Relevant bibliographies by topics / Shelling time

Contents

  1. Journal articles
  2. Books
  3. Book chapters
  4. Conference papers

Academic literature on the topic 'Shelling time'

Author: Grafiati
Published: 3 June 2025
Last updated: 31 July 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Shelling time.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Shelling time"

1

M., U. Abba, and A. Atiku A. "EFFECT OF MOISTURE CONTENT ON MAIZE SHELLING SPEED USING A MANUALLY OPERATED HAND SHELLER IN MUBI, ADAMAWA STATE." Continental J. Engineering Sciences 5, no. 1 (2017): 14–17. https://doi.org/10.5281/zenodo.833733.

Full text
Abstract:
The study examined the effect of moisture content on maize shelling speed using a manually operated hand Sheller (cone type). Twenty (20) unthreshed maize cob samples (A-J) were used for the study. The samples were analysed in the laboratory for parameters such as weight of samples before and after drying, moisture content and shelling speed. The result indicated that sample J, after sixty nine hours (69<sup>th</sup>) oven drying recorded the lowest moisture content(15.10% wb ) and the fastest shelling speed (0.75 rev. per. Sec) compared to sample A (24 h drying time) which had the highest moi
APA, Harvard, Vancouver, ISO, and other styles
2

Ibiyeye, Dare, Olaoye Kayode, Oluwatoyin Olunloyo, Adedipe Jide, and Adesida Oluwatosin. "Effect of corn Zea mays L. cob moisture content on the performance of a corn-cob sheller machine." Technology audit and production reserves 6, no. 3(74) (2023): 28–36. http://dx.doi.org/10.15587/2706-5448.2023.293521.

Full text
Abstract:
The object of the research is machine shelling efficiency. This study focused on the assessment of a fabricated corn Sheller machine and resolution of optimal moisture content percentage dry basis (% MCdb) for shelling corn-cobs. Corn-cobs samples at 8, 13 and 18 % MCdb were sorted into 3.15, 2.15 and 1.15 kg feed-masses, respectively. Samples were selected in triplicates for shelling operations time 5, 6 and 7 seconds. Standard method was used to determine the effect of shelling operation on corn-cobs’ quality variables. Response Surface Method was employed to optimize data with machine feed-
APA, Harvard, Vancouver, ISO, and other styles
3

Maksymchuk, Mariia, and Iryna Gamalii. "WAYS OF COPING WITH STRESS AMONG UKRAINIANS DEPENDING ON THE INTENSITY OF THE SHELLING." Kyiv journal of modern psychology and psychotherapy 7 (March 31, 2024): 38–56. http://dx.doi.org/10.48020/mppj.2024.01.03.

Full text
Abstract:
The article presents the results of theoretical and empirical research on the impact of the shelling intensivity on the choice of coping strategy and on the level of stress resistance of civilians. Based on the empirical research, it was proven that Ukrainians who are exposed to the shelling have a higher level of stress resistance than those living without shelling. It was stated that in a war situation, Ukrainians have a task-focused coping strategy. There is avoidance-focused coping on the second place, and on the third place there is emotion-focused coping. However, these strategies are mo
APA, Harvard, Vancouver, ISO, and other styles
4

SELVAN, M. MUTHAMIL, and INDRA MANI. "Development of power-operated continuous-feed green-pea sheller." Indian Journal of Agricultural Sciences 90, no. 2 (2020): 396–400. http://dx.doi.org/10.56093/ijas.v90i2.99030.

Full text
Abstract:
Shelling of green-peas from pods is still a manual operation among vegetable vendors in India making shelling operation a crucial and time consuming task. There was a need for a machine that would accept a variety of green-pea pods as input and produce green-peas as output, with a little to no work required by the operator. Therefore, a machine was specially designed, fabricated, and tested to master shelling management in 2018 in New Delhi. It was a vertical free-standing unit and consisted of electric motor, feeding tray, two shelling rollers, and outlet-tank. The capacity of the machine was
APA, Harvard, Vancouver, ISO, and other styles
5

Bhandari, Prabhat Kiran, Nishan Adhikari, and Rajesh Bhattarai. "Design and Fabrication of a Spiked-Shaft Maize Seed Separato." Technical Journal 3, no. 1 (2023): 50–65. http://dx.doi.org/10.3126/tj.v3i1.61965.

Full text
Abstract:
Maize shelling in developing and underdeveloped nations has been and remains a severe problem to its processing as it is tedious and requires more labour hours. This study aims to design and fabricate a motor-powered spike-shaft type Maize Seed Separator (MSS) machine. The design and selection of components like the motor, belt, frame, bearing, and shaft were made based on general design considerations. After the complete fabrication of the MSS machine, it was tested to find its shelling capacity and efficiency. The shelling capacity was found to be 220 kg/hr, which is 80 times faster than man
APA, Harvard, Vancouver, ISO, and other styles
6

N. R. Gatkal, S. M. Nalawade, and P. P. Pawase. "Design of a Motorised Maize Sheller and Optimisation of its Operating Parameters." Journal of Agricultural Engineering (India) 60, no. 3 (2023): 234–50. http://dx.doi.org/10.52151/jae2023603.1810.

Full text
Abstract:
Maize shelling is an important post-harvest operation to separate the grains from its cob. Traditional methods involve rubbing maize cobs against each other, rubbing on stones, or hand method. These methods are labour-intensive, time-consuming, and drudgery-prone. Migration from rural population to cities for better livelihoods has creates labour shortage in rural areas during the peak period of maize shelling. A study was undertaken to design, develop, and evaluate the performance of an electric motor powered maize sheller. It consisted of a frame, feeding chute, cylinder, outer cover, rotor
APA, Harvard, Vancouver, ISO, and other styles
7

Andriyono, . "Design of a Corn Shelling Machine with an Elastic Collision System Using Iron Chains." Engineering and Technology Journal 9, no. 04 (2024): 3722–24. https://doi.org/10.5281/zenodo.10935440.

Full text
Abstract:
Corn is an agricultural product that is in great demand among farmers, because the process and care methods are not too difficult and the lifespan of corn from planting to post-harvest is 2 months. In the general production process, during shelling, many farmers still use the method of shelling using their hands or simple tools, so it requires quite a long production time. The reason people still shell them using their hands or tools is because the price of the machines is too expensive and they don't even know about corn shelling machines. The machine designed to develop a simple corn sheller
APA, Harvard, Vancouver, ISO, and other styles
8

Lewi, Lewi, Abdul Kadir Muhammad, Lifia Nur Ismayani, and Akmal Setiawan. "RANCANG BANGUN SISTEM PEMIPIL JAGUNG PADA SEPEDA MOTOR LISTRIK RODA TIGA." Jurnal Teknik Mesin Sinergi 19, no. 2 (2021): 271. http://dx.doi.org/10.31963/sinergi.v19i2.3390.

Full text
Abstract:
Shelling is one of the post harvest handling for corn farmers where quality and time are important. Shelling that is done traditionally can cause fatigue and take a long time. The corn sheller machine on tricycle electric motorcycles can be used to save time during the shelling process. This research was conducted to design and make a corn sheller machine on a three-wheeled electric motorcycle that can be used to streamline time during the shelling process. In addition, the purpose of this research is to design and manufacture a corn sheller system on a three-wheeled electric motorcycle with a
APA, Harvard, Vancouver, ISO, and other styles
9

KARANSINH, R.CHITODA. "DESIGN AND DEVELOPMENT OF PEDAL OPERATED MAIZE DESHELLER- A REVIEW." IJIERT - International Journal of Innovations in Engineering Research and Technology 4, no. 2 (2017): 78–83. https://doi.org/10.5281/zenodo.1462277.

Full text
Abstract:
<strong><strong>&nbsp;</strong>Lack of Corn processing machines,especially Maize Sheller,is a major problem of Corn production,especially in our country India. In this paper basic review of research - work for design,fabricate,and performance evaluation of a Corn Sheller consisting of feed hopper,shelling unit,separating unit and power system is carried out .The performance of the machine was studied in terms of throughput capacity,shelling efficiency,material efficiency and mechanical damage. Regression models that could be used to express the relationship existing between the Sheller perform
APA, Harvard, Vancouver, ISO, and other styles
10

Hoque, MA, MZ Hossain, and MA Hossain. "Design and development of a power groundnut sheller." Bangladesh Journal of Agricultural Research 43, no. 4 (2018): 631–45. http://dx.doi.org/10.3329/bjar.v43i4.39162.

Full text
Abstract:
In Bangladesh groundnut shelling is done manually which is laborious, time consuming and costly. Shelling of groundnut pod with the help of mechanical power can be a probable solution of this problem. A power groundnut sheller was designed and fabricated in Farm Machinery and Postharvest Process Engineering (FMPE) Division, Bangladesh Agricultural Research Institute (BARI), Gazipur during 2011-13. The sheller was made of Mild Steel (MS) angle bar, MS flat bar, MS rod, MS sheet, MS sieve, rubber pad etc. The shelling capacities of power groundnut sheller were 110 and 115 kg/h for Dhaka-1 and BA
APA, Harvard, Vancouver, ISO, and other styles
More sources

Books on the topic "Shelling time"

1

Orkaby, Asher. Recognizing the New Republic. Oxford University Press, 2017. http://dx.doi.org/10.1093/acprof:oso/9780190618445.003.0003.

Full text
Abstract:
The deposed Yemeni Imam Muhammad al-Badr escaped the shelling of his palace in September 1962 and fled north to gather loyal tribal militias. By the time al-Badr’s escape was revealed to the public, two months after the initial assault on Sana’a, most of the world had already recognized the new republic, under the assumption that al-Badr was dead. Egypt and the Soviet Union, which had both developed a close alliance with al-Badr before 1962, were compelled to recognize the republic or risk losing their political, economic, and strategic investments in Yemen. What emerged at the end of 1962 was
APA, Harvard, Vancouver, ISO, and other styles

Book chapters on the topic "Shelling time"

1

Belinskyi, Serhii, Andrii Dmytrenko, Yulia Ivashko, and Aneta Pawłowska. "The Face of the War in Ukraine. War Devastation and Reconstruction Concepts." In Narzędzia wojny. Oblicza wojny, t. 8. Wydawnictwo Uniwersytetu Łódzkiego, 2023. http://dx.doi.org/10.18778/8331-314-6.02.

Full text
Abstract:
Every war brings losses not only on the economic level but also on the social level. Russia's aggression against Ukraine, which began on 24 February 2022, made this clear once again. A country that had already experienced many starts in historical times also found itself in the heat of battle this time. The military conflict led to a significant migration of the Ukrainian population. As a result of bombing and shelling by the Russian army, many buildings of various purposes were destroyed – not only those classified as military infrastructure or those under state administration, schools, hospi
APA, Harvard, Vancouver, ISO, and other styles
2

Toal, Gerard. "Territorial Integrity." In Near Abroad. Oxford University Press, 2017. http://dx.doi.org/10.1093/oso/9780190253301.003.0010.

Full text
Abstract:
On the Evening of August 7, 2008, Inal Pliyev was working late at his office in the center of Tskhinval(i). A former journalist, Pliyev was head of communications for the self-declared South Ossetian Republic. Earlier in the evening, Georgian president Mikheil Saakashvili had declared a unilateral ceasefire after days of skirmishes between Georgian forces and South Ossetian militias. Pliyev, however, was still in the office because of information about increasing Georgian artillery and armor concentrations near the town. “First we heard what sounded like grenade launchers—after the years of co
APA, Harvard, Vancouver, ISO, and other styles
3

Toal, Gerard. "Introduction: Near Abroads." In Near Abroad. Oxford University Press, 2017. http://dx.doi.org/10.1093/oso/9780190253301.003.0006.

Full text
Abstract:
On my third evening in Russia, the world changed. I was in Stavropol, a city founded by Prince Gregory Potemkin at the time of the American Revolution as one of ten fortresses to defend the borders of the expanding Russian Empire. To the south were the Caucasus, formidable mountains and myriad peoples. Stavropol grew as an administrative center of tsarist and later Soviet power. It briefly fell to the Wehrmacht in 1942 as the invading army drove unsuccessfully toward the oilfields of Baku. Later, a popular young party secretary from the area got noticed in Moscow, joined the Politburo, and in
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Shelling time"

1

Cummings, Scott M., Tom McCabe, and Dan Gosselin. "Brake Shoes and Thermal Mechanical Shelling." In ASME 2008 Rail Transportation Division Fall Technical Conference. ASMEDC, 2008. http://dx.doi.org/10.1115/rtdf2008-74016.

Full text
Abstract:
The Wheel Defect Prevention Research Consortium (WDPRC) conducted a review of existing brake shoe tests to explore the combinations of brake shoe force, time, and wheel/brake shoe coefficient of friction (COF) needed to achieve the temperatures of concern for thermal mechanical shelling (TMS). Data was found involving normally expected brake shoe forces applied to a dynamometer wheel and a variety of test parameters and procedures. All temperatures were measured using a sliding thermocouple pressed lightly against the wheel tread. All testing reported involved new brake shoes that may have dif
APA, Harvard, Vancouver, ISO, and other styles
2

Cummings, Scott M. "Service Wheel Temperatures and Car Condition in Relation to Thermal Mechanical Shelling." In ASME 2008 Rail Transportation Division Fall Technical Conference. ASMEDC, 2008. http://dx.doi.org/10.1115/rtdf2008-74015.

Full text
Abstract:
The Wheel Defect Prevention Research Consortium (WDPRC) examined data from a wayside wheel temperature detector (WTD) located near the bottom of a grade in order to explore the root causes of hot wheels and thermal mechanical shelling. Not surprisingly, the data showed that most hot wheels, defined in this paper as a wayside WTD reading of 260°C (500°F) or greater, are found in trains descending the grade (descending trains), although they can be found in trains ascending the grade (ascending trains) as well. The majority of cars with hot wheels in ascending trains have the brakes applied at a
APA, Harvard, Vancouver, ISO, and other styles
3

Усова, О. В. "BUILDINGS OF THE FORMER CENTRAL SCHOOL OF TECHNICAL DRAWING OF BARON STIEGLITZ IN THE 1920s–1940s." In Месмахеровские чтения — 2025. Crossref, 2025. https://doi.org/10.54874/9785605245896.2025.11.09.

Full text
Abstract:
Период между закрытием Центрального училища технического рисования барона Штиглица (ЦУТР) и открытием Ленинградского художественно-промышленного училища (ЛВХПУ) богат событиями и представляет большой интерес для исследователей. Особо важными для изучения являются годы Великой Отечественной войны и блокады Ленинграда. Этому трагическому и героическому времени в истории академии уделяется особое внимание. В статье публикуются редкие фотографии повреждений в зданиях музея и библиотеки в результате артобстрелов и бомбардировок осажденного Ленинграда. The period between the closure of the Baron Sti
APA, Harvard, Vancouver, ISO, and other styles
4

Dedmon, Steven L. "The Role of Oxidation in Railroad Wheels." In 2012 Joint Rail Conference. American Society of Mechanical Engineers, 2012. http://dx.doi.org/10.1115/jrc2012-74124.

Full text
Abstract:
On-tread braking generates high heat and often results in temperatures on the tread surface in excess of 400C (750F). Temperatures this high result in rapid oxidation of the tread surface. High temperature oxidation for steel generally follows a parabolic rate law: the time to generate a given weight or thickness of an oxide layer increases proportionately to the square of the weight or thickness of that oxide layer. The decrease in the rate of generation of new scale thickness results from the longer time it takes for oxygen to diffuse through an increasingly thicker layer of oxide. However,
APA, Harvard, Vancouver, ISO, and other styles
5

Bulgakov, Volodymyr, Olena Glazunova, Ivan Holovach, et al. "Investigation in working body power parameters and energy capacity for removing damaged soil from surface of craters." In 24th International Scientific Conference Engineering for Rural Development. Latvia University of Life Sciences and Technologies, Faculty of Engineering and Information Technologies, 2025. https://doi.org/10.22616/erdev.2025.24.tf026.

Full text
Abstract:
As a result of the completed research, the impact of the armed aggression and military actions on the soil cover was studied and analyzed, in particular, the damage and destruction of the fertile soil layer due to detonation of various kinds of explosive objects (rockets, aerial bombs, artillery shells, etc.). In consequence of rocket and artillery shelling, the fields are covered with craters from exploding shells, mines, and rockets. The craters are of different diameters and depths. The soil, remaining at the impact site, is turbulent, subject to dynamic compaction, and also contains numero
APA, Harvard, Vancouver, ISO, and other styles
6

Hartsough, Christopher M., Jingzhe Zhang, Joseph W. Palese, and Sergio DiVentura. "A Method for the Measurement and Efficient Removal of Rail Corrugation for the Subsequent Reestablishment of Profile." In 2017 Joint Rail Conference. American Society of Mechanical Engineers, 2017. http://dx.doi.org/10.1115/jrc2017-2253.

Full text
Abstract:
One of the key issues facing rail maintenance crews today is the successful identification and removal of rail corrugations (a sinusoidal, longitudinal rail surface deformation). Typically, rail corrugations are identified through visual inspection (which look for regular surface patterns) or audio methods (which listen for high frequency noise). Once identified, removal is accomplished through rail grinding and consists of running standard “peak-and-plow” grind pattern(s), whereby the corners of the rail are angled upwards to peak the rail, then the top of the rail is ground down (plowed) by
APA, Harvard, Vancouver, ISO, and other styles
7

Kopiika, Nadiia, Jelena Ninić, and Stergios-Aristoteles Mitoulis. "Damage characterisation using Sentinel-1 images: Case study of bridges in Ukraine." In IABSE Symposium, Manchester 2024: Construction’s Role for a World in Emergency. International Association for Bridge and Structural Engineering (IABSE), 2024. http://dx.doi.org/10.2749/manchester.2024.0367.

Full text
Abstract:
&lt;p&gt;Bridges are vital infrastructure assets, ensuring the economic activity during the adverse times of conflict. Notwithstanding, there is insignificant research regarding their damage characterization with the use of remote approaches for post-conflict recovery. Monitoring and remote sensing is a promising technology for identification of damages caused by war-induced hazards, including artillery fire, explosions and shelling, and hence facilitate accurate and rapid evaluations of capacity and functionality loss, providing valuable information for reliable risk assessments at emergency
APA, Harvard, Vancouver, ISO, and other styles
8

Levy, Bryan, Ethan Hilton, Megan Tomko, and Julie Linsey. "Investigating Problem Similarity Through Study of Between-Subject and Within-Subject Experiments." In ASME 2017 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. American Society of Mechanical Engineers, 2017. http://dx.doi.org/10.1115/detc2017-68428.

Full text
Abstract:
Design problems are used to evaluate students’ abilities, the impact of various teaching approaches and of design methods. Design problems greatly vary in style and subject area in order to accommodate for a wide distribution of disciplines, cultures, and expertise. While design problems are occasionally reused between studies, new design problems are continuously created in order to account for the fact that a design problem cannot be used multiple times on an individual in order to effectively measure one’s abilities to perform design. More specifically, in repeated measures testing, student
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Shelling time' for particular source types:
Journal articles
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography