To see the other types of publications on this topic, follow the link: Spraying liquid.

Journal articles on the topic 'Spraying liquid'

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the top 50 journal articles for your research on the topic 'Spraying liquid.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Browse journal articles on a wide variety of disciplines and organise your bibliography correctly.

1

Tikkanen, J., V. Pitkänen, J. Larjo, et al. "Liquid flame spraying." Journal of Aerosol Science 26 (September 1995): S229—S230. http://dx.doi.org/10.1016/0021-8502(95)97022-7.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Decaro, Ricardo Augusto, Sergio Tadeu Decaro Junior, and Marcelo da Costa Ferreira. "Deposit of pesticides without and with adjuvants on citrus seedlings following different intervals of artificial rain." Ciência Rural 46, no. 1 (2016): 13–19. http://dx.doi.org/10.1590/0103-8478cr20150064.

Full text
Abstract:
ABSTRACT: For a crop protection product to achieve its goal, the product must be applied and remain on the leaves until it is absorbed. This situation may be compromised due to rainfall after spraying, thus necessitating reapplication which increase the overall cost. Application technology research has focused on alternatives and solutions to mitigate this effect through the use of adjuvants. The objective of this research was to evaluate the deposit of spraying liquid on citrus seedlings using the products spirodiclofen, propargite, imidacloprid, lambda cyhalothrin, copper oxychloride, and co
APA, Harvard, Vancouver, ISO, and other styles
3

Song, Shu Ran, Yao Can Ruan, Zhen Li, Tian Sheng Hong, and Cheng Zhang. "Test Research of Pipeline Spraying Constant Pressure Controlling in Orchard." Advanced Materials Research 308-310 (August 2011): 1162–65. http://dx.doi.org/10.4028/www.scientific.net/amr.308-310.1162.

Full text
Abstract:
The spraying efficiency can be greatly improved by using pipeline spraying in larger orchard, meanwhile, labor strength could be reduced greatly and the pest control efficacy could be improved. Adopting constant pressure control devices can improve the stability of liquid pressure in pipeline, reduce the liquid pressure fluctuation which caused by the changing of spraying nozzles number. The spraying experimentations were carried in orchard by using constant pressure controller. Experimental result indicated that, using the constant pressure control device, the control error was 0.0167Mpa, the
APA, Harvard, Vancouver, ISO, and other styles
4

Neumann, Taylor, Berra Kara, Yasaman Sargolzaeiaval, et al. "Aerosol Spray Deposition of Liquid Metal and Elastomer Coatings for Rapid Processing of Stretchable Electronics." Micromachines 12, no. 2 (2021): 146. http://dx.doi.org/10.3390/mi12020146.

Full text
Abstract:
We report a spray deposition technique for patterning liquid metal alloys to form stretchable conductors, which can then be encapsulated in silicone elastomers via the same spraying procedure. While spraying has been used previously to deposit many materials, including liquid metals, this work focuses on quantifying the spraying process and combining it with silicones. Spraying generates liquid metal microparticles (~5 μm diameter) that pass through openings in a stencil to produce traces with high resolution (~300 µm resolution using stencils from a craft cutter) on a substrate. The spraying
APA, Harvard, Vancouver, ISO, and other styles
5

Rozina, E. Yu. "Capillary Vibrational Spraying of Liquid." International Journal of Fluid Mechanics Research 32, no. 3 (2005): 369–81. http://dx.doi.org/10.1615/interjfluidmechres.v32.i3.90.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Aleksandrov, V. A. "String wave spraying of liquid." Technical Physics Letters 29, no. 5 (2003): 438–40. http://dx.doi.org/10.1134/1.1579819.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Vasilyev, A. A., S. A. Vasilyev, and N. P. Shkilev. "Mechanized spraying of liquid meliorants." IOP Conference Series: Earth and Environmental Science 421 (January 7, 2020): 032026. http://dx.doi.org/10.1088/1755-1315/421/3/032026.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Asano, Kazutoshi. "Electrostatic spraying of liquid pesticide." Journal of Electrostatics 18, no. 1 (1986): 63–81. http://dx.doi.org/10.1016/0304-3886(86)90016-1.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Lei, Han, Ge Li, Fei Wang, Tiejun Chen, Li Ten, and Yong Ding. "An Experimental Study on the Effect of Liquid Concentration on the Atomization Performance of Low-pressure Atomizing Nozzles." Journal of Physics: Conference Series 2383, no. 1 (2022): 012034. http://dx.doi.org/10.1088/1742-6596/2383/1/012034.

