Relevant bibliographies by topics / Nanocomposite coating structure

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Book chapters
  4. Conference papers

Academic literature on the topic 'Nanocomposite coating structure'

Author: Grafiati
Published: 28 May 2022
Last updated: 31 July 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Nanocomposite coating structure.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Nanocomposite coating structure"

1

Zhu, Yanrong, Sandeep Kottarath, Jude O. Iroh, and Richard A. Vaia. "Progressive Intercalation and Exfoliation of Clay in Polyaniline–Montmorillonite Clay Nanocomposites and Implication to Nanocomposite Impedance." Energies 15, no. 15 (2022): 5366. http://dx.doi.org/10.3390/en15155366.

Full text
Abstract:
Conducting polymers, such as polyaniline (PANi) and polypyrrole (PPy), and their nanocomposites, are desired in a wide range of applications, including supercapacitors, lithium ion battery, chemical sensors, biosensors, barrier thin films, and coatings, because of their interesting electrical and electrochemical properties. It is well known that the properties of polymer nanocomposites depend on their chemical structure, as well as their microstructure, yet scientists and engineers have not fully understood how to properly control the structure of polymer nanocomposites. In this study, it is s
APA, Harvard, Vancouver, ISO, and other styles
2

Kadhim, Hala M. "Microstructure Study and Morphology of Ni / Nano Al2O3 Composite Coating Synthesied by Electroless Plating." Diyala Journal of Engineering Sciences 14, no. 3 (2021): 1–7. http://dx.doi.org/10.24237/djes.2021.14301.

Full text
Abstract:
The electroless deposition method was used to prepare Ni-based nanocomposite coatings, this approach represents an alternate way of having coatings on the different substrates. Most of the previous literatures on this subject and work deals with a study the effect of the process conditions and, Bath composition on the microstructure at the macroscale of Ni-Al2O3 composite coatings. Though, effect on the step structure of the composition of the bath and microstructure are little, the present work aims to study the effect of hard ceramic Al2O3 nanoparticles at different concentrations (0.0, 0.5,
APA, Harvard, Vancouver, ISO, and other styles
3

Wu, Chun, Xiang Xuan Liu, and Xuan Jun Wang. "A Novel Low Infrared Emissivity Material by Ni-P-CB Electroless Nanocomposite." Advanced Materials Research 79-82 (August 2009): 521–24. http://dx.doi.org/10.4028/www.scientific.net/amr.79-82.521.

Full text
Abstract:
Ni-P-CB nanocomposite coatings were successfully deposited on the ABS plastic matrix by electroless plating. Scanning electronic microscopy (SEM) and X-ray diffraction (XRD) spectrometer were used to examine surface morphology and structure of the as-plated coating. Energy dispersive spectroscopy (EDS) is adopted to obtain the component analysis of the Ni-P-CB composite coating, and the infrared emissivity of coatings were investigated by IRE-I Infrared Emissometer. The SEM and XRD results indicated that the nanoparticles were dispersed homogeneously in Ni-P coating. The result of EDS shows th
APA, Harvard, Vancouver, ISO, and other styles
4

Algailani, Hiba M., Adel K. Mahmoud, and Hanaa A. Al-Kaisy. "Fabrication of Ni-ZrO2 Nanocomposite Coating by Electroless Deposition Technique." Engineering and Technology Journal 38, no. 5A (2020): 649–55. http://dx.doi.org/10.30684/etj.v38i5a.491.

Full text
Abstract:
This work aims preparation of Ni-based nanocomposite coating by electroless deposition method onto stainless steel (316L) substrate, the present work will compare the effects of incorporation of ZrO2 nanoparticles at different percentages (1.25 wt %, 2.25 wt %, and 4.25 wt %) Ni-based electroless deposition coating of the bath nanocomposite on the phase structure, microhardness, and corrosion resistance is studied. Where the structure and chemical composition of nanocomposite coatings were studied by using (X-ray), (SEM) and (EDS). of Ni - ZrO2 nanocomposite coating exhibits much-increased mic
APA, Harvard, Vancouver, ISO, and other styles
5

Wang, Yuxin, Bo Hu, See Leng Tay, Fengyan Hou, Wei Gao, and Weiwei Chen. "The microstructure and mechanical properties of Ni–Co–ZrO2 nanocomposite coatings." International Journal of Modern Physics B 31, no. 16-19 (2017): 1744022. http://dx.doi.org/10.1142/s0217979217440222.

Full text
Abstract:
Ni–Co–ZrO2 nanocomposite coatings have been electroplated on mild steel by adding ZrO2 nanoparticles into an Ni–Co plating solution. The microstructure and mechanical properties of nanocomposite coatings were systematically investigated. The results show that the microhardness of Ni–Co–ZrO2 nanocomposite coatings varied significantly with the quantity of ZrO2 nanoparticles. Ni–Co–10 g/L ZrO2 nanocomposite coating exhibited the optimum mechanical properties due to the dispersion strengthening effect. Addition of ZrO2 nanoparticles beyond 10 g/L led to particle agglomeration and caused a porous
APA, Harvard, Vancouver, ISO, and other styles
6

Yusrini, Marita, and Yaacob Iskandar Idris. "Dispersion of Strengthening Particles on the Nickel-Iron-Silicon Nitride Nanocomposite Coating." Advanced Materials Research 647 (January 2013): 705–10. http://dx.doi.org/10.4028/www.scientific.net/amr.647.705.

Full text
Abstract:
Nickel-iron-silicon nitride nanocomposite coatings were prepared by electrodeposition technique. The deposition was performed at current density of 11.5 A dm-2. Nano-size silicon nitride was mixed in the electrolyte bath as dispersed phase. The effects of silicon nitride nanoparticulates in the nickel-iron nanocomposite coating were investigated in relation to the concentration of silicon nitride in the plating bath. X-ray diffraction (XRD) analysis showed that the deposited nickel iron alloy coating has face-centered cubic structure (FCC). However, a mixture of body-centered cubic (BCC) and f
APA, Harvard, Vancouver, ISO, and other styles
7

Zhang, Huiying, Xiang Li, Wenjie Qian, et al. "Characterization of mechanical properties of epoxy/nanohybrid composites by nanoindentation." Nanotechnology Reviews 9, no. 1 (2020): 28–40. http://dx.doi.org/10.1515/ntrev-2020-0003.

Full text
Abstract:
AbstractThe carbon nanofibers and molybdenum disulfide (CNF-MoS2) nanohybrid material was fabricated and incorporated into epoxy resin to form the nanocomposite coating. Firstly, microstructure observation shows that each CNF was uniformly wrapped up with MoS2 nanosheets, and the nanohybrids were well dispersed in the coating. Then, nanoindentation experiments were carried out to explore the effect of the CNF-MoS2 nanohybrids on the mechanical properties of the epoxy resin coating. The results demonstrate that elastic modulus, hardness and creep deformation resistance of the CNF-MoS2 epoxy res
APA, Harvard, Vancouver, ISO, and other styles
8

Xue, Yu Jun, Chen Shen, Ji Shun Li, Hang Li, and Dong Hong Si. "Corrosion Resistance of Ni-Y2O3 Composite Coating Prepared by Electrodeposition under Ultrasonic Condition." Advanced Materials Research 97-101 (March 2010): 1235–38. http://dx.doi.org/10.4028/www.scientific.net/amr.97-101.1235.

Full text
Abstract:
Ni-Y2O3 nanocomposite coating was electrodeposited from a nickel sulfamate solution containing Y2O3 particles and ultrasonic was applied during the process of the electrodeposition. The surface morphology and microstructure of the composite coatings were analyzed by a scanning electronic microscope (SEM) and a high-resolution transmission electron microscope (HRTEM). The corrosion resistence of the coatings was evaluated in the solution of 10 wt.% HCl aqueous solution. The results indicate that the Ni-Y2O3 nanocomposite coating shows a refined crystal grain and improved corrosion resistance co
APA, Harvard, Vancouver, ISO, and other styles
9

Borowski, Jacek, Tomasz Rybak, Mikhail Ignatiev, Hanna Wiśniewska-Weinert, Igor Dobrovnik, and Volf Leshchynsky. "Nanocomposite PVD Coatings Applied to Cold Plastic Forming Tools." Materials Science Forum 674 (February 2011): 105–12. http://dx.doi.org/10.4028/www.scientific.net/msf.674.105.

Full text
Abstract:
Cold forging tools most often fail as a result of wearing down surface layer which works with forming part. Deposition of a hard coating on the working surface is widely applied to increase tool durability. In this respect technologies of production of top layers with the use of nanocomposite materials provide great opportunities of modification of tribological properties. This paper presents results of metallographic, SEM and HRTEM analysis of PVD nanocomposite coatings [1] (nACVIc, TiCN-CBC and TiCN-NP-MOVIC). The tribological tests with ball on disc (T10) tester and industrial tests of forg
APA, Harvard, Vancouver, ISO, and other styles
10

Tian, Ya Fang, Xian Hui Li, Zheng Hong Ao, and Yu Jun Xue. "Corrosion Resistance of Ni-ZrO2 Nanocomposite Coating Prepared by Pulse Electrodeposition with Rotating Cathode in an Ultrasonic Field." Applied Mechanics and Materials 278-280 (January 2013): 422–25. http://dx.doi.org/10.4028/www.scientific.net/amm.278-280.422.

Full text
Abstract:
The Ni- ZrO2 nanocomposite coatings were prepared by pulse electrodeposition with rotating cathode in an ultrasonic field, and the corrosion resistance of the coatings were studied in 5% H2SO4. The surface morphologies of composite coatings after corrosion were analyzed by scanning electron microscope (SEM). And corrosion rate was tested using an electronic balance. The results shows that, compared with pure Ni coating, pulse current composite coating and pulse current composite coating with ultrasound, the Ni-ZrO2 nanocomposite coating prepared by pulse electrodeposition with rotating cathode
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Nanocomposite coating structure"

1

Musino, Dafne. "Impact of surface modification on the structure and dynamics of silica-polymer nanocomposites." Thesis, Montpellier, 2017. http://www.theses.fr/2017MONTS015/document.

Full text
Abstract:
Les matériaux nanocomposites obtenus par la dispersion de charges nanométriques dans un polymère ont de nombreuses applications industrielles à cause de l’amélioration des propriétés des matrices. La dispersion des charges pendant le procès de préparation des nanocomposites est déterminée par les interactions entre charges et avec le polymère. L’état final de dispersion impacte les propriétés structurales, dynamiques et mécaniques du matériau.Dans ce travail de thèse, nous proposons l’étude de nanocomposites produits par dispersion de billes de silice hydrophiles dans une matrice de polymère h
APA, Harvard, Vancouver, ISO, and other styles
2

Павлов, А. Г. "Формирование нанокомпозитов". Thesis, Сумский государственный университет, 2017. http://essuir.sumdu.edu.ua/handle/123456789/66635.

Full text
Abstract:
В промышленности используются различные материалы для покрытий и способы их нанесения. Задача повышения ресурса деталей машин, оборудования и инструмента решается в мире за счет нанесения на них многофункциональных покрытий, в том числе нанокомпозитных. Такие покрытия обладают свойствами, необходимыми для работы деталей и инструмента с высокой твердостью и низким коэффициентом трения. Эти свойства обеспечиваются за счет особой нанокомпозитной структуры покрытий, представляющей собой нанокристаллитные керамические зерна, распределенные в матрице.
APA, Harvard, Vancouver, ISO, and other styles
3

Prandato, Emeline. "Relations structure-propriétés et résistance à l’endommagement de vernis acrylate photo-polymérisables pour substrats thermoplastiques : évaluation de monomères bio-sourcés et de nano-charges." Thesis, Lyon, INSA, 2013. http://www.theses.fr/2013ISAL0103/document.

Full text
Abstract:
L’objectif de ces travaux a été de développer des vernis acrylate photo-polymérisables à 100% d’extrait sec, destinés à protéger des pièces thermoplastiques en polycarbonate contre les endommagements mécaniques, en particulier contre la rayure. Les relations entre la composition, la structure et les propriétés de ces revêtements ont été explorées. Pour ce faire ont été étudiées la morphologie, les propriétés thermomécaniques ainsi que la résistance à la rayure des matériaux. Cette dernière a été évaluée par des tests de micro-scratch. La cinétique de formation des réseaux polymères a elle auss
APA, Harvard, Vancouver, ISO, and other styles
4

Akbari, Alireza. "Nanocomposite TIN-NI PVD coatings : synthesis, structural and mechanical properties." Université de Poitiers. UFR des sciences fondamentales et appliquées, 2006. http://www.theses.fr/2006POIT2362.

Full text
Abstract:
Des revêtements nanocomposites TiN-Ni ont été élaborés par pulvérisation ionique réactive (PIR) et par pulvérisation magnétron réactive (PMR). Les propriétés structurales et les contraintes résiduelles ont été étudiées principalement en utilisant la diffraction des rayons X. Les propriétés mécaniques - dureté, ténacité, adhérence au substrat et résistance à l’usure - ont été évaluées par nanoindentation, test de rayure, indentation à forte charge, tribomètre pion-disque et profilométrie 3D. Les revêtements élaborés par la technique PIR se composent de nanograins (<10 nm) de TiN entourés par
APA, Harvard, Vancouver, ISO, and other styles
5

Liu, Xuejie. "Basic structure and formation mechanism of Ti-Si-N superhard nanocomposite coatings." Heimsheim Jost-Jetter, 2008. http://d-nb.info/99307751X/04.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Liu, Xuejie. "Basic structure and formation mechanism of Ti-Si-N superhard nanocomposite coatings." Heimsheim : Jost-Jetter, 2009. http://d-nb.info/994974574/34.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Rassokha, I. V., T. G. Dubrava, L. V. Ostankova, et al. "Application of Nanocomposite Coatings with Different Structural Physical and Chemical Characteristics in Tissue Engineering." Thesis, Sumy State University, 2012. http://essuir.sumdu.edu.ua/handle/123456789/34963.

Full text
Abstract:
The research covers the results of experimental studies of the effect character of nanocomposite coatings with different physical and chemical parameters (type, roughness, hydrophilic-hydrophobic characteristics) on structural and functional properties (adhesive potential, phenotype, gene expression) of mesenchymal stem cells (MSCs). On the tested nanocoatings (Al2O3, ZrO2, Ta2O5) the capability of oxide coating Al2O3 to enrich the in vitro cultured bone marrow (BM) with the cells of MSCs phenotype markers as well as to increase the expression rate of ido gene in them, which may extend th
APA, Harvard, Vancouver, ISO, and other styles
8

Liu, Xuejie [Verfasser]. "Basic structure and formation mechanism of Ti-Si-N superhard nanocomposite coatings / vorgelegt von Xuejie Liu." Heimsheim : Jost-Jetter, 2009. http://d-nb.info/994974574/34.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Kovaleva, M. G., M. Y. Arseenko, M. S. Prozorova, Y. N. Tyurin, and O. V. Kolisnichenko. "Structure and Properties of Nanocomposite Coatings Based on Titanium, Oxygen, Carbon and Hydrogen Obtained by the Cumulative-Detonation Device." Thesis, Sumy State University, 2012. http://essuir.sumdu.edu.ua/handle/123456789/34889.

Full text
Abstract:
Nanocomposite coatings based on Ti, O, C and H thickness of 70 – 200 microns with hardness of 1015 250 HV0.05 and porosity 2 – 5% were deposited on aluminium samples by using the cumulativedetonation equipment. The nanocomposite coatings were examined by scanning electron microscopy (SEM), transmission electron microscopy (TEM) with diffraction, X-ray phase analysis, hardness measurements. It is shown that the area of the coating that adjoins to the substrate contains a transition layer of intermetallic TiAl and the nanocomposite coatings based on Ti, O, C and H are characterized by the
APA, Harvard, Vancouver, ISO, and other styles
10

Mogonye, Jon-Erik. "Stable Nanocrystalline Au Film Structures for Sliding Electrical Contacts." Thesis, University of North Texas, 2016. https://digital.library.unt.edu/ark:/67531/metadc849672/.

Full text
Abstract:
Hard gold thin films and coatings are widely used in electronics as an effective material to reduce the friction and wear of relatively less expensive electrically conductive materials while simultaneously seeking to provide oxidation resistance and stable sliding electrical contact resistance (ECR). The main focus of this dissertation was to synthesize nanocrystalline Au films with grain structures capable of remaining stable during thermal exposure and under sliding electrical contact stress and the passing of electrical current. Here we have utilized a physical vapor deposition (PVD) tech
APA, Harvard, Vancouver, ISO, and other styles

Book chapters on the topic "Nanocomposite coating structure"

1

Ji, S., H. Gui, G. Guan, M. Zhou, Q. Guo, and M. Y. J. Tan. "Designing Waterborne Protective Coatings Through Manipulating the Nanostructure of Acrylic-Based Nanocomposites." In Lecture Notes in Civil Engineering. Springer Nature Singapore, 2023. http://dx.doi.org/10.1007/978-981-99-3330-3_14.

Full text
Abstract:
AbstractWaterborne coatings with intended functionalities have been designed by manipulating acrylic-based nanocomposites with different nanostructures. Taking advantage of the favorable structure of acrylic copolymers, three waterborne coatings with various desired properties were created through molecular engineering either by copolymerizing with other components or through nanocomposite formation. This approach was demonstrated by synthesizing acrylic-based waterborne coatings with three different nanostructures, namely homogeneous, worm-like, and spherical-like nanostructures. The properti
APA, Harvard, Vancouver, ISO, and other styles
2

Balagna, Cristina, Sara Ferraris, Sergio Perero, et al. "Silver Nanocluster/Silica Composite Coatings Obtained by Sputtering for Antibacterial Applications." In Structural Nanocomposites. Springer Berlin Heidelberg, 2013. http://dx.doi.org/10.1007/978-3-642-40322-4_10.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Meng, Wen Jin, and G. Z. Voyiadjis. "Structure and Mechanical Properties of Ceramic Nanocomposite Coatings." In ICASE/LaRC Interdisciplinary Series in Science and Engineering. Springer Netherlands, 2003. http://dx.doi.org/10.1007/978-94-017-0385-7_4.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Siddiqui, Naveed A., Jang Kyo Kim, Farjaad Muzaffar, and Arshad Munir. "Self-Healing Glass Fibres with Carbon Nanotube-Epoxy Nanocomposite Coating." In Advances in Composite Materials and Structures. Trans Tech Publications Ltd., 2007. http://dx.doi.org/10.4028/0-87849-427-8.805.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Zhou, Shuxue, Limin Wu, Bo You, and Guangxin Gu. "Preparation, Structure and Properties of Organic-Inorganic Nanocomposite Coatings." In ACS Symposium Series. American Chemical Society, 2009. http://dx.doi.org/10.1021/bk-2009-1002.ch010.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Holban, Alina Maria, Alexandru Mihai Grumezescu, and Crina Maria Saviuc. "Magnetite Nanocomposites Thin Coatings Prepared by MAPLE to Prevent Microbial Colonization of Medical Surfaces." In Advanced Structured Materials. Springer India, 2015. http://dx.doi.org/10.1007/978-81-322-2473-0_10.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Sobol’, Oleg, and Osman Dur. "Structural Engineering of Nanocomposite Coatings Based on Tungsten and Titanium Carbides." In Advances in Design, Simulation and Manufacturing III. Springer International Publishing, 2020. http://dx.doi.org/10.1007/978-3-030-50794-7_54.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Pogrebnjak, A. D., V. M. Beresnev, M. V. Il'yashenko, et al. "Structure and Properties Multilayered Micro- and Nanocomposite Coatings of Ti-N-Al/Ti-N/Al2O3." In Ceramic Engineering and Science Proceedings. John Wiley & Sons, Inc., 2011. http://dx.doi.org/10.1002/9781118095362.ch7.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Beresnev, V. M., I. N. Torianyk, A. D. Pogrebnjak, et al. "Structure and Physical and Mechanical Properties of Nanocomposite (Zr-Ti-Cr-Nb)N and (Ti-Zr-Al-Nb-Y)N Coatings, Obtained by Vacuum-Arc Evaporation Method." In Springer Proceedings in Physics. Springer International Publishing, 2014. http://dx.doi.org/10.1007/978-3-319-06611-0_5.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Higazy, Shimaa A., Olfat E. El-Azabawy, and Mohamed S. Selim. "Superhydrophobic Polymeric Nanocomposites Coatings for Effective Corrosion Protection." In Advances in Organic Synthesis. BENTHAM SCIENCE PUBLISHERS, 2023. http://dx.doi.org/10.2174/9789815040791123180008.

Full text
Abstract:
The contemporary era of studying superhydrophobic surfaces began in 1997, when Neinhuis and Barthlott discovered the self-cleaning qualities of the lotus effect. Corrosion of steel represents an important industrial issue with well-known negative economic and environmental consequences. The protection of steel objects during service operations is an inexhaustible research subject because of the steel's high demand in the industry. Anticorrosive coatings have aided in extending the life of the material without impairing its bulk qualities. The microporous structure of polymers allows corrosive
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Nanocomposite coating structure"

1

Arumugam, Ganesh Kumar, Sumil Thapa, Venkat Kamavaram, Andrea Mansfeld, Ramiro Maldonado, and Matthew Nakatsuka. "Enabling Decarbonization through Conversion of Natural Gas Pipelines to Blended Hydrogen Service through a Nanocomposite Surface Treatment." In CONFERENCE 2024. AMPP, 2024. https://doi.org/10.5006/c2024-21204.

Full text
Abstract:
Abstract The next phase of a global energy transition is hinging closely on finding fuel sources with substantially reduced carbon footprint. One way of doing so is to enable the use of Hydrogen (H2) rather than natural gas while still maintaining the existing legacy transport pipeline infrastructure. The presence of hydrogen in natural gas blend has been shown to cause weakening of steel even at extremely low concentrations and steps must be taken to mitigate the presence of hydrogen. Although embrittlement can be mitigated using specific metal alloys, the extensive cost of such retrofitting
APA, Harvard, Vancouver, ISO, and other styles
2

“Swami” Swaminathan, V. P., Ronghua Wei, and David W. Gandy. "Nano-Structured Erosion Resistant Coatings for Gas and Steam Turbines." In AM-EPRI 2007, edited by R. Viswanathan, D. Gandy, and K. Coleman. ASM International, 2007. https://doi.org/10.31399/asm.cp.am-epri-2007p0447.

Full text
Abstract:
Abstract Erosion from solid and liquid particles in gas turbine and steam turbine compressors degrades efficiency, increasing downtime and operating costs. Conventional erosion-resistant coatings have temperature and durability limitations. Under an Electric Power Research Institute (EPRI) project, ultra-hard nano-coatings (~40 microns thick) were developed using Plasma Enhanced Magnetron Sputtering (PEMS). In Phase I, various coatings—including TiSiCN nanocomposites, stellite variants, TiN monolayers, and multi-layered Ti-TiN and Ti-TiSiCN—were deposited on turbine alloys (Ti-6Al-4V, 17-4 PH,
APA, Harvard, Vancouver, ISO, and other styles
3

Akram, Deewan, Eram Sharmin, and Sharif Ahmad. "Biohybrid Silver Nanocomposites as Antimicrobial Corrosion Protective Coating Materials." In CORROSION 2012. NACE International, 2012. https://doi.org/10.5006/c2012-01739.

Full text
Abstract:
Abstract Organic-inorganic hybrid polyurethane silver nanocomposite (Ag/LPOSiPU) were prepared in three steps- (i) synthesis of organic-inorganic hybrids (LPOSi) from linseed oil polyol (LPO) as organic and tetraethoxyorthosilane (TEOS) as inorganic precursors, respectively through sol-gel process, (ii) preparation of silver nano-particles in organic-inorganic hybrids (LPOSi) via reduction of silver salt (AgNO3) by employing N,N_-dimethylformamide (DMF) as reducing agent at room temperature to obtain Ag/LPOSi, and (iii) Ag/LPOSi further treated with toluene 2,4 di-isocyanate to form their poly
APA, Harvard, Vancouver, ISO, and other styles
4

Rahman, Mohammad Mizanur. "A Promising Coating of Nanostructured Graphene-Ceria Nanofillers in Polyurethane for Corrosion Protection." In CORROSION 2017. NACE International, 2017. https://doi.org/10.5006/c2017-09217.

Full text
Abstract:
Abstract A proper combination of graphene and metal oxide nanoparticles has been considered as an efficient reinforcement material in developing next-generation multifunctional coatings. In this study a simple method has been applied to fabricate graphene nanocomposite with the inclusion of cerium oxide (CeO2) nanoparticles which can be effectively implemented as a reinforcement material in polyurethane (PU) coatings for corrosion protection. The corrosion resistance of mild steel coated with a PU coating containing graphene/CeO2 was pointedly higher than with a pure PU coating and a PU coatin
APA, Harvard, Vancouver, ISO, and other styles
5

Radwan, A. Bahgat, Kamran Ali, Said Elmi Ahmed, et al. "Novel Ni-B/AlN Nanocomposite Coatings for Oil and Gas Industry." In CORROSION 2018. NACE International, 2018. https://doi.org/10.5006/c2018-11399.

Full text
Abstract:
Abstract Corrosion is a major cause of materials and equipment failure in the oil and gas industry, and its prevention is crucial to ensure reliability of the assets. Towards, this goal, Ni–B/AlN nanocomposite coatings were synthesized through electrodeposition technique and their properties were investigated. It is noticed that the incorporation of AlN nanoparticles into Ni-B matrix has a pronounced effect on its surface, structural, mechanical and anticorrosion properties. The improved properties of Ni-B/AlN nanocomposite coatings make them attractive for many industrial applications.
APA, Harvard, Vancouver, ISO, and other styles
6

Advincula, Rigoberto C. "Superhydrophobic and Nanostructured HPHT Stable Polybenzoxazine Nanocomposite Coatings for Oil and Gas." In CORROSION 2019. NACE International, 2019. https://doi.org/10.5006/c2019-13524.

Full text
Abstract:
Abstract Coatings have the function of resistance to environmental attack, i.e. barrier protection, abrasion and chemical resistance, yet a number of them have not been optimized against wetting when it comes to dual or enhanced properties and durability at higher temperatures and pressures (HPHT). Polybenzoxazine (PBZ) chemistry and polymerization have enjoyed tremendous growth due to its versatility in chemistry and a number of advantages in properties for high-temperature applications compared to epoxy, polyurethane (PU), phenolformaldehyde (PF) resins. This is due to a wide variety of mono
APA, Harvard, Vancouver, ISO, and other styles
7

Blondelli, Francesca, Sabina Botti, Francesca Bonfigli, Elisa Toto, Susanna Laurenzi, and M. Gabriella Santonicola. "Polyimide/Graphene Nanocomposites as Antibacterial Coatings for Human Exploration Missions in Space." In IAF Materials and Structures Symposium, Held at the 75th International Astronautical Congress (IAC 2024). International Astronautical Federation (IAF), 2024. https://doi.org/10.52202/078369-0083.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Magnafico, Erika, Francesco Poli, Arnaldo Casalotti, and Giulia Lanzara. "Nanocomposite Coating for Strain Monitoring." In ASME 2019 Conference on Smart Materials, Adaptive Structures and Intelligent Systems. American Society of Mechanical Engineers, 2019. http://dx.doi.org/10.1115/smasis2019-5682.

Full text
Abstract:
Abstract In recent years carbon nanotubes (CNTs) have been widely used for the realization of polymeric matrix nanocomposites for strain monitoring applications in civil, biomedical and aerospace engineering. In fact, by embedding CNTs in an insulated polymer matrix, it is possible to realize a conductive nanocomposite with piezoresistive behaviour which allows to monitor the occurring strains through an electrical resistance change. In this work a conductive coating made of Multi-Walled Carbon Nanotubes (MWNTs) and PolymethylMethacrilate (PMMA) is fabricated and is applied onto a fiberglass s
APA, Harvard, Vancouver, ISO, and other styles
9

Xue, Yu-Jun, Chun-Yang Liu, Ji-Shun Li, et al. "Fabrication and Tribological Behavior of Ni-ZrO2 Nanocomposite Coatings Prepared by Electrodeposition in Ultrasonic Field." In ASME 2015 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. American Society of Mechanical Engineers, 2015. http://dx.doi.org/10.1115/detc2015-46246.

Full text
Abstract:
Ni-ZrO2 nanocomposite coatings were fabricated by electrodeposition from a modified Watt’s type electrolyte containing ZrO2 nanoparticles, where an ultrasonic field was imposed during electrodeposition process. The weight percent of ZrO2 in coatings and the surface morphology of coatings were examined. The microhardness and tribological properties of Ni-ZrO2 nanocomposite coatings and pure Ni coating were investigated. The results show that ultrasonic agitation can greatly affect the microstructure and the tribological behavior of Ni-ZrO2 nanocomposite coatings. The Ni-ZrO2 nanocomposite coati
APA, Harvard, Vancouver, ISO, and other styles
10

Ma, X. Q., T. DeCarmine, and T. D. Xiao. "Plasma Sprayed High Lubricity Nanocomposite Coatings." In ITSC2004, edited by Basil R. Marple and Christian Moreau. ASM International, 2004. http://dx.doi.org/10.31399/asm.cp.itsc2004p0812.

Full text
Abstract:
Abstract A typical high-pressure fuel pump for direct injection (DI) engines operates with fuels such as petroleum-based hydrocarbons that have inherent lubricating properties. However, environmental requirements put the thrush to use cleaner fuels that don’t contain lubricants and consequently an increasing abrasion problem presents with the surface of high-pressure fuel pump for direct injection engines. To alleviate this problem, the alternative solution is to promote wear and corrosion resistance of DI engines by applying high-lubricity coatings onto surfaces of engine components such as p
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Nanocomposite coating structure' for particular source types:
Journal articles
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography