Relevant bibliographies by topics / Plate temperature field

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Books
  4. Book chapters
  5. Conference papers
  6. Reports

Academic literature on the topic 'Plate temperature field'

Author: Grafiati
Published: 28 May 2022
Last updated: 30 July 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Plate temperature field.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Plate temperature field"

1

Song, Jiangnan, Ying Huang, Yi Liu, et al. "Numerical Investigation and Optimization of Cooling Flow Field Design for Proton Exchange Membrane Fuel Cell." Energies 15, no. 7 (2022): 2609. http://dx.doi.org/10.3390/en15072609.

Full text
Abstract:
High temperatures and non-uniform temperatures both have a negative bearing on the performance of proton exchange membrane fuel cells. The temperature of proton exchange membrane fuel cells can be lowered by reasonably distributed cooling channels. The flow field distribution of five different cooling plates is designed, and the temperature uniformity, pressure drop and velocity of each cooling flow field are analyzed by computational fluid dynamics technology. The results show that while the pressure drop is high, the flow channel distribution of a multi-spiral flow field and honeycomb struct
APA, Harvard, Vancouver, ISO, and other styles
2

Erdas, Andrea. "Magnetic field corrections to the repulsive Casimir effect at finite temperature." International Journal of Modern Physics A 31, no. 07 (2016): 1650018. http://dx.doi.org/10.1142/s0217751x16500184.

Full text
Abstract:
I investigate the finite temperature Casimir effect for a charged and massless scalar field satisfying mixed (Dirichlet–Neumann) boundary conditions on a pair of plane parallel plates of infinite size. The effect of a uniform magnetic field, perpendicular to the plates, on the Helmholtz free energy and Casimir pressure is studied. The [Formula: see text]-function regularization technique is used to obtain finite results. Simple analytic expressions are obtained for the zeta function and the free energy, in the limits of small plate distance, high temperature and strong magnetic field. The Casi
APA, Harvard, Vancouver, ISO, and other styles
3

Milošević-Mitić, Vesna, Ana Petrović, Nina Anđelić, and Miloš Jovanović. "The influence of temperature gradient on thin plates bending." FME Transactions 52, no. 1 (2024): 128–35. http://dx.doi.org/10.5937/fme2401128m.

Full text
Abstract:
Within the theory of thermo-elasticity, the temperature field of thin plates is commonly defined via two parameters: temperature in the mid-plane and linear temperature gradient normal to the mid-plane. First, the paper analytically proves the justification of that assumption in machine structures. Then, in an analytical closed form, applying the integral transformation method, the thin plate deflection caused by a constant temperature gradient is defined. It is shown that, in that case, the plate deflection does not depend on its thickness but only on the plate dimensions in the mid-plane. An
APA, Harvard, Vancouver, ISO, and other styles
4

Abiduev, P. L., T. G. Darmaev, and A. S. Buldaev. "Periodic temperature field in a composite plate." IOP Conference Series: Materials Science and Engineering 704 (December 13, 2019): 012010. http://dx.doi.org/10.1088/1757-899x/704/1/012010.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Erdas, Andrea, and Kevin P. Seltzer. "Finite temperature Casimir effect for massive scalars in a magnetic field." International Journal of Modern Physics A 29, no. 17 (2014): 1450091. http://dx.doi.org/10.1142/s0217751x14500912.

Full text
Abstract:
The finite temperature Casimir effect for a charged, massive scalar field confined between very large, perfectly conducting parallel plates is studied using the zeta function regularization technique. The scalar field satisfies Dirichlet boundary conditions at the plates and a magnetic field perpendicular to the plates is present. Four equivalent expressions for the zeta function are obtained, which are exact to all orders in the magnetic field strength, temperature, scalar field mass and plate distance. The zeta function is used to calculate the Helmholtz free energy of the scalar field and t
APA, Harvard, Vancouver, ISO, and other styles
6

Zhang, Xue-biao, Yu-long Yang, and Yu-jun Liu. "The Numerical Analysis of Temperature Field During Moveable Induction Heating of Steel Plate." Journal of Ship Production and Design 28, no. 02 (2012): 73–81. http://dx.doi.org/10.5957/jspd.2012.28.2.73.