Full text
Abstract:
in order to study the phenomenon and mechanism of paint low-pressure atomization spraying and improve the spraying technology, the effect of liquid concentration on the atomization performance of low-pressure atomizer was studied. In this paper, an experimental platform for measuring the spraying of low-pressure atomizing nozzle was built. Mixing the same paint with clean water to obtain liquids of three different concentrations and using them as the mediums respectively, the flow, the atomization angle and the atomization characteristics of low-pressure fine atomizing nozzle with aperture of
APA, Harvard, Vancouver, ISO, and other styles
10

Леонтьев, В. К. "ON THE EFFECTIVENESS OF THE PROCESS OF SPRAYING LIQUID TO PRODUCE LARGE DROPLETS." Южно-Сибирский научный вестник, no. 5(51) (October 31, 2023): 199–201. http://dx.doi.org/10.25699/sssb.2023.51.5.028.

Full text
Abstract:
Распыливание жидкостей применяются во многих отраслях промышленности. Реализуемые на практике в настоящее время способы распыливания жидкостей основаны на использовании различных способов подвода энергии. Выбор способа распыливания определяется назначением процесса, конструкцией аппарата и взаимодействием образующихся капель с другими средами в аппарате, а также затратам энергии на проведение процесса. Основными способами распыливания являются гидравлический и механический. При гидравлическом распыливании основным фактором энергетического воздействия, приводящим к распаду жидкости на капли, яв
APA, Harvard, Vancouver, ISO, and other styles
11

Hidayah, Baiq Nurul, Muhammad Tahir Hamsyah, Mohammad Rani, et al. "Respons Bawang Putih pada Berbagai Frekuensi Penyemprotan Pupuk Cair Organik Mikro." Agrotechnology Research Journal 8, no. 1 (2024): 58–65. https://doi.org/10.20961/agrotechresj.v8i1.92416.

Full text
Abstract:
Garlic is a horticultural commodity with high economic value in Indonesia. For optimal growth and yield, garlic plants need macro and micronutrients from fertilization. Micronutrients can be fulfilled, such as by spraying micro-organic liquid fertilizer. This research aims to determine the effect of various spraying frequencies of Micro Organic Liquid Fertilizer – Micro Magic (PCOM-MM) on the growth of garlic plants. The garlic variety planted was local Sangga Sembalun using a 1-factor Randomized Block Design with 4 treatments of spraying frequencies: 1) without spraying PCOM-MM, 2) spraying P
APA, Harvard, Vancouver, ISO, and other styles
12

Sun, Xuan, Yan Zhang, Cheng Long Tang, Hong Hua Zhao, and Chang Sheng Ai. "Development of the Field of Wheat Plant Protection Precision Spraying Robot Control System." Applied Mechanics and Materials 851 (August 2016): 427–32. http://dx.doi.org/10.4028/www.scientific.net/amm.851.427.

Full text
Abstract:
In view of shortcomings of the wheat field spraying, such as low accuracy, liquid waste, spraying uneven and land pollution, developed with C310 industrial controller as the core field of wheat plant protection precision spraying robot control system. The system according to the sensor detects the plant protection robot walking speed and liquid pressure, dynamic adjusting nozzle spray amount, in order to achieve accurate, efficient and intelligent spraying. Through test, actual and theory of the amount spraying quantity error is less than 5%, the result meets the requirements of the job, so th
APA, Harvard, Vancouver, ISO, and other styles
13

Appah, Samuel, Weidong Jia, Mingxiong Ou, Pei Wang, and Chen Gong. "Investigation of Optimum Applied Voltage, Liquid Flow Pressure, and Spraying Height for Pesticide Application by Induction Charging." Applied Engineering in Agriculture 35, no. 5 (2019): 795–804. http://dx.doi.org/10.13031/aea.13358.

Full text
Abstract:
Abstract. Superposition of charges to pesticide spray droplets by electrostatic induction principle plays an important role in plant protection. It influences spray droplets characteristics, deposition and wraparound effect on leaf surfaces. Hence, an adoption of optimum parameters combination will improve spraying effectiveness to reduce pesticide wastage and environmental pollution. This article investigated the effect of 0-12 kV applied voltages, 2-4 bar liquid flow pressures, and 20-60 cm spraying height regimes on spray chargeability, droplet sizes, spray swath, and droplets deposition wh
APA, Harvard, Vancouver, ISO, and other styles
14

Sari, Yulia P., Samharnto Samharinto, and Bambang F. Langai. "PENGGUNAAN ASAP CAIR TANDAN KOSONG KELAPA SAWIT (TKKS) SEBAGAI PESTISIDA NABATI UNTUK MENGENDALIKAN HAMA PERUSAK DAUN TANAMAN SAWI (Brassica juncea L.)." EnviroScienteae 14, no. 3 (2018): 272. http://dx.doi.org/10.20527/es.v14i3.5699.

Full text
Abstract:
The aims of this research are to identify the dominant type of pest that attack mustard plants, to identify the component of liquid smoke of oil palm empty fruit bunches, to examine the effects of interaction between concentration level and frequency of application of liquid smoke spraying to the intensity of leaf damaging pests attack on mustard plants, to examine the effects of some concentration level and frequency of application of liquid smoke spraying severally to the intensity of leaf damaging pests attack on mustard plants, and to determine effective concentration and frequency of appl
APA, Harvard, Vancouver, ISO, and other styles
15

Gross, K. A., J. Tikkanen, J. Keskinen, et al. "Liquid Flame Spraying for Glass Coloring." Journal of Thermal Spray Technology 8, no. 4 (1999): 583–89. http://dx.doi.org/10.1361/105996399770350287.

Full text
APA, Harvard, Vancouver, ISO, and other styles
16

Pimenoff, J. A., A. K. Hovinen, and M. J. Rajala. "Nanostructured coatings by liquid flame spraying." Thin Solid Films 517, no. 10 (2009): 3057–60. http://dx.doi.org/10.1016/j.tsf.2008.11.082.

Full text
APA, Harvard, Vancouver, ISO, and other styles
17

Dragojlovic, Danka, Lato Pezo, Dusica Colovic, et al. "Application of soybean oil and glycerol in animal feed production, ANN model." Acta Periodica Technologica, no. 50 (2019): 51–58. http://dx.doi.org/10.2298/apt1950051d.

Full text
Abstract:
In the past few decades the diet preparation in feed production has evolved towards more complicated technological operations, which include different liquid addition. A wide scale of different liquids is used in contemporary animal feed production, from oils and glycerol to more expensive products in a liquid form, such as enzymes, flavourings, amino acids, vitamins and others. In the presented study the liquid addition in feed production was observed, with a specific goal to investigate the spraying systems in order to better understand the effects of fluids, such as soybean oil and glycerol
APA, Harvard, Vancouver, ISO, and other styles
18

Mlkvik, Marek. "Unsteady Behaviour of the Effervescent Atomizer." MATEC Web of Conferences 328 (2020): 01008. http://dx.doi.org/10.1051/matecconf/202032801008.

Full text
Abstract:
The effervescent atomizer is a well-established type of the twin-fluid nozzle with internal mixing of fluids. It is popular for the ability to process highly viscous liquids, such as liquid fuels, into a fine spray with low gas consumption. This study aims to investigate the performance of the effervescent nozzle when spraying the liquids with a viscosity up to 308 mPa·s. The working parameters of the nozzle were defined by the mass flows ratio of the gas to the liquid (GLR =2.5 to 20 %) and the gas pressure at the nozzle inlet (Δp = 0.14 MPa). The spray quality was investigated by the laser d
APA, Harvard, Vancouver, ISO, and other styles
19

Sasaki, Robson Shigueaki, Mauri Martins Teixeira, Haroldo Carlos Fernandes, Paulo Marcos de Barros Monteiro, Denílson Eduardo Rodrigues, and Cleyton Batista de Alvarenga. "Parameters of electrostatic spraying and its influence on the application efficiency." Revista Ceres 60, no. 4 (2013): 474–79. http://dx.doi.org/10.1590/s0034-737x2013000400005.

Full text
Abstract:
When the electrostatic spraying is used correctly, it provides advantages over conventional systems, however many factors can affect the system efficiency. Therefore, the objective of this study was to evaluate the charge/mass ratio (Q/M) at different spraying distances (0, 1, 2, 3, 4 and 5 m), and the liquid deposition efficiency on the target. Evaluating the Q/M ratio the Faraday cage method was used and to evaluate the liquid deposition efficiency the artificial targets were positioned longitudinally and transversely to the spray jet. It was found that the spraying distance affects the Q/M
APA, Harvard, Vancouver, ISO, and other styles
20

KOZHEVNIKOVA, NATALYA G. "EXPERIMENTAL STUDY OF THE CONDITIONS OF SPRAYING LIQUIDS WITH THE AIR FLOW." Agricultural engineering, no. 6 (2021): 32–37. http://dx.doi.org/10.26897/2687-1149-2021-6-32-37.

Full text
Abstract:
The processes of air movement in various types of air ducts are of great practical interest in terms of designing, manufacturing, and installing spraying devices used in agricultural production to create artificial fog with fi ne sprinkling and treat crops from pests and diseases. The authors analyze the existing methods of liquid spraying and reveal their main advantages and disadvantages. Under special attention is the pneumatic method. The study found that this method is used to spray contaminated liquids and the spray quality insignificantly depends on the liquid flow rate. It was revealed
APA, Harvard, Vancouver, ISO, and other styles
21

Edy, Edy, Amir Tjoneng, St Subaedah, Anita Rahman, and Suraedah Alimuddin. "RESPON PERTUMBUHAN DAN PRODUKSI TANAMAN JAGUNG PULUT TERHADAP PERLAKUAN PRUNING TONGKOL KEDUA DAN PENYEMPROTAN PUPUK PELENGKAP CAIR." AGROTEK: Jurnal Ilmiah Ilmu Pertanian 8, no. 2 (2024): 202–10. http://dx.doi.org/10.33096/agrotek.v8i2.629.

Full text
Abstract:
This study was conducted to determine the response of corn plants to the second cob pruning treatment and liquid complementary fertilizer (LCF) spraying on the Growth and Production of Waxy Corn Plants (Zea mays ceratina L.). This study was conducted at the Experimental Garden of Pabentengan Bajeng Village, Gowa Regency, South Sulawesi, from September to December 2018. The materials used in this study were local waxy corn seeds, liquid complementary fertilizer (Bram Evolution) urea and NPK fertilizer. The Split Plot Design method was used. The main plot is without pruning and with pruning, whi
APA, Harvard, Vancouver, ISO, and other styles
22

Еськин and A. Es'kin. "Dissolved Air Flotation with Spraying of Liquid." Safety in Technosphere 6, no. 2 (2017): 48–55. http://dx.doi.org/10.12737/article_598d7a13c2fa37.78420590.

Full text
Abstract:
This paper presents a new method of dissolved air flotation with spraying of liquid. Liquid that needs cleaning is sprayed inside an overhead reservoir through a hydraulic nozzle allowing to enlarge the contact area between phases in comparison with traditional method of saturation by barbotage. Suggested method makes it possible to increase the gas content of the liquid processed for cleaning into a flotation section. This paper also contains the results of experimental investigation of the effectiveness of liquid saturation inside the overhead reservoir using spray-centrifugal and spray-perc
APA, Harvard, Vancouver, ISO, and other styles
23

Tenu, Ioan, Andreea Diaconu, Radu Rosca, and Tibor Rittner. "Researches Regarding the Improvement of the Design for Vineyard Spraying Equipment." Applied Mechanics and Materials 659 (October 2014): 539–44. http://dx.doi.org/10.4028/www.scientific.net/amm.659.539.

Full text
Abstract:
Pest and disease control in vineyards and orchards is a key feature for obtaining healthy and economically efficient crops, spraying equipments being widely used for plant protection. The technical performance of the spraying equipment has a significant effect over the efficiency indices of the plant protection methods: specific consumption of chemical solution, working capacity of the spraying units, fuel consumption, homogeneity of distribution over the entire foliage system etc. In this paper a new design of the vineyard spraying equipment was investigated, aiming for the partial recovery o
APA, Harvard, Vancouver, ISO, and other styles
24

Zhang, Weng, Ding, and Qian. "Use of Genetically Modified Bacteria to Repair Cracks in Concrete." Materials 12, no. 23 (2019): 3912. http://dx.doi.org/10.3390/ma12233912.

Full text
Abstract:
In this paper, we studied the crack-repair by spraying bacteria-based liquid around the cracks in concrete. To enhance the repair efficiency and speed up the repair process, the transposon mutagenesis method was employed to modify the genes of Bacillus halodurans and create a mutant bacterial strain with higher efficiency of calcium carbonate productivity by catalyzing the combination of carbonate and calcium ion. The efficiency of crack-repairing in concrete by spraying two kinds of bacterial liquid was evaluated via image analysis, X-ray computed tomography (X-CT) scanning technology and the
APA, Harvard, Vancouver, ISO, and other styles
25

Yu, Haicheng, Xinkun Suo, Yongfeng Gong, et al. "Ti3AlC2 coatings deposited by liquid plasma spraying." Surface and Coatings Technology 299 (August 2016): 123–28. http://dx.doi.org/10.1016/j.surfcoat.2016.04.076.

Full text
APA, Harvard, Vancouver, ISO, and other styles
26

Woosley, J. P., R. J. Turnbull, and K. Kim. "Field injection electrostatic spraying of liquid hydrogen." Journal of Applied Physics 64, no. 9 (1988): 4278–84. http://dx.doi.org/10.1063/1.341301.

Full text
APA, Harvard, Vancouver, ISO, and other styles
27

Taufik, Akhmad, Imran Habriansyah, Fachturrahman Fachturrahman, and Hutomo F. R. Sumbung. "Drone Untuk Deteksi Hama dan Penyemprotan Pestisida pada Tanaman Padi." Jurnal Teknik Mesin Sinergi 20, no. 2 (2022): 1. http://dx.doi.org/10.31963/sinergi.v20i2.3737.

Full text
Abstract:
As the population increases, rice consumption will also increase. Therefore, the productivity of rice must be increased. However, the productivity of rice usually declines due to the brown planthopper. This study aims to create an image processing algorithm on a drone so that it can detect the color of rice leaves that are attacked by brown planthoppers and to create a mechanism for spraying insecticides. The methodology in this research begins with the design of mechanical and electronic systems on drones and spraying mechanisms, to the design of color detection programs and spraying mechanis
APA, Harvard, Vancouver, ISO, and other styles
28

Ahmed, Shibbir, Baijing Qiu, Chun-Wei Kong, Huang Xin, Fiaz Ahmad, and Jinlong Lin. "A Data-Driven Dynamic Obstacle Avoidance Method for Liquid-Carrying Plant Protection UAVs." Agronomy 12, no. 4 (2022): 873. http://dx.doi.org/10.3390/agronomy12040873.

Full text
Abstract:
Autonomous sprayer UAVs are one of the most used aerial machines in modern agriculture. During flight missions, some common narrow obstacles appear in the flying zone. These are non-detectable from satellite images and one of the biggest challenges for autonomous sprayer UAVs in farmland. This work introduces an obstacle avoidance architecture specifically for sprayer UAVs. This architecture has generality in the spraying UAV problem, and it reduces the reliance on the global mapping of farmland. This approach computes the avoiding path based on the onboard sensor fusion system in real-time. M
APA, Harvard, Vancouver, ISO, and other styles
29

Jamjareegulgarn, Punyawi, Udomsak Phonhirun, Adipong Jareonroop, and Siwarak Suthirak. "Vertical Assembled Sprayer for Supplying Water and Liquid Fertilizer." Applied Mechanics and Materials 709 (December 2014): 52–55. http://dx.doi.org/10.4028/www.scientific.net/amm.709.52.

Full text
Abstract:
This paper proposes a vertical assembled sprayer for supplying water and liquid fertilizer. This proposed sprayer consists of both iron structure and hardware modules, including a microcon-troller, LCD, keypad, batteries, nozzles, and diaphragm pumps. The height of this proposed sprayer ranges from 1.5 to 4.5 meters so as to be adjusted by a user. The water quantity and the nozzle numbers can be specified by a user’s demand. Moreover, either manual or automatic operations can also be selected by a user. The experimental results have been shown that the average spraying times for using 1 - 4 no
APA, Harvard, Vancouver, ISO, and other styles
30

Khmelev, Vladimir N., Andrey V. Shalunov, and Dmitry V. Genne. "Justification and implementation of the layer thickness control method in ultrasonic spraying." Bulletin of the Tomsk Polytechnic University Geo Assets Engineering 335, no. 11 (2024): 7–18. http://dx.doi.org/10.18799/24131830/2024/11/4441.

Full text
Abstract:
Relevance. The need for the development and widespread use of the ultrasonic spraying method, which has unique advantages, to solve the most pressing problems of modern industry. In particular: minimal, of all known methods, energy consumption for the implementation of the process, the possibility of forming fine droplets without the use of gas under pressure, regulating the dispersion of the formed aerosol by the parameters of the emitter, etc. However, for widespread practical use of the ultrasonic spraying method, it is necessary to ensure spraying conditions with a specified dispersion and
APA, Harvard, Vancouver, ISO, and other styles
31

Ternovyi, Yu F., S. A. Vodennikov, and O. S. Vodennikova. "Inert gas absorption and pore formation in nickel-based hot-melt alloys." Metaloznavstvo ta obrobka metalìv 97, no. 1 (2021): 20–27. http://dx.doi.org/10.15407/mom2021.01.020.

Full text
Abstract:
An integrated approach to the generalization and analysis of scientific and technical literature in the direction of improving the technological processes of spraying metal melts used a comprehensive approach The processing and analysis of experimental data for the determination of argon at different stages of heat-resistant alloy production were performed. Micro structural analysis of nickel-based heat-resistant alloys obtained by gas and centrifugal spraying was performed. A significant increase in the mass fraction of argon in the melt is shown when held in a furnace before gas or centrifug
APA, Harvard, Vancouver, ISO, and other styles
32

Zhukov, E. Yu, A. S. Naurzalinov, and I. N. Pashkov. "Study of centrifugal atomisation mechanisms based on a simulated experiment." Frontier materials & technologies, no. 4 (2024): 39–49. https://doi.org/10.18323/2782-4039-2024-4-70-4.

Full text
Abstract:
The process of melt dispersion on a rotating bowl is a common method for producing metal powders. It is difficult to study the dispersion process on real melts, including by visualisation methods. Therefore, it is proposed to study the influence of such factors as the jet fall height, liquid flow rate, surface wetting, and the presence of a bowl wall on the process of obtaining small droplets using a model liquid without crystallisation, recording the process by high-speed shooting. The purpose of this work is to determine the most favourable dispersion conditions, when all the supplied liquid
APA, Harvard, Vancouver, ISO, and other styles
33

Kireev, Ivan M., Mikhail V. Danilov, Zinaida M. Koval’, and Filipp A. Zimin. "Technological process of field crops spraying with slotted sprayers." Tractors and Agricultural Machinery 89, no. 6 (2023): 395–401. http://dx.doi.org/10.17816/0321-4443-115022.

Full text
Abstract:
BACKGROUND: The subject of the study is the technological process of spraying field crops with slotted sprayers and the indicators dispersion.
 AIMS: Improving the technological process of spraying plants with the use of pneumo-hydraulic slotted sprayers.
 METHODS: Special equipment was used for photographing films of the liquid being sprayed under various operating modes of slotted sprayers with the possibility of calculating the size of the droplets. Fulfillment of the requirements for the number of drops/cm2 at the treated object, overlapping the liquid spray jets ensures uniform
APA, Harvard, Vancouver, ISO, and other styles
34

Meznikova, M. V., I. B. Borisenko, O. G. Chamurliev, E. I. Ulybina, and O. N. Romenskaya. "Innovative method of strip-till 3-D spraying in chemical treatment of crops to implement resource-saving approaches in strip-till technology." IOP Conference Series: Earth and Environmental Science 839, no. 4 (2021): 042043. http://dx.doi.org/10.1088/1755-1315/839/4/042043.

Full text
Abstract:
Abstract A new approach to the technology of chemical treatment of crops based on the technological process of volumetric 3-D spraying, which differs favorably from the classical technology of continuous spraying, is developed. The development makes it possible to competently and efficiently apply working chemical solutions depending on the phase of growth and development of the cultivated plant on the object of treatment. When designing the technological process of volumetric 3-D spraying, the architectural features of the cultural plant were taken into account. The applied approach to the ap
APA, Harvard, Vancouver, ISO, and other styles
35

Gu, Chenchen, Xiu Wang, Xiaole Wang, Fuzeng Yang, and Changyuan Zhai. "Research Progress on Variable-Rate Spraying Technology in Orchards." Applied Engineering in Agriculture 36, no. 6 (2020): 927–42. http://dx.doi.org/10.13031/aea.14201.

Full text
Abstract:
HighlightsReview the research status of variable-rate spraying technology and point out the direction for the future researchDiscussed the advantages and disadvantages of different techniques to detect canopy volume and canopy biomassThe air speed and volume adjustment need to be controlled based on the canopy detection systemAbstract. Variable-rate pesticide application in orchards aims to solve the problems of low pesticide utilization rates and serious environmental pollution in traditional pesticide applications. In this article, we have reviewed the research status of the technology to po
APA, Harvard, Vancouver, ISO, and other styles
36

Cieniawska, Beata, Katarzyna Pentoś, and Tomasz Szulc. "Correlation and Regression Analysis of Spraying Process Quality Indicators." Applied Sciences 12, no. 23 (2022): 12034. http://dx.doi.org/10.3390/app122312034.

Full text
Abstract:
The study presents the results of the correlation and regression of the deposition of liquid and the degree of coverage of sprayed objects. Preliminary experiments were conducted in terms of droplet size depending on liquid pressure and nozzle type. Studies on the degree of coverage and deposition of spray liquid were then carried out. The test stand consisted of a carrier of nozzles and artificial plants. Samplers were attached to the artificial plants to obtain vertical and horizontal surfaces. Water-sensitive paper and filter papers were sampled (for measurements of the degree of coverage a
APA, Harvard, Vancouver, ISO, and other styles
37

Hadjixenophontos, Efi, Masoud Mahmoudizadeh, Michael Rubin, et al. "Palladium Membrane with High Density of Large-Angle Grain Boundaries to Promote Hydrogen Diffusivity." Membranes 12, no. 6 (2022): 617. http://dx.doi.org/10.3390/membranes12060617.

Full text
Abstract:
A higher density of large-angle grain boundaries in palladium membranes promotes hydrogen diffusion whereas small-angle grain boundaries suppress it. In this paper, the microstructure formation in 10 µm thick palladium membranes is tuned to achieve a submicronic grain size above 100 nm with a high density of large-angle grain boundaries. Moreover, changes in the grain boundaries’ structure is investigated after exposure to hydrogen at 300 and 500 °C. To attain large-angle grain boundaries in Pd, the coating was performed on yttria-stabilized zirconia/porous Crofer 22 APU substrates (intended f
APA, Harvard, Vancouver, ISO, and other styles
38

Sun, Zhongke, Zhongwei Chen, and Xiao Ma. "Computation on Infrared Radiation of Side Exhaust Plume under Spraying Water." Journal of Physics: Conference Series 2112, no. 1 (2021): 012002. http://dx.doi.org/10.1088/1742-6596/2112/1/012002.

Full text
Abstract:
Abstract The high temperature plume of ships has obvious infrared radiation feature. Spraying water-liquid droplets in side exhaust system can effectively reduce the high temperature of the tail gas to reduce the infrared radiation of the exhaust plume. In this paper, ANSYS Fluent is used to establish the concentration field and temperature field of the side exhaust plume atter spraying water-liquid droplets. And the statistic narrow band model (Malkmus model) and the C-G approximation method are used to calculate the infrared radiation intensity of the exhaust plume in the normal direction of
APA, Harvard, Vancouver, ISO, and other styles
39

Myalska, Hanna, Krzysztof Szymański, and Grzegorz Moskal. "Microstructure and Selected Properties of WC-Co-Cr Coatings Deposited by High Velocity Thermal Spray Processes." Solid State Phenomena 246 (February 2016): 117–22. http://dx.doi.org/10.4028/www.scientific.net/ssp.246.117.

Full text
Abstract:
Selected information about high velocity thermal spraying method were presented in this article. Three generations of thermal spraying processes based on oxygen with propane mixture, liquid fuel with oxygen and propane with air were characterized. A powder of WC-Co-Cr 86-10-4 was used for coatings deposition on a steel substrate. Four coatings were deposited by different thermal spraying systems such as Diamond Jet, JP 5000, Micro HVOF and HVAF.
APA, Harvard, Vancouver, ISO, and other styles
40

Zubaedah, Reza, Stanly Hence Dolfi Loppies, and Loudry Loudry. "Automation system spraying desinfectant at Universitas Musamus." E3S Web of Conferences 328 (2021): 04023. http://dx.doi.org/10.1051/e3sconf/202132804023.

Full text
Abstract:
During the pandemic the learning process was conducted online and partly done face-to-face so that every day there are still students and employees who are in the campus environment. One of the prevention of covid transmission is done by spraying disinfectant when passing through the front gate of the campus. A design a prototype of an automatic disinfectant spray system and build a system on the prototype that can provide real time information related to monitoring the contents of the disinfectant tank by designing hardware. The results of the research built a disinfectant spraying automation
APA, Harvard, Vancouver, ISO, and other styles
41

Sakiroh, Sakiroh, Kurnia Dewi Sasmita, Nur Kholis Firdaus, Dewi Nur Rokhmah, Dibyo Pranowo, and Saefudin Saefudin. "The effectiveness of liquid biofertilizer from waste bioconversion using black soldier fly larvae on the growth of arabica coffee seedlings." E3S Web of Conferences 373 (2023): 04022. http://dx.doi.org/10.1051/e3sconf/202337304022.

Full text
Abstract:
The organic waste treatment process using Black Soldier Larvae (BSF) produces liquid biofertilizer (LB) that contains functional microbes and macro and micronutrients that potentially can stimulate plant growth. The study aimed to determine the effectiveness of liquid biofertilizer from waste bioconversion by BSF on the growth of arabica coffee seedlings. The experiment used a randomized block design with 7 treatments, which consisted of: no treatment (control), 1.5% LB spraying, 3% LB spraying, 6% LB spraying, 3% LB watering, 6% LB watering, and 12% LB watering, with 4 replications and each r
APA, Harvard, Vancouver, ISO, and other styles
42

Berner, Bogusława, Jerzy Chojnacki, Jiří Dvořák, et al. "Spraying Wheat Plants with a Drone Moved at Low Altitudes." Agronomy 14, no. 9 (2024): 1894. http://dx.doi.org/10.3390/agronomy14091894.

Full text
Abstract:
On a mounted laboratory stand, comparative tests were carried out on the effectiveness of spraying wheat plants with liquid using a multi-rotor drone. The study was undertaken with and without propeller rotations. The lack of rotations simulated spraying by a ground sprayer. The height of the drone’s displacement above the plants was similar to that of the nozzles above the plants used when spraying with field sprayers, 0.5 m and 1.0 m. The speed of the drone movement was 0.57 and 1.0 m·s−1. The effects of the height and speed of the drone’s movement and the impact of the airflow on the volume
APA, Harvard, Vancouver, ISO, and other styles
43

Anufriev, I. S., E. Yu Shadrin, E. P. Kopy’ev, L. I. Maltsev, I. S. Sadkin, and O. V. Sharypov. "Spraying Liquid Using Pneumatic Nozzle for Suspension Fuel." Journal of Engineering Thermophysics 29, no. 4 (2020): 542–48. http://dx.doi.org/10.1134/s1810232820040025.

Full text
APA, Harvard, Vancouver, ISO, and other styles
44

Vaaraslahti, K., A. Laitinen, and J. Keskinen. "Charge acquired by scrubbing liquid droplets during spraying." Journal of Aerosol Science 31 (September 2000): 859–60. http://dx.doi.org/10.1016/s0021-8502(00)90869-3.

Full text
APA, Harvard, Vancouver, ISO, and other styles
45

Djurić, Z., and P. Grant. "An inverse problem in modelling liquid metal spraying." Applied Mathematical Modelling 27, no. 5 (2003): 379–96. http://dx.doi.org/10.1016/s0307-904x(03)00044-1.

Full text
APA, Harvard, Vancouver, ISO, and other styles
46

Tabbara, H., and S. Gu. "Computational simulation of liquid-fuelled HVOF thermal spraying." Surface and Coatings Technology 204, no. 5 (2009): 676–84. http://dx.doi.org/10.1016/j.surfcoat.2009.09.005.

Full text
APA, Harvard, Vancouver, ISO, and other styles
47

Aleksandrov, V. A. "Vibrational spraying of liquid by a thin rod." Technical Physics Letters 34, no. 2 (2008): 100–102. http://dx.doi.org/10.1134/s1063785008020041.

Full text
APA, Harvard, Vancouver, ISO, and other styles
48

Kluza, Paweł A., Izabela Kuna-Broniowska, and Stanisław Parafiniuk. "Modeling and Prediction of the Uniformity of Spray Liquid Coverage from Flat Fan Spray Nozzles." Sustainability 11, no. 23 (2019): 6716. http://dx.doi.org/10.3390/su11236716.

Full text
Abstract:
The effectiveness and quality of agricultural spraying largely depends on the technical efficiency of the nozzles installed in agricultural sprayers. The uniform spraying of plants results in a decrease in the amount of pesticides used in agricultural production and affects environmental safety. Both newly developed sprayers and those currently in use need quality control as well as an assessment of the performance of the spraying process, especially its uniformity. However, the models applied presently do not ensure accurate estimates or predictions of the spray liquid coverage uniformity of
APA, Harvard, Vancouver, ISO, and other styles
49

Mukhina, Mariia, Evgeny Kopyev, and Evgeniy Shadrin. "Combustion of liquid hydrocarbons sprayed by air jet." E3S Web of Conferences 459 (2023): 07006. http://dx.doi.org/10.1051/e3sconf/202345907006.

Full text
Abstract:
In the present work, the combustion of liquid hydrocarbons sprayed by air jet was studied using diesel fuel as an example. The dependences of nitrogen oxides and carbon monoxide concentrations in combustion products on the fuel and air flow rates were investigated using an atmospheric burner device. It is shown that while diesel fuel sprayed by air jet there is a wider range of operating parameters in comparison with steam spraying due to the flameout. Compared with atomization by air jet at room temperature, steam and heated air spraying have advantages, for these regimes the NOx concentratio
APA, Harvard, Vancouver, ISO, and other styles
50

Pachuta, Aleksandra, Bogusława Berner, Jerzy Chojnacki, et al. "Propellers Spin Rate Effect of a Spraying Drone on Quality of Liquid Deposition in a Crown of Young Spruce." Agriculture 13, no. 8 (2023): 1584. http://dx.doi.org/10.3390/agriculture13081584.

Full text
Abstract:
The study aimed to assess the quality of spraying of ornamental conifer using a multi-rotor drone. We examined how the speed of drone movement and the propellers’ spin speed can affect the deposition quality of the sprayed liquid in the crown of blue spruce (Picea pungens Engelm.). Due to the avoidance in the future of droplet drift by air movements, an air injector atomiser for liquid spraying was used, and a low altitude of 0.6 m of the drone flying above the tree was used in the study. The drone moved at two speeds: 0.57 m·s–1 and 0.94 m·s–1. The propellers’ spin speeds were adjusted based
APA, Harvard, Vancouver, ISO, and other styles
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!