter describes the role of traditional peacemaking in the Sanaag region of Somaliland. The civil war in Somaliland spawned devastating inter‐ and intra-clan violence and political power struggles which caused the death and displacement of thousands. Over several years, peace initiatives were led by clan elders and community leaders, using xeer. The initiatives were largely successful because of the political will to make them succeed and the spirit of reconciliation; the way they worked upwards from grassroots level, and the fact that they were locally funded, with minimal government i
APA, Harvard, Vancouver, ISO, and other styles
7

Dhamija, Sana, Suprakash Chaudhury, and Chetan Diwan. "IMPACT OF COVID 19 PANDEMIC ON WOMEN." In Futuristic Trends in Social Sciences Volume 3 Book 24. Iterative International Publishers, Selfypage Developers Pvt Ltd, 2024. http://dx.doi.org/10.58532/v3bdso24p3ch6.

Full text
Abstract:
COVID 19 pandemic shook the world upon its onset in 2019. It had a drastic and lasting psychological impact on each section of the population. It led to the development of various mental health effects like anxiety, depression, panic, PTSD and caused widespread suffering. It had a significant social, economic and psychological effect on women as well. At the work front, women working in informal jobs became unemployed, lost daily wages and suffered economic hardships. Those working in skilled jobs had to suffer from massive layovers and loss of income. At home women had to constantly indulge i
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Minimum displacement factor"

1

Mogensen, Kristian, and Sergey Goryachev. "First-Contact Miscibility Development in a High-Temperature, Ultra-Sour Reservoir Fluid System Offshore Abu Dhabi." In ADIPEC. SPE, 2022. http://dx.doi.org/10.2118/211441-ms.

Full text
Abstract:
Abstract First-contact miscibility (FCM) occurs when an original injection gas is miscible with a reservoir oil regardless of the mixing ratio. As a consequence, the displacement will remain single-phase and the microscopic displacement efficiency will be 100%. For the vast majority of field applications, FCM requires a pressure, which is prohibitively high. Some notable exceptions include ultra-sour fluids, such as the fluid system encountered in this reservoir, offshore Abu Dhabi. The exceptionally favorable miscibility conditions may help unlock further value from this challenging, ultra-so
APA, Harvard, Vancouver, ISO, and other styles
2

Vorraro, Giovanni, and James Turner. "An Investigation into the Surface Area-to-Volume Ratio of Wankel Rotary Engines and how it Affects Heat Transfer and Heat Losses within them." In WCX SAE World Congress Experience. SAE International, 2025. https://doi.org/10.4271/2025-01-8357.

Full text
Abstract:
<div class="section abstract"><div class="htmlview paragraph">Wankel rotary engines are renowned for having lower efficiency than classic reciprocating engines. One of the factors affecting the efficiency is an unfavourable surface area-to-volume ratio given by the particular geometry of the engine, which increases the heat loss during the combustion phase. A novel and specific study on this aspect was carried out in this work by implementing a general parametric routine in Octave/Matlab. It was able to compute the surface area-to-volume ratio and execute a sensitivity analysis on
APA, Harvard, Vancouver, ISO, and other styles
3

Achten, Peter, Robin Mommers, Takao Nishiumi, et al. "Measuring the Losses of Hydrostatic Pumps and Motors: A Critical Review of ISO4409:2007." In ASME/BATH 2019 Symposium on Fluid Power and Motion Control. American Society of Mechanical Engineers, 2019. http://dx.doi.org/10.1115/fpmc2019-1615.

Full text
Abstract:
Abstract ISO 4409 is the most important international standard for measuring the efficiency of hydraulic pumps and motors, the latest edition being 4409:2007. The standard describes methods for determining the steady-state performance in terms of overall efficiency. It also defines equations for calculating the volumetric efficiency of pumps and motors. The hydro-mechanical efficiency is only defined for motors, not for pumps. This paper analyses the efficiency and losses of pumps and motors in an alternative way. The preference is on loss analysis instead of efficiencies. Especially the effec
APA, Harvard, Vancouver, ISO, and other styles
4

Masalmeh, S. K., S. A. Farzaneh, M. Sohrabi, and M. AlHammadi. "Effect of Pressure, Initial Water Saturation, Rock Type and Injection Rate on Oil Recovery and Displacement Efficiency of CO2 Injection in Carbonate Reservoirs." In SPE Improved Oil Recovery Conference. SPE, 2024. http://dx.doi.org/10.2118/218199-ms.

Full text
Abstract:
Abstract Miscible gas injection is the most widely applied enhanced oil recovery (EOR) method in light oil carbonate reservoirs, both as tertiary and secondary method. Miscible gas has high displacement efficiency and usually results in a low residual oil saturation (Sorm) in the part of the reservoirs that is contacted with gas. Accurate determination of Sorm and understanding the parameters that affect displacement efficiency are crucial for successful miscible gas EOR projects. This paper presents a comprehensive experimental program designed to investigate the effect of experimental pressu
APA, Harvard, Vancouver, ISO, and other styles
5

Masalmeh, S. K., S. A. Farzaneh, M. Sohrabi, and M. AlHammadi. "Effect of Pressure, Initial Water Saturation, Rock Type and Injection Rate on Oil Recovery and Displacement Efficiency of CO2 Injection in Carbonate Reservoirs." In SPE Conference at Oman Petroleum & Energy Show. SPE, 2024. http://dx.doi.org/10.2118/218525-ms.

Full text
Abstract:
Abstract Miscible gas injection is the most widely applied enhanced oil recovery (EOR) method in light oil carbonate reservoirs, both as tertiary and secondary method. Miscible gas has high displacement efficiency and usually results in a low residual oil saturation (Sorm) in the part of the reservoirs that is contacted with gas. Accurate determination of Sorm and understanding the parameters that affect displacement efficiency are crucial for successful miscible gas EOR projects. This paper presents a comprehensive experimental program designed to investigate the effect of experimental pressu
APA, Harvard, Vancouver, ISO, and other styles
6

Al Mandhari, A. K., M. R. Al Rawahi, K. H. Al Habsi, et al. "Improving Oil Recovery by Increasing the Annual Water Flood Throughput in Carbonate Reservoir." In SPE Conference at Oman Petroleum & Energy Show. SPE, 2025. https://doi.org/10.2118/225225-ms.

Full text
Abstract:
Abstract In the Daleel field, oil production comes primarily from low permeability reservoirs containing light oil. Due to limited aquifer support, conventional waterflooding was used when reservoir pressure fell below the bubble point, resulting in gas interference and flow loss in many wells. A new trial aims to increase annual waterflood throughput from 3.7% to 7.5% by gradually raising water injection rates from 10,000 bbl/d to 20,000 bbl/d over two years, thereby improving flood efficiency and enhancing oil displacement. A crucial factor in waterflood projects is the number of pore volume
APA, Harvard, Vancouver, ISO, and other styles
7

Jin, Yao. "Research on Stress in Obround and Out-of-Roundness Shells." In ASME 2024 Pressure Vessels & Piping Conference. American Society of Mechanical Engineers, 2024. http://dx.doi.org/10.1115/pvp2024-121933.

Full text
Abstract:
Abstract Using the closed-form solution of obround shell, the stress and displacement of obround shells were theoretically analyzed. With the straight segment introduced, the maximum stresses and displacement of obround shells increase significantly. The length of the straight segment is a key factor in determining the maximum stress and location. For obround shells, the maximum stress is the function of two dimensionless geometrical parameters. Parameter study results show that for most engineering applications, the maximum stress occurs in the middle section of the curved segment. The maximu
APA, Harvard, Vancouver, ISO, and other styles
8

Guo, Shuangxi, Yilun Li, Weimin Chen, and Yiqin Fu. "Non-Linearly Restoring Performance of Catenary Mooring-Line Under Consideration of Its Dynamic Behaviors." In ASME 2017 36th International Conference on Ocean, Offshore and Arctic Engineering. American Society of Mechanical Engineers, 2017. http://dx.doi.org/10.1115/omae2017-61651.

Full text
Abstract:
Floating bodies such as oil rig/production platform and wind turbine in ocean need to be fixed or controlled at expected position by its supporting system which includes tension tendon and catenary mooring-line. Recently, the later one, catenary mooring-line, is increasingly used in deeper water due to its lower cost and easier installment. As the floating platform are developed toward deeper water depth, the length of the mooring-line become larger and consequently the dynamic behaviors such as the structural inertia and hydrodynamic inertia/damping of the mooring-line become more obvious. In
APA, Harvard, Vancouver, ISO, and other styles
9

Seo, Eun Jung, Amrita Bag, Michael J. Gaudet, et al. "Evaluation of Fracture Toughness of Welded Line Pipe Steels for Hydrogen Gas Transportation Based on ASME B31.12 and Alternative Test Method Development." In 2024 15th International Pipeline Conference. American Society of Mechanical Engineers, 2024. https://doi.org/10.1115/ipc2024-132910.

Full text
Abstract:
Abstract A high-strength line pipe steel grade, namely API X65, has been developed and qualified for its use under pressurized hydrogen gas following the ASME B31.12 code. The bolt-load compact specimens taken from the base metal, heat-affected zone, and weld seam of the electric resistance welded (ERW) pipes were tested using a constant displacement method in 100% hydrogen at pressure up to 13.8 MPa (2000 psi) for 1000 hours. All fracture toughness testing was conducted at RINA Consulting – Centro Sviluppo Materiali SpA and EWI Hydrogen Environment Testing Lab, using approximately 50 specimen
APA, Harvard, Vancouver, ISO, and other styles
10

Truong, Andrew, and Mojtaba Sharifi. "Design and Fabrication of an Upper Limb Exoskeleton for Shoulder and Elbow Assistance With Four Actuated DOFs." In ASME 2024 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2024. https://doi.org/10.1115/imece2024-140439.

Full text
Abstract:
Abstract People who have physical deformities or suffer the long-term effects of a stroke or spinal injury depend on assistive devices to help with daily activities. Over the years, there have been adequate advancements in the overall design of upper limb exoskeletons, with current models having more degrees of freedom (DOF) than before. More DOF is beneficial as it allows the limb to move more naturally. Despite great advances, current models on the market are large, bulky, and heavy. They are difficult to move and are often stationary. This study aims to improve the design of an existing por
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Minimum displacement factor' for particular source types:
Journal articles
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography