Log in

Relevant bibliographies by topics / Sliced model / Journal articles

To see the other types of publications on this topic, follow the link: Sliced model.

Journal articles on the topic 'Sliced model'

Author: Grafiati

Published: 30 May 2022

Last updated: 31 July 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the top 50 journal articles for your research on the topic 'Sliced model.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Browse journal articles on a wide variety of disciplines and organise your bibliography correctly.

1

Amarullah, D. Indradewa, P. Yudono, and BH Dan Sunarminto. "Effect of source-sink manipulation on yield and related yield components in cassava, Manihot esculenta Crantz." International Journal of Agricultural Research, Innovation and Technology 6, no. 2 (2017): 69–76. http://dx.doi.org/10.3329/ijarit.v6i2.31708.

Full text

Abstract:

The distribution of nutrients and assimilates in different organs and tissues is in a constant state of flux throughout the growth and development of a plant. At key stages during the life cycle, profound changes occur, and perhaps one of the most critical of these is during tubers filling. The purpose of this study was to examine the effect of sources- sink manipulation to related yield and yield components of cassava cultivars Singgah. Experiment manipulation source using number of branches cropping (S) which consists of three levels i.e. S1: 1 branch planting; S2: 2 branches planting; S3: 3

APA, Harvard, Vancouver, ISO, and other styles

2

Nie, Boxin, and Xiaojia Ran. "A Linear Discriminant Analysis model based on Sliced Inverse Regression lifting." Highlights in Science, Engineering and Technology 103 (June 26, 2024): 424–32. http://dx.doi.org/10.54097/07bdff79.

Full text

Abstract:

Linear Discriminant Analysis is a dimension-reduction tool for high-dimensional data in the classical field of machine learning. However, for the binary classification problem in the case of high-dimensional prediction, the dimension of the dimension reduction space of the Linear Discriminant Analysis model cannot be greater than the number of categories, that is, it can only be reduced to one dimension, which will greatly lose the effective information of the original prediction variable for the response variable. Based on this, this paper proposes an improved Linear Discriminant Analysis mod

APA, Harvard, Vancouver, ISO, and other styles

3

Ainebyona, Paddy Isa, Musoke Yekoyada, Julia Kigozi, and Nabubuya Agnes. "Effects of Slice Thickness and Pre-Treatment Concentration on the Quality Characteristics of Solar Dried Pineapple." European Journal of Agriculture and Food Sciences 5, no. 4 (2023): 47–54. http://dx.doi.org/10.24018/ejfood.2023.5.4.454.

Full text

Abstract:

The overall goal of this study was to determine the quality changes (vitamin C retention, browning, rehydration ratio) that occur during solar drying of pineapple as influenced by different processing conditions (slice thickness and pre-treatment concentration). Pineapple fruits were sliced to varying thicknesses (5 and 10 mm), pre-treated at different concentrations of citric acid (2, 5, and 10 g/l), and dried for 2 days in a Hohenheim model type solar tunnel dryer until a safe moisture level about ≤15% was reached. Samples were analyzed for changes in quality characteristics using standard A

APA, Harvard, Vancouver, ISO, and other styles

4

Zhao, H., M. Tomko, and K. Khoshelham. "ENTROPY-BASED INDOOR CHANGE DETECTION USING LIDAR DATA AND A 3D MODEL." ISPRS Annals of the Photogrammetry, Remote Sensing and Spatial Information Sciences X-1/W1-2023 (December 5, 2023): 287–93. http://dx.doi.org/10.5194/isprs-annals-x-1-w1-2023-287-2023.

Full text

Abstract:

Abstract. Indoor change detection is important for building monitoring, building management and model-based localization and navigation systems because the real building environment may not always be the same as the design model. This paper presents a novel indoor building change detection method based on entropy. A sequence of real LiDAR scans is acquired with a static LiDAR scanner and the pose of the LiDAR scanner for each scan is then estimated. Synthetic LiDAR scans are generated with the pose of the LiDAR scanner using the 3D model. The real LiDAR scans and synthetic LiDAR scans are slic

APA, Harvard, Vancouver, ISO, and other styles

5

Hartati, Tri Mulya, Chumidach Roini, and Indah Rodianawati. "Growth Response of Local Cassava to Cutting Models and the Number of Buds." Caraka Tani: Journal of Sustainable Agriculture 36, no. 2 (2021): 379. http://dx.doi.org/10.20961/carakatani.v36i2.37746.

Full text

Abstract:

Cassava is one of the local food sources that are widely available in almost every region. Cuttings are used to plant cassava, and these cuttings will produce a number of roots and buds. The main purpose of this study was to evaluate the effect of cuttings slices model and the number of buds on the growth of Tobelo local varieties of cassava. This study employed a factorial Randomized Block Design (RBD), with the cuttings slices model as the first factor, consisting of three levels, namely: flat slice, one-sided slice and two-sided slice. The second factor is the number of buds, which is divid

APA, Harvard, Vancouver, ISO, and other styles

6

Cahyati, Sally, and Haris Risqy Aziz. "The Influence of Different Slicer Software on 3d Printing Products Accuracy and Surface Roughness." Jurnal Rekayasa Mesin 12, no. 2 (2021): 371–80. http://dx.doi.org/10.21776/ub.jrm.2021.012.02.14.

Full text

Abstract:

Rapid Prototyping (RP) is a manufacturing process that produces a 3D model CAD to be a real product rapidly by using additive manufacturing technology. In this case, the product will print layer by layer uses a 3D printer machine. The 3D printer requires slicer software to convert CAD data into data that a 3D printer machine can read. Research is done to analyze the effect of three kinds of slicer software on 3D printing objects on the accuracy and surface roughness of the product. The 3D model CAD is sliced using three different slicer software, namely Ideamaker, Repetier Host, and Cura. The

APA, Harvard, Vancouver, ISO, and other styles

7

Athiroh, Nour, Ari Hayati, Istirochah Pudjiwati, Ahmad Taufiq, and Nurul Jadid Mubarakati. "The portrait of neem leaves-based high performance wound healing activity on zebrafish." Berkala Penelitian Hayati 27, no. 1 (2021): 23–27. http://dx.doi.org/10.23869/bphjbr.27.1.20214.

Full text

Abstract:

This study was designed to evaluate the role of sliced and dropping models of neem leaves (Azadirachta indica) and environmental factors on zebrafish wound shrinkage. This study employed two treatment models: neem leaf slices and drops model. The treatment in the neem leaf slice model was the control group (fish was injured without neem leaf slices treatment, and G1-G3 of each fish was injured at 0.3 cm + 0.5, 1, and 2 g. Treatment in the neem leaf drop model was control group (fish was injured without neem leaves drops, and G1-G3 of each fish was injured at 0.3 cm + 1, 2, 4 drops. Findings su

APA, Harvard, Vancouver, ISO, and other styles

8

Mo, Longhui, Huajun Xi, and Yi Ding. "Functional Data Regression Based on KLRFSIR and Bayesian Model Averaging." Highlights in Science, Engineering and Technology 70 (November 15, 2023): 427–35. http://dx.doi.org/10.54097/hset.v70i.13893.

Full text

Abstract:

This paper focuses on an important direction in modern data analysis: functional data regression. Functional data is typically infinite-dimensional, and this paper specifically examines the case where the predictor variable is functional data and the response variable is a continuous scalar. Based on this, the paper propose a regression method that combines kernel localized and regularized functional sliced inverse regression with Bayesian model averaging. The innovation of this method lies in two aspects: firstly, compared to traditional sliced inverse regression, it captures more detailed lo

APA, Harvard, Vancouver, ISO, and other styles

9

Frimmel, Hans, Lars Egevad, Christer Busch, and Ewert Bengtsson. "Automatic Registration and Error Detection of Multiple Slices Using Landmarks." Analytical Cellular Pathology 23, no. 3-4 (2001): 159–65. http://dx.doi.org/10.1155/2001/367976.

Full text

Abstract:

Objectives. When analysing the 3D structure of tissue, serial sectioning and staining of the resulting slices is sometimes the preferred option. This leads to severe registration problems. In this paper, a method for automatic registration and error detection of slices using landmark needles has been developed. A cost function takes some parameters from the current state of the problem to be solved as input and gives a quality of the current solution as output. The cost function used in this paper, is based on a model of the slices and the landmark needles. The method has been used to register

APA, Harvard, Vancouver, ISO, and other styles

10

Landua, John, Ping Gong, Lacey Dobrolecki, Christina Sallas, and Michael T. Lewis. "Abstract P3-04-16: Tumor Tissue Slices from Breast Cancer Patient Derived Xenografts as an Ex Vivo Method for Treatment Response." Clinical Cancer Research 31, no. 12_Supplement (2025): P3–04–16—P3–04–16. https://doi.org/10.1158/1557-3265.sabcs24-p3-04-16.

Full text

Abstract:

Abstract Introduction: The generation of patient derived xenografts (PDX) by implanting human breast tumors in the epithelium-free mammary fat pad of immunodeficient mice has allowed researchers to overcome the difficulties in consistently obtaining cancer tissue and provides a more biologically accurate model compared to in vitro cell lines. PDXs also allow for the propagation of a cohort of human breast tumors in which to perform preclinical studies to investigate treatment response. However, due to the costs associated with immunodeficient mice, drugs, and labor, these studies can become co

APA, Harvard, Vancouver, ISO, and other styles

11

Daud, Luqman Ebow Ibn, and Isaac Nyambe Simate. "Drying Kinetics of Sliced Pineapples in a Solar Conduction Dryer." Energy and Environment Research 7, no. 2 (2017): 14. http://dx.doi.org/10.5539/eer.v7n2p14.

Full text

Abstract:

As a means of adding value to pineapple production and minimising post-harvest losses, sliced pineapples were dried using a Solar Conduction Dryer (SCD) and appropriate thin layer drying models to predict drying were developed whilst the performance of the SCD was also investigated. For the period of the experiment, ambient temperature and temperature in the dryer ranged from 24 to 37 °C and 25 to 46 ℃ respectively. The performance of the dryer was compared to open sun drying using pineapple slices of 3-5 mm in thickness where the slices were reduced from an average moisture content of 85.42 %

APA, Harvard, Vancouver, ISO, and other styles

12

Power, Michael Declan, and Yuexiao Dong. "Bayesian model averaging sliced inverse regression." Statistics & Probability Letters 174 (July 2021): 109103. http://dx.doi.org/10.1016/j.spl.2021.109103.

Full text

APA, Harvard, Vancouver, ISO, and other styles

13

Kamal, Mirza Sahria, Md Shakil, Tanjina Akter, Sabina Yasmin, Abu Saeid, and Mayeen Uddin Khandaker. "Moisture Sorption Behavior and Effects of Temperature, Slice Thickness, and Loading Density on Drying Kinetics of a Local Sweet Potato Cultivar Grown in Bangladesh." Journal of Food Processing and Preservation 2023 (June 21, 2023): 1–14. http://dx.doi.org/10.1155/2023/5523400.

Full text

Abstract:

This study is aimed at investigating the moisture sorption behavior and thin-layer drying kinetics of local sweet potato sada (LSPS) variety slices. The sweet potato tubers were sliced at 3, 5, and 7 mm and dried at temperatures of 45, 55, and 62°C at a constant air velocity of 0.6 m/sec in a laboratory-scale cabinet dryer. The BET (Brunauer, Emmet, and Teller) and GAB (Guggenheim-Anderson-De Bore) models were applied to fit the sorption data. Fick’s diffusion equation was used to calculate the drying rate constant and effective moisture diffusivity. Our current result reveals that LSPS exhibi

APA, Harvard, Vancouver, ISO, and other styles

14

Wang, Lijuan, and Yinghui Wang. "Slice-Guided Components Detection and Spatial Semantics Acquisition of Indoor Point Clouds." Sensors 22, no. 3 (2022): 1121. http://dx.doi.org/10.3390/s22031121.

Full text

Abstract:

Extracting indoor scene components (i.e., the meaningful parts of indoor objects) and obtaining their spatial relationships (e.g., adjacent, in the left of, etc.) is crucial for scene reconstruction and understanding. At present, the detection of indoor scene components with complex shapes is still challenging. To fix the problem, a simple yet powerful slice-guided algorithm is proposed. The key insight is that slices of indoor scene components always have similar profiles no matter if the components are simple-shaped or complex-shaped. Specifically, we sliced the indoor scene model into many

APA, Harvard, Vancouver, ISO, and other styles

15

de Farias, R. Pereira, V. A. Barbosa de Oliveira, V. A. Agra Brandão, W. Pereira da Silva, A. G. Barbosa de Lima, and J. J. Silva Nascimento. "Drying of Banana Slices: Lumped Model Application and Experiments." Defect and Diffusion Forum 391 (February 2019): 42–47. http://dx.doi.org/10.4028/www.scientific.net/ddf.391.42.

Full text

Abstract:

This work presents a theoretical and experimental study of banana drying. Whole banana were peeled, sliced manually and dried in an oven at constant drying condition (40 and 70°C). Drying, heating and shrinkage lumped models were proposed and fitted to experimental data. Non-linear regression analyses were done to verify the consistence of the models to predict the experimental data. Results revealed which air temperature affect significantly moisture removal, heating and shrinkage of banana slices. Drying, heating and dimensions variations were increased when higher temperature and area/volum

APA, Harvard, Vancouver, ISO, and other styles

16

Abduh, Moh, Lourina Evanale Orfa, Sulianto Sulianto, and Khairul Iqbal. "Pressure Drop Analysis of Turbine Housing Model with Circular Sliced Pipe for Micro Hydropower Generation." Aceh International Journal of Science and Technology 13, no. 2 (2024): 92–102. https://doi.org/10.13170/aijst.13.2.37998.

Full text

Abstract:

Energy independence is a government program aiming to meet society's energy needs evenly. Steps to increase energy independence in the new and renewable energy sector include hydro-energy generation. One of the important components of a hydro generator is the penstock pipe and turbine housing, which channels water and then pushes and drives (spins) the turbine with the flow of water to produce electrical energy. The turbine housing flow design innovation must provide a function as an optimal fluid conductor by minimizing the resistance that occurs when fluid flows towards the turbine housing a

APA, Harvard, Vancouver, ISO, and other styles

17

Haque, Azizul, Donald C. Shields, Arabinda Das, Abhay Varma, Russel J. Reiter, and Narendra L. Banik. "Melatonin receptor-mediated attenuation of excitotoxic cell death in cultured spinal cord slices." Melatonin Research 4, no. 2 (2021): 336–47. http://dx.doi.org/10.32794/mr11250098.

Full text

Abstract:

Recent studies suggest ex vivo modeling of neuronal injury is a robust approach for the mechanistic study of neurodegeneration. Melatonin, an indolamine, is a versatile molecule with antioxidative, antiapoptotic, neuroprotective, and anti-inflammatory properties. While melatonin has been studied as a therapeutic agent for spinal cord injury (SCI) related neuronal cell loss, its actions in organotypic slice cultures approximating SCI effects are less well understood. The actions of melatonin were therefore examined following exposure of cultured rat spinal cord slices to glutamate excitotoxicit

APA, Harvard, Vancouver, ISO, and other styles

18

McClure, William Fred, Hisashi Maeda, Jian Dong, Yongliang Liu, and Yukihiro Ozaki. "Two-Dimensional Correlation of Fourier Transform Near-Infrared and Fourier Transform Raman Spectra I: Mixtures of Sugar and Protein." Applied Spectroscopy 50, no. 4 (1996): 467–75. http://dx.doi.org/10.1366/0003702963906177.

Full text

Abstract:

Two-dimensional (2D) correlation of near-infrared (NIR) and Raman spectra was carried out for mixtures of protein (lysozyme) and sugar (sucrose) to investigate the potential of this technique for qualitative NIR spectral interpretation. Cross-correlation by least-squares was employed to assess changes in both sets of spectra which result from changes in the set of sample spectra. Fourier transform (FT) NIR and NIR-excited FT-Raman spectra were measured for each of the samples under the same conditions, and point-for-point 2D cross-correlation was calculated. In this technique, each wavenumber

APA, Harvard, Vancouver, ISO, and other styles

19

Li, Lexin, Jeffrey S. Simonoff, and Chih-Ling Tsai. "Tobit model estimation and sliced inverse regression." Statistical Modelling: An International Journal 7, no. 2 (2007): 107–23. http://dx.doi.org/10.1177/1471082x0700700201.

Full text

APA, Harvard, Vancouver, ISO, and other styles

20

Li, Xiang Ping, Qing Shun Wang, and Wei Sun. "Rapid Prototyping Technology in the Three Dimensional Model of Hierarchical Processing." Applied Mechanics and Materials 713-715 (January 2015): 147–51. http://dx.doi.org/10.4028/www.scientific.net/amm.713-715.147.

Full text

Abstract:

Rapid prototyping technology can generate parts directly from the three-dimensional CAD entity data, hierarchical algorithm is a key link in rapid prototyping manufacture. In this paper, mainly used a hierarchical approach in RP equipment,for the study aimed at three commonly hierarchical algorithm (hierarchical algorithm based on STL model, direct sliced of CAD models, Smart Slice based on STL model) by Perspective, trying to provide a reference for the stratification algorithm of RP system by comparison of the three tiered approach,This paper argues that the Smart slicing algorithm based on

APA, Harvard, Vancouver, ISO, and other styles

21

Jing, Qianfeng, Helong Shen, and Yong Yin. "A Stereolithographic Model-Based Dense Body Plan Generation Method to Construct a Ship Hydrodynamic Coefficients Database." Journal of Marine Science and Engineering 8, no. 3 (2020): 222. http://dx.doi.org/10.3390/jmse8030222.

Full text

Abstract:

A ship’s body plan is a vital data resource of ship hydrodynamics analysis, especially for time-domain simulations. Motivated by 3D printing technology, a novel dense body plan generation method is developed in this study. The slicing algorithm is adopted to generate dense 2D body plans from ship stereolithographic models. The dense body plan can be produced automatically under arbitrary rotational angles and slices. Moreover, a section redistribution algorithm is integrated to eliminate the non-uniform distribution features in sliced data inherited from the stereolithographic models. The benc

APA, Harvard, Vancouver, ISO, and other styles

22

AlQahtani, Salman A. "Cooperative-Aware Radio Resource Allocation Scheme for 5G Network Slicing in Cloud Radio Access Networks." Sensors 23, no. 11 (2023): 5111. http://dx.doi.org/10.3390/s23115111.

Full text

Abstract:

The 5G network is designed to serve three main use cases: enhanced mobile broadband (eMBB), massive machine-type communications (mMTC), and ultra-reliable and low-latency communications (uRLLC). There are many new technological enablers, including the cloud radio access network (C-RAN) and network slicing, that can support 5G and meet its requirements. The C-RAN combines both network virtualization and based band unit (BBU) centralization. Using the network slicing concept, the C-RAN BBU pool can be virtually sliced into three different slices. 5G slices require a number of Quality of service

APA, Harvard, Vancouver, ISO, and other styles

23

HA, JAE-WON, and DONG-HYUN KANG. "Inactivation Kinetics of Escherichia coli O157:H7, Salmonella enterica Serovar Typhimurium, and Listeria monocytogenes in Ready-to-Eat Sliced Ham by Near-Infrared Heating at Different Radiation Intensities." Journal of Food Protection 77, no. 7 (2014): 1224–28. http://dx.doi.org/10.4315/0362-028x.jfp-13-561.

Full text

Abstract:

The aim of this study was to investigate the inactivation kinetics of Salmonella enterica serovar Typhimurium, Escherichia coli O157:H7, and Listeria monocytogenes on ready-to-eat sliced ham by near-infrared (NIR) heating as a function of the processing parameter, radiation intensity. Precooked ham slices inoculated with the three pathogens were treated at different NIR intensities (ca. 100, 150, and 200 μW/cm2/nm). An increase in the applied radiation intensity resulted in a gradual increase of inactivation of all pathogens. The survival curves of the three pathogens exhibited both shoulder a

APA, Harvard, Vancouver, ISO, and other styles

24

ENDRIKAT, SARAH, DANIEL GALLAGHER, RÉGIS POUILLOT, et al. "A Comparative Risk Assessment for Listeria monocytogenes in Prepackaged versus Retail-Sliced Deli Meat." Journal of Food Protection 73, no. 4 (2010): 612–19. http://dx.doi.org/10.4315/0362-028x-73.4.612.

Full text

Abstract:

Deli meat was ranked as the highest-risk ready-to-eat food vehicle of Listeria monocytogenes within the 2003 U.S. Food and Drug Administration and U.S. Department of Agriculture, Food Safety and Inspection Service risk assessment. The comparative risk of L. monocytogenes in retail-sliced versus prepackaged deli meats was evaluated with a modified version of this model. Other research has found that retail-sliced deli meats have both higher prevalence and levels of L. monocytogenes than have product sliced and packaged at the manufacturer level. The updated risk assessment model considered slic

APA, Harvard, Vancouver, ISO, and other styles

25

Wang, Qibin, and Yimin Zhang. "A model for analyzing stiffness and stress in a helical gear pair with tooth profile errors." Journal of Vibration and Control 23, no. 2 (2016): 272–89. http://dx.doi.org/10.1177/1077546315576828.

Full text

Abstract:

A model is introduced for analyzing the influence of tooth shape deviations and assembly errors on the helical gear mesh stiffness, loaded transmission error, tooth contact stress and tooth root stress. The helical gear is approximated as a series of independent spur gear slices along axial direction whose face-width is relatively small. The relative position relationships among those sliced teeth in mesh are developed with tooth profile errors and the stiffness of the sliced tooth is calculated by the potential energy method. From the equilibriums of the forces, gear mesh stiffness, loaded tr

APA, Harvard, Vancouver, ISO, and other styles

26

Telçeken, Muhammed, Devrim Akgun, Sezgin Kacar, and Bunyamin Bingol. "A New Approach for Super Resolution Object Detection Using an Image Slicing Algorithm and the Segment Anything Model." Sensors 24, no. 14 (2024): 4526. http://dx.doi.org/10.3390/s24144526.

Full text

Abstract:

Object detection in high resolution enables the identification and localization of objects for monitoring critical areas with precision. Although there have been improvements in object detection at high resolution, the variety of object scales, as well as the diversity of backgrounds and textures in high-resolution images, make it challenging for detectors to generalize successfully. This study introduces a new method for object detection in high-resolution images. The pre-processing stage of the method includes ISA and SAM to slice the input image and segment the objects in bounding boxes, re

APA, Harvard, Vancouver, ISO, and other styles

27

Nwakuba, Nnaemeka R. "Optimisation of energy consumption of a solar-electric dryer during hot air drying of tomato slices." Journal of Agricultural Engineering 50, no. 3 (2019): 150–58. http://dx.doi.org/10.4081/jae.2019.876.

Full text

Abstract:

High-energy demand of convective crop dryers has prompted study on optimisation of dryer energy consumption for optimal and cost effective drying operation. This paper presents response surface optimisation of energy consumption of a solar-electric dryer during hot air drying of tomato slices. Drying experiments were conducted with 1 kg batch of tomato samples using a 33 central composite design of Design Expert 7.0 Statistical Package. Three levels of air velocity (1.0, 1.5 and 2.0 ms–1), slice thickness (10, 15 and 20 mm) and air temperature (50, 60 and 70°C) were used to investigate their e

APA, Harvard, Vancouver, ISO, and other styles

28

Zhang, Zhengyan, and Sanjay Joshi. "Slice data representation and format for multi-material objects for additive manufacturing processes." Rapid Prototyping Journal 23, no. 1 (2017): 149–61. http://dx.doi.org/10.1108/rpj-04-2014-0047.

Full text

Abstract:

Purpose This paper aims to develop a slice-based representation of geometry and material information of a multi-material object to be produced by additive manufacturing. Representation of complex heterogeneous material allowing for the additive manufacturing-based build of a wide range of objects that are limited only by the constraints of the manufacturing process. Design/methodology/approach Initial 3D CAD models are created with multiple and functionally graded materials using an assembly model to create a single part with well-defined material regions. These models are then sliced to creat

APA, Harvard, Vancouver, ISO, and other styles

29

Pourcel, Violaine, Emile Létourneau, Dominique Jean, and Marilyne Labrie. "Abstract A101: A novel ovarian cancer organotypic tumor slice culture model." Cancer Research 84, no. 5_Supplement_2 (2024): A101. http://dx.doi.org/10.1158/1538-7445.ovarian23-a101.

Full text

Abstract:

Abstract High-grade serous ovarian carcinoma (HGSOC) is the most common form of ovarian cancer (OC). This heterogeneous disease is associated with various molecular alterations influencing the disease course. Unfortunately, the impact of those molecular alterations on the response to therapy is still misunderstood. Few OC models allow control of genetic background in the cancer cells while preserving the tumor's architecture and microenvironment, including the immune cells. Furthermore, there is currently no high-throughput model that retains those characteristics and is suitable for drug scre

APA, Harvard, Vancouver, ISO, and other styles

30

Grubîi, Victor, and Jimmy Johansson. "The Impact of Top-Layer Sliced Lamella Thickness and Core Type on Surface-Checking in Engineered Wood Flooring." Forests 14, no. 11 (2023): 2250. http://dx.doi.org/10.3390/f14112250.

Full text

Abstract:

Surface-checking is a significant quality issue of veneer and sliced lamellae-based wood products. This study explores how surface-checking in sliced lamellae-based engineered wood Flooring (EWF) is influenced by two key structure parameters: core type and top-layer thickness. The core types assessed were a standard solid wood lamellae with a veneer back-end layer (S), a standard solid wood lamellae core with veneer back-end layers on the two sides (DS), and a single-layer oriented strand board (OS) core. The EWF element’s top-layer lamellae were plain sliced at nominal dimensions of 1.5, 2.5,

APA, Harvard, Vancouver, ISO, and other styles

31

Panchal, Jay, Antti Lehikoinen, and Paavo Rasilo. "Multi-Axial Sliced Finite-Element Model for Toroidal Inductors." IEEE Transactions on Magnetics 56, no. 1 (2020): 1–6. http://dx.doi.org/10.1109/tmag.2019.2950181.

Full text

APA, Harvard, Vancouver, ISO, and other styles

32

Hao, Jing Bin, Liang Fang, and Jing Ya Wang. "An Efficient Slicing Algorithm for Asynchronous Linear Hotwire Cutting System of Expandable Polystyrene Foam." Key Engineering Materials 464 (January 2011): 199–203. http://dx.doi.org/10.4028/www.scientific.net/kem.464.199.

Full text

Abstract:

The asynchronous linear hotwire cutting (ALHC) system of expandable polystyrene (EPS) foam is a new rapid prototyping (RP) technology, which uses the asynchronous linear hotwire cutter and EPS foam to fabricate the part. The efficiency and capacity of ALHC system depends significantly on the pre-process of STL model. This paper presents an original algorithm for adaptively decomposing a STL model into a set of variable slices, which can be efficiently fabricated by ALHC system. A large complex model is first partitioned into several smaller and simpler sub-models by using the curvature-based p

APA, Harvard, Vancouver, ISO, and other styles

33

Fauzi, Ahmad Sulhan, Engga Predianto, and Fatkur Rhohman. "Mesin Pencacah Cengkeh." Rekayasa 10, no. 1 (2018): 59. http://dx.doi.org/10.21107/rekayasa.v10i1.3605.

Full text

Abstract:

<p><em>Telah dirancang mesin pencacah cengkeh untuk skala home industry dengan modifikasi model pisau dan sistem perajangan. Perancangan mesin menggunakan variasi model pisau, pisau pertama berbentuk memanjang horisontal dengan dimensi alas pisau 15 mm, tinggi pisau 3 mm, panjang 150 mm. Pisau kedua dengan bentuk zigzag horisontal dengan dimensi alas pisau 20 mm, tinggi 3 mm, panjang 50 mm. Modifikasi bentuk pisau ini diharapkan memberikan perbedaan hasil cacahan yang halus dan teratur. Dalam perancangan mesin pencacah cengkeh ini juga ditentukan daya motor yang akan digunakan yait

APA, Harvard, Vancouver, ISO, and other styles

34

Zhang, Xiangsen, Zhongqiang Wu, Ke Liu, Zengshun Zhao, Jinhao Wang, and Chengqin Wu. "Text Sentiment Classification Based on BERT Embedding and Sliced Multi-Head Self-Attention Bi-GRU." Sensors 23, no. 3 (2023): 1481. http://dx.doi.org/10.3390/s23031481.

Full text

Abstract:

In the task of text sentiment analysis, the main problem that we face is that the traditional word vectors represent lack of polysemy, the Recurrent Neural Network cannot be trained in parallel, and the classification accuracy is not high. We propose a sentiment classification model based on the proposed Sliced Bidirectional Gated Recurrent Unit (Sliced Bi-GRU), Multi-head Self-Attention mechanism, and Bidirectional Encoder Representations from Transformers embedding. First, the word vector representation obtained by the BERT pre-trained language model is used as the embedding layer of the neu

APA, Harvard, Vancouver, ISO, and other styles

35

El-mekkawi, Ahmed, Xavier Hesselbach, and Jose Ramon Piney. "Squatting and kicking model evaluation for prioritized sliced resource management." Computer Networks 167 (February 2020): 107006. http://dx.doi.org/10.1016/j.comnet.2019.107006.

Full text

APA, Harvard, Vancouver, ISO, and other styles

36

Yesilata, Bülent, and Mehmet Azmi Aktacir. "A simple moisture transfer model for drying of sliced foods." Applied Thermal Engineering 29, no. 4 (2009): 748–52. http://dx.doi.org/10.1016/j.applthermaleng.2008.03.048.

Full text

APA, Harvard, Vancouver, ISO, and other styles

37

Horner, Rebekah P., Eloise A. Marais, Nana Wei, Robert G. Ryan, and Viral Shah. "Vertical profiles of global tropospheric nitrogen dioxide (NO₂) obtained by cloud slicing the TROPOspheric Monitoring Instrument (TROPOMI)." Atmospheric Chemistry and Physics 24, no. 22 (2024): 13047–64. http://dx.doi.org/10.5194/acp-24-13047-2024.

Full text

Abstract:

Abstract. Routine observations of the vertical distribution of tropospheric nitrogen oxides (NOx ≡ NO + NO2) are severely lacking, despite the large influence of NOx on climate, air quality, and atmospheric oxidants. Here, we derive vertical profiles of global seasonal mean tropospheric NO2 by applying the cloud-slicing method to TROPOspheric Monitoring Instrument (TROPOMI) columns of NO2 retrieved above optically thick clouds. The resultant NO2 is provided at a horizontal resolution of 1° × 1° for multiple years (June 2018 to May 2022), covering five layers of the troposphere: two layers in t

APA, Harvard, Vancouver, ISO, and other styles

38

Wu, Tianxia, and Judith A. Abbott. "359 Firmness and Force Relaxation Characteristics of Tomatoes Stored Intact or as Slices." HortScience 34, no. 3 (1999): 505C—505. http://dx.doi.org/10.21273/hortsci.34.3.505c.

Full text

Abstract:

We compared the firmness and force relaxation characteristics of tomato flesh harvested at six maturity stages and stored intact or as 7-mm slices for 0 to 20 days. Three measurements were made on outer pericarp and columella tissue. A 4-mm cylindrical probe provided more consistent firmness measurements (lower percent CV) than a 6.4-mm spherical probe at harvest, and distances of 3 mm were more consistent than 1 mm. Following loading, stress relaxation was recorded for 10 s. Stored tomato samples were tested only with the 4-mm cylindrical probe and distance of 3 mm. Firmness was taken as the

APA, Harvard, Vancouver, ISO, and other styles

39

Zhao, Chunlin, Zhipeng Yin, Yushuo Tan, et al. "Apple Watercore Grade Classification Method Based on ConvNeXt and Visible/Near-Infrared Spectroscopy." Agriculture 15, no. 7 (2025): 756. https://doi.org/10.3390/agriculture15070756.

Full text

Abstract:

To address the issues of insufficient rigor in existing methods for quantifying apple watercore severity and the complexity and low accuracy of traditional classification models, this study proposes a method for watercore quantification and a classification model based on a deep convolutional neural network. Initially, visible/near-infrared transmission spectral data of apple samples were collected. The apples were then sliced into 4.5 mm thick sections using a specialized tool, and image data of each slice were captured. Using BiSeNet and RIFE algorithms, a three-dimensional model of the wate

APA, Harvard, Vancouver, ISO, and other styles

40

Wang, F., Z. Q. Yin, X. H. Sun, et al. "Additive remanufacturing of coupler knuckle based on robotic gas metal arc welding." Journal of Physics: Conference Series 2045, no. 1 (2021): 012009. http://dx.doi.org/10.1088/1742-6596/2045/1/012009.

Full text

Abstract:

Abstract Take the wear parts of coupler knuckle as an example, the “Modeling—Slicing — Stacking” mode remanufacturing process is studied. First, the 3D model of the of the worn coupler knuckle surface is acquired by structured light 3D detection. The remanufacturing model of the failure part is built by Boolean operation between the original model and the acquired 3D model. Second, the user can slice layer of the remanufacturing model according to the remanufacturing stacking parameters. The zone that surrounded by the contour of each sliced layer is the robotic GMAW remanufacturing stack regi

APA, Harvard, Vancouver, ISO, and other styles

41

Abdipour, A., and A. Pacaud. "Complete sliced model of microwave FET's and comparison with lumped model and experimental results." IEEE Transactions on Microwave Theory and Techniques 44, no. 1 (1996): 4–9. http://dx.doi.org/10.1109/22.481378.

Full text

APA, Harvard, Vancouver, ISO, and other styles

42

Sudhir Kumar Singh, Maharaj Narain, and B K Kumbhar. "Drying Kinetics of Button Mushroom in Fluidized Bed." Journal of Agricultural Engineering (India) 44, no. 1 (2007): 69–75. http://dx.doi.org/10.52151/jae2007441.1243.

Full text

Abstract:

Kinetics of sliced edible mushrooms were studied during fluidized bed drying at different temperatures (50,60, 70, 80 & 90°C). Prior to drying, sliced samples were pretreated: a) blanching, b) soaking in 0.5% KMS (Potassium Metabisulphite) solution, c) soaking in 1% KMS, 0.2% Citric Acid, 6% Sugar & 3% Salt, d) blanching and soaking in 0.5% KMS and e) blanching and soaking in 1% KMS, 0.2 % Citric Acid, 6% Sugar and 3% Salt. It was found that drying rate was proportional to temperature. It was also found that drying behaviour followed the Arrehenius relationship. The values of energy of

APA, Harvard, Vancouver, ISO, and other styles

43

Zeng, Feng, Shan Yao, Zhong Fei Jiao, Shu Ming Zhao, and Tong Yang. "Boundary Separation Approaching Rapid Casting." Advanced Materials Research 230-232 (May 2011): 99–102. http://dx.doi.org/10.4028/www.scientific.net/amr.230-232.99.

Full text

Abstract:

Boundary separation Approaching Rapid Casting is present. In this method, the 3-D CAD model of casting mould is sliced with certain thickness, and the 2-D profile of every slice is converted into the NC code automatically by computer. For case study, taking coated sand as material, casting moulds of propeller was made rapidly by self-developed laser rapid prototyping system. The casting test showed that this method can produce good quality parts. Boundary separation Approaching Rapid Casting with the characteristics of high production efficiency can cast products with complex cured surfaces in

APA, Harvard, Vancouver, ISO, and other styles

44

Sun, Zhaoxi, Wenbin Zhang, and Meiling Zhao. "The Inverse Scattering of Three-Dimensional Inhomogeneous Steady-State Sound Field Models." Mathematics 13, no. 7 (2025): 1187. https://doi.org/10.3390/math13071187.

Full text

Abstract:

We propose a U-Net regression network model for sliced data to reconstruct a three-dimensional irregular steady-state sound field filling inhomogeneous anisotropic media. Through an innovative sliced data processing strategy, the 3D reconstruction problem is decomposed into a combination of 2D problems, thereby significantly reducing the computational cost. The designed multi-channel U-Net fully utilizes the strengths of both the encoder and decoder, exhibiting strong feature extraction and spatial detail recovery capabilities. Numerical experiments show that the model can not only effectively

APA, Harvard, Vancouver, ISO, and other styles

45

Fan, Ying, Manfred W. Beilharz, and Miranda D. Grounds. "A Potential Alternative Strategy for Myoblast Transfer Therapy: The use of Sliced Muscle Grafts." Cell Transplantation 5, no. 3 (1996): 421–29. http://dx.doi.org/10.1177/096368979600500309.

Full text

Abstract:

Excellent long-term survival (up to 1 yr) of donor skeletal muscle cells was demonstrated using a mouse Y-chromosome specific probe, following the transplantation of grafts of whole muscles from male “normal” C57B1/10Sn mice into dystrophic muscles of female host mice. After the transplantation of equivalent sliced muscle grafts there was extensive movement of the male donor cells and fusion with host myofibres. This contrasts with the extremely poor survival of isolated myoblasts after injection into the same mouse model for Duchenne muscular dystrophy. The use of sliced muscle grafts may the

APA, Harvard, Vancouver, ISO, and other styles

46

Liu, Wangyu, and Mingke Li. "A new two-step adaptive direct slicing approach for bio-scaffolds in tissue engineering." Rapid Prototyping Journal 23, no. 6 (2017): 1170–84. http://dx.doi.org/10.1108/rpj-09-2016-0147.

Full text

Abstract:

Purpose This paper aims to propose the new two-step adaptive direct slicing method for building bio-scaffold with digital micro-mirror device (DMD)-based MPμSLA systems. Design/methodology/approach In this paper, the authors proposed a new approach to directly slice a scaffold’s CAD model (i.e the three-dimensional model built by computer-aided design platforms) and save the slices’ data as BMP (bitmap, i.e. the data format used in DMD) files instead of other types of two-dimensional patterns as an intermediary. The proposed two-step strategy in this paper, i.e. a CAD model’s exterior surface

APA, Harvard, Vancouver, ISO, and other styles

47

Anitha Kumari, S., A. Vimala Starbino, B. Priya Esther, and Albert Alexander Stonier. "Statistical Model Identification and Variable Selection for Prediction of Heat Exchanger Fouling." Mathematical Problems in Engineering 2023 (April 15, 2023): 1–9. http://dx.doi.org/10.1155/2023/3040310.

Full text

Abstract:

Fly ash generated during boiler combustion are carried away with hot flue gas and deposited over the heat exchanger surfaces. This study was motivated by the decline in the thermal efficiency of the heat exchangers in thermal power plants due to ash fouling. The paper discusses a new computational procedure that has been attempted to identify the best statistical model for predicting heat exchanger fouling and also to choose the most strongly linked covariates. In this context, three different statistical models including multiple linear regression, sliced inverse regression, and random forest

APA, Harvard, Vancouver, ISO, and other styles

48

Yan-Ni Zhao, Yan-Ni Zhao, and Le Xu Yan-Ni Zhao. "Slicing-guided Skeleton Extraction Method for 3D Point Clouds of Human Body." 電腦學刊 34, no. 6 (2023): 185–202. http://dx.doi.org/10.53106/199115992023123406015.

Full text

Abstract:

<p>In the paper, a slicing-guided method is introduced to extract the curve skeleton from the point cloud body model. Firstly, the dominant eigenvector of body model as slicing direction is chosen adaptively, and the input body model is sliced accordingly. each slice is projected and classified into different regions, and the centroid of each region can be considered as initial skeleton point. Then, those skeleton points are removed outside models, and initial skeleton lines are generated by connecting points based on different region of body model. Finally, the two-step post-processing

APA, Harvard, Vancouver, ISO, and other styles

49

Huang, Yuxing, Yang Pan, Chong Liu, et al. "Rapid and Non-Destructive Geographical Origin Identification of Chuanxiong Slices Using Near-Infrared Spectroscopy and Convolutional Neural Networks." Agriculture 14, no. 8 (2024): 1281. http://dx.doi.org/10.3390/agriculture14081281.

Full text

Abstract:

Ligusticum Chuanxiong, a perennial herb of considerable medicinal value commonly known as Chuanxiong, holds pivotal importance in sliced form for ensuring quality and regulating markets through geographical origin identification. This study introduces an integrated approach utilizing Near-Infrared Spectroscopy (NIRS) and Convolutional Neural Networks (CNNs) to establish an efficient method for rapidly determining the geographical origin of Chuanxiong slices. A dataset comprising 300 samples from 6 distinct origins was analyzed using a 1D-CNN model. In this study, we initially established a tra

APA, Harvard, Vancouver, ISO, and other styles

50

Wang, Yang, Chaoyang Li, Qian Hu, Jabree Flor, and Maryam Jalalitabar. "Routing and Spectrum Allocation in Spectrum-Sliced Elastic Optical Path Networks: A Primal-Dual Framework." Electronics 10, no. 22 (2021): 2809. http://dx.doi.org/10.3390/electronics10222809.

Full text

Abstract:

The recent decade has witnessed a tremendous growth of Internet traffic, which is expected to continue climbing for the foreseeable future. As a new paradigm, Spectrum-sliced Elastic Optical Path (SLICE) networks promise abundant (elastic) bandwidth to address the traffic explosion, while bearing other inherent advantages including enhanced signal quality and extended reachability. The fundamental problem in SLICE networks is to route each traffic demand along a lightpath with continuously and consecutively available sub-carriers, which is known as the Routing and Spectrum Allocation (RSA) pro

APA, Harvard, Vancouver, ISO, and other styles

We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!