Log in

Relevant bibliographies by topics / Solid Ink Density

Contents

Journal articles
Dissertations / Theses
Books
Book chapters
Conference papers
Reports

Academic literature on the topic 'Solid Ink Density'

Author: Grafiati

Published: 3 June 2025

Last updated: 31 July 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Solid Ink Density.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Solid Ink Density"

1

Chetna, Gupta*1 Mohit Kumar2 &. Krishan Kumar3. "COMPARITIVE ANALYSIS OF PRINT CONTRAST OF WHITE OPAQUE NTR AND GOLDEN OPAQUE NTR PRINTED WITH DRY TONER BASED DIGITAL PRINTING PROCESS." GLOBAL JOURNAL OF ENGINEERING SCIENCE AND RESEARCHES 5, no. 11 (2018): 380–85. https://doi.org/10.5281/zenodo.1744956.

Full text

Abstract:

Print contrast may be defined as a method of evaluating and optimizing the density of the ink deposited on the substrate during printing. The ink strength—or print contrast—is determined to take into account the solid ink density, the density of the ink in shadow areas of the image, and the dot gain. Print contrast is calculated by measuring the ink density of a solid area and the ink density in a 75% tint. The print contrast is calculated according to the formula where Ds is the solid area density, and Dt is the tint density. Dt-Ds/Ds. This is first of its kind study where NTR is

APA, Harvard, Vancouver, ISO, and other styles

2

Kesan, Nehar, and Turkun Sahinbaskan. "Elimination of the Solid Graininess Issue with Different Micro-Pattern Structures at Flexo Printing." Applied Sciences 14, no. 18 (2024): 8130. http://dx.doi.org/10.3390/app14188130.

Full text

Abstract:

Flexo printing is a relief printing system, and ink transfers on the solid areas are not transferring well during the printing. That is why graininess is increasing and pinholes are occurring on the solid areas. This is a well-known issue in the flexo printing system. Micro-patterns usually eliminate these pinholes. Using correct micro-patterns allows homogeneous ink laydown and increases solid ink density. Micro-pattern holes behave like gravure cylinders on plate surfaces, and this makes for better ink transfer to the substrate. In this study, a more successful micro-pattern structure than t

APA, Harvard, Vancouver, ISO, and other styles

3

Swati*1, &. Hitesh Garg2. "SOLID INK DENSITY ANALYSIS FOR WEB-FED PUBLICATION PRESSES: A CASE STUDY OF HT MEDIA LTD., LUCKNOW." INTERNATIONAL JOURNAL OF ENGINEERING SCIENCES & RESEARCH TECHNOLOGY 6, no. 7 (2017): 513–15. https://doi.org/10.5281/zenodo.829755.

Full text

Abstract:

This paper throws light on solid ink density analysis which has beentop print quality concern for newspaper printing organizations. Objectives of this paper is to study WAN-IFRA standards used in the newspaper and after final printing the density was evaluated on solid ink patches to match with. For the more accurate evaluations, density is checked at more than one area covering all sides of the newspapers. The density pattern was checked for Cyan, Magenta,Yellow and blacksequentially on newspapers on different towers and deviations were analyzed.

APA, Harvard, Vancouver, ISO, and other styles

4

Peng, Laihu, Hao Fan, Yubao Qi, and Jianqiang Li. "Random Forest-Based Prediction of the Optimal Solid Ink Density in Offset Lithography." Applied Sciences 15, no. 9 (2025): 4830. https://doi.org/10.3390/app15094830.

Full text

Abstract:

Solid ink density is an important control parameter in the manufacturing process of offset prints—the size of which has a significant impact on the color performance of the prints—in which the determination of the optimal solid ink density is critical for the pre-press phase of industrial production. Compared with the traditional method of determining the optimal solid ink density, the current printing equipment used to determine the optimal solid ink density will be faster at improving industrial production efficiency and product quality. To improve the efficiency of determining the optimal s

APA, Harvard, Vancouver, ISO, and other styles

5

Mohit, Kumar* Aman Bhardwaj. "ANALYSIS OF EFFECT OF PRIMER COAT ON SOLID INK DENSITY OF METALIZED SHEETS PRINTED WITH DRY TONER BASED DIGITAL PRINTING." INTERNATIONAL JOURNAL OF ENGINEERING SCIENCES & RESEARCH TECHNOLOGY 5, no. 7 (2016): 1085–87. https://doi.org/10.5281/zenodo.57993.

Full text

Abstract:

The purpose of this analysis is to determine the relationship between primer coat and the solid ink density by printing the primer coated metalized board and non primer coated metalized board with a dry toner based digital printing process. The results showed that there is some effect of primer coat on solid ink density of metalized sheets printed with dry toner based Digital Printing process. The solid ink density of primer coated metalized boards printed was found higher in primer coated boards then the non primer coated boards.

APA, Harvard, Vancouver, ISO, and other styles

6

Deng, Pu Jun, Bo Cheng Cai, and Yu Wang. "Study on the Relationship between Amount of Printing Ink and the Reproduction of Tone." Applied Mechanics and Materials 731 (January 2015): 291–94. http://dx.doi.org/10.4028/www.scientific.net/amm.731.291.

Full text

Abstract:

During the process of printing, the relation between ink amount and the reproduction of tones is focused. There are errors in the results, because the solid density is the subject while there are some difficulties in controlling of ink amount. If it is done in the real production and fine control of ink, the effect of ink amount on the tone replication of the different dot area rate are analyzed, it will be better to provide the basis of printing quality. The experiments were done in the printing machine of Heidelberg SM 52. The ink amount is increased by 5% once to print for many times. Accor

APA, Harvard, Vancouver, ISO, and other styles

7

Li, Ying, Wen Juan Gu, Bang Gui He, and Bei Hai He. "Study on the Effect of Coating Solid on Ink Penetration of Coated Paper." Advanced Materials Research 663 (February 2013): 282–85. http://dx.doi.org/10.4028/www.scientific.net/amr.663.282.

Full text

Abstract:

The objective of this experiment was to investigate the influence of coating solid on surface properties and ink penetration and to characterize the penetration depth through quantitative analysis by laser scanning confocal microscope (LSCM). Fluorescent ink was used to observe and characterize ink penetration and distribution by LSCM. The results implied that the surface properties of coated paper could be adjusted and improved by increasing the coating solid. With the increasing of coating solid, ink penetration depth declined and ink penetration uniformity increased. It could be concluded t

APA, Harvard, Vancouver, ISO, and other styles

8

Ma, Xiao Xu, Xian Fu Wei, and Bei Qing Huang. "The Effect of the Proportion of Prepolymer and Monomer on the Performance of UV Offset Ink." Advanced Materials Research 284-286 (July 2011): 2022–25. http://dx.doi.org/10.4028/www.scientific.net/amr.284-286.2022.

Full text

Abstract:

Prepolymer and monomer which are the main components of the UV ink have significant influence on the performance. By changing the proportion of prepolymer and monomer to make the different kinds of UV offset ink samples, the samples’ flow curve, yield stress, curing rate, glossiness, emulsification ratio, solid density and ink transfer rate were tested. And the effects of the proportion of prepolymer and monomer on the performance of UV offset ink were studied. The results show that with the decrease of prepolymer, the viscosity, yield stress and glossiness of the ink were reduce, and the curi

APA, Harvard, Vancouver, ISO, and other styles

9

Chen, Feng Bao, Yun Zhi Chen, and Zheng Jian Zhang. "Application of Grey Relational Analysis and SVM for Solid Density Control in Offset Color Printing." Applied Mechanics and Materials 262 (December 2012): 302–6. http://dx.doi.org/10.4028/www.scientific.net/amm.262.302.

Full text

Abstract:

Abstract: Some appropriate print samples (according to the ISO standards of ink color values) were selected to set up a mathematical model which showed the relationship between density and color. The model was based on Support Vector Machine algorithm. Another evaluation system was established based on Gray Relation to decide the contribution of K, ΔL*, Δa* and Δb* to density. The final mean square error of the training sample and testing sample was 0.001 and 0.003 respectively. The evaluation system showed that the biggest impact on C，M，Y，K solid ink density was Δa* , ΔL*, K and Δb* respectiv

APA, Harvard, Vancouver, ISO, and other styles

10

Ma, Xiao Xu, Xian Fu Wei, Pei Qing Huang, and Xiao Xue Jia. "The Effects of Prepolymer on the Performance of UV Offset Ink." Advanced Materials Research 174 (December 2010): 421–24. http://dx.doi.org/10.4028/www.scientific.net/amr.174.421.

Full text

Abstract:

By means of simplex-centroid experimental design, three prepolymers EB3700，6358H and 6353-1 were used to define the proportion of composite prepolymers and the performances of the samples of UV offset ink with single prepolymer and composite prepolymers such as flow curve, thixotropy crack index, curing rate, glossiness, ink transfer rate and solid density were studied. The research shows that the ink sample with the prepolymer 6358H has higher viscosity and its thixotropy crack index is higher; the ink sample with the prepolymer 6353-1 has higher glossiness; the ink sample with the prepolymer

APA, Harvard, Vancouver, ISO, and other styles

More sources

Dissertations / Theses on the topic "Solid Ink Density"

1

Tangvichachan, Theera. "Conversion of solid ink density and dot gain specifications into colorimetric specifications /." Online version of thesis, 1993. http://hdl.handle.net/1850/11886.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Pawlow, Eric Matthew. "The effects of fluctuations in solid ink density on color variation for conventional and gray component replacement separations when printing process color on newsprint /." Online version of thesis, 1993. http://hdl.handle.net/1850/11676.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Adamcewicz, Justine E. "A study on the effects of dot gain, print contrast and tone reproduction as it relates to increased solid ink density on stochastically screened images verus conventionally screened images /." Online version of thesis, 1994. http://hdl.handle.net/1850/11989.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Leines, Kevin B. "The influence of the position of a color control bar on a form when determining the most appropriate location to measure variability in solid ink density and dot gain of a printed product /." Online version of thesis, 1990. http://hdl.handle.net/1850/10926.

Full text

APA, Harvard, Vancouver, ISO, and other styles

Books on the topic "Solid Ink Density"

1

Eriksson, Olle, Anders Bergman, Lars Bergqvist, and Johan Hellsvik. Density Functional Theory. Oxford University Press, 2017. http://dx.doi.org/10.1093/oso/9780198788669.003.0001.

Full text

Abstract:

Density functional theory (DFT) has established itself as a very capable platform for modelling from first principles electronic, optical, mechanical and structural properties of materials. Starting out from the Dirac equation for the many-body system of electrons and nuclei, an effective theory has been developed allowing for materials specific and parameter free simulations of non-magnetic and magnetic solid matter. In this Chapter an introduction will be given to DFT, the Hohenberg-Kohn theorems, the Kohn-Sham equation, and the formalism for how to deal with non-collinear magnetism.

APA, Harvard, Vancouver, ISO, and other styles

2

Gräfe, Wolfgang. Relaxation of Stress and Density, Strength (Fatigue). Trans Tech Publications, Limited, 2015.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

3

Grafe, Wolfgang. Relaxation of Stress and Density, Strength (Fatigue). Trans Tech Publications, Limited, 2015.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

4

Eriksson, Olle, Anders Bergman, Lars Bergqvist, and Johan Hellsvik. Aspects of the Solid State. Oxford University Press, 2017. http://dx.doi.org/10.1093/oso/9780198788669.003.0002.

Full text

Abstract:

Symmetries play an important role in the theory of the solid state. As will be developed in this Chapter, DFT calculations for crystalline materials are commonly performed for the irreducible part of the first Brillouin zone, an approach which relies on the use of translational and point group symmetries. Two central properties that result from a calculation in reciprocal space are the wave vector resolved energy spectra, the so called band structure, and the energy resolved density of states. For magnetic materials, atomic magnetic moment moments can be defined and calculated, as well as effe

APA, Harvard, Vancouver, ISO, and other styles

5

Gužela, Štefan, Peter Peciar, Michaela Peciarová, Martin Juriga, Roman Fekete, and martin Peciar. MECHANIKA PARTIKULÁRNYCH LÁTOK - Vlastnosti partikulárnych látok a metódy ich merania. SPEKTRUM Publishing, 2024. https://doi.org/10.61544/abrb4556.

Full text

Abstract:

This book provides a comprehensive overview of particulate materials, their properties, and the engineering principles underlying their processing. Particulate materials, ubiquitous in industries ranging from pharmaceuticals to construction, consist of discrete solid particles. Understanding the unique characteristics of these materials is crucial for designing efficient and effective processing equipment. The book delves into the key factors influencing the behavior of particulate materials, including particle size distribution, shape, surface properties, and inter-particle forces. It explore

APA, Harvard, Vancouver, ISO, and other styles

6

Kübler, Jürgen. Theory of Itinerant Electron Magnetism, 2nd Edition. 2nd ed. Oxford University Press, 2021. http://dx.doi.org/10.1093/oso/9780192895639.001.0001.

Full text

Abstract:

The book, in the broadest sense, is an application of quantum mechanics and statistical mechanics to the field of magnetism. Under certain well-described conditions, an immensely large number of electrons moving in the solid will collectively produce permanent magnetism. Permanent magnets are of fundamental interest, and magnetic materials are of great practical importance as they provide a large field of technological applications. The physical details describing the many-electron problem of magnetism are presented in this book on the basis of the density-functional approximation. The emphasi

APA, Harvard, Vancouver, ISO, and other styles

7

Coppens, Philip. X-Ray Charge Densities and Chemical Bonding. Oxford University Press, 1997. http://dx.doi.org/10.1093/oso/9780195098235.001.0001.

Full text

Abstract:

This book deals with the electron density distribution in molecules and solids as obtained experimentally by X-ray diffraction. It is a comprehensive treatment of the methods involved, and the interpretation of the experimental results in terms of chemical bonding and intermolecular interactions. Inorganic and organic solids, as well as metals, are covered in the chapters dealing with specific systems. As a whole, this monograph is especially appealing because of its broad interface with numerous disciplines. Accurate X-ray diffraction intensities contain fundamental information on the charge

APA, Harvard, Vancouver, ISO, and other styles

8

Nelson, David R., and Ariel Amir. Defects on cylinders: superfluid helium films and bacterial cell walls. Oxford University Press, 2017. http://dx.doi.org/10.1093/oso/9780198789352.003.0016.

Full text

Abstract:

There is a deep analogy between the physics of crystalline solids and the behaviour of superfluids, dating back to the pioneering work of Phillip Anderson, Paul Martin, and others. The stiffness to shear deformations in a periodic crystal resembles the super-fluid density that controls the behaviour of supercurrents in neutral superfluids such as He4. Dislocations in solids have a close analogy with quantized vortices in superfluids. Remarkable recent experiments on the way rod-shaped bacteria elongate their cell walls have focused attention on the dynamics and interactions of point-like dislo

APA, Harvard, Vancouver, ISO, and other styles

9

Launay, Jean-Pierre, and Michel Verdaguer. Basic concepts. Oxford University Press, 2018. http://dx.doi.org/10.1093/oso/9780198814597.003.0001.

Full text

Abstract:

The electronic structure of molecules is described, starting from qualitative Molecular Orbital (MO) theory. After the case of simple atoms and molecules, one treats molecular solids and develops the relation between Molecular Orbital theory and band theory. In both cases, one shows that the electronic structure can influence the geometrical structure, through Jahn–Teller effects or Peierls distortion. The effect of interelectronic repulsion, the central problem of Quantum Chemistry, is put in perspective by a synthetic presentation of different approaches: Hartree–Fock Self-Consistent Field w

APA, Harvard, Vancouver, ISO, and other styles

10

Escudier, Marcel. Fluids and fluid properties. Oxford University Press, 2018. http://dx.doi.org/10.1093/oso/9780198719878.003.0002.

Full text

Abstract:

In this chapter it is shown that the differences between solids, liquids, and gases have to be explained at the level of the molecular structure. The continuum hypothesis makes it possible to characterise any fluid and ultimately analyse its response to pressure difference Δ‎p and shear stress τ‎ through macroscopic physical properties, dependent only upon absolute temperature T and pressure p, which can be defined at any point in a fluid. The most important of these physical properties are density ρ‎ and viscosity μ‎, while some problems are also influenced by compressibility, vapour pressure

APA, Harvard, Vancouver, ISO, and other styles

Book chapters on the topic "Solid Ink Density"

1

Bechstedt, Friedhelm. "Density Functional Theory." In Springer Series in Solid-State Sciences. Springer Berlin Heidelberg, 2014. http://dx.doi.org/10.1007/978-3-662-44593-8_5.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Escribe-Filippini, C., J. P. Pouget, R. Currat, B. Hennion, and J. Marcus. "Neutron studies of the blue bronzes K0.3MoO3 and Rb0.3MoO3." In Charge Density Waves in Solids. Springer Berlin Heidelberg, 1985. http://dx.doi.org/10.1007/3-540-13913-3_187.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Janovec, V., and V. Dvořák. "Multidomain structures of incommensurate phases in CDW states of 2H-TaSe2." In Charge Density Waves in Solids. Springer Berlin Heidelberg, 1985. http://dx.doi.org/10.1007/3-540-13913-3_191.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Travaglini, G., and P. Wachter. "CDW phase mode investigation in the FIR in K0.3MaO3 and band structure calculation." In Charge Density Waves in Solids. Springer Berlin Heidelberg, 1985. http://dx.doi.org/10.1007/3-540-13913-3_195.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Butaud, P., P. Segransan, C. Berthier, and A. Meerschaut. "93Nb NMR study of CDW in (NbSe4)10/3I single crystal." In Charge Density Waves in Solids. Springer Berlin Heidelberg, 1985. http://dx.doi.org/10.1007/3-540-13913-3_196.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Núñez Regueiro, M., J. Lopez Castillo, and C. Ayache. "Thermal conductivity of layered dichalcogenides." In Charge Density Waves in Solids. Springer Berlin Heidelberg, 1985. http://dx.doi.org/10.1007/3-540-13913-3_200.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

Zawadowski, A., I. Tüttõ, S. E. Barnes, P. F. Tua, and J. Ruvalds. "Microscopic theory of interaction of CDW with impurities." In Charge Density Waves in Solids. Springer Berlin Heidelberg, 1985. http://dx.doi.org/10.1007/3-540-13913-3_214.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

Stokes, J. P., Mark O. Robbins, S. Bhattacharya, and R. A. Klemm. "Broadband noise in orthorhombic TaS3." In Charge Density Waves in Solids. Springer Berlin Heidelberg, 1985. http://dx.doi.org/10.1007/3-540-13913-3_222.

Full text

APA, Harvard, Vancouver, ISO, and other styles

9

Reagor, D., S. Sridhar, and G. Grüner. "Inertial dynamics of CDW transport in NbSe3." In Charge Density Waves in Solids. Springer Berlin Heidelberg, 1985. http://dx.doi.org/10.1007/3-540-13913-3_224.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

Brown, Stuart E., George Mozurkewich, and George Grüner. "Subharmonic shapiro steps, devil's staircase, and synchronization in RF-driven CDW conductors." In Charge Density Waves in Solids. Springer Berlin Heidelberg, 1985. http://dx.doi.org/10.1007/3-540-13913-3_227.

Full text

APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Solid Ink Density"

1

Ridwan, Sandra Mayang Dika, Nasaruddin Salam, Rustan Tarakka, and Muhammad Ihsan Mukrim. "Experimental Study of Flow Characteristics and Changes in Density Concentration in Two-Phase (Liquid-Solid) Fluid Systems." In International Conference on Research in Engineering and Science Technology (IC-REST) 2023. Trans Tech Publications Ltd, 2025. https://doi.org/10.4028/p-v5z9cz.

Full text

Abstract:

Indonesia is a country prone to hydrological disasters, with high potentials to mud flows in some areas. The mud flows need to be channeled to the appropriate place, and the piping system is one of the best alternatives. Through this research, the analysis of flow characteristics and changes in the density concentration in two-phase (liquid-solid) fluid systems is presented. One-inch diameter transparent PVC pipe was used as the test pipe. The pressure drop, experimental friction factor, and Reynolds number on the experimental variables show an interesting relation between the variables. At 10

APA, Harvard, Vancouver, ISO, and other styles

2

Syahman, Shaik, Safian Sharif, Mohd Ahmad Zaharuddin Faridh, and Mokhtar Awang. "Non-Destructive Evaluation of Friction Stir Welded Thin Zn-Coated Metal Sheets with Lap-Joint Configuration." In International Conference on X-Rays and Related Techniques in Research and Industry 2023. Trans Tech Publications Ltd, 2025. https://doi.org/10.4028/p-sfc0u0.

Full text

Abstract:

Friction stir welding (FSW) can be classified as a new non-fusion welding technique if compared to other conventional welding techniques. In this study, a thin Zn-coated metal sheet was welded using the FSW technique with a lap-joint configuration. The weld joint was inspected using non-destructive testing (NDT) methods to determine the quality of the weld produced. There are two main parameters used in the experiment, which are rotational speed [RPM] and traverse [mm/min]. The design of the welding experiment is carried out using the surface response technique with the circumscribe central co

APA, Harvard, Vancouver, ISO, and other styles

3

Habib, Md Ahasan, and Bashir Khoda. "Effect of Process Parameters on Cellulose Fiber Alignment in Bio-Printing." In ASME 2019 14th International Manufacturing Science and Engineering Conference. American Society of Mechanical Engineers, 2019. http://dx.doi.org/10.1115/msec2019-3011.

Full text

Abstract:

Abstract Three dimensional (3D) bio-printing or direct writing technique has become a popular tool in tissue engineering applications that uses a computer-controlled process to deposit bio-ink for reproducing 3D tissue. Among multiple bio-printing modal, extrusion-based printing is capable of depositing diverse range of hydrogel materials and their compositions as bio-ink. Both acellular bio-ink and cell-laden bio-ink can be extruded by controlling the writing parameters to achieve high (&gt;80%) cell survivability and density along with spatial precision and accuracy in 3D space. To incre

APA, Harvard, Vancouver, ISO, and other styles

4

Monterde Gascón, Mari Carmen, Lucile Bernadet, Jose Antonio Calero Martinez, Emilio Jimenez-Piqué, Albert Tarancón, and Marc Torrrell Faro. "Mnco2o4 Roll Coating Deposition On SUS445 Interconnects Manufactured By Powder Metallurgy: Electrochemical Test In SOFC Mode And Degradation Test After 750h At 800ºc In SOEC Mode." In Euro Powder Metallurgy 2023 Congress & Exhibition. EPMA, 2023. http://dx.doi.org/10.59499/ep235783264.

Full text

Abstract:

Manganese cobalt oxide spinel ink applied by roll painting on SUS445 steel interconnects are the state-of-the-art coating materials as protective layer to volatile chromium species. MnCo coatings are often sintered in two stages, involving reducing and oxidizing atmospheres, to ensure the desired density. This work shows the design, development and optimization of a functional metal interconnect fabricated by conventional powder metallurgy for solid oxide fuel cell and electrolysers systems (SOFC and SOEL). The efficiency of the final interconnects is evaluated by the electrochemical test of s

APA, Harvard, Vancouver, ISO, and other styles

5

Ghosh, Avishek. "3D Printing of Designed Ultra-Low Loss Microwave Dielectrics for Beyond 5G Applications." In ASME 2022 17th International Manufacturing Science and Engineering Conference. American Society of Mechanical Engineers, 2022. http://dx.doi.org/10.1115/msec2022-85805.

Full text

Abstract:

Abstract Low-temperature sintering ceramics with high dielectric permittivity and low loss are highly valuable to the communication industry. Additive Manufacturing (AM) exhibits excellent potential to process a wide range of engineering materials and deliver complex three-dimensional structures in various scales, with several benefits over traditional manufacturing methods used in electronics manufacturing. Therefore, the advent of AM has offered a radically new way of designing and manufacturing electronic and communication components with tailored performance. In this work, a stable ink has

APA, Harvard, Vancouver, ISO, and other styles

6

Hawkes, Grant L., James E. O’Brien, and Greg G. Tao. "3D CFD Electrochemical and Heat Transfer Model of an Internally Manifolded Solid Oxide Electrolysis Cell." In ASME 2011 International Mechanical Engineering Congress and Exposition. ASMEDC, 2011. http://dx.doi.org/10.1115/imece2011-62582.

Full text

Abstract:

A three-dimensional computational fluid dynamics (CFD) and electrochemical model has been created to model high-temperature electrolysis cell performance and steam electrolysis in an internally manifolded planar solid oxide electrolysis cell (SOEC) stack. This design is being evaluated experimentally at the Idaho National Laboratory (INL) for hydrogen production from nuclear power and process heat. Mass, momentum, energy, and species conservation are numerically solved by means of the commercial CFD code FLUENT. A solid-oxide fuel cell (SOFC) model adds the electrochemical reactions and loss m

APA, Harvard, Vancouver, ISO, and other styles

7

Hawkes, Grant, and Russell Jones. "CFD Model of a Planar Solid Oxide Electrolysis Cell: Base Case and Variations." In ASME/JSME 2007 Thermal Engineering Heat Transfer Summer Conference collocated with the ASME 2007 InterPACK Conference. ASMEDC, 2007. http://dx.doi.org/10.1115/ht2007-32310.

Full text

Abstract:

A three-dimensional computational fluid dynamics (CFD) model has been created to model high-temperature steam electrolysis in a planar solid oxide electrolysis cell (SOEC). The model represents a single cell, as it would exist in an electrolysis stack. Details of the model geometry are specific to a stack that was fabricated by Ceramatec, Inc. and tested at the Idaho National Laboratory. Mass, momentum, energy, and species conservation and transport are provided via the core features of the commercial CFD code FLUENT. A solid-oxide fuel cell (SOFC) module adds the electrochemical reactions and

APA, Harvard, Vancouver, ISO, and other styles

8

Hawkes, Grant, Jim O’Brien, Carl Stoots, Steve Herring, and Mehrdad Shahnam. "Thermal and Electrochemical Three Dimensional CFD Model of a Planar Solid Oxide Electrolysis Cell." In ASME 2005 Summer Heat Transfer Conference collocated with the ASME 2005 Pacific Rim Technical Conference and Exhibition on Integration and Packaging of MEMS, NEMS, and Electronic Systems. ASMEDC, 2005. http://dx.doi.org/10.1115/ht2005-72565.

Full text

Abstract:

A three-dimensional computational fluid dynamics (CFD) model has been created to model high-temperature steam electrolysis in a planar solid oxide electrolysis cell (SOEC). The model represents a single cell, as it would exist in an electrolysis stack. Details of the model geometry are specific to a stack that was fabricated by Ceramatec, Inc. and tested at the Idaho National Laboratory. Mass, momentum, energy, and species conservation and transport are provided via the core features of the commercial CFD code FLUENT. A solid-oxide fuel cell (SOFC) model adds the electrochemical reactions and

APA, Harvard, Vancouver, ISO, and other styles

9

Nakanishi, Hideo, and Kazumi Wada. "Reduction of Surface State Density in InP by Laser Irradiation." In 1992 International Conference on Solid State Devices and Materials. The Japan Society of Applied Physics, 1992. http://dx.doi.org/10.7567/ssdm.1992.pc2-3.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

Iwabuchi, T., Y. Liu, T. Kimura, et al. "Effect of Phase Purity on Dislocation Density of PR-MOVPE-Grown InN." In 2011 International Conference on Solid State Devices and Materials. The Japan Society of Applied Physics, 2011. http://dx.doi.org/10.7567/ssdm.2011.m-1-3.

Full text

APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Solid Ink Density"

1

Gao, Elizabeth, David Pogue, Debbie Lawrence, et al. Temperature-insensitive, high-density lithium-ion batteries. Engineer Research and Development Center (U.S.), 2024. https://doi.org/10.21079/11681/49498.

Full text

Abstract:

Lithium-ion (Li-ion) batteries are a preferred energy storage solution for their generation capacity and power density; however, their chemical in-stability at high temperature raises major concerns relating to their safety, reliability, and lifespan. Over time, natural temperature cycling of Li-ion batteries degrades the depth of discharge and degree of charge that can be achieved, limiting the cell performance and storage capacity as the micro-structure of the anode and cathode interfaces are altered. To ensure safe, continuous, and high-performance Li-ion batteries, improvements are needed

APA, Harvard, Vancouver, ISO, and other styles

2

Limtrakul, Sunun, and Wiwut Tanthapanichakoon. Modeling and simulation of flows in two-phase fluidized systems. The Thailand Research Fund, 1999. https://doi.org/10.58837/chula.res.1999.57.

Full text

Abstract:

This present work aims to investigate the solids motion and fluid flow in a two phase fluidized bed via a discrete particle modeling and simulation. The motion of individual particle is based on the fluid force acting on the particle and the contact force between particles. The contact force is models by using the same analogy of spring, dash-pot and friction slider. In addition, the mixing and segregation in beds containing two types of particles with different densities and different size are also studies. Moreover, the effects of superficial gas velocity and bad geometry on the solids movem

APA, Harvard, Vancouver, ISO, and other styles

3

Szymanski, J. K., and N. A. Mansour. Density sensor for solids component in two phase flow. Natural Resources Canada/ESS/Scientific and Technical Publishing Services, 1986. http://dx.doi.org/10.4095/304877.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Ningthoujam, J., J. K. Clark, T. R. Carter, and H. A. J. Russell. Investigating borehole-density, sonic, and neutron logs for mapping regional porosity variation in the Silurian Lockport Group and Salina Group A-1 Carbonate Unit, Ontario. Natural Resources Canada/CMSS/Information Management, 2024. http://dx.doi.org/10.4095/332336.

Full text

Abstract:

The Oil, Gas and Salt Resources Library (OGSRL) is a repository for data from wells licenced under the Oil, Gas and Salt Resources Act for Ontario. It has approximately 50,000 porosity and permeability drill core analyses on bedrock cores. It also has in analogue format, geophysical logs (e.g., gamma ray, gamma-gamma density, neutron, sonic) from approximately 20,000 wells. A significant challenge for geotechnical and hydrogeological studies of the region is the accessibility of digital data on porosity and permeability. Recent work completed on approximately 12,000 core analyses for the Silur

APA, Harvard, Vancouver, ISO, and other styles

5

Noginov, M. A. The Effects of the Pumping Light Penetration and the Powder Density to the Stimulated Emission in Powders of Solid-State Luminophosphors. Defense Technical Information Center, 1997. http://dx.doi.org/10.21236/ada327951.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Wongkasemjit, Sujitra. Novel synthesis study of high surface area silica : final report. Chulalongkorn University, 2002. https://doi.org/10.58837/chula.res.2002.71.

Full text

Abstract:

The sol-gel transition of tetra-coordinated spirosilicate via hydrolysis and condensation under acidic and basic conditions is examined to elucidate the effect of catalyst, reaction time and temperature on the properties of obtained gel. The main advantage of this process is the low temperature employed, producing a solid network with a high specific surface area. FTIR spectroscopy and TGA analysis were used to characterize the formation of siloxane bonds (Si-O-Si). It is found that spirosilicate can be hydrolyzed under both acid and base catalyzed conditions. The condensation rate to silicate

APA, Harvard, Vancouver, ISO, and other styles

7

Dow, Nick, and Daniel Madrzykowski. Residential Flashover Prevention with Reduced Water Flow: Phase 2. UL's Fire Safety Research Institute, 2021. http://dx.doi.org/10.54206/102376/nuzj8120.

Full text

Abstract:

The purpose of this study was to investigate the feasibility of a residential flashover prevention system with reduced water flow requirements relative to a residential sprinkler system designed to meet NFPA 13D requirements. The flashover prevention system would be designed for retrofit applications where water supplies are limited. In addition to examining the water spray’s impact on fire growth, this study utilized thermal tenability criteria as defined in UL 199, Standard for Automatic Sprinklers for Fire-Protection Service. The strategy investigated was to use full cone spray nozzles that

APA, Harvard, Vancouver, ISO, and other styles

8

Fort, James A., David M. Pfund, David M. Sheen, Richard A. Pappas, and Gerald P. Morgen. Development of Millimeter-Wave Velocimetry and Acoustic Time-of-Flight Tomography for Measurements in Densely Loaded Gas-Solid Riser Flow. Office of Scientific and Technical Information (OSTI), 2007. http://dx.doi.org/10.2172/908956.

Full text

APA, Harvard, Vancouver, ISO, and other styles

9

Gavin, Greg, Paul Inkenbrandt, Trevor Schlossnagle, and Rebecca Molinari. Groundwater of Pahvant Valley, Millard County, Utah. Utah Geological Survey, 2024. http://dx.doi.org/10.34191/ss-173.

Full text

Abstract:

Pahvant Valley, located in Millard County, Utah, encompasses 1610 square miles and includes several small towns, agricultural districts, hot springs, and biologically important wetlands, all heavily reliant on groundwater. This study, conducted by the Utah Geological Survey during 2022 and 2023, aims to define Pahvant Valley’s water recharge and discharge estimates, characterize its primary hydrogeologic units, and describe groundwater recharge and discharge areas. The research includes the collection of groundwater and surface water samples to estimate flow paths, sources of recharge and disc

APA, Harvard, Vancouver, ISO, and other styles

10

Habib, Ayman, Darcy M. Bullock, Yi-Chun Lin, and Raja Manish. Road Ditch Line Mapping with Mobile LiDAR. Purdue University, 2021. http://dx.doi.org/10.5703/1288284317354.

Full text

Abstract:

Maintenance of roadside ditches is important to avoid localized flooding and premature failure of pavements. Scheduling effective preventative maintenance requires mapping of the ditch profile to identify areas requiring excavation of long-term sediment accumulation. High-resolution, high-quality point clouds collected by mobile LiDAR mapping systems (MLMS) provide an opportunity for effective monitoring of roadside ditches and performing hydrological analyses. This study evaluated the applicability of mobile LiDAR for mapping roadside ditches for slope and drainage analyses. The performance o

APA, Harvard, Vancouver, ISO, and other styles

We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!