Full text
Abstract:
In shipyards, hull curved plate formation is an important stage with respect to productivity and accuracy control of curved plates. Because the power and its distribution of induction heat source are easier to control and reproduce, induction heating is expected to be applied in the line heating process. This paper studies the moveable induction heating process of steel plate and develops a numerical model of electromagneticthermal coupling analysis and the numerical results consistent with the experimental results. The numerical model is used to analyze the temperature changing rules and the
APA, Harvard, Vancouver, ISO, and other styles
7

Zheng, Guochao, Fuli Wang, Baiping Yan, and Runting Cheng. "Temperature suppression of metal panel in electromagnetic field." Circuit World 46, no. 4 (2020): 317–24. http://dx.doi.org/10.1108/cw-07-2019-0069.

Full text
Abstract:
Purpose The purpose of this study is to suppress the temperature rise of high voltage wall bushing metal plate. Design/methodology/approach First, the authors built a model of a traditional metal plate and got the magnetic field intensity distribution by FEA tools. Optimized according to the magnetic field intensity distribution, the authors slot the traditional metal plate and embed permanent magnets in the slot. Finally, the authors got the temperature distribution diagrams of the above three cases at different current levels by FEA tools. Findings Slotted metal plate is beneficial to suppre
APA, Harvard, Vancouver, ISO, and other styles
8

Čajka, Radim. "Numerical Solution of Temperature Field for Stress Analysis of Plate Structures." Applied Mechanics and Materials 470 (December 2013): 177–87. http://dx.doi.org/10.4028/www.scientific.net/amm.470.177.

Full text
Abstract:
In the paper is described the solution of unsteady temperature field of multilayer plane structures. Nonlinear material and thermal properties of each layer for high temperature and fire is used. Defining the boundary conditions and calculation of the temperature at the contact material layers of the conditions of equality thermal flux is performed. The compiled program NONSTAC programmed numerical solution of differential equations modified heat conduction Euler and Runge - Kutta method with a variable integration step length. This computer program solves one dimensional temperature distribut
APA, Harvard, Vancouver, ISO, and other styles
9

Pawlus, Dorota. "Dynamic Response of Three-Layered Annular Plates in Time-Dependent Temperature Field." International Journal of Structural Stability and Dynamics 20, no. 12 (2020): 2050139. http://dx.doi.org/10.1142/s0219455420501394.

Full text
Abstract:
The paper presents a solution to the dynamic response of three-layered, annular plates that are thermo-mechanically loaded. Time-dependent forces are considered to act on the facings of the plate. The thermal loading is defined by a flat, axisymmetric temperature field whose profile is expressed by the stationary or increase in time temperature differences between the plate edges. The cases of the plates loaded only thermally or mechanically have been examined. The problem has been solved analytically and numerically using the approximation methods: orthogonalization and finite difference. The
APA, Harvard, Vancouver, ISO, and other styles
10

Kolahchi, R., M. Esmailpour, and M. Safari. "Magneto-Thermo-Mechanical Buckling Analysis of Mindlin Plate Reinforced with FG-Carbon Nanotubes." Archives of Civil Engineering 62, no. 3 (2016): 89–104. http://dx.doi.org/10.1515/ace-2015-0085.

Full text
Abstract:
Abstract A buckling analysis of temperature-dependent embedded plates reinforced by single-walled carbon nanotubes (SWCNTs) subjected to a magnetic field is investigated. The SWCNTs are distributed as uniform (UD) and three types of functionally graded nanotubes (FG), in which the material properties of the nano-composite plate are estimated based on the mixture rule. The surrounding temperature-dependent elastic medium is simulated as Pasternak foundation. Based on the orthotropic Mindlin plate theory, the governing equations are derived using Hamilton's principle. The buckling load of the st
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Plate temperature field"

1

Rao, Amar P. "The hydraulic connectivity, perennial warming and relationship to seismicity of the Davis-Schrimpf Seep Field, Salton Trough, California from new and recent temperature time-series." Thesis, California State University, Long Beach, 2017. http://pqdtopen.proquest.com/#viewpdf?dispub=10240644.

Full text
Abstract:
<p> The Davis-Schrimpf Seep Field is a cluster of about 50 transtension-related geothermal seeps in the Imperial Valley, southeastern California. Five temperature time-series were collected from four features and compared to one another, against prior time-series, and to local seismicity. Loggers placed in separate vents within one seep returned moderate anti-correlation. Vents may selectively clog and unclog. Clogging frequencies explaining the observed level of negative correlation were given. Loggers placed in the same vent produced 87-92% positive correlation. It is therefore likely
APA, Harvard, Vancouver, ISO, and other styles
2

Білоус, Д. О. "Моделювання впливу захисних покриттів на теплоперенесення в системі з узагальненими граничними умовами". Master's thesis, Сумський державний університет, 2019. http://essuir.sumdu.edu.ua/handle/123456789/75493.

Full text
Abstract:
Сформована математична задача дослідження, визначені початкові та граничні умови поширення теплової енергії. Виконано моделювання теплового поля, що базувалось на рішенні диференціального рівняння теплопровідності при двовимірному характері однорідного ізотропного середовища. Розроблена комп’ютерна програма в середовищі Matlab. Встановлена теплозахисна роль покриття на дуже малих проміжках часу, наприклад під час фрезерування складеною фрезою, коли одна ріжуча пластина знаходиться в контакті із оброблюваною поверхнею декілька мікросекунд.
APA, Harvard, Vancouver, ISO, and other styles
3

Monica, Andrew Hayes. "In-plane carbon nanotube field emitters for high temperature integrated electronics." Connect to Electronic Thesis (ProQuest) Connect to Electronic Thesis (CONTENTdm), 2008. http://worldcat.org/oclc/436284954/viewonline.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

郭明遠 and Ming-yuen Edward Kwok. "Numerical study of an isolated vortex and the lower critical field of a type-II superconductor in the presence of a twin plane." Thesis, The University of Hong Kong (Pokfulam, Hong Kong), 1996. http://hub.hku.hk/bib/B31213169.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Kwok, Ming-yuen Edward. "Numerical study of an isolated vortex and the lower critical field of a type-II superconductor in the presence of a twin plane /." Hong Kong : University of Hong Kong, 1996. http://sunzi.lib.hku.hk/hkuto/record.jsp?B19670151.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Гембара, Наталія Олександрівна, Н. О. Гембара та N. O. Hembara. "Математичне моделювання теплопровідності пластин і оболонок з багатошаровими покриттями". Thesis, Тернопільський національний технічний університет ім. Івана Пулюя, 2014. http://elartu.tntu.edu.ua/handle/123456789/4987.

Full text
Abstract:
Робота виконана в Українській академії друкарства Міністерства освіти і науки України. Захист відбувся в 2014 р., о 14 годині, на засіданні спеціалізованої Вченої ради Д 58.052.01 Тернопільського національного технічного університету ім. Івана Пулюя за адресою: 46001, м. Тернопіль, вул. Руська, 56. З дисертацією можна ознайомитись у бібліотеці Тернопільського національного технічного університету ім. Івана Пулюя за адресою: 46001, м. Тернопіль, вул. Руська, 56.<br>Дисертація присвячена побудові та реалізації математичних моделей теплопровідності оболонок та пластин з багатошаровими покрит
APA, Harvard, Vancouver, ISO, and other styles
7

Jordan, Marie-Odile. "Mise en place du systeme racinaire du mais : definition et caracterisation au champ et en conditions controlees des parametres descriptifs du systeme racinaire, construction de l'organigramme d'un modele cinetique." Université Louis Pasteur (Strasbourg) (1971-2008), 1986. http://www.theses.fr/1986STR13329.

Full text
Abstract:
Une analyse bibliographique montre que si l'architecture des parties aeriennes est bien connue chez le mais, il n'en est pas de meme du systeme racinaire. Nous avons donc entrepris un travail de synthese a ce sujet. Dans la premiere partie de cette etude, les parametres descriptifs de la structure racinaire sont definis. Leur evolution au cours du cycle est ensuite caracterisee en conditions habituelles de culture, et, en rhizotrons. Quatre categories de racines primaires ont pu etre mises en evidence
APA, Harvard, Vancouver, ISO, and other styles
8

Gavérina, Ludovic. "Caractérisation thermique de milieux hétérogènes par excitation laser mobile et thermographie infrarouge." Thesis, Bordeaux, 2017. http://www.theses.fr/2017BORD0012/document.

Full text
Abstract:
De nos jours, les matériaux composites sont très largement utilisés dans l’industrie aéronautique et aérospatiale car ils ont de très bonnes tenues mécaniques, mais ces matériaux comportent de fortes hétérogénéités dues aux fibres et aux liants qui les constituent. Ainsi, depuis de nombreuses années, l’équipe TIFC «Thermal Imaging Fields and Characterization » du département TREFLE de l’institut I2M développe des méthodes de mesure des propriétés thermophysiques de matériaux hétérogènes dans le plan ou dans l’épaisseur. Ces méthodes sont très variées du point de vue des méthodes inverses (tran
APA, Harvard, Vancouver, ISO, and other styles
9

You, Yu-Hao, and 游育豪. "Temperature field analysis of LED Cooling plate." Thesis, 2011. http://ndltd.ncl.edu.tw/handle/47196823727541780474.

Full text
Abstract:
碩士<br>元智大學<br>機械工程學系<br>99<br>As the demand of performance LED components increased and package size decreased, the heat generated more than before. The most popular ways to accelerate the cooling procedure are increase the contact area for cooling and choose the suitable materials. Aluminum heat plate is widely used for the cooling procedure, because aluminum possesses good heat dissipation, easy processed and low cost. In this study, we implemented experiment by using FLUENT, compare the results with results of temperature field by using wind tunnel testing machine. The proposed method i
APA, Harvard, Vancouver, ISO, and other styles
10

陳奇祥. "Fabrication of low-temperature processed poly-Si TFT with field-plate double offset-gate structure." Thesis, 1993. http://ndltd.ncl.edu.tw/handle/46474645231173944107.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Books on the topic "Plate temperature field"

1

Reynaud, Serge, and Astrid Lambrecht. Casimir forces and vacuum energy. Oxford University Press, 2017. http://dx.doi.org/10.1093/oso/9780198768609.003.0009.

Full text
Abstract:
The Casimir force is an effect of quantum vacuum field fluctuations, with applications in many domains of physics. The ideal expression obtained by Casimir, valid for perfect plane mirrors at zero temperature, has to be modified to take into account the effects of the optical properties of mirrors, thermal fluctuations, and geometry. After a general introduction to the Casimir force and a description of the current state of the art for Casimir force measurements and their comparison with theory, this chapter presents pedagogical treatments of the main features of the theory of Casimir forces f
APA, Harvard, Vancouver, ISO, and other styles
2

Awrejcewicz, Jan, Vadim A. Krysko, Anton V. Krysko, and Maxim V. Zhigalov. Mathematical Modelling and Numerical Analysis of Size-Dependent Structural Members in Temperature Fields: Regular and Chaotic Dynamics of Micro/Nano Beams, Plates and Shells. Springer International Publishing AG, 2020.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
3

Wright, A. G. Secondary emission and gain. Oxford University Press, 2017. http://dx.doi.org/10.1093/oso/9780199565092.003.0005.

Full text
Abstract:
Secondary-electron emission generates gain in conventional vacuum photomultipliers with discrete dynodes. This is a cascade process involving between 6 and 20 elements. Generally, the higher the number of stages, the higher is the gain and similarly for applied voltage. Gain is dependent on the composition of the dynodes, with SbCs and activated BeO being the most common materials. There are ten different dynode types, each of which serves a particular purpose: for example, operation in high magnetic fields and high temperature. The continuous channel dynode is available as a single unit and a
APA, Harvard, Vancouver, ISO, and other styles
4

Lilja, Sven. Climate, History, and Social Change in Sweden and the Baltic Sea Area From About 1700. Oxford University Press, 2017. http://dx.doi.org/10.1093/acrefore/9780190228620.013.633.

Full text
Abstract:
The growing concern about global warming has turned focus in Sweden and other Baltic countries toward the connection between history and climate. Important steps have been taken in the scientific reconstruction of climatic parables. Historic climate data have been published and analyzed, and various proxy data have been used to reconstruct historic climate curves. The results have revealed an ongoing regional warming from the late 17th to the early 21st century. The development was not continuous, however, but went on in a sequence of warmer and colder phases.Within the fields of history and s
APA, Harvard, Vancouver, ISO, and other styles

Book chapters on the topic "Plate temperature field"

1

Amarnath, E., and M. C. Lenin Babu. "Studies on Dynamic Characteristics of Sandwich Functionally Graded Plate Subjected to Uniform Temperature Field." In Lecture Notes in Mechanical Engineering. Springer Singapore, 2020. http://dx.doi.org/10.1007/978-981-15-5862-7_5.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Kukhar, Volodymyr, Oleksandr Kurpe, and Khrystyna Malii. "Temperature Field Behavior on Plate Width at Thermomechanical Rolling of Low Carbon Microalloyed Steel at the Steckel Mill." In Advanced Manufacturing Processes V. Springer Nature Switzerland, 2023. http://dx.doi.org/10.1007/978-3-031-42778-7_25.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Guo, Fuqiang, Gangtie Li, Shichao Chen, Xia Yang, Yizhen Huo, and Jinxiang Bai. "Study on Insulation and Anti-frost Heave Effect of Polystyrene Board Under the Condition of Mold Bag Concrete." In Lecture Notes in Civil Engineering. Springer Nature Singapore, 2024. http://dx.doi.org/10.1007/978-981-97-4355-1_40.

Full text
Abstract:
AbstractAs a new lining technology, mould bag lining technology has been widely used in recent years. In this paper, the channel frost heave in Hetao irrigation area of Inner Mongolia was studied and a field in-situ test platform was established. The experimental study on the insulation and anti-freeze of polystyrene board under the condition of concrete bag with different thickness was carried out by setting the concrete bag with different thickness and the test block of polystyrene board with different thickness. The research shows that the total accumulated temperature increases by 3.93%~9.
APA, Harvard, Vancouver, ISO, and other styles
4

Eduard, Starovoitov, Michael Zhuravkov, Denis Leonenko, and Yongtao Lyu. "Elastic Circular Three-Layer Plates in a Temperature Field." In Deformation of Three-layer Structural Elements in Thermal Radiation Fields. Springer Nature Singapore, 2024. https://doi.org/10.1007/978-981-97-7217-9_8.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Burov, A. N., B. P. Kolobov, and A. N. Popkov. "A Turbulence Model for Drag Reduction Dilute Polymer Solutions in Boundary Layer on a Flat Plate." In The Influence of Polymer Additives on Velocity and Temperature Fields. Springer Berlin Heidelberg, 1985. http://dx.doi.org/10.1007/978-3-642-82632-0_16.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Kudela, Pawel, Wiesław Ostachowicz, and Arkadiusz Zak. "Influence of Temperature Fields on Wave Propagation in Composite Plates." In Damage Assessment of Structures VII. Trans Tech Publications Ltd., 2007. http://dx.doi.org/10.4028/0-87849-444-8.537.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Chen, Yu-Xi, Yan-Ling Xu, Hua-Bin Chen, Hua-Jun Zhang, Shan-Ben Chen, and Yu Han. "Temperature Field of Double-Sided Asymmetrical MAG Backing Welding for Thick Plates." In Advances in Intelligent Systems and Computing. Springer International Publishing, 2015. http://dx.doi.org/10.1007/978-3-319-18997-0_19.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Urgela, S., and O. Lupták. "Determination of Temperature Fields Above Plates with Different Geometry Heated by Moist Air." In Flow Visualization VI. Springer Berlin Heidelberg, 1992. http://dx.doi.org/10.1007/978-3-642-84824-7_96.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Chung, Chih-Chung, Bo-Chi Chen, Te-Wei Tseng, and Yun-Tzu Lee. "The Slope Monitoring Using Embedded System with Optical-Thermal Image Fusion and Machine Learning." In Progress in Landslide Research and Technology, Volume 3 Issue 1, 2024. Springer Nature Switzerland, 2024. http://dx.doi.org/10.1007/978-3-031-55120-8_12.

Full text
Abstract:
AbstractTaiwan is at the junction of tectonic plates, with high mountainous terrain and abundant rainfall due to the rich moisture of the subtropical monsoon zone, which makes the already dangerous slopes even more unstable. By applying the digital camera measurement approach, with its moderate installation cost, high security, and mobility, it is possible to capture and monitor the hillside over an extended period, guaranteeing its stability. Photogrammetry is a recent technology that has gained popularity in many fields. Image analysis, achieved by capturing photographs, is a growing trend.
APA, Harvard, Vancouver, ISO, and other styles
10

Byun, Sung-Soo, and Peter J. Forrester. "Further Theory and Applications." In KIAS Springer Series in Mathematics. Springer Nature Singapore, 2024. http://dx.doi.org/10.1007/978-981-97-5173-0_6.

Full text
Abstract:
AbstractIn addition to an analogy with the Boltzmann factor of the OCP with inverse temperature $$\beta = 2$$ β = 2 , the GinUE eigenvalue PDF permits an interpretation as the absolute value squared of the ground state wave function for spinless fermions in the plane subject to a perpendicular magnetic field. More generally, for $$\beta $$ β twice an odd positive integer m the OCP Boltzmann factor occurs as proportional to the absolute value squared of Laughlin trial wavefunction in the theory of the fractional quantum Hall effect with filling fraction 1/m. In relation to the topic of chaotic
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Plate temperature field"

1

Son, Yixian, Xiaoyun Huang, Pingrui Kang, et al. "The Structural Optimization of LDMOS with Low-Temperature-Oxide Field Plate." In 2025 Conference of Science and Technology of Integrated Circuits (CSTIC). IEEE, 2025. https://doi.org/10.1109/cstic64481.2025.11017851.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Gaudino, Eliana, and Eliana Gaudino. "Comparative Numerical Analysis of Middle-Temperature and High Temperature versions of High-Vacuum Flat-Plate Collectors: Assessing Performance in the Field." In EuroSun 2024: 15th International Conference on Solar Energy for Buildings and Industry. International Solar Energy Society, 2024. https://doi.org/10.18086/eurosun.2024.07.06.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Andhika, Muhamad, and Simona Regenspurg. "Characterization of Silica Precipitation Kinetics under High Temperature Geothermal Field Conditions Using Ultrasonic Techniques." In CORROSION 2013. NACE International, 2013. https://doi.org/10.5006/c2013-02627.

Full text
Abstract:
Abstract Located along tectonic plate boundaries, Indonesia possesses an enormous potential of geothermal resources. From an estimated potential of 27 GW, only 4 % of electricity is currently produced from high temperature geothermal fields. The silica concentration in these high temperature geothermal brines is usually very high (several hundred mg/L). This represents one of the main obstacles for binary geothermal plant operation due to potential silica precipitation (scaling), which frequently causes operational problems by clogging the pipelines, reinjection wells, and even the pores of th
APA, Harvard, Vancouver, ISO, and other styles
4

Kara, Dogacan, Nazli Donmezer, Talha Furkan Canan, Ozlem Sen, and Ekmel Ozbay. "Effects of Field Plate on the Maximum Temperature and Temperature Distribution for GaN HEMT Devices." In ASME 2016 Heat Transfer Summer Conference collocated with the ASME 2016 Fluids Engineering Division Summer Meeting and the ASME 2016 14th International Conference on Nanochannels, Microchannels, and Minichannels. American Society of Mechanical Engineers, 2016. http://dx.doi.org/10.1115/ht2016-7367.

Full text
Abstract:
Field plated GaN high electron mobility transistors (HEMTs) are widely preferred amongst other GaN HEMT devices because of their ability to regulate electric field at high power densities. When operated at high power densities, GaN HEMTs suffer significantly from the concentrated heating effects in a small region called hotspot located closer to the drain edge of the gate. Although; the stabilizing effect of field plate on the electrical field distribution in HEMTs is known by researchers, its effect on temperature distribution and the hotspot temperature is still not studied to a greater exte
APA, Harvard, Vancouver, ISO, and other styles
5

Kumar, Sachin, Subhash Chander, DS Rawal Samuder Gupta, and Mridula Gupta. "Equivalent Channel Temperature in GaN HEMT with Field Plate." In 2020 5th International Conference on Devices, Circuits and Systems (ICDCS). IEEE, 2020. http://dx.doi.org/10.1109/icdcs48716.2020.243582.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Havrysh, Vasyl, and Lubov Kolyasa. "Temperature Field in a Thermosensitive Plate with Local Heating." In 2021 IEEE 16th International Conference on Computer Sciences and Information Technologies (CSIT). IEEE, 2021. http://dx.doi.org/10.1109/csit52700.2021.9648827.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Yarovaya, Anna. "Strain of elastic three-layer plate in temperature field." In 6TH INTERNATIONAL CONFERENCE FOR PHYSICS AND ADVANCE COMPUTATION SCIENCES: ICPAS2024. AIP Publishing, 2025. https://doi.org/10.1063/5.0265822.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Qian, Hai, Ding Zhou, Weiqing Liu, and Hai Fang. "3-D Steady Temperature Field in a Laminated Rectangular Plate." In 2014 International Conference on Mechatronics, Electronic, Industrial and Control Engineering. Atlantis Press, 2014. http://dx.doi.org/10.2991/meic-14.2014.285.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Wu, Shuang, Luqiao Yin, Kailin Ren, and Jianhua Zhang. "Partial etched AlGaN layer on p-GaN HEMT with gate field plate and drain field plate for channel temperature reduction." In 2022 19th China International Forum on Solid State Lighting & 2022 8th International Forum on Wide Bandgap Semiconductors (SSLCHINA: IFWS). IEEE, 2023. http://dx.doi.org/10.1109/sslchinaifws57942.2023.10071069.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Li, Chongguang, Junchang Li, and Zebin Fan. "Temperature field simulation of thin plate heated by CO 2 laser beam." In 2nd international Symposium on Advanced Optical Manufacturing and Testing Technologies, edited by Li Yang, Shangming Wen, Yaolong Chen, and Ernst-Bernhard Kley. SPIE, 2006. http://dx.doi.org/10.1117/12.674266.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Plate temperature field"

1

DiDomizio, Matthew, and Jonathan Butta. Measurement of Heat Transfer and Fire Damage Patterns on Walls for Fire Model Validation. UL Research Institutes, 2024. http://dx.doi.org/10.54206/102376/hnkr9109.

Full text
Abstract:
Fire models are presently employed by fire investigators to make predictions of fire dynamics within structures. Predictions include the evolution of gas temperatures and velocities, smoke movement, fire growth and spread, and thermal exposures to surrounding objects, such as walls. Heat flux varies spatially over exposed walls based on the complex thermal interactions within the fire environment, and is the driving factor for thermally induced fire damage. A fire model predicts the temperature and heat transfer through walls based on field predictions, such as radiative and convective heat fl
APA, Harvard, Vancouver, ISO, and other styles
2

Solanki, Pranshoo, and Haiyan Xie. Field-Curing Methods for Evaluating the Strength of Concrete Test Specimens. Illinois Center for Transportation, 2023. http://dx.doi.org/10.36501/0197-9191/23-023.

Full text
Abstract:
The American Association of State Highway and Transportation Officials R 100 standard provides instructions for making and curing concrete test specimens in the field. However, further research is needed to compare the strength of the field-cured specimen with the strength of the actual in-place concrete item. The purpose of this combined laboratory and field study was to evaluate field-curing methods of concrete specimens for estimating the early opening strength of an in-place concrete item. The researchers used one Illinois Department of Transportation class PV mix to cast cylinders, beams,
APA, Harvard, Vancouver, ISO, and other styles
3

Siegel, David A., Ivona Cetinic, Andrew F. Thompson, et al. EXport Processes in the Ocean from RemoTe Sensing (EXPORTS) North Atlantic sensor calibration and intercalibration documents. NASA STI Program and Woods Hole Oceanographic Institution, 2023. http://dx.doi.org/10.1575/1912/66998.

Full text
Abstract:
The following documents collect information regarding the calibration and intercalibration of various sensors that were deployed during the North Atlantic field component of the NASA EXPORTS project (EXPORTS NA), which took place between May 4 and June 1, 2021 (Johnson et al., 2023). The EXPORTS NA campaign was designed to to provide a contrasting end member to the earlier North Pacific field campaign, and focused on carbon export associated with the North Atlantic spring bloom in which gravitational sinking of organic particles, the physical advection and mixing, and active transport by verti
APA, Harvard, Vancouver, ISO, and other styles
4

et al., Chen. L52347 Microstructure Model for Welding Simulations. Pipeline Research Council International, Inc. (PRCI), 2012. https://doi.org/10.55274/r0010457.

Full text
Abstract:
Welding of micro-alloyed, high strength steels such as X100 poses a number of challenges due to, in part, the sensitivity of weld mechanical properties to the welding parameters such as heat input, preheat temperature, etc. For design purpose, it is often required that the mechanical properties of the welds overmatch those of the pipe materials in terms of yield strength, ductility, and toughness. In general, high strength pipe steels exhibit lower strain hardening capability, lower ductility, and increased anisotropy than the traditional lower grade steels. For these steels, when exposed to w
APA, Harvard, Vancouver, ISO, and other styles
5

Buesseler, Buessele, Daniele Bianchi, Fei Chai, et al. Paths forward for exploring ocean iron fertilization. Woods Hole Oceanographic Institution, 2023. http://dx.doi.org/10.1575/1912/67120.

Full text
Abstract:
We need a new way of talking about global warming. UN Secretary General António Guterres underscored this when he said the “era of global boiling” has arrived. Although we have made remarkable progress on a very complex problem over the past thirty years, we have a long way to go before we can keep the global temperature increase to below 2°C relative to the pre-industrial times. Climate models suggest that this next decade is critical if we are to avert the worst consequences of climate change. The world must continue to reduce greenhouse gas emissions, and find ways to adapt and build resili
APA, Harvard, Vancouver, ISO, and other styles
6

ON FIELD-MEASURED VERTICAL TEMPERATURE GRADIENT OF BOX GIRDER IN STEEL BRIDGES. The Hong Kong Institute of Steel Construction, 2022. http://dx.doi.org/10.18057/icass2020.p.320.

Full text
Abstract:
To investigate distribution of the vertical temperature gradient of a closed steel box girder under solar radiation, specifications in four major codes on the vertical temperature gradient of a main girder or steel box girder in China and other countries are first compared. Then, temperature measurement is carried out inside a steel box girder bridge. It was found that under the effect of hot weather and strong solar radiation, the temperature rose rapidly on the deck overlay and reached its maximum at around 14:00, while the maximum temperature of the deck was recorded at around 16:00. Notabl
APA, Harvard, Vancouver, ISO, and other styles
7

NUMERICAL SIMULATION ANALYSIS OF TEMPERATURE FIELD OF BOX-TYPE COMPOSITE WALL. The Hong Kong Institute of Steel Construction, 2022. http://dx.doi.org/10.18057/icass2020.p.321.

Full text
Abstract:
The spatial and temporal characteristics of the internal temperature field of the box-type composite wall have great significance to high temperature mechanical response and fire resistance performance of composite wall subjected to fire. A series of assumptions for the simplified model were made after determining the influence of various thermal parameters, the boundary conditions of surface and the contact conditions. And the finite element software(ABAQUS) was used to establish the temperature field analysis model to conduct nonlinear transient temperature response analysis, then the validi
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Plate temperature field' for particular source types:
Journal articles
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography