Relevant bibliographies by topics / Thermocompressors

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Conference papers
  4. Reports

Academic literature on the topic 'Thermocompressors'

Author: Grafiati
Published: 28 May 2022
Last updated: 31 July 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Thermocompressors.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Thermocompressors"

1

Fischer, Fabian, and Hans-Detlev Kühl. "Generation of compressed air by cascaded thermocompressors – project status." E3S Web of Conferences 313 (2021): 04003. http://dx.doi.org/10.1051/e3sconf/202131304003.

Full text
Abstract:
Compressed air is one of the most widely used industrial energy sources, and its production by mechanical compressors is extremely expensive and, in addition, inefficient. Therefore, the utilization of waste heat, which accrues on a large scale in many industrial applications, by means of a thermocompressor is an obvious alternative. This contribution presents a design approach to experimentally investigate a reciprocating thermocompressor with a self-actuated overdriven free displacer. These experiments shall be the basis for the design and realization of a cascade of identical stages, which
APA, Harvard, Vancouver, ISO, and other styles
2

Fischer, Fabian, and Hans-Detlev Kühl. "Generation of compressed air by cascaded thermocompressors – project status." E3S Web of Conferences 313 (2021) (October 22, 2021): 04003. https://doi.org/10.1051/e3sconf/202131304003.

Full text
Abstract:
Compressed air is one of the most widely used industrial energy sources, and its production by mechanical compressors is extremely expensive and, in addition, inefficient. Therefore, the utilization of waste heat, which accrues on a large scale in many industrial applications, by means of a thermocompressor is an obvious alternative. This contribution presents a design approach to experimentally investigate a reciprocating thermocompressor with a self-actuated overdriven free displacer. These experiments shall be the basis for the design and realization of a cascade of identical stages, which
APA, Harvard, Vancouver, ISO, and other styles
3

Lin, Wen-Ye, Xiao-Hua Wu, Jun-Ling Yang, and Lu-Wei Yang. "Experimental study and numerical analysis of thermocompressors with annular regenerators." International Journal of Refrigeration 36, no. 4 (2013): 1376–87. http://dx.doi.org/10.1016/j.ijrefrig.2013.02.006.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Akulich, P. V. "On the Efficiency of using Thermocompressors in the Processes of Drying and Heat Treatment of Materials and a Method for Calculating them." Journal of Engineering Physics and Thermophysics 86, no. 6 (2013): 1273–79. http://dx.doi.org/10.1007/s10891-013-0950-8.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Ortega-Delgado, Bartolomé, Matteo Cornali, Patricia Palenzuela, and Diego C. Alarcón-Padilla. "Operational analysis of the coupling between a multi-effect distillation unit with thermal vapor compression and a Rankine cycle power block using variable nozzle thermocompressors." Applied Energy 204 (October 2017): 690–701. http://dx.doi.org/10.1016/j.apenergy.2017.07.062.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Stanković, Branko. "Modified Steam-Turbine Rankine Cycle without Rejection of the Cycle Condensation Heat, Driven by a Wet-Vapor-Region Thermocompressor." Energija, ekonomija, ekologija XXVI, no. 2 (2024): 71–78. http://dx.doi.org/10.46793/eee24-2.71s.

Full text
Abstract:
The disclosed concept relates to a novel modified and simplified steam-turbine Rankine cycle without rejection of the cycle waste heat of condensation, which is driven by a thermocompressor (ejector) operating in the wet-vapor region. The thus modified steam-turbine Rankine cycle can theoretically achieve the maximum possible thermal efficiency (~100%). The wet-vapor mixture circulating within the thermocompressor is being separated in a dedicated cylindrical separation tank, so that the saturated water is pumped to a water heater where it receives the cycle heat input, while the saturated vap
APA, Harvard, Vancouver, ISO, and other styles
7

Kozhemyakin, V. V., and N. A. Morozov. "Application of a thermocompressor in a nuclear power plant with a liquid metal coolant." Transactions of the Krylov State Research Centre S-I, no. 1 (2021): 171–72. http://dx.doi.org/10.24937/2542-2324-2021-1-s-i-171-172.

Full text
Abstract:
The paper considers the possibility of using a thermocompressor at a nuclear power plant with a liquid metal coolant. The work is devoted to how, by increasing the output pulse, to achieve an increase in pressure.
APA, Harvard, Vancouver, ISO, and other styles
8

Wu, Xiao Hua, Lu Wei Yang, Jun Ling Yang, and Wen Ye Lin. "Experimental Study of Linear Motor Direct-Driven Thermocompressor." Advanced Materials Research 732-733 (August 2013): 1147–52. http://dx.doi.org/10.4028/www.scientific.net/amr.732-733.1147.

Full text
Abstract:
A prototype thermocompressor driven by linear motor was setup and experimental tudied. Peak-peak pressure in the system was influenced by the regenerator, the heating temperature and the gap clearance between piston and cylinder. The optimal frequency of the system was determined by spring constant and total mass of piston, shaft and moving iron. The peak-peak pressure was found to change little with filling pressure when the heating temperature was lower than 250°C, employing with N2 or He4 as the working substance. But when the heating temperature was higher than 250°C, peak-peak pressure in
APA, Harvard, Vancouver, ISO, and other styles
9

Edwards, M. J., and R. B. Peterson. "Reciprocating thermocompressor performance with non-ideal component characteristics." Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy 221, no. 4 (2007): 459–71. http://dx.doi.org/10.1243/09576509jpe412.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Blagin, Evgeny, Alexandr Dovgyallo, and Dmitry Uglanov. "Study of Different Factors Influence on Thermocompressor Performance." MATEC Web of Conferences 108 (2017): 04001. http://dx.doi.org/10.1051/matecconf/201710804001.

Full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Thermocompressors"

1

Арсеньєв, В`ячеслав Михайлович, Вячеслав Михайлович Арсеньев, Viacheslav Mykhailovych Arseniev, Олег Юрійович Чех, Олег Юрьевич Чех та Oleh Yuriiovych Chekh. "Адіабатні скипаючі потоки у соплах: вплив тиску на релаксаційне пароутворення". Thesis, Сумський державний університет, 2017. http://essuir.sumdu.edu.ua/handle/123456789/62586.

Full text
Abstract:
Потоки рідин, які самовипаровуються цікаві передусім через використання їх у якості енергоефективних робочих тіл у струменевих нагнітачах різного призначення, включаючи струменеві термонасоси (пароводяні інжектори) та термокомпрессори. Випаровування може починатися в перерізі, де місцевий тиск в потоці дорівнює тиску насичення при початковій температурі рідини t0. Це залежить від початкового недогріву рідини до стану насичення, швидкості рідини, геометрії розглянутого каналу і виду рідини.
APA, Harvard, Vancouver, ISO, and other styles
2

Прокопов, Максим Геннадійович, Максим Геннадьевич Прокопов, Maksym Hennadiiovych Prokopov, Валерій Миколайович Марченко, Валерий Николаевич Марченко та Valerii Mykolaiovych Marchenko. "Парообразование в адиабатных ускоряющихся потоках вскипающей жидкости". Thesis, Издательство СумГУ, 2007. http://essuir.sumdu.edu.ua/handle/123456789/19321.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Прокопов, Максим Геннадійович, Максим Геннадьевич Прокопов, Maksym Hennadiiovych Prokopov, Валерій Миколайович Марченко, Валерий Николаевич Марченко та Valerii Mykolaiovych Marchenko. "Метод расчета показателей истечения вскипающей жидкости". Thesis, Издательство СумГУ, 2008. http://essuir.sumdu.edu.ua/handle/123456789/5734.

Full text
Abstract:
Эффективность жидкостно-парового струйного термокомпрессора (СТК) в первую очередь определяется совершенством процессов истечения вскипающей жидкости и формирования рабочей струи влажного пара за выходным срезом активного сопла. В литературе приводится большое количество экспериментальных и теоретических исследований, посвященных изучению течения вскипающих потоков в расширяющихся каналах, но все они носят лишь описательный характер. Актуальным является создание метода расчета истечения вскипающей жидкости. При цитировании документа, используйте ссылку http://essuir.sumdu.edu.ua/handle/1234567
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Thermocompressors"

1

Thomas, Seth, and Eric J. Barth. "Stirling Thermocompressor: Lumped Parameter Modeling and Experimental Impact of Displacer Motion Profile on Work Output." In ASME/BATH 2019 Symposium on Fluid Power and Motion Control. American Society of Mechanical Engineers, 2019. http://dx.doi.org/10.1115/fpmc2019-1683.

Full text
Abstract:
Abstract The thermocompressor, a little-known class of Stirling devices that efficiently compresses gas, presents new challenges for modeling and experimental validation. In modeling, traditional analytic assumptions about displacer motion are limiting. In experimental verification, few devices have actually been built and tested. In this paper, the authors test the feasibility of a lumped-parameter approach for predicting the performance of Stirling thermocompressors subject to different displacer motion profiles. Since the displacer of a thermocompressor can be controlled independently, unli
APA, Harvard, Vancouver, ISO, and other styles
2

Kumar, Nithin S., Mark E. Hofacker, and Eric J. Barth. "Design of a Stirling Thermocompressor for a Pneumatically Actuated Ankle-Foot Orthosis." In ASME 2013 Dynamic Systems and Control Conference. American Society of Mechanical Engineers, 2013. http://dx.doi.org/10.1115/dscc2013-3995.

Full text
Abstract:
This paper presents the design, modeling, and simulated performance of a prototype Stirling thermocompressor. The thermocompressor is intended to be mounted on the back of a user’s lower leg and convert a hydrocarbon fuel source into 50 W of pneumatic power at 650 kPa to power an ankle foot orthosis. Consisting only of a displacer piston, the Stirling thermocompressor’s displacer piston motion is directly controlled by a brushless DC motor so that the frequency of operation can be tuned to output the maximum power. Simulation indicates that this operating frequency is influenced by the intende
APA, Harvard, Vancouver, ISO, and other styles
3

Arques, P. "Piston movement in thermocompressor." In IECEC-97 Proceedings of the Thirty-Second Intersociety Energy Conversion Engineering Conference (Cat. No.97CH6203). IEEE, 1997. http://dx.doi.org/10.1109/iecec.1997.661906.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Blagin, Evgeny, Sergey Korneev, Alexey Lopatin, and Dmitry Sarmin. "Experimental Investigation of Thermocompressor." In 2021 International Scientific and Technical Engine Conference (EC). IEEE, 2021. http://dx.doi.org/10.1109/ec52789.2021.10016836.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Hofacker, Mark E., Nithin S. Kumar, and Eric J. Barth. "Dynamic Simulation and Experimental Validation of a Single Stage Thermocompressor for a Pneumatic Ankle-Foot Orthosis." In ASME/BATH 2013 Symposium on Fluid Power and Motion Control. American Society of Mechanical Engineers, 2013. http://dx.doi.org/10.1115/fpmc2013-4483.

Full text
Abstract:
The mechanical design, modeling, and partial experimental validation of a prototype Stirling thermocompressor is presented in this paper. The thermocompressor is intended to serve as a compact and quiet, untethered 50 W, pneumatic power supply for an ankle foot orthosis. The goal of high efficiency at the target power density is pursued through the use of novel heat exchangers and high operating temperature and frequency. The motion of the displacer piston is controlled utilizing a brushless DC motor driving a continuous linear reciprocating screw. This paper presents the experimental validati
APA, Harvard, Vancouver, ISO, and other styles
6

Thomas, Seth, and Eric J. Barth. "Multi-Stage Modeling of a Stirling Thermocompressor." In ASME/BATH 2017 Symposium on Fluid Power and Motion Control. American Society of Mechanical Engineers, 2017. http://dx.doi.org/10.1115/fpmc2017-4320.

Full text
Abstract:
Stirling engines are silent, high-efficiency power sources that generate work by shuttling a working fluid between hot and cold volumes while exploiting the working fluid’s change in pressure. Stirling engines are able to use multiple sources of heat to create this needed temperature difference, making them ideally suited for diverse waste heat recovery applications. A novel application of this technology would be to reuse waste heat from one industrial process to generate compressed air to power a second, pneumatic process, thus increasing a manufacturing facility’s overall energy efficiency.
APA, Harvard, Vancouver, ISO, and other styles
7

Yarger, David, Matthew Beck, and Richard Peterson. "Experimental Study of a Mesoscale Two-Phase Thermocompressor." In 4th International Energy Conversion Engineering Conference and Exhibit (IECEC). American Institute of Aeronautics and Astronautics, 2006. http://dx.doi.org/10.2514/6.2006-4014.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Blagin, E., I. Uskov, E. Kuznetsova, and A. Dovgyallo. "Development of Thermocompressor Mathematical Model Considering Hydraulic Losses in Regenerator." In 2020 International Multi-Conference on Industrial Engineering and Modern Technologies (FarEastCon). IEEE, 2020. http://dx.doi.org/10.1109/fareastcon50210.2020.9271643.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Edwards, Michael, and Richard Peterson. "Modeling and Thermodynamic Cycle Performance of a Miniature Reciprocating Thermocompressor." In 3rd International Energy Conversion Engineering Conference. American Institute of Aeronautics and Astronautics, 2005. http://dx.doi.org/10.2514/6.2005-5579.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Majeed, Hamed Abdul, and Ting Wang. "Investigation of Flashing Flow in a Siphon to Extract Condensate in Paper Dryer Application." In ASME 2019 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2019. http://dx.doi.org/10.1115/imece2019-10318.

Full text
Abstract:
Abstract The paper industry uses steam to dry paper web through cylinder dryers. As steam condenses inside the cylinder dryer, the condensate is removed by means of either a stationary or a rotary siphon. However, during the siphoning process for transporting the condensate, flashing of the condensate occurs, which could cause backflow or discontinuity in the siphoning process. To resolve this flashing issue, two approaches have been employed: (a) increasing the amount of steam supplied to the cylinder to “blow-through” the stalled condensate-steam mixture and (b) reducing the back pressure by
APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Thermocompressors"

1

Use Steam Jet Ejectors or Thermocompressors to Reduce Venting of Low-Pressure Steam. Office of Scientific and Technical Information (OSTI), 2005. http://dx.doi.org/10.2172/15020339.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Use Steam Jet Ejectors or Thermocompressors to Reduce Venting of Low-Pressure Steam. Office of Scientific and Technical Information (OSTI), 2006. http://dx.doi.org/10.2172/875769.

Full text
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Thermocompressors' for particular source types:
Journal articles
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography