To see the other types of publications on this topic, follow the link: Semiconductor oxide compound.

Journal articles on the topic 'Semiconductor oxide compound'

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the top 50 journal articles for your research on the topic 'Semiconductor oxide compound.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Browse journal articles on a wide variety of disciplines and organise your bibliography correctly.

1

Knopp, K. J., R. P. Mirin, K. A. Bertness, K. L. Silverman, and D. H. Christensen. "Compound semiconductor oxide antireflection coatings." Journal of Applied Physics 87, no. 10 (2000): 7169–75. http://dx.doi.org/10.1063/1.372965.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Rachmady, Willy, James Blackwell, Gilbert Dewey, et al. "Surface Preparation and Passivation of III-V Substrates for Future Ultra-High Speed, Low Power Logic Applications." Solid State Phenomena 145-146 (January 2009): 165–67. http://dx.doi.org/10.4028/www.scientific.net/ssp.145-146.165.

Full text
Abstract:
III-V compound semiconductors have been recognized among the potential options for continuing transistor power-performance scaling owing to their ultra high charge carrier mobility. In order to realize their potential in high performance and lower-power digital logic applications, there must be strong gate control and a high Ion-Ioff ratio, achieved by integrating a stable, ultra thin high-K dielectric between the semiconductor and the gate [1, 2]. Unlike Si, which has long benefited from its very stable native oxide, III-V materials suffer from their poor native oxides that cause charge traps
APA, Harvard, Vancouver, ISO, and other styles
3

Li, Jiawei. "Recent Progress of β-Ga2O3 and Transition Metal doped β- Ga2O3 Structure and Properties". Highlights in Science, Engineering and Technology 99 (18 червня 2024): 247–52. http://dx.doi.org/10.54097/er1nze77.

Full text
Abstract:
Oxide semiconductor material formed from oxygen and a metal is a compound semiconductor material. Important oxide semiconductor materials include Cu2O, ZnO, SnO2, Fe2O3, TiO2, ZrO2, CoO, WO3, Ga2O3 and others. Oxide semiconductors have been receiving strong attention and are widely used in different fields such as solar cells and photovoltaic technology. Due to the development of technology, the high-performance techniques demand more from the parts. Semiconductor is an intensively researched substance that can be used in a wide range of technologies. β-Ga2O3 is a metal oxide that has good pro
APA, Harvard, Vancouver, ISO, and other styles
4

John Chelliah, Cyril R. A., and Rajesh Swaminathan. "Current trends in changing the channel in MOSFETs by III–V semiconducting nanostructures." Nanotechnology Reviews 6, no. 6 (2017): 613–23. http://dx.doi.org/10.1515/ntrev-2017-0155.

Full text
Abstract:
AbstractThe quest for high device density in advanced technology nodes makes strain engineering increasingly difficult in the last few decades. The mechanical strain and performance gain has also started to diminish due to aggressive transistor pitch scaling. In order to continue Moore’s law of scaling, it is necessary to find an effective way to enhance carrier transport in scaled dimensions. In this regard, the use of alternative nanomaterials that have superior transport properties for metal-oxide-semiconductor field-effect transistor (MOSFET) channel would be advantageous. Because of the e
APA, Harvard, Vancouver, ISO, and other styles
5

Mao, Tan, Mengchen Liu, Liyuan Lin, Youliang Cheng, and Changqing Fang. "A Study on Doping and Compound of Zinc Oxide Photocatalysts." Polymers 14, no. 21 (2022): 4484. http://dx.doi.org/10.3390/polym14214484.

Full text
Abstract:
As an excellent semiconductor photocatalyst, zinc oxide is widely used in the field of photocatalysis and is regarded as one of the most reliable materials to solve environmental problems. However, because its band gap energy limits the absorption of visible light and reduces the efficiency of catalytic degradation, it needs to be doped with other substances or compounded with other substances and precious metal. This paper summarizes the research on this aspect at home and abroad in recent years, introduces the doping of transition metal ions by zinc oxide, the compounding of zinc oxide with
APA, Harvard, Vancouver, ISO, and other styles
6

Rakhymbekov, Aitbai, Aigul Idrisova, Rosa Saduakasova, Gulmira Nurbosynova, and Meruert Turlybekova. "Preparation of a Semiconductor Film with the Aid of a Superionic." Key Engineering Materials 771 (June 2018): 130–35. http://dx.doi.org/10.4028/www.scientific.net/kem.771.130.

Full text
Abstract:
The actuality of the topic chosen by us lies in the fact that the effect of oxygen on the properties of semiconductors has not been studied sufficiently well, mainly because of the imperfections of methods for controlling the oxygen content in semiconductor materials. Almost in all such materials, oxygen is present either as an uncontrolled impurity or as a doping additive, or, in the case of oxide semiconductors, as in our case with a semiconductor film of vanadium dioxide, is part of the compound. The oxygen contained in the semiconductor film significantly affects the property of the materi
APA, Harvard, Vancouver, ISO, and other styles
7

Nishio, Kenya, Suguru Saito, Yoshiya Hagimoto, and Hayato Iwamoto. "Effect of WET treatment on Group III-V Compound Semiconductor Surface." Solid State Phenomena 282 (August 2018): 43–47. http://dx.doi.org/10.4028/www.scientific.net/ssp.282.43.

Full text
Abstract:
In this work, we investigated interfacial properties of InP, which is a typical group III-V compound used for semiconductors, by using a chemical-treated metal oxide semiconductor (MOS) capacitor. The interfacial properties of InP is more affected by interface state density than the surface roughness and is greatly affected by In2O3in particular. Additionally, we evaluated In2O3growth during 24-hour rinsing and air exposure and found that In2O3on an InP surface grows larger during rinsing than during air exposure. To reduce In2O3, the rinse needs to be optimized.
APA, Harvard, Vancouver, ISO, and other styles
8

Hibi, Hideaki, Masahito Yamaguchi, Naoki Yamamoto, and Fumitaro Ishikawa. "Selective Synthesis of Compound Semiconductor/Oxide Composite Nanowires." Nano Letters 14, no. 12 (2014): 7024–30. http://dx.doi.org/10.1021/nl503385g.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Bennett, Brian R., Mario G. Ancona, and J. Brad Boos. "Compound Semiconductors for Low-Power p-Channel Field-Effect Transistors." MRS Bulletin 34, no. 7 (2009): 530–36. http://dx.doi.org/10.1557/mrs2009.141.

Full text
Abstract:
AbstractResearch in n-channel field-effect transistors based upon III–V compound semiconductors has been very productive over the last 30 years, with successful applications in a variety of high-speed analog circuits. For digital applications, complementary circuits are desirable to minimize static power consumption. Hence, p-channel transistors are also needed. Unfortunately, hole mobilities are generally much lower than electron mobilities for III–V compounds. This article reviews the recent work to enhance hole mobilities in antimonide-based quantum wells. Epitaxial heterostructures have be
APA, Harvard, Vancouver, ISO, and other styles
10

Motoyoshi, Ryosuke, Takeo Oku, Atsushi Suzuki, et al. "Fabrication and Characterization of Copper System Compound Semiconductor Solar Cells." Advances in Materials Science and Engineering 2010 (2010): 1–11. http://dx.doi.org/10.1155/2010/562842.

Full text
Abstract:
Copper system compound semiconductor solar cells were produced by a spin-coating method, and their cell performance and structures were investigated. Copper indium disulfide- (CIS-) based solar cells with titanium dioxide (TiO2) were produced on F-dopedSnO2(FTO). A device based on an FTO/CIS/TiO2structure provided better cell performance compared to that based on FTO/TiO2/CIS structure. Cupric oxide- (CuO-) and cuprous oxide- (Cu2O-) based solar cells with fullerene (C60) were also fabricated on FTO and indium tin oxide (ITO). The microstructure and cell performance of the CuO/C60heterojunctio
APA, Harvard, Vancouver, ISO, and other styles
11

Rajeshwar, Krishnan, Efstathios Meletis, Abhishek Rawat, Fahad Danladi, and Mark C. Hersam. "Ternary Copper Vanadate Semiconductors and Alloys for Energy Applications." ECS Meeting Abstracts MA2024-02, no. 22 (2024): 1911. https://doi.org/10.1149/ma2024-02221911mtgabs.

Full text
Abstract:
Alloys offer a promising avenue for enhancing materials performance, and many examples exist for how Group III-V and II-VI compound semiconductors have revolutionized human life quality, e.g., via devices including lasers, displays, night vision technology, solar cells etc. Unlike the well-studied and technologically advanced Group III-V and Group II-VI compound semiconductor alloys, alloys of ternary metal oxide semiconductors have only recently begun to receive widespread attention. Here, we describe the effect of alkaline earth metal substitution on the optical, electronic, and photoelectro
APA, Harvard, Vancouver, ISO, and other styles
12

Hirschwald, Wolfgang H. "Zinc oxide: an outstanding example of a binary compound semiconductor." Accounts of Chemical Research 18, no. 8 (1985): 228–34. http://dx.doi.org/10.1021/ar00116a001.

Full text
APA, Harvard, Vancouver, ISO, and other styles
13

Wenjie, Zhao, Shi Yunbo, Xiu Debin, Lei Tingping, Feng Qiaohua, and Wang Liquan. "Sensitive properties of In-based compound semiconductor oxide to Cl2gas." Journal of Semiconductors 30, no. 3 (2009): 034010. http://dx.doi.org/10.1088/1674-4926/30/3/034010.

Full text
APA, Harvard, Vancouver, ISO, and other styles
14

Becker, Martin, Angelika Polity, Davar Feili, and Bruno K. Meyer. "Deposition of tin oxides by Ion-Beam-Sputtering." MRS Proceedings 1494 (2012): 153–58. http://dx.doi.org/10.1557/opl.2012.1650.

Full text
Abstract:
ABSTRACTSynthesis of both p-type and n-type oxide semiconductors is required to develop oxide-based electronic devices. Tin monoxide (SnO) recently has received increasing attention as an alternative p-type oxide semiconductor because it is a simple binary compound consisting of abundant elements. Another phase of the tin oxygen system, SnO2, is of great technological interest as transparent electrodes and as heat-reflecting filters. The preparation of tin oxide thin films has been performed by many different procedures. Radio-frequency (RF) ion-thrusters, as designed for propulsion applicatio
APA, Harvard, Vancouver, ISO, and other styles
15

Yeo, Chan Il, Hee Ju Choi, Young Min Song, Seok Jin Kang, and Yong Tak Lee. "A single-material graded refractive index layer for improving the efficiency of III–V triple-junction solar cells." Journal of Materials Chemistry A 3, no. 14 (2015): 7235–40. http://dx.doi.org/10.1039/c4ta06111j.

Full text
Abstract:
We present a single-material titanium oxide (TiO<sub>2</sub>) bi-layer antireflection coating (ARC) produced using oblique angle deposition for improving the power conversion efficiency (PCE) of III–V compound semiconductor triple-junction (TJ) solar cells.
APA, Harvard, Vancouver, ISO, and other styles
16

Mohamed, Abdalla Abdelrahman, and Bedor Mohammed Khairalla. "A Computer Simulation of Lithium Doped in nanosheet zinc oxide." Journal of The Faculty of Science and Technology, no. 6 (January 13, 2021): 110–16. http://dx.doi.org/10.52981/jfst.vi6.615.

Full text
Abstract:
The capabilities of computer through the methodologies of scientific computing used to solve many manufacturing difficulties of semiconductor materials, across all disciplines, because it is low cost and the availability of resources. In this paper, investigation of unique electronic property of zinc oxide sheet, which can be an attractive semiconductor material for many electronic devices applications, is carried out. The electronic structure of zinc oxide surface and the effect of substituting lithium atoms using CRYSTAL06 code showed that the bulk ZnO band gap ≈ 3.3eV which is in good agree
APA, Harvard, Vancouver, ISO, and other styles
17

Journal, Baghdad Science. "Synthesis of Pure Nano semiconductor Oxide ZnO with Different AgNO3 Concentrations." Baghdad Science Journal 14, no. 2 (2017): 379–89. http://dx.doi.org/10.21123/bsj.14.2.379-389.

Full text
Abstract:
Zinc oxide nanoparticles sample is prepared by the precipitation method. This method involves using zinc nitrate and urea in aqueous solution, then (AgNO3) Solution with different concentrations is added. The obtained precipitated compound is structurally characterized by X-ray diffraction (XRD), Scanning electron microscopy (SEM), Atomic force microscopy (AFM) and Fourier transform infrared spectroscopy (FTIR). The average particle size of nanoparticles is around 28nm in pure, the average particle size reaches 26nm with adding AgNO3 (0.05g in100ml =0.002 M) (0.1g in100ml=0.0058M), AgNO3 (0.2g
APA, Harvard, Vancouver, ISO, and other styles
18

Stewart, Anthony D., Brent P. Gila, Cammy R. Abernathy, and S. J. Pearton. "Growth of (SmxGa1−x)2O3 by molecular beam epitaxy." Journal of Vacuum Science & Technology A 40, no. 6 (2022): 062701. http://dx.doi.org/10.1116/6.0002135.

Full text
Abstract:
The (SmxGa1−x)2O3 alloy system is a potential new dielectric for compound semiconductors such as GaAs. Using molecular beam epitaxy under metal-modulated growth conditions, we grew the binary oxide, Sm2O3, at two substrate temperatures (100 and 500 °C) and optimized the structural, morphological, and electrical properties of the films. Decreasing the Sm cell temperature suppressed the formation of the monoclinic phase and promoted the growth of the cubic phase. Next, the ternary oxide, (SmxGa1−x)2O3, was deposited to investigate the effects of Ga incorporation. Optimization experiments were us
APA, Harvard, Vancouver, ISO, and other styles
19

Huang, Yuyang, Yaping Li, Meng Wu, et al. "Electronic structure variations of polar and nonpolar ZnO lattices with nitrogen-ion bombardment using synchrotron-based in situ photoemission and X-ray absorption spectroscopy." Journal of Synchrotron Radiation 27, no. 1 (2020): 83–89. http://dx.doi.org/10.1107/s160057751901381x.

Full text
Abstract:
Surface polarity with different crystal orientations has been demonstrated as a crucial parameter in determining the physical properties and device applications in many transition metal oxide and semiconductor compound systems. The influences of surface polarity on electronic structures in nitrogen-incorporated ZnO lattices have been investigated in the present work. The successful doping of nitrogen atoms in ZnO lattices is suggested by the existence of N-related chemical bonds obtained from X-ray photoelectron spectroscopy analysis where a pronounced N–Zn peak intensity has been observed in
APA, Harvard, Vancouver, ISO, and other styles
20

Zhang, Hua, Yinghao Guo, and Fanli Meng. "Metal Oxide Semiconductor Sensors for Triethylamine Detection: Sensing Performance and Improvements." Chemosensors 10, no. 6 (2022): 231. http://dx.doi.org/10.3390/chemosensors10060231.

Full text
Abstract:
Triethylamine (TEA) is an organic compound that is commonly used in industries, but its volatile, inflammable, corrosive, and toxic nature leads to explosions and tissue damage. A sensitive, accurate, and in situ monitoring of TEA is of great significance to production safety and human health. Metal oxide semiconductors (MOSs) are widely used as gas sensors for volatile organic compounds due to their high bandgap and unique microstructure. This review aims to provide insights into the further development of MOSs by generalizing existing MOSs for TEA detection and measures to improve their sens
APA, Harvard, Vancouver, ISO, and other styles
21

BEL, Steven, Clément Lobre, Sarah Petit, Marc Veillerot, and Giacomo Badano. "Native Oxidation of HgCdTe Compound Semiconductors and Its Impact on Infrared Detectors Performances." ECS Meeting Abstracts MA2024-02, no. 36 (2024): 2529. https://doi.org/10.1149/ma2024-02362529mtgabs.

Full text
Abstract:
The development of high-operating temperature (HOT) infrared imaging systems is motivated by the growing demand to reduce the size, weight, power consumption, and total cost of infrared detectors. HgCdTe photodiodes have unique material properties, making them one of the most promising candidates to produce infrared detectors with background-limited performances at room temperature, as predicted by the "Law 19" photodiode performance metric [1]. However, in state-of-the-art devices, the fraction of anomalous pixel responses increases alongside the detectors' operating temperature and cut-off w
APA, Harvard, Vancouver, ISO, and other styles
22

Moon, Kook Chul, Won-Young Kim, JungUn Na, et al. "P‐4: A New Evaluation System for Metal‐Oxide Compound Semiconductor Film." SID Symposium Digest of Technical Papers 53, no. 1 (2022): 1051–54. http://dx.doi.org/10.1002/sdtp.15679.

Full text
APA, Harvard, Vancouver, ISO, and other styles
23

Lubnow, Andreas, Guang-Ping Tang, Hergo-Heinrich Wehmann, Erwin Peiner, and Andreas Schlachetzki. "Effect of III/V-Compound Epitaxy on Si Metal-Oxide-Semiconductor Circuits." Japanese Journal of Applied Physics 33, Part 1, No. 6A (1994): 3628–34. http://dx.doi.org/10.1143/jjap.33.3628.

Full text
APA, Harvard, Vancouver, ISO, and other styles
24

Yakovyna, V. S. "The impact of laser shock waves on anodic oxide - compound semiconductor interface." Semiconductor Physics, Quantum Electronics and Optoelectronics 4, no. 4 (2001): 283–86. http://dx.doi.org/10.15407/spqeo4.04.283.

Full text
APA, Harvard, Vancouver, ISO, and other styles
25

Suchikova, Yana, Sergii Kovachov, and Ihor Bohdanov. "Formation of oxide crystallites on the porous GaAs surface by electrochemical deposition." Nanomaterials and Nanotechnology 12 (January 2022): 184798042211273. http://dx.doi.org/10.1177/18479804221127307.

Full text
Abstract:
We demonstrate how the formation of octahedral microcrystals of arsenic oxide As2O3 in the form of arsenolite with a size of 200 nm to 10 μm can be initiated by the electrochemical etching method with simultaneous deposition on the surface of substrates with n-GaAs (111). Crystallites were formed on a previously synthesized porous layer of GaAs. To explain the behavior of formation on the surface of the monocrystalline GaAs porous layer and As2O3 crystallites in the electrochemical reaction, we propose a qualitative model based on the decomposition of binary semiconductors in contact with elec
APA, Harvard, Vancouver, ISO, and other styles
26

de Almeida, Juliana, Krishnan Rajeshwar, and Christiane de Arruda Rodrigues. "Synthesis and Photoelectrochemical Properties of Copper Titanate for Pollutant Removal." ECS Meeting Abstracts MA2024-02, no. 59 (2024): 3994. https://doi.org/10.1149/ma2024-02593994mtgabs.

Full text
Abstract:
Copper species are considered one of the materials capable of converting pollutants in add-products values. However, its stability is a challenge when applied in photoelectrocatalytic (PEC) processes. A promissory alternative is to couple copper species with other materials improving their chemical stability, such as TiO2, an p-type semiconductor with excellent charge transfer. The insertion of Cu atoms into the titanium crystal lattice can promote the formation of stable binary copper oxides and/or the production of ternary/quaternary oxides by sharing oxygen between the species1,2. In additi
APA, Harvard, Vancouver, ISO, and other styles
27

Mas'udah, Kusuma Wardhani, Ahmad Taufiq, and Sunaryono Sunaryono. "The Potential of Corncobs in Producing Reduced Graphene Oxide as a Semiconductor Material." Journal of Engineering and Technological Sciences 54, no. 2 (2022): 220201. http://dx.doi.org/10.5614/j.eng.technol.sci.2022.54.2.1.

Full text
Abstract:
A simple chemical approach was developed to synthesize reduced graphene oxide (RGO) from corncob waste through the acid-base method with the addition of PEG-2000 at specific concentrations. The morphology and structure of RGO were characterized by scanning electron microscopy and energy-dispersive X-ray spectroscopy. The process of reduction and quality of RGO were examined carefully with UV-Vis spectroscopy, infrared spectroscopy, and X-ray diffractometry. Based on the treatment and characterization, the diffraction data showed a prominent peak of RGO at a 2-theta position of 24.01°. The exis
APA, Harvard, Vancouver, ISO, and other styles
28

He, Shuyan, Hao Li, and Tuyuanyuan Zhang. "Metal oxide thin film transistor and its active layer materials." Applied and Computational Engineering 7, no. 1 (2023): 161–70. http://dx.doi.org/10.54254/2755-2721/7/20230427.

Full text
Abstract:
Metal oxide thin-film transistors (MOTFTs) have the characteristics of high electron mobility, large-area production, and relatively low fabrication temperature and have received extensive attention as a research hotspot in recent years. Based on a large number of literatures, this paper introduces the typical single-component representative of MOTFT, multi-component compound oxide semiconductor active layer materials such as IZO, IGO, IGZO, etc. At the same time, due to the unique advantages of nanomaterials, material modification is carried out in different dimensions, and six physical and c
APA, Harvard, Vancouver, ISO, and other styles
29

Rucki, A., and C. Lee. "A Copper Leadframe Oxidation Investigation by Electron Energy-Loss Spectroscopy." Microscopy and Microanalysis 6, S2 (2000): 1100–1101. http://dx.doi.org/10.1017/s1431927600037995.

Full text
Abstract:
Copper alloys are widely used as a leadframe (chip carrier) material in plastic packaged semiconductor devices. The oxidation of Cu leadframes during the assembly process can result in poor adhesion between the moulding compound and the die-pad. This often leads to interfacial delamination and contributes to popcorn cracking during the component-board attachment process. The main cause of poor adhesion has been attributed to the weak Cu oxide(s) layer on the leadframe surface. Studies have shown that the moulding compound/leadframe adhesion decreases with increasing oxide thickness.The aim of
APA, Harvard, Vancouver, ISO, and other styles
30

Rajesh, K., L. J. Huang, W. M. Lau, R. Bruce, S. Ingrey, and D. Landheer. "Modification of the GalnAsP(100) surface by oxidation and sulfur passivation." Canadian Journal of Physics 74, S1 (1996): 89–94. http://dx.doi.org/10.1139/p96-839.

Full text
Abstract:
The quaternary III–V compound semiconductor (GaInAsP) is one of the important materials for optoelectronic devices such as long-wavelength semiconductor lasers. Understanding its surface chemistry, which is subjected to oxidation, and sulphur passivation, a widely used passivation technique, is of importance for its use for device fabrication. In this study, modification of the quaternary GaInAsP(100) surfaces was performed by UV/ozone and wet chemical oxidation, dilute HF etching, and sulfur passivation. The surface chemistry and composition of the oxidized, oxide-free, and the sulfur-passiva
APA, Harvard, Vancouver, ISO, and other styles
31

Giardin, M. D., R. Feduzi, A. Manara, et al. "An investigation of the crystalline and electronic structures of a 4:3:3:4 layered Bi–Ca–Sr–Cu oxide." Journal of Materials Research 6, no. 9 (1991): 1838–42. http://dx.doi.org/10.1557/jmr.1991.1838.

Full text
Abstract:
Semiconducting samples of a Bi–Ca–Sr–Cu oxide, having a nominal composition 4:3:3:4, were prepared by melting high purity oxides of the various elements. Superconducting samples were obtained by annealing the semiconducting samples at a temperature close to the melting temperature. Electrical resistivity measurements indicated the presence of two superconducting phases, one with the onset temperature at about 110 K, the other with a significantly lower onset temperature. The presence of this second phase is proven by the x-ray powder diffraction patterns. The crystalline structures of both the
APA, Harvard, Vancouver, ISO, and other styles
32

DAS, P. S., P. K. CHAKRABORTY, BANARJI BEHERA, and R. N. P. CHOUDHARY. "CHARACTERIZATION OF LiPb2V5O15 CERAMICS USING IMPEDANCE SPECTROSCOPY." Modern Physics Letters B 23, no. 05 (2009): 755–64. http://dx.doi.org/10.1142/s0217984909018989.

Full text
Abstract:
The polycrystalline sample of LiPb 2 V 5 O 15 was prepared by a mixed oxide method at low temperature (i.e. 550°C). Preliminary structural analysis confirmed the formation of the compound of an orthorhombic crystal system. The impedance parameters of the material were studied using complex impedance spectroscopy (CIS) in a wide temperature (i.e. 30–450°C) and frequency (i.e. 102–106 Hz) range. From the complex impedance plots, grain/grain boundary effects and relaxation phenomenon were observed above 30°C. Study of electrical conductivity suggests that the compound exhibits the negative temper
APA, Harvard, Vancouver, ISO, and other styles
33

Vaishnav, V. S., S. G. Patel, and J. N. Panchal. "Fabrication and Application of Thin Film Semiconductor Sensors for the Detection of Volatile Organic Compounds." Advanced Materials Research 665 (February 2013): 85–92. http://dx.doi.org/10.4028/www.scientific.net/amr.665.85.

Full text
Abstract:
Volatile Organic Compounds (VOCs) are highly reactive, often mixed with interfering gases and more importantly, their vapours in the gaseous form respond to the gas sensor devices. Oxide semiconductor based thin film gas sensors play vital role in detecting, monitoring and controlling the presence of hazardous and harmful gases in the environment at very low concentration and hence are tested for the detection of harmful or industrially important VOCs. The demand of sensitive as well stable gas/vapour sensors for direct sensing application has increased the importance of In2O3:SnO2 based semic
APA, Harvard, Vancouver, ISO, and other styles
34

Kim, Sung Yoon, Jae Hwa Seo, Young Jun Yoon, et al. "Design and Analysis of CMOS-Compatible III–V Compound Electron–Hole Bilayer Tunneling Field-Effect Transistor for Ultra-Low-Power Applications." Journal of Nanoscience and Nanotechnology 15, no. 10 (2015): 7486–92. http://dx.doi.org/10.1166/jnn.2015.11142.

Full text
Abstract:
In this work, we design and analyze complementarymetal-oxide-semiconductor (CMOS)-compatible III–V compound electron–hole bilayer (EHB) tunneling field-effect transistors (TFETs) by using two-dimensional (2D) technology computer-aided design (TCAD) simulations. A recently proposed EHB TFET exploits a bias-induced band-to-band tunneling (BTBT) across the electron–hole bilayer by an electric field from the top and bottom gates. This is in contrast to conventional planar p+−p−−n TFETs, which utilize BTBT across the source-to-channel junction.We applied III–V compound semiconductor materials to th
APA, Harvard, Vancouver, ISO, and other styles
35

Guo, Qixin. "Control of n-type doping of gallium oxide wide gap compound semiconductor thin films." Impact 2019, no. 10 (2019): 6–8. http://dx.doi.org/10.21820/23987073.2019.10.6.

Full text
Abstract:
Next-generation power electronics is a term that is used to refer to devices of the future that will need to process considerably more energy in order to function than is typical for current electronic devices. For instance, the amounts of power that electric cars will need to process in the future necessitates new methods and techniques, particularly those that permit a minimising of power loss and can dissipate heat efficiently. Professor Qixin Guo is focused on understanding more about next-generation power electronics. He explains that one means of achieving these ambitions is through the
APA, Harvard, Vancouver, ISO, and other styles
36

Tota-Maharaj, K., and P. Paul. "Evaluation of the solar photocatalytic degradation of organochlorine compound trichloroethanoic acid using titanium dioxide and zinc oxide in the Caribbean region." Water Supply 15, no. 3 (2015): 559–68. http://dx.doi.org/10.2166/ws.2015.005.

Full text
Abstract:
Advanced oxidation processes driven by solar energy can be an efficient method in removing organochlorine compounds from river water especially in tropical environments like the Caribbean region. The feasibility of solar photocatalytic degradation of an organochlorine compound, namely trichloroethanoic acid (TCA), which is commonly used in the Caribbean islands of Trinidad and Tobago, was separately assessed using titanium dioxide and zinc oxide as photocatalysts in suspended solution. Overall the prototype solar photoreactor operated and performed efficiently for the photodegradation of TCA.
APA, Harvard, Vancouver, ISO, and other styles
37

Li, Xiaoxin, Yifei Huang, Jie Zeng, et al. "Mobility Improvement of Sol–Gel Method Processed Transparent SnSx Thin Films by Na Doping." Journal of Nanoscience and Nanotechnology 20, no. 8 (2020): 5102–6. http://dx.doi.org/10.1166/jnn.2020.18506.

Full text
Abstract:
The In–Ga–Zn–O oxide semiconductor (a-IGZO) is currently a well-researched and widely used material in the semiconductor industry; however, due to the shortage of indium, new transparent conducting films (TCFs) need to be developed as a substitute of a-IGZO. For this, a new TCF, SnSx (the compound of SnS2 and SnS) nanomaterial using spin-coating method is processed. We systematically investigate the structure, electrical and optical properties of SnSx and the Na doped SnSx nanomaterial films. Through Na doping, Hall electron mobility of the processed material is increased to 59.6 cm2/Vs and it
APA, Harvard, Vancouver, ISO, and other styles
38

Rumyantseva, Marina, Abulkosim Nasriddinov, Valeriy Krivetskiy, and Alexander Gaskov. "Light—Assisted Low Temperature Formaldehyde Detection at Sub-ppm Level Using Metal Oxide Semiconductor Gas Sensors." Proceedings 14, no. 1 (2019): 37. http://dx.doi.org/10.3390/proceedings2019014037.

Full text
APA, Harvard, Vancouver, ISO, and other styles
39

Glynn, Colm, David McNulty, and Colm O'Dwyer. "Solution Deposition and Patterning of Compound Semiconductor Metal Oxide Thin Films and Nanowire Networks." ECS Meeting Abstracts MA2020-02, no. 29 (2020): 1968. http://dx.doi.org/10.1149/ma2020-02291968mtgabs.

Full text
APA, Harvard, Vancouver, ISO, and other styles
40

Xu, Dongsheng, Dapeng Chen, Yajie Xu, et al. "Preparation of II-VI group semiconductor nanowire arrays by dc electrochemical deposition in porous aluminum oxide templates." Pure and Applied Chemistry 72, no. 1-2 (2000): 127–35. http://dx.doi.org/10.1351/pac200072010127.

Full text
Abstract:
II-VI group compound semiconductors such as CdS, CdSe, and CdTe nanowire arrays have been prepared by direct current electrodeposition in porous anodic aluminum oxide template from nonaqueous electrolyte. SEM and TEM results show that these nanowires have a highly anisotropic structure of aligned nanowires with diameters of 15-200 nm, which are consistent with the diameters of the templates used. Electron diffraction and HREM investigations demonstrate that the crystalline structures of these nanowires are uniform hexagonal single crystal. This approach can be used to fabricate single crystal
APA, Harvard, Vancouver, ISO, and other styles
41

Chen, Fang, Ji Long Tang, Guo Jun Liu, et al. "The Surface and Photoluminescence Properties of GaAs Passivated by Wet Chemical Method." Advanced Materials Research 1118 (July 2015): 154–59. http://dx.doi.org/10.4028/www.scientific.net/amr.1118.154.

Full text
Abstract:
The optical and chemical properties of gallium arsenide (GaAs) surfaces treated by ammonium sulfide ((NH4)2S) treatments were studied via low-temperature photoluminescence (PL). From the PL mapping and Atomic Force Microscope (AFM) results, the treatment process by (NH4)2S is quite effective to remove the oxide layer of GaAs.The PL intensity of (NH4)2S-passivated sample was higher than the untreated sample, and the homogeneity of passivated surface was much better. This strategy provides superior promising passivation method for III-V compound semiconductor material in high-speed and optoelect
APA, Harvard, Vancouver, ISO, and other styles
42

Hettick, Mark, Hao Li, Der-Hsien Lien, et al. "Shape-controlled single-crystal growth of InP at low temperatures down to 220 °C." Proceedings of the National Academy of Sciences 117, no. 2 (2019): 902–6. http://dx.doi.org/10.1073/pnas.1915786117.

Full text
Abstract:
III–V compound semiconductors are widely used for electronic and optoelectronic applications. However, interfacing III–Vs with other materials has been fundamentally limited by the high growth temperatures and lattice-match requirements of traditional deposition processes. Recently, we developed the templated liquid-phase (TLP) crystal growth method for enabling direct growth of shape-controlled single-crystal III-Vs on amorphous substrates. Although in theory, the lowest temperature for TLP growth is that of the melting point of the group III metal (e.g., 156.6 °C for indium), previous experi
APA, Harvard, Vancouver, ISO, and other styles
43

Utamuradova, Sh B., Kh S. Daliev, Sh Kh Daliev, S. A. Muzafarova, A. B. Uteniyazova, and A. S. Achilov. "Properties of the transition layer of the structure of the schottky barrier Al-CdTe-Mo." E3S Web of Conferences 462 (2023): 03011. http://dx.doi.org/10.1051/e3sconf/202346203011.

Full text
Abstract:
The composition and morphology of the n-Al2O3 transition oxide layer at the Al-CdTe interface and the n-MoO3 oxide layer at the CdTe–Mo interface were studied in this work. The Schottky barrier was formed by depositing a polycrystalline p-CdTe layer by a gas-transport reaction in a hydrogen flow onto a Mo substrate. The Schottky barrier was obtained by vacuum deposition of an Al metal layer on the p-CdTe surface. X-ray diffraction phase analysis of the Al–p-CdTe–Mo structure made it possible to establish the real structure, which has the real structure of Al– Al2O3–p-CdTe–MoO3. Based on a scan
APA, Harvard, Vancouver, ISO, and other styles
44

Krylov, Igor, Dan Ritter, and Moshe Eizenberg. "The role of the substrate on the dispersion in accumulation in III-V compound semiconductor based metal-oxide-semiconductor gate stacks." Applied Physics Letters 107, no. 10 (2015): 103503. http://dx.doi.org/10.1063/1.4930202.

Full text
APA, Harvard, Vancouver, ISO, and other styles
45

Kuranov, Dmitry Yu, Tatiana A. Andreeva, and Marina E. Bedrina. "Calculation of the ionization potential of zinc and graphene phthalocyaninates on the surface of dielectrics." Vestnik of Saint Petersburg University. Applied Mathematics. Computer Science. Control Processes 18, no. 1 (2022): 52–62. http://dx.doi.org/10.21638/11701/spbu10.2022.104.

Full text
Abstract:
A mathematical model is proposed for calculating the ionization potentials of molecules on the surface of dielectrics in order to quantify changes in the electronic characteristics of materials on a substrate. The semiconductor and photoelectronic properties of nanosystems based on phthalocyanine derivatives are determined by the electronic structure of molecules. Based on the zinc phthalocyaninate molecule ZnC32N8H16, model structures are constructed that increase this molecule by attaching benzene rings ZnC48N8H24, ZnC64N8H32 and a model simulating the film structure of Zn4C120N32 H48. Graph
APA, Harvard, Vancouver, ISO, and other styles
46

Alanazi, Abdullah K., Hala M. Abo-Dief, Zeid A. Alothman, Ashraf T. Mohamed, Tanay Pramanik, and Saad H. Alotaibi. "Effect of Plant Nanocellulose Electrolyte, Zinc Oxide Nanoparticles, and Nano-Chlorophyll Sensitiser on the Dye-Sensitised Solar Cell Performance." Crystals 12, no. 12 (2022): 1771. http://dx.doi.org/10.3390/cryst12121771.

Full text
Abstract:
Owing to ecological concerns and the rapid increase in fossil fuel consumption, sustainable and efficient generation technologies are being developed. The present work aimed at manufacturing DSSC that is based on natural elements for converting the sun energy into electrical energy. ZnO nano materials are used in solar cells as binary compound semiconductor according to their stability, better conductivity, excellent mobility, the best affinity of electrons, and lower cost compared to other semiconductors. Recently, nanocellulose has shown potential as an advanced nanomaterial used in electroc
APA, Harvard, Vancouver, ISO, and other styles
47

Noorikalkenari, Hassan, and Karim bin Deraman. "Nanostructure of Al-ZnO Thin Films on ITO/Glass Substrate Prepared via Sol-Gel Spin Coating Process." Solid State Phenomena 268 (October 2017): 279–83. http://dx.doi.org/10.4028/www.scientific.net/ssp.268.279.

Full text
Abstract:
Solar energy is probably the most important source of renewable energy available today. ZnO is a potential material for the fabrication solar cell. Zinc oxide (ZnO) nano-structure semiconductors have been recently gained much attention in the electronic and optical device applications. ZnO is a compound semiconductor, which has a high extention band gap (E= 3.37 eV) at room temperature (RT) with a Wurtzite crystal structure. In particular ZnO can be employed as the transparent conducting oxide (TCO) in solar cell applications due to its high productivity, non-toxic, low cost, and excellent ele
APA, Harvard, Vancouver, ISO, and other styles
48

Gómez Toledo, Marianela, Sara Lopez Paz, Susana Garcia Martin та Elena Arroyo-de Dompablo. "Computational Investigation of the Potential SOFC Air Electrode YSr2Cu2FeO8-Δ". ECS Meeting Abstracts MA2023-01, № 54 (2023): 78. http://dx.doi.org/10.1149/ma2023-015478mtgabs.

Full text
Abstract:
YBaCuO-type oxides of the YSr2Cu2MO8-δ (M = Co, Fe) systems were previously studied as air electrodes for SOFCs1 and more recently have attracted great attention due to the electrocatalitic properties reported on YSr2Cu2FeO8-δ 2 and La1.5Ba1.5Cu3O7± δ.3 The compound YSr2Cu2FeO7.56 is a p-type semiconductor, mixed valence Fe3+/Fe4+ and Cu2+/Cu3+ oxide, which exhibits an interesting electrochemical behavior associated to catalytic activity in the oxygen reduction reaction (ORR), being a potential air-electrode for solid oxide fuel cells (SOFCs) 2. In this contribution we present a computational
APA, Harvard, Vancouver, ISO, and other styles
49

Guan, Hua Nan, De Fu Chi, and Jia Yu. "Photoelectrochemical Acetylcholinesterase Biosensor Incorporating Zinc Oxide Nanoparticles." Advanced Materials Research 183-185 (January 2011): 1701–6. http://dx.doi.org/10.4028/www.scientific.net/amr.183-185.1701.

Full text
Abstract:
A novel photoelectrochemical biosensor incorporating nanosized ZnO semiconductor crystals with enzyme to enhance photochemical reaction has been investigated. In this work, the ZnO nanoparticles and acetylcholinesterase (AChE) were immobilized on Pt electrode by chitosan (CHI) via layer-by-layer technique (LbL) to fabricate a biological-inorganic hybrid system. Micrographs of (ZnO/CHI/AChE) films were obtained by scanning electron microscope, and photoelectrochemical properties of the resulting biosensors were measured by a three electrodes system and an ultraviolet lamp. Under ultraviolet lig
APA, Harvard, Vancouver, ISO, and other styles
50

Melitz, W., J. B. Clemens, J. Shen, et al. "Scanning Probe Microscopy Imaging before and after Atomic Layer Oxide Deposition on a Compound Semiconductor Surface." Solid State Phenomena 187 (April 2012): 9–10. http://dx.doi.org/10.4028/www.scientific.net/ssp.187.9.

Full text
Abstract:
The megasonic cleaning efficiency is evaluated as a function of the angle of incidence of acoustic waves on a Si wafer. Acoustic Schlichting streaming alone is not able to remove nanoparticles smaller than 400 nm. It is shown that oscillating or collapsing behavior of bubbles are responsible for removing nanoparticles smaller than 400 nm during a cleaning process with ultrasound. Optimal particle removal efficiency is obtained around the angle of acoustic transmission of the silicon wafer.
APA, Harvard, Vancouver, ISO, and other styles
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!