Academic literature on the topic 'Superstrate processing'

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Superstrate processing.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Superstrate processing"

1

Cheshme Khavar, A. H., A. R. Mahjoub, and N. Taghavinia. "Low-temperature solution-based processing to 7.24% efficient superstrate CuInS2 solar cells." Solar Energy 157 (November 2017): 581–86. http://dx.doi.org/10.1016/j.solener.2017.08.053.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Shaji B. K., Arun, Anju Pradeep, and P. Mohanan. "Fractal Inspired Metamaterial Superstrate for Gain Enhancement." International Journal on Communications Antenna and Propagation (IRECAP) 11, no. 4 (2021): 271. http://dx.doi.org/10.15866/irecap.v11i4.20861.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

McCandless, Brian E. "CdTe Solar Cells: Processing Limits and Defect Chemistry Effects on Open Circuit Voltage." MRS Proceedings 1538 (2013): 249–60. http://dx.doi.org/10.1557/opl.2013.1017.

Full text
Abstract:
ABSTRACTThe role of CdTe solar cell processing on the defect chemistry that limits open circuit voltage (VOC) is addressed in the thermochemical processing regimes commonly encountered in present-generation CdTe devices. The highest VOC is 0.91 V for a bulk CdTe crystal with ITO which is only marginally higher than VOC = 0.86 V obtained for polycrystalline CdTe films with CdS. Both fall ∼0.4 V short of the VOC expected for CdTe, having band gap EG = 1.5 eV. The present >16% efficient superstrate CdTe cell uses a process based on high-temperature, T > 500°C, CdTe growth on CdS, coupled wi
APA, Harvard, Vancouver, ISO, and other styles
4

Bergmann, R. B., T. J. Rinke, R. M. Hausner, M. Grauvogl, M. Vetter, and J. H. Werner. "Thin film solar cells on glass by transfer of monocrystalline Si films." International Journal of Photoenergy 1, no. 2 (1999): 89–93. http://dx.doi.org/10.1155/s1110662x99000173.

Full text
Abstract:
Thin film solar cells based on monocrystalline Si films are transferred to a glass superstrate. Chemical vapor deposition serves to epitaxially deposit Si on quasi-monocrystalline Si films obtained from thermal crystallization of a double layer porous Si film on a Si wafer. A separation layer that forms during this crystallization process allows one to separate the epitaxial layer on top of the quasi-monocrystalline film from the starting Si wafer. We presently achieve an independently confirmed solar cell conversion efficiency of 9:26%. Ray tracing studies in combination with electrical devic
APA, Harvard, Vancouver, ISO, and other styles
5

Tchafa, F. Mbanya, and H. Huang. "Microstrip patch antenna for simultaneous temperature sensing and superstrate characterization." Smart Materials and Structures 28, no. 10 (2019): 105009. http://dx.doi.org/10.1088/1361-665x/ab2213.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Bearda, Twan, Ivan Gordon, Hariharsudan Sivaramakrishnan Radhakrishnan, et al. "Thin Epitaxial Silicon Foils Using Porous-Silicon-Based Lift-Off for Photovoltaic Application." MRS Advances 1, no. 48 (2016): 3235–46. http://dx.doi.org/10.1557/adv.2016.314.

Full text
Abstract:
ABSTRACTIn order to reduce the material cost for silicon solar cells, several research groups are investigating methods to minimize the silicon consumption for making monocrystalline silicon wafers. One promising approach is deposition of an epitaxial layer on porous silicon, followed by detachment of the layer. This contribution discusses improvements in the epitaxial wafer fabrication by optimization of the porosification process. The introduction of a layered porous silicon structure allows to independently improve both epitaxial layer quality and detachment yield. In this way, we have mana
APA, Harvard, Vancouver, ISO, and other styles
7

Jassim, ِAli Khalid, Malik Jasim Farhan, and Fadia Noori Hummadi Al-Nuaimy. "Enhancement of gain using a multilayer superstrate metasurface cell array with a microstrip patch antenna." Indonesian Journal of Electrical Engineering and Computer Science 24, no. 3 (2021): 1564. http://dx.doi.org/10.11591/ijeecs.v24.i3.pp1564-1570.

Full text
Abstract:
This research presents a new idea in the use of wireless communication antennas: it uses a multi-layered array of cells called a superstrate multi-layer metasurface (MTM) and is placed in front of a patch of microstrip antenna to absorb surface waves and prevent them from passing through the insulating material, which reduces the permeability of the insulator and thus improves the Antenna properties, The proposed hexagonal cell with resonators is placed on the flame resistant (FR4) substrate, with a relative permittivity of 4.3 and an area (14×14) mm2 . It was tested when the metasurface layer
APA, Harvard, Vancouver, ISO, and other styles
8

Ajewole, Bukola D., Pradeep Kumar, and Thomas J. O. Afullo. "A MIMO Antenna Using I-Shaped Metamaterial Superstrate with Improved Gain and Isolation for Multiband Wireless Systems." International Journal on Communications Antenna and Propagation (IRECAP) 13, no. 4 (2023): 206. http://dx.doi.org/10.15866/irecap.v13i4.23184.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Bansal, Shubhra, and Michelle Chiu. "Atmospherically Processed and Stable Cs-Pb Based Perovskite Solar Cells." MRS Advances 2, no. 53 (2017): 3083–90. http://dx.doi.org/10.1557/adv.2017.449.

Full text
Abstract:
ABSTRACTIn this work, a planar heterojunction superstrate n-i-p device based on Zn(O,S) electron transport layer and CsPbI2Br absorber material at 1.93 eV bandgap is presented. The CsPbI2Br films are deposited using a 2-step atmospheric solution deposition process and characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), UV-vis spectroscopy and photoluminescence (PL). Best device with an efficiency of 12.34 % and 11.94% in reverse and forward scans respectively and stabilized power output of 12.14 mW/cm2 has been demonstrated via atmospheric solution processing with min
APA, Harvard, Vancouver, ISO, and other styles
10

Das, Debajyoti, and Chandralina Patra. "Wide optical gap B-doped nc-Si thin films with advanced crystallinity and conductivity on transparent flexible substrates for potential low-cost flexible electronics including nc-Si superstrate p–i–n solar cells." Materials Advances 2, no. 6 (2021): 2055–67. http://dx.doi.org/10.1039/d0ma00915f.

Full text
Abstract:
The current boost in flexible energy harvesting devices demands the fabrication of solar cells on non-rigid, light-weight and cheap substrates to make roll-to-roll processing technology economically viable.
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Superstrate processing"

1

Ramalingam, Madhan Raj. "Cadmium zinc telluride solar cells by close spaced sublimation." [Tampa, Fla.] : University of South Florida, 2004. http://purl.fcla.edu/fcla/etd/SFE0000408.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Terry, Mason L. Photovoltaic &amp Renewable Energy Engineering UNSW. "Post???deposition processing of polycrystalline silicon thin???film solar cells on low???temperature glass superstrates." Awarded by:University of New South Wales. Photovoltaic and Renewable Energy Engineering, 2007. http://handle.unsw.edu.au/1959.4/30498.

Full text
Abstract:
In polycrystalline silicon (pc-Si) thin-film solar cells, defect passivation is critical to device performance. Isoelectronic or covalently bonded impurities, hydrogenic, extended defects and defects with localized levels in the bandgap (deep level defects) are typically introduced during the fabrication of, and/or are inherent to, pc-Si thin-film solar cells. These defects dramatically affect minority carrier lifetimes. Removing and/or passivating these defects is required to maximize minority carrier lifetimes and is typically done through thermal annealing and passivation techniques. For pc
APA, Harvard, Vancouver, ISO, and other styles
3

Lee, Chien-Hsun, and 李建勳. "Processing and characterization of superstrate-configured CIGS extremely thin absorber layers." Thesis, 2012. http://ndltd.ncl.edu.tw/handle/93906946294656486179.

Full text
Abstract:
碩士<br>逢甲大學<br>材料科學所<br>100<br>In this research paper, sputtering of three constituent differences Cux(In1-yGay) tertiary target respectively, under various working pressures and substrate temperatures was perform to grow thin-film precursors for superstrate-type CIGS solar cells, preparation of the selenium layer using atmospheric pressure plasma technology, followed by selenium treatment of 「Precursor/Se layer」 using rapid thermal treatment, preparation CIGS absorber layer applicable to solar cells. The whole Experimental procedure Sequence Can Divided into(1)preparation CIG Precursor、(2)grow
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Superstrate processing"

1

Arora, Chirag, Shyam S. Pattnaik, and R. N. Baral. "Metamaterial superstrate for performance enhancement of microstrip patch antenna array." In 2016 3rd International Conference on Signal Processing and Integrated Networks (SPIN). IEEE, 2016. http://dx.doi.org/10.1109/spin.2016.7566804.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Paleti, Saritha, and Anirban Bhattacharjee. "Design of PIFA antenna with metamaterial superstrate at 2.4 Ghz using HFSS." In 2017 International Conference on Communication and Signal Processing (ICCSP). IEEE, 2017. http://dx.doi.org/10.1109/iccsp.2017.8286686.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Nath, Swarnali, Kumaresh Sarmah, Sivaranjan Goswami, and Kandarpa Kumar Sarma. "Design of a Dual Band Antenna Using Square Closed Ring (SCR) Superstrate." In 2019 2nd International Conference on Innovations in Electronics, Signal Processing and Communication (IESC). IEEE, 2019. http://dx.doi.org/10.1109/iespc.2019.8902379.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

M., Sabari Prasad, and Jayakumar M. "Design and Performance Evaluation of Superstrate Microstrip Array Antenna for V2I-DSRC Applications." In 2021 Sixth International Conference on Wireless Communications, Signal Processing and Networking (WiSPNET). IEEE, 2021. http://dx.doi.org/10.1109/wispnet51692.2021.9419465.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Yerlikaya, Mehmet, and Seyfettin Sinan Gultekin. "Dual-Fed Wideband MIMO Antenna System Design for 5G Applications with Increased Gain with Superstrate." In 2021 29th Signal Processing and Communications Applications Conference (SIU). IEEE, 2021. http://dx.doi.org/10.1109/siu53274.2021.9477829.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Sahu, Bhagirath, Mayank Aggarwal, Pankaj Tripathi, and Rajesh Singh. "Stacked cylindrical dielectric resonator antenna with metamaterial as a superstrate for enhancing the bandwidth and gain." In 2013 IEEE International Conference on Signal Processing, Computing and Control (ISPCC). IEEE, 2013. http://dx.doi.org/10.1109/ispcc.2013.6663408.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Ge, Yuehe, and Karu P. Esselle. "Analysis and design of low-profile high-gain resonant cavity antennas with single-layer superstrates." In 2008 2nd International Conference on Signal Processing and Communication Systems (ICSPCS 2008). IEEE, 2008. http://dx.doi.org/10.1109/icspcs.2008.4813683.

Full text
APA, Harvard, Vancouver, ISO, and other styles
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!