Log in

Relevant bibliographies by topics / Spraying liquid / Dissertations / Theses

To see the other types of publications on this topic, follow the link: Spraying liquid.

Dissertations / Theses on the topic 'Spraying liquid'

Author: Grafiati

Published: 28 May 2022

Last updated: 31 July 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the top 21 dissertations / theses for your research on the topic 'Spraying liquid.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Browse dissertations / theses on a wide variety of disciplines and organise your bibliography correctly.

1

Youssef, Rageey M. "Modeling the effect of a spray on a liquid film on a heated surface." Morgantown, W. Va. : [West Virginia University Libraries], 2007. https://eidr.wvu.edu/etd/documentdata.eTD?documentid=5074.

Full text

Abstract:

Thesis (Ph. D.)--West Virginia University, 2007.<br>Title from document title page. Document formatted into pages; contains xv, 136 p. : ill. (some col.). Vita. Includes abstract. Includes bibliographical references (p. 100-105).

APA, Harvard, Vancouver, ISO, and other styles

2

Heising, Raymond. "Effectiveness of pulsed spray combustion for suppression of combustion instabilities." Thesis, Georgia Institute of Technology, 1999. http://hdl.handle.net/1853/16682.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Huneiti, Zayed Ali. "Electrohydrodynamic atomisation of conducting liquid using an AC field superimposed on a DC field." Thesis, Brunel University, 2000. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.327113.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Kushari, Abhijit. "Study of an internally mixed liquid injector for active control of atomization process." Diss., Georgia Institute of Technology, 2000. http://hdl.handle.net/1853/15928.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Reichel, Jonathan R. "Parametric study of liquid fuel jet in crossflow at conditions typical of aerospace applications." Thesis, Atlanta, Ga. : Georgia Institute of Technology, 2008. http://hdl.handle.net/1853/22590.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Ganvir, Ashish. "Microstructure and Thermal Conductivity of Liquid Feedstock Plasma Sprayed Thermal Barrier Coatings." Licentiate thesis, Högskolan Väst, Avd för tillverkningsprocesser, 2016. http://urn.kb.se/resolve?urn=urn:nbn:se:hv:diva-9061.

Full text

Abstract:

Thermal barrier coating (TBC) systems are widely used on gas turbine components to provide thermal insulation and oxidation protection. TBCs, incombination with advanced cooling, can enable the gas turbine to operate at significantly higher temperatures even above the melting temperature of the metallic materials. There is a permanent need mainly of environmental reasons to increase the combustion turbine temperature, hence new TBC solutions are needed.By using a liquid feedstock in thermal spraying, new types of TBCs can be produced. Suspension plasma/flame or solution precursor plasma sprayi

APA, Harvard, Vancouver, ISO, and other styles

7

Cherniak, Leonid Mykhailovych, Леонид Михайлович Черняк, Леонід Михайлович Черняк, О. В. Самков та С. О. Фалько. "Вибір конструкції розпилювача рідини для вихрової камери". Thesis, Видавництво СумДУ, 2008. http://essuir.sumdu.edu.ua/handle/123456789/4214.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

Caruyer, Céline. "Modélisation de nanomatériaux injectés par voie liquide dans un jet de plasma pour la fabrication de nanostructures." Thesis, Bordeaux 1, 2011. http://www.theses.fr/2011BOR14329/document.

Full text

Abstract:

Ce travail porte sur l’étude du procédé de projection plasma par voie liquide et en particulier sur l’interaction entre la phase liquide et l’écoulement de plasma. Différents phénomènes physiques ont lieu comme la fragmentation du jet, l’évaporation du liquide et la fusion des particules. La simulation numérique permet de mieux comprendre les phénomènes physiques et vient en appui des expériences qui sont parfois difficiles voire impossibles à réaliser. Un modèle compressible diphasique est développé afin de prendre en compte les effets compressibles du plasma. Des validations sont réalisées s

APA, Harvard, Vancouver, ISO, and other styles

9

Speranza, Antonio. "Electrohydrodynamic spraying of highly conductive and viscous liquids." Thesis, University of Surrey, 2002. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.288774.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

Loebker, David W. "Effervescent spraying of high viscosity fluids." Diss., Georgia Institute of Technology, 1998. http://hdl.handle.net/1853/7041.

Full text

APA, Harvard, Vancouver, ISO, and other styles

11

Krowka, Joanna. "Etude des modes de résonance d'une torche à plasma d'arc associée à une injection synchrone pour la réalisation de dépôts par voie liquide." Thesis, Limoges, 2014. http://www.theses.fr/2014LIMO0014/document.

Full text

Abstract:

La projection par plasma d'arc de suspension permet d'obtenir des revêtements finement structurés à gradients de propriétés qui répondent aux besoins, par exemple, des applications photocatalytiques, les piles à combustible à oxyde solide ou les revêtements de barrière thermique. Cependant, les torches à plasma, même alimentées par dessources de courant continu régulé, génèrent des jets de plasma fortement fluctuants. Ces instabilités causent des variations importantes dans les transferts thermiques et dynamiques des particules, ce qui diminue la fiabilité et la reproductibilité de la méthode.

APA, Harvard, Vancouver, ISO, and other styles

12

Cado, Gwenaëlle. "Étude physico-chimique, fonctionnalisation et applications des films de polysaccharides." Phd thesis, Université de Strasbourg, 2012. http://tel.archives-ouvertes.fr/tel-00859416.

Full text

Abstract:

En France, 5 % des patients hospitalisés contractent une infection nosocomiale. Pour lutter contre ce problème, nous avons développé un nouveau type de films biocompatibles, pouvant être fonctionnalisés, à base de polysaccharides construit par pulvérisation alternée ou simultanée pour les utiliser comme revêtements d'implants biomédicaux. La pulvérisation, issue du dépôt couche-par-couche de polyanions et de polycations, permettent un gain de temps conséquent.D'abord, la complexation du couple chitosane/acide hyaluronique et le dépôt de multicouches sur ces complexes ont été étudiés. Puis, nou

APA, Harvard, Vancouver, ISO, and other styles

13

Yeh, Norman Kirk. "Liquid phase mass transfer in spray contactors." 2002. http://wwwlib.umi.com/cr/utexas/fullcit?p3089488.

Full text

APA, Harvard, Vancouver, ISO, and other styles

14

Sun-SiaoJhu and 朱孫孝. "Fabrication of Slippery Liquid-Infuse Porous/Textured SiO2 Surface by Spraying and Electrospinning." Thesis, 2016. http://ndltd.ncl.edu.tw/handle/72877891073360188232.

Full text

Abstract:

碩士<br>國立成功大學<br>化學工程學系<br>104<br>In this study, the water/oil-repellent Slippery Liquid Infused Porous Surface (SLIPS) with low sliding angle of water (〈3∘) and oleic acid (〈8∘) was fabricated by infusing the lubricant(Perfluoropolyether, Solvay, Fomblin M03) onto the fluorinated SiO2 textured substrates. The substrates were fabricated in two different ways. One is spraying the silica particle on the silicone gel and then curing the gel to bind the particle and form the texture substrate. Another method is fabricating the silica fiber mat by electrospinning as porous substrate. The substrates

APA, Harvard, Vancouver, ISO, and other styles

15

Marr, Michael Anderson. "Fabrication of Metal-supported Solid Oxide Fuel Cell Electrolytes by Liquid-feed Plasma Spraying." Thesis, 2013. http://hdl.handle.net/1807/43659.

Full text

Abstract:

Research was performed on the development of metal-supported solid oxide fuel cell (SOFC) electrolytes by suspension and solution precursor plasma spraying (SPS and SPPS). Experiments were conducted to understand the effects of many plasma-, feedstock-, and substrate-related process parameters on the microstructure, permeability, and conductivity of the resulting coatings. Most work was performed with yttria-stabilized zirconia (YSZ), but samaria-doped ceria (SDC) was also considered. The plasma-to-substrate heat flux behaviour of the process is particularly relevant for producing dense

APA, Harvard, Vancouver, ISO, and other styles

16

Hsiao, Chi-Lin, та 蕭祺霖. "Fabrication of array-type dopamine sensors using ultrasonic liquid atomizer for spraying γ-APTES/SiO2 bionanocomposite". Thesis, 2013. http://ndltd.ncl.edu.tw/handle/72399870932952718484.

Full text

Abstract:

碩士<br>國立暨南國際大學<br>應用材料及光電工程學系<br>101<br>The purpose of the thesis is to use the ultrasonic liquid atomizer to spray the sensing membrane of a mixture of 3-aminopropyltriethoxysilane (γ-APTES) and polydimethylsiloxane (PDMS)-treated hydrophobic fumed silica nanoparticles (NPs) onto a polysilicon wire (PSW), investigating the characteristics of electrical interference of the PSW in detectingthe nerve substance of dopamine. The ultrasonic liquid atomizer we used might rapidly spray the γ-APTES+NPs onto the PSW with the advantages of large-area production as well as with good uniformity of th

APA, Harvard, Vancouver, ISO, and other styles

17

Fuxiao, Yu. "Development Of Liquid Phase Co-Spray Forming And Its Application To AI-Si-Pb Alloys." Thesis, 1997. https://etd.iisc.ac.in/handle/2005/1795.

Full text

APA, Harvard, Vancouver, ISO, and other styles

18

Fuxiao, Yu. "Development Of Liquid Phase Co-Spray Forming And Its Application To AI-Si-Pb Alloys." Thesis, 1997. http://etd.iisc.ernet.in/handle/2005/1795.

Full text

APA, Harvard, Vancouver, ISO, and other styles

19

Rakesh, P. "A Study of the Characteristics of Gas-On-Liquid Impinging Injectors." Thesis, 2014. http://etd.iisc.ac.in/handle/2005/3126.

Full text

Abstract:

The work presented here pertains to investigations on gas-on-liquid type of impinging injectors with a generic approach with prospective applications in several areas, and at places with particular emphasis on cryogenic or semi-cryogenic liquid propellant rockets. In such rockets, one of the components arrives at the injector in a gaseous phase after passing through the regenerative coolant passages or a preceding combustion stage. Most often, the injectors in such systems are of shear coaxial type. The shear coaxial injectors suffer from several disadvantages like complexity in design, manufa

APA, Harvard, Vancouver, ISO, and other styles

20

Rakesh, P. "A Study of the Characteristics of Gas-On-Liquid Impinging Injectors." Thesis, 2014. http://hdl.handle.net/2005/3126.

Full text

Abstract:

The work presented here pertains to investigations on gas-on-liquid type of impinging injectors with a generic approach with prospective applications in several areas, and at places with particular emphasis on cryogenic or semi-cryogenic liquid propellant rockets. In such rockets, one of the components arrives at the injector in a gaseous phase after passing through the regenerative coolant passages or a preceding combustion stage. Most often, the injectors in such systems are of shear coaxial type. The shear coaxial injectors suffer from several disadvantages like complexity in design, manufa

APA, Harvard, Vancouver, ISO, and other styles

21

Jhao, Jyun-Jie, and 趙俊傑. "Research on the Effect of Spraying Method of Dehumidification Tower and the Proportion of Mixed Solution on the Performance of Liquid Dehumidification." Thesis, 2017. http://ndltd.ncl.edu.tw/handle/q7fbsq.

Full text

Abstract:

碩士<br>國立勤益科技大學<br>冷凍空調系<br>105<br>Due to the emergence of serious high temperature and high humidity problems in many regions and the limited dehumidification capability and high energy consumption of the generally traditional air-conditioner, the concept of independent humidity control is emphasized and liquid dehumidification is gradually widely applied. This experiment used the Orthogonal Array of Taguchi Method to arrange the experimental parameters and discussed the effect of different spray heads on liquid dehumidification system, so as to find out the optimized parameter combination wit

APA, Harvard, Vancouver, ISO, and other styles

We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!