Log in

Relevant bibliographies by topics / Sheet tube

Contents

Journal articles
Dissertations / Theses
Books
Book chapters
Conference papers
Reports

Academic literature on the topic 'Sheet tube'

Author: Grafiati

Published: 2 June 2025

Last updated: 31 July 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Sheet tube.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Sheet tube"

1

Xu, Jun Feng, and Jian Ping Ye. "Structure Analysis on Tube-Sheets and Heat-Transfer Tubes of PWR Steam Generator." Advanced Materials Research 461 (February 2012): 421–24. http://dx.doi.org/10.4028/www.scientific.net/amr.461.421.

Full text

Abstract:

The heat-transfer tubes and tube-sheets are the most complicated pressure parts in PWR steam generator. For analyzing the stress of heat-transfer tubes and tube-sheets, the geometry model of heat-transfer tubes and tube-sheet was constructed. The finite element grids were generated by ANSYS. According to operating temperature, the temperature field and temperature stress were calculated with ANSYS. The results show that the maximum stress is located on the inner wall of juncture of heat-transfer tubes and tube-sheet. According to the operating conditions of heat-transfer tubes and tube-sheet,

APA, Harvard, Vancouver, ISO, and other styles

2

Alves, Luis M., Rafael M. Afonso, and Paulo A. F. Martins. "New Joining Concepts for Self-Pierce Riveting." Key Engineering Materials 883 (April 2021): 119–26. http://dx.doi.org/10.4028/www.scientific.net/kem.883.119.

Full text

Abstract:

This paper is focused on innovative self-pierce riveting concepts to produce invisible joints in sheet-sheet and tube-sheet connections. The common element to these two different types of joints is the use of tubular rivets with chamfered ends, which are accessories in the case of sheet-sheet joints and constitutive (structural) elements in the case of tube-sheet joints. The presentation draws from the deformation mechanics of double-sided self-pierce riveting for producing lap joints in overlapped sheets to the development of self-pierce riveting of tubes to sheets, which is a new joining by

APA, Harvard, Vancouver, ISO, and other styles

3

Alves, Luis M., Rafael M. Afonso, Carlos M. A. Silva, and Paulo A. F. Martins. "Joining by Forming of Tubes to Sheets with Counterbored Holes." Key Engineering Materials 767 (April 2018): 421–28. http://dx.doi.org/10.4028/www.scientific.net/kem.767.421.

Full text

Abstract:

This paper presents a new joining by forming process for connecting tubes to sheets. The process consists of forming an annular flange with rectangular cross section by partial sheet-bulk of the tube wall thickness and performing the mechanical interlock by upsetting the free tube end against a flat-bottomed (counterbored) sheet hole. The presentation identifies the variables and the workability limits of the process and includes an analytical model to assist readers in the design of the new joints. The new proposed joining by forming process and the corresponding analytical model are validate

APA, Harvard, Vancouver, ISO, and other styles

4

Apte, G. D. "Tube To Tube Sheet Welds." Indian Welding Journal 26, no. 2 (1993): 12. http://dx.doi.org/10.22486/iwj.v26i2.148272.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Cheng, C. Z., and G. S. Choe. "Formation of Thin Current Sheets in the Solar Atmosphere." International Astronomical Union Colloquium 167 (1998): 115–18. http://dx.doi.org/10.1017/s0252921100047400.

Full text

Abstract:

AbstractIn a two-dimensional quadrupolar magnetic field geometry, it is demonstrated that various magnetohydrostatic equilibrium field configurations containing current sheets can be formed either by changes in thermal properties or by footpoint displacement. The shape of current sheets depends on the mass distribution in flux tubes. If the mass per flux tube is maximum at the center of the low-lying bipolar arcades, a current sheet is formed between these two arcades along the separatrix line as the plasma temperature (or the shearing footpoint displacement) is increased above a critical valu

APA, Harvard, Vancouver, ISO, and other styles

6

Tokarev, Andrey Sergeevich, Denis Vladimirovich Karetnikov, Rif Garifovich Rizvanov, Ayrat Minnulovich Fayrushin, and Mars Zul'fatovich Zaripov. "Assessment of the Stress-Strain State of a Tube Sheet of the Heat Exchanger at Rotary Friction Welding Application." Materials Science Forum 991 (May 2020): 70–76. http://dx.doi.org/10.4028/www.scientific.net/msf.991.70.

Full text

Abstract:

The aim of the study described in this paper is to assess the effect of forces acting on the tube sheet during friction welding on the stress-strain state of the tube sheet.For this, we calculated the stresses and displacements arising in the tube sheet during friction welding. The calculations were carried out in the ANSYS (finite element analysis software package). To carry out the calculations, solid-state models of tube sheets with diameters of 400, 600, 800, 1000, 1200, 1400 mm and thicknesses of 30, 40, 50, 60, 70 mm were created. The diameter of the holes for the heat exchange tubes was

APA, Harvard, Vancouver, ISO, and other styles

7

Alves, Luis M., Rafael M. Afonso, Frederico L. R. Silva, and Paulo A. F. Martins. "Deformation-Assisted Joining of Sheets to Tubes by Annular Sheet Squeezing." Materials 12, no. 23 (2019): 3909. http://dx.doi.org/10.3390/ma12233909.

Full text

Abstract:

This paper is built upon the deformation-assisted joining of sheets to tubes, away from the tube ends, by means of a new process developed by the authors. The process is based on mechanical joining by means of form-fit joints that are obtained by annular squeezing (compression) of the sheet surfaces adjacent to the tubes. The concept is different from the fixing of sheets to tubes by applying direct loading on the tubes, as is currently done in existing deformation-assisted joining solutions. The process is carried out at room temperature and its development is a contribution towards ecologica

APA, Harvard, Vancouver, ISO, and other styles

8

Alves, Luis M., Tiago J. Reis, Rafael M. Afonso, and Paulo A. F. Martins. "Single-Stroke Attachment of Sheets to Tube Ends Made from Dissimilar Materials." Materials 14, no. 4 (2021): 815. http://dx.doi.org/10.3390/ma14040815.

Full text

Abstract:

This paper presents a new joining method by a forming process for attaching sheets to tube ends. The process consists of two different forming stages carried out sequentially in a single stroke. Firstly, the free tube end is flared by compression with a contoured die, then is squeezed (indented) against the sheet surface to create a mechanical interlocking. The new process is carried out at an ambient temperature and, in contrast to existing joining by forming operations based on tube expansion, it avoids seal welds, tube protrusions above the sheet surfaces, and machining of grooves on the sh

APA, Harvard, Vancouver, ISO, and other styles

9

Geiger, Manfred, Marion Merklein, and Massimo Cojutti. "Integrated Tube and Double Sheet Hydroforming Technology - Optimised Process for the Production of a Complex Part." Key Engineering Materials 344 (July 2007): 477–84. http://dx.doi.org/10.4028/www.scientific.net/kem.344.477.

Full text

Abstract:

The possibility to produce lightweight components with a complex geometry enhanced, in the last decades, the industrial application of the tube hydroforming and, more recently and restricted to specific industrial fields, of the sheet hydroforming technology. The integration in one tool of a tube and a double sheet hydroforming process represents an innovative technology which further emphasises the advantages offered by hydroforming in terms of costs reduction and complexity of the manufactured part. This paper describes the design and the construction of a complex hollow part resulting from

APA, Harvard, Vancouver, ISO, and other styles

10

Er, Berfin, and Taylan M. Daş. "COMPARISON OF ORBITAL AND MANUAL WELDING FOR MANUFACTURING STAINLESS STEEL HEAT EXCHANGER." International Journal of Advanced Natural Sciences and Engineering Researches 7, no. 6 (2023): 358–62. http://dx.doi.org/10.59287/ijanser.1173.

Full text

Abstract:

The main purpose of this study, the fabrication of tube-to-tube sheet welds ofan acid cooler exchanger, which is produced with stainless steel material, was examined usingdifferent welding methods. The tubes were subjected to two different welding methods usinga tungsten electrode. In orbital welding, the machine places the tube on a mandrel andautomatically performs the welding based on the manually inputted tube diameter. At the endof each tube weld, the mandrel is transferred to the next tube by the welder. In manualwelding, the entire tube-to-tube sheet weld is performed by the welder. Wel

APA, Harvard, Vancouver, ISO, and other styles

More sources

Dissertations / Theses on the topic "Sheet tube"

1

Kilfoil, Leo Joseph. "In-plane plane strain testing to evaluate formability of sheet steels used in tubular products." Thesis, Kingston, Ont. : [s.n.], 2007. http://hdl.handle.net/1974/731.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Behseta, Khosrow. "Design by analysis of a fixed tube sheet heat exchanger subject to in-phase proportional loading." Thesis, University of Strathclyde, 2014. http://oleg.lib.strath.ac.uk:80/R/?func=dbin-jump-full&object_id=25276.

Full text

Abstract:

The integrity of the tubesheet to shell junction zone of a fixed tubesheet reactor subject to in phase proportional pressure and temperature loading, and under reduced thickness, has been investigated by applying various failure theories and in accordance to design by analysis rules through considering various material hardening parameters. Results of an elastic FE analysis for reduced tubesheet and shell thicknesses at the junction of the shell to tubesheet indicates that the junction zone is subject to large stresses. It is shown that, junction stresses are formed as a result of combined act

APA, Harvard, Vancouver, ISO, and other styles

3

Amin, M. M., B. Bina, A. Rashidi, and H. Pourzamani. "Using of a New Carbon Nano Tube Version in Sheet Shape for Water and Wastewater Treatment." Thesis, Sumy State University, 2013. http://essuir.sumdu.edu.ua/handle/123456789/35085.

Full text

Abstract:

Removal of xylene (a toxic compound) from aqueous solution by modified multi wall carbon nano tubes (MWCNT) via silica as sheeted carbon nanotube (SCNT) was evaluated. The physicochemical properties of MWCNT such as structure and availability surface were improved due to convert tubes into sheets that cause significantly increase in xylene adsorption. The equilibrium amount (qe (mg/g)) in nano material's dose of 1g/l, xylene concentration of 10mg/l, contact time of 10min, and pH 7, for SCNT (qe 9.8 mg/g) was higher than single wall carbon nano tubes (SWCNT) (qe 9.2 mg/g) and MWCNT (qe 8.9

APA, Harvard, Vancouver, ISO, and other styles

4

Jirathearanat, Suwat. "Advanced methods for finite element simulation for part and process design in tube hydroforming." Connect to this title online, 2004. http://rave.ohiolink.edu/etdc/view?acc%5Fnum=osu1071878178.

Full text

Abstract:

Thesis (Ph. D.)--Ohio State University, 2004.<br>Title from first page of PDF file. Document formatted into pages; contains xxv, 222 p.; also includes graphics (some color). Includes bibliographical references (p. 185-191).

APA, Harvard, Vancouver, ISO, and other styles

5

Damasco, Astrid. "Soldagem a ponto por resistencia eletrica de juntas de chapa/chapa e chapa/tubo de aço de baixo carbono com diferentes composições quimicas, espessuras e revestimentos." [s.n.], 1995. http://repositorio.unicamp.br/jspui/handle/REPOSIP/263209.

Full text

Abstract:

Orientador: Itamar Ferreira<br>Tese (doutorado) - Universidade Estadual de Campinas. Faculdade de Engenharia Mecanica<br>Made available in DSpace on 2018-07-26T22:44:31Z (GMT). No. of bitstreams: 1 Damasco_Astrid_D.pdf: 55690110 bytes, checksum: 6c2d5f5f7cbef8c9f338896b128300d0 (MD5) Previous issue date: 1995<br>Resumo: A motivação deste trabalho surgiu do fato da indústria automobilística usar em larga escala o processo de soldagem a ponto por resistência elétrica para a produção de juntas de chapa/chapa e de chapa/tubo com diferentes espessuras, revestimentos e composição química, sendo qu

APA, Harvard, Vancouver, ISO, and other styles

6

Michieletto, Francesco. "Innovative forming processes of aluminium alloys sheets and tubes at elevated temperature." Doctoral thesis, Università degli studi di Padova, 2016. http://hdl.handle.net/11577/3424956.

Full text

Abstract:

In the last two decades the international community has been looking for solutions to preserve the environment, and in particular the atmosphere, from the CO2 emissions through the car exhausts, considered one of the main responsible of the greenhouse effect and, therefore, of the Earth temperature increase. Rules and limits were fixed in the 1997 with the Kyoto Protocol that entered in force in 2005, by which the international community signed the legal responsibility for producing vehicles with CO2 emission limited to 95g/km to be reached in 2020. The production of cars using lightweight mat

APA, Harvard, Vancouver, ISO, and other styles

7

Allanson, Oliver Douglas. "Theory of one-dimensional Vlasov-Maxwell equilibria : with applications to collisionless current sheets and flux tubes." Thesis, University of St Andrews, 2017. http://hdl.handle.net/10023/11916.

Full text

Abstract:

Vlasov-Maxwell equilibria are characterised by the self-consistent descriptions of the steady-states of collisionless plasmas in particle phase-space, and balanced macroscopic forces. We study the theory of Vlasov-Maxwell equilibria in one spatial dimension, as well as its application to current sheet and flux tube models. The ‘inverse problem' is that of determining a Vlasov-Maxwell equilibrium distribution function self-consistent with a given magnetic field. We develop the theory of inversion using expansions in Hermite polynomial functions of the canonical momenta. Sufficient conditions fo

APA, Harvard, Vancouver, ISO, and other styles

8

Švihel, Miroslav. "Mezivýměník tepla primárního okruhu reaktoru ESFR." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2012. http://www.nusl.cz/ntk/nusl-230371.

Full text

Abstract:

The thesis is mainly focused on the design of the intermediate heat exchanger primary circuit of the reactor ESFR. Heat exchanger is calculated heat, hydraulic and strength and is finally processed part drawings. There are designed the basic dimensions of the tube bundle and container heat exchanger. There are included an overview of concepts and so far used types IHX at the nuclear power plants with fast reactors. There are also mentioned basic parameters of the project ESFR and evaluated the safety and operational reliability of the heat exchanger.

APA, Harvard, Vancouver, ISO, and other styles

9

Winder, Brian Geoffrey. "Achieving Complex Motion with Fundamental Components for Lamina Emergent Mechanisms." Diss., CLICK HERE for online access, 2008. http://contentdm.lib.byu.edu/ETD/image/etd2279.pdf.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

Carriere, JARRETT. "THE DEVELOPMENT AND APPLICATION OF A SIMPLIFIED THERMAL PERFORMANCE EQUATION FOR A SHEET-AND-TUBE PHOTOVOLTAIC THERMAL COMBI-PANEL." Thesis, 2013. http://hdl.handle.net/1974/7755.

Full text

Abstract:

PV/Thermal technology is the combination of solar thermal and photovoltaics - two mature and widely understood technologies. Combining the two technologies complicates existing standardized rating procedures and performance modeling methods. Currently a standardized performance test method does not exist for PV/Thermal (PV/T) panels. Existing and developing PV/T panels are commonly tested using separate standardized solar thermal and photovoltaic test procedures. Solar thermal performance is rated in terms of temperature difference whereas photovoltaic performance is dependent on absolute temp

APA, Harvard, Vancouver, ISO, and other styles

More sources

Books on the topic "Sheet tube"

1

Marcus, Maeva. Truman and the steel seizure case: The limits of presidential power. Duke University Press, 1994.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

2

Bajer, K., and H. K. Moffatt, eds. Tubes, Sheets and Singularities in Fluid Dynamics. Springer Netherlands, 2002. http://dx.doi.org/10.1007/0-306-48420-x.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Palmer, Sue. Tune into sounds ; and the big abc book: Photocopiable activity sheets. Ginn, 1998.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

4

Powell, D. C. Author. Manipulation of Thermoplastic Sheet, Rod and Tube. Creative Media Partners, LLC, 2021.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

5

Báez, Gabriel Centeno, and Maria Beatriz Silva, eds. Tube and Sheet Metal Forming Processes and Applications. MDPI, 2022. http://dx.doi.org/10.3390/books978-3-0365-4333-8.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Music Sheet: Despiable Me Mi. ni. ons Bob Chillaxin in Tube Graphic. Independently Published, 2021.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

7

The 2006-2011 World Outlook for Alloy Steel Blooms, Billets, Sheet Bars, Tube Rounds, and Skelp. Icon Group International, Inc., 2005.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

8

Parker, Philip M. The 2007-2012 World Outlook for Alloy Steel Blooms, Billets, Sheet Bars, Tube Rounds, and Skelp. ICON Group International, Inc., 2006.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

9

The 2006-2011 World Outlook for Stainless Steel Blooms, Billets, Slabs, Sheet Bars, Tube Rounds, and Skelp. Icon Group International, Inc., 2005.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

10

Parker, Philip M. The 2007-2012 World Outlook for Stainless Steel Blooms, Billets, Slabs, Sheet Bars, Tube Rounds, and Skelp. ICON Group International, Inc., 2006.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

More sources

Book chapters on the topic "Sheet tube"

1

Abe, Y., J. Watanabe, and Kenichiro Mori. "Stamping of One-Piece Automobile Steel Wheels from Tube." In Sheet Metal 2007. Trans Tech Publications Ltd., 2007. http://dx.doi.org/10.4028/0-87849-437-5.427.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Altan, Taylan, Serhat Kaya, and Yingyot Aue-u-Ian. "Forming Al and Mg Alloy Sheet and Tube at Elevated Temperatures." In Sheet Metal 2007. Trans Tech Publications Ltd., 2007. http://dx.doi.org/10.4028/0-87849-437-5.317.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Altan, Taylan, H. Palaniswamy, G. Ambrogio, and Yingyot Aue-u-Ian. "Tube and Sheet Hydroforming-Advances in Material Modeling, Tooling and Process Simulation." In Sheet Metal 2005. Trans Tech Publications Ltd., 2005. http://dx.doi.org/10.4028/0-87849-972-5.1.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Loh-Mousavi, M., Kenichiro Mori, K. Hayashi, and M. Bakhshi Jooybari. "Improvement of Filling of Die Corners in Box-Shaped Tube Hydroforming by Control of Wrinkling." In Sheet Metal 2007. Trans Tech Publications Ltd., 2007. http://dx.doi.org/10.4028/0-87849-437-5.461.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Geiger, Manfred, P. Dal Bó, and J. Hecht. "Improvement of Formability in Tube Hydroforming by Reduction of Friction with a High Viscous Fluid Flow." In Sheet Metal 2005. Trans Tech Publications Ltd., 2005. http://dx.doi.org/10.4028/0-87849-972-5.369.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Geiger, Manfred, Marion Merklein, and Massimo Cojutti. "Integrated Tube and Double Sheet Hydroforming Technology - Optimised Process for the Production of a Complex Part." In Sheet Metal 2007. Trans Tech Publications Ltd., 2007. http://dx.doi.org/10.4028/0-87849-437-5.477.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

Zhang, Shi-Hong, Da-Yong Chen, Yong Xu, and Yan Ma. "Robust Hydroforming Technologies to Enhance the Formability of Sheet and Tube." In Forming the Future. Springer International Publishing, 2021. http://dx.doi.org/10.1007/978-3-030-75381-8_30.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

Tokarev, A. S., D. V. Karetnikov, and A. M. Fayrushin. "Determining Optimal Geometric Dimensions of Alternative Design Elements of Rolled and Welded Tube-to-Tube Sheet Joints." In Lecture Notes in Mechanical Engineering. Springer International Publishing, 2021. http://dx.doi.org/10.1007/978-3-030-54814-8_28.

Full text

APA, Harvard, Vancouver, ISO, and other styles

9

Landeg, D., M. Philpott, I. Smith, A. Smith, N. Cowperthwaite, and D. Youngs. "The Laser Sheet as a Quantitative Diagnostic Tool in Shock Tube Experiments." In Shock Waves @ Marseille IV. Springer Berlin Heidelberg, 1995. http://dx.doi.org/10.1007/978-3-642-79532-9_48.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

Ge, Yu, Yanling Xu, Huanwei Yu, Chao Chen, and Shanben Chen. "A Method for Detecting Central Coordinates of Girth Welds Based on Inverse Compositional AAM in Tube-Tube Sheet Welding." In Transactions on Intelligent Welding Manufacturing. Springer Singapore, 2019. http://dx.doi.org/10.1007/978-981-13-7418-0_4.

Full text

APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Sheet tube"

1

Bala, Prabhu, and Krishnan Sivaraman. "Dissimilar Tube-to-Tube Sheet Welding Challenges - A Case Study." In CONFERENCE 2024. AMPP, 2024. https://doi.org/10.5006/c2024-21022.

Full text

Abstract:

Abstract A heat exchanger is a device used to transfer heat between two or more fluids and it is an integral part of any oil and gas refinery. Tube-to-tube sheet welding is the most critical activity in fabricating this equipment [1]. There are many factors which needs to be considered to produce a highly reliable weld joint. These factors include the type of the joint, weld joint design, selection of suitable filler wire, and robust inspection plan deployed during fabrication [1]. The task of selecting a suitable filler wire becomes much more challenging when the heat exchanger consists of di

APA, Harvard, Vancouver, ISO, and other styles

2

Xie, Jeffrey, Katy Yazdanfar, Grant Anning, Tyler Rockwell, and Aizaz Ahmed. "Corrosion of a Vertical Shell and Tube Heat Exchanger." In CORROSION 2015. NACE International, 2015. https://doi.org/10.5006/c2015-05473.

Full text

Abstract:

Abstract Inspection revealed severe corrosion of heat exchanger tubes after a short period of service, approximately 2.5 years. A pattern was discovered in comparing metal loss between tubes that were blocked from hot process vapor flow (found to be clogged tubes by polymeric materials), versus the tubes with the most severe wall loss where hot process vapor continued to flow. An investigation was conducted to understand the severe corrosion and its mechanisms. Compared to the internal process side, corrosion was found dominantly on the external cooling water side (shell side of the bundle), w

APA, Harvard, Vancouver, ISO, and other styles

3

Ayyar, Sameer, Mahmood Al-Ridy, Farhat Choudhary, Adi Alammari, Itoro Akrasi, and Al-Mothanna Serhani. "Weld Jointing Influence on Boiler Tube Sheet Integrity." In MPWT 2019. NACE International, 2019. https://doi.org/10.5006/mpwt19-14366.

Full text

Abstract:

Abstract Boiler system is one of the most critical systems for a utility plant. A utility plant had experienced high percentages of boiler downtime owing to boiler tube sheet cracking failures. Investigations carried out revealed high stress at the tube-to-tube sheet joint in the boiler fire-side entrance. Tube-to-tube sheet joints at the boiler fire-side entrance had been fabricated by strength welding and without any expansion. The strength welded joint had created undue stress leading to cracking of the weld joint by thermal expansion. A higher quality expanded joint consisting of expanding

APA, Harvard, Vancouver, ISO, and other styles

4

Onishi, Kozo, Masaya Yano, Takahisa Hoshika, and Takumi Haruna. "Results of an Investigation into the Localized Hydrogen Embrittlement of Titanium Heat Exchanger Tubes in a Wastewater Environment." In CORROSION 2007. NACE International, 2007. https://doi.org/10.5006/c2007-07200.

Full text

Abstract:

Abstract Titanium heat exchanger tubes used in a wastewater environment at about 150 C for about seven years have been investigated. As can be predicted, no corrosion was observed on the inner surface of the tubes, but titanium hydrides were locally formed on the wastewater side (i.e., outer surface) of the tube. Most of titanium hydrides on the outer surface were observed on the outer surface of the tube contacted with the baffle plate and the tube sheet. Therefore, it is suggested that hydrogen generates and absorbs at the outer surface of the tubes contacted with the plate and the sheet. A

APA, Harvard, Vancouver, ISO, and other styles

5

Xu, Biying, Xuehe Zhang, Xuan Yu, et al. "Motion Planning for Steam Generator Tube Sheet Quadruped Maintenance Robot." In 2024 IEEE International Conference on Mechatronics and Automation (ICMA). IEEE, 2024. http://dx.doi.org/10.1109/icma61710.2024.10633110.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Cayla, O., P. Combrade, Ph Malagola, and G. Slama. "Laboratory Investigations on the IGA of Alloy 600 Tubes." In CORROSION 1985. NACE International, 1985. https://doi.org/10.5006/c1985-85090.

Full text

Abstract:

Some steam generators suffered severe InterGranular Attack (IGA) on the outer surfaces of alloy 600 tubes, within the tube-tube sheet crevice or inside the sludge pile1,2. IGA essentially occurred in plants cooled by river water and is often associated with change in secondary water treatment from phosphate to AVT1,2.

APA, Harvard, Vancouver, ISO, and other styles

7

Stenvall, P., and M. Holmquist. "New Hyper Duplex Stainless Steel Welding Material for Improved Weld Performance." In CORROSION 2007. NACE International, 2007. https://doi.org/10.5006/c2007-07190.

Full text

Abstract:

Abstract With the development of new high performance stainless steel grades comes the need for more advanced welding materials. Investigations of welds produced using the austenitic-ferritic welding material 27.9.5L is presented. Properties of all-weld metal as well as that of butt welds of the newly developed high alloyed duplex grade UNS S32707 (PRE number 49) are given. Documentation of tube-to-tube sheet welds in tube sheets of various stainless alloys is also presented and discussed. In particular, use of this welding material for joining the grade UNS S32707 for obtaining optimum corros

APA, Harvard, Vancouver, ISO, and other styles

8

Scott, Arthur C., and Ralph A. Woods. "“Long-Life” Aluminum Brazing Alloys for Automobile Radiators––A Ten-Year Retrospective." In CORROSION 1998. NACE International, 1998. https://doi.org/10.5006/c1998-98544.

Full text

Abstract:

Abstract A class of corrosion-resistant brazing sheet materials, generally referred to as “long-life alloys,” has been in widespread use in brazed aluminum automobile radiators for over ten years. “K319” tube material was initially introduced in 1986 to address the problem of road-salt-induced, outside-in corrosion of tubes in vacuum-brazed aluminum radiators. The development history, metallurgy, and field performance of long-life radiator brazing sheet are reviewed. This material utilizes the familiar sacrificial layer concept to improve corrosion resistance; however, it is unusual in that th

APA, Harvard, Vancouver, ISO, and other styles

9

Nadeem, M. K., S. Wang, J. Latif, B. Ali, and Y. Gong. "Design and Simulation of Sheet Electron Beam for Gridless Inductive Output Tube." In 2024 IEEE International Conference on Plasma Science (ICOPS). IEEE, 2024. http://dx.doi.org/10.1109/icops58192.2024.10626067.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

Ma, Shaochen, Guoxiang Shu, Xinlun Xie, et al. "Design of a Dual Sheet Beam Electron Gun for THz Traveling Wave Tube." In 2024 Joint International Vacuum Electronics Conference and International Vacuum Electron Sources Conference (IVEC + IVESC). IEEE, 2024. http://dx.doi.org/10.1109/ivecivesc60838.2024.10694898.

Full text

APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Sheet tube"

1

Hayner, G. O., and T. L. Hardt. TMI-2 B-loop steam generator tube sheet loose debris examination and analysis. Office of Scientific and Technical Information (OSTI), 1989. http://dx.doi.org/10.2172/5850717.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Bhattarai, Rabin, Yufan Zhang, and Jacob Wood. Evaluation of Various Perimeter Barrier Products. Illinois Center for Transportation, 2021. http://dx.doi.org/10.36501/0197-9191/21-009.

Full text

Abstract:

Construction activities entail substantial disturbance of topsoil and vegetative cover. As a result, stormwater runoff and erosion rates are increased significantly. If the soil erosion and subsequently generated sediment are not contained within the site, they would have a negative off-site impact as well as a detrimental influence on the receiving water body. In this study, replicable large-scale tests were used to analyze the ability of products to prevent sediment from exiting the perimeter of a site via sheet flow. The goal of these tests was to compare products to examine how well they r

APA, Harvard, Vancouver, ISO, and other styles

3

Hoelzer, David T., Kinga A. Unocic, Wei Tang, and Zhili Feng. Status of Joining Thin Sheet and Thin Wall Tubes of 14YWT. Office of Scientific and Technical Information (OSTI), 2015. http://dx.doi.org/10.2172/1252141.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Dryepondt, Sebastien N., Caleb Massey, Maxim N. Gussev, Kory Linton, and Kurt Terrani. Tensile Strength and Steam Oxidation Resistance of ODS FeCrAl Sheet and Tubes. Office of Scientific and Technical Information (OSTI), 2018. http://dx.doi.org/10.2172/1507875.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Murray, A. M. Flow sheet development for the dissolution of unirradiated Mark 42 fuel tubes in F-Canyon, Part II. Office of Scientific and Technical Information (OSTI), 1999. http://dx.doi.org/10.2172/752186.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Yogev, David, Ricardo Rosenbusch, Sharon Levisohn, and Eitan Rapoport. Molecular Pathogenesis of Mycoplasma bovis and Mycoplasma agalactiae and its Application in Diagnosis and Control. United States Department of Agriculture, 2000. http://dx.doi.org/10.32747/2000.7573073.bard.

Full text

Abstract:

Mycoplasma bovis and M. agalactiae are two phylogenetically related mycoplasmas which cause economically significant diseases in their respective bovine or small ruminant hosts. These organisms cause persistent asymptomatic infections that can result in severe outbreaks upon introduction of carrier animals into susceptible herds. Little is known about the mechanisms underlying mycoplasma-host interaction, variation in virulence, or of the factors enabling avoidance of the host immune system. In recent years it has become apparent that the ability of pathogenic microorganisms to rapidly alter s

APA, Harvard, Vancouver, ISO, and other styles

7

Description sheet to the multi-stakeholder framework for intervening in root, tuber and banana seed systems. International Potato Center, 2021. http://dx.doi.org/10.4160/9789290605720.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

Description sheet to the four-square method for intervening in root, tuber and banana seed systems. International Potato Center, 2020. http://dx.doi.org/10.4160/9789290605898.

Full text

APA, Harvard, Vancouver, ISO, and other styles

We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!