Log in

Relevant bibliographies by topics / Tolerances mechanism

Contents

Journal articles
Dissertations / Theses
Books
Book chapters
Conference papers
Reports

Academic literature on the topic 'Tolerances mechanism'

Author: Grafiati

Published: 3 June 2025

Last updated: 31 July 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Tolerances mechanism.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Tolerances mechanism"

1

Caro, Ste´phane, Fouad Bennis, and Philippe Wenger. "Tolerance Synthesis of Mechanisms: A Robust Design Approach." Journal of Mechanical Design 127, no. 1 (2005): 86–94. http://dx.doi.org/10.1115/1.1825047.

Full text

Abstract:

This paper provides a new robust design method to dimension a mechanism and to synthesize its dimensional tolerances. The general issue is to find a robust mechanism for a given task, and to compute its optimal dimensional tolerances. For that purpose, the developed approach follows two consecutive steps, which are independent and complementary. First, the dimensions of the mechanism are computed by means of an appropriate robustness index, which is used to minimize the sensitivity of its performances to variations. These robust dimensions are obtained independently of the amount of variations

APA, Harvard, Vancouver, ISO, and other styles

2

Li, Xin You, and Wu Yi Chen. "Accuracy Synthesis of Redundant Parallel Kinematic Mechanism with Weighted Least Square Method." Key Engineering Materials 499 (January 2012): 3–8. http://dx.doi.org/10.4028/www.scientific.net/kem.499.3.

Full text

Abstract:

In order to reduce manufacturing cost, a methodology of accuracy synthesis for machine tool was recommended by combining both machining cost and Least Square method. Weighted coefficients representing the machining difficulty of manufacturing processes were introduced. 3PRS/UPS redundant parallel kinematic mechanism (3PRS/UPS PKM) was taken as an example, and its component tolerances were derived by the proposed method. Comparing with conventional method, the component tolerances were allocated reasonably. A further tolerance allocation for spherical and rotational joints was studied in detail

APA, Harvard, Vancouver, ISO, and other styles

3

Chen, Fu-Chen, Yih-Fong Tzeng, Meng-Hui Hsu, and Wei-Ren Chen. "COMBINING TAGUCHI METHOD, PRINCIPAL COMPONENT ANALYSIS AND FUZZY LOGIC TO THE TOLERANCE DESIGN OF A DUAL-PURPOSE SIX-BAR MECHANISM." Transactions of the Canadian Society for Mechanical Engineering 34, no. 2 (2010): 277–93. http://dx.doi.org/10.1139/tcsme-2010-0017.

Full text

Abstract:

A hybrid approach of combining Taguchi method, principal component analysis and fuzzy logic for the tolerance design of a dual-purpose six-bar mechanism is proposed. The approach is to firstly use the Taguchi orthogonal array to carry out experiments for calculating the S/N ratios of the positional errors to the angular error of the dual-purpose six-bar mechanism. The principal component analysis is then applied to determine the principal components of the S/N ratios, which are transformed via fuzzy logic reasoning into a multiple performance index (MPI) for further analysis of the effect of e

APA, Harvard, Vancouver, ISO, and other styles

4

Zhang, Li, Hong Nie, and Xiaohui Wei. "Kinematic Accuracy Method of Mechanisms Based on Tolerance Theories." Mathematical Problems in Engineering 2020 (October 14, 2020): 1–18. http://dx.doi.org/10.1155/2020/5023092.

Full text

Abstract:

Traditional tolerance analysis is mostly restricted to static analysis. However, tolerances of different components also affect the movement accuracy in a mechanism. In this paper, the idea of kinematic tolerance analysis is advanced. In the interest of achieving movement precision considering tolerance, a kinematic Jacobian model is established on the basis of a traditional dimensional chain and an original Jacobian model. The tolerances of functional element (FE) pairs are expressed as small-displacement screws. In addition, joint clearances resulting from tolerance design also influence the

APA, Harvard, Vancouver, ISO, and other styles

5

Cleghorn, W. L., R. G. Fenton, and Jing-fan Fu. "Optimum Tolerancing of Planar Mechanisms Based on an Error Sensitivity Analysis." Journal of Mechanical Design 115, no. 2 (1993): 306–13. http://dx.doi.org/10.1115/1.2919193.

Full text

Abstract:

This paper presents an analytical procedure to determine the optimum set of tolerance bands of the dimensions of a planar mechanism. Optimum tolerance bands are those which allow the largest values of dimensional tolerances, while ensuring that the desired output motion is kept within acceptable deviations form the output that would be generated by an ideal mechanism having no errors in dimensions. The analysis technique presented permits identification of the most sensitive link dimension, the most sensitive combination of input errors, and the most sensitive period within the entire cycle, w

APA, Harvard, Vancouver, ISO, and other styles

6

Li, Chun Li, Jian Xin Yang, and Rui Li. "Functional Tolerance Analysis of a Complex Mechanism Based on Analysis Line Method." Applied Mechanics and Materials 373-375 (August 2013): 2078–81. http://dx.doi.org/10.4028/www.scientific.net/amm.373-375.2078.

Full text

Abstract:

Tolerance analysis plays an important role at the stage of product design and has great influences on the assembly quality and manufacturing costs. For each ending point on the functional feature, the displacement transfer relationship is influenced by the clearance between the two parts and the tolerances of each part. With regard to functional tolerance accumulation for the simple assembly, the tolerance analysis of a complex mechanism with three parts is conducted based on the analysis line method. The rules for the functional tolerance analysis process will be summarized in this paper.

APA, Harvard, Vancouver, ISO, and other styles

7

Wu, Weidong, and S. S. Rao. "Interval Approach for the Modeling of Tolerances and Clearances in Mechanism Analysis." Journal of Mechanical Design 126, no. 4 (2004): 581–92. http://dx.doi.org/10.1115/1.1760775.

Full text

Abstract:

It is important to conduct error analysis of assemblies in order to ensure that the manufactured parts satisfy the design specifications. Traditionally, mechanical tolerances and clearances are modeled as random variables and the analysis is conducted using probabilistic methods. In this work, a new approach, based on interval analysis, is presented for the modeling and analysis of tolerances and clearances. The basic procedure of interval analysis involving solution of simultaneous nonlinear equations is described. The application of the approach in the fuzzy error analysis of planar and spat

APA, Harvard, Vancouver, ISO, and other styles

8

Ai, Yan Ting, Jing Tian, Feng Ling Zhang, Xue Zhai, and Shu Sheng Bai. "Study on Technique of Tolerance Optimal Allocation Based on Adaptive Genetic Algorithm." Advanced Materials Research 490-495 (March 2012): 1436–40. http://dx.doi.org/10.4028/www.scientific.net/amr.490-495.1436.

Full text

Abstract:

The rational allocation of tolerances is the key to reduce production costs and guarantee the performance. In this paper, in the premise of ensuring the performance, manufacturing cost minimization of assembly parts is set as objective function, and an adaptive genetic algorithm is proposed to optimize the design of tolerance allocation. The adaptive mechanism is introduced mainly for crossover operator and mutation operator to overcome the traditional adaptive genetic algorithm’s easy "premature" shortcomings according to individual fitness of population. And a penalty function is used to han

APA, Harvard, Vancouver, ISO, and other styles

9

Bazuev, Mikhail, Vitaly Koksharov, and Alexey Naichuk. "RESEARCH OF THE INFLUENCE OF THE DISPERSION OF THE ACTUAL LINK SIZES ON THE TRANSMISSION FUNCTION OF THE MECHANISM OF ROD SEMI-AUTOMATICS." Perm National Research Polytechnic University Aerospace Engineering Bulletin, no. 64 (2021): 67–73. http://dx.doi.org/10.15593/2224-9982/2021.64.07.

Full text

Abstract:

In this work, the analysis of real deviations from the nominal dimensions links, and their cumulative effect on the final movement of the chain linkage element rolling semiautomatic mechanism. The considered mechanism was converted to an equivalent one, consisting of lower translational and rotational kinematic pairs. In the course of the structural analysis, the mechanism was divided into Assur groups in order to simplify further kinematic calculations. The calculation was carried out sequentially for each of the structural groups separately. Based on this, a mathematical model of the kinemat

APA, Harvard, Vancouver, ISO, and other styles

10

Fu, Jing-fan, R. G. Fenton, and W. L. Cleghorn. "Synthesis of the Dimensional Tolerances of a Four-bar Mechanism." Transactions of the Canadian Society for Mechanical Engineering 12, no. 1 (1988): 9–14. http://dx.doi.org/10.1139/tcsme-1988-0002.

Full text

Abstract:

This paper presents a procedure to determine allowable tolerances in the dimensions of a planar four-bar mechanism which ensure that the output motions are kept within required error bands from the untoleranced motions. Starting from a preliminary set of estimates of the errors allowed, an optimization search is employed to determine the set of link dimension tolerances required to satisfy the output motion requirements. By incorporating a set of weighting factors associated with the link dimensions, the optimization is reduced to involving one independent variable. Examples applied to functio

APA, Harvard, Vancouver, ISO, and other styles

More sources

Dissertations / Theses on the topic "Tolerances mechanism"

1

Honey, Karen J. "Mechanisms of transplantation tolerance." Thesis, University of Oxford, 1999. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.301519.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Wise, Matt. "Mechanisms of transplantation tolerance." Thesis, University of Oxford, 1998. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.242039.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Hawker, Victoria. "Mechanisms underlying ozone tolerance." Thesis, University of Newcastle Upon Tyne, 2005. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.413001.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Scully, Ralph. "Mechanisms in transplantation tolerance." Thesis, University of Cambridge, 1994. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.321084.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

GracÌ§a, LuiÌs. "Mechanisms of peripheral transplantation tolerance." Thesis, University of Oxford, 2002. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.249470.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Arroyave, Quiceno Catalina. "Aluminium Tolerance Mechanisms in Brachiaria sp." Doctoral thesis, Universitat Autònoma de Barcelona, 2012. http://hdl.handle.net/10803/96359.

Full text

Abstract:

La tesis se ha centrado en el estudio las diferentes respuestas a la toxicidad por aluminio en tres especies del genero Brachiaria (gramíneas forrajeras de importancia económica) con el fin de contribuir a una mejor comprensión de los mecanismos de resistencia del Al. La investigación se dividió en 5 capítulos. En el primer capítulo se evaluó la respuesta de tres especies del genero Brachiaria a la toxicidad del aluminio. Brachiaria decumbens, B. brizantha y B. ruziziensis fueron crecidas en solución nutritiva completa de baja fuerza iónica y pH ácidos. Se realizaron ensayos para las respuest

APA, Harvard, Vancouver, ISO, and other styles

7

Heath, Victoria Lowdon. "Multifactorial mechanisms of immunological self tolerance." Thesis, University of Oxford, 1997. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.389012.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

Divekar, Rohit Dilip Zaghouani Habib. "Two aspects of peripheral immune tolerance systemic and mucosal tolerance mechanisms /." Diss., Columbia, Mo. : University of Missouri-Columbia, 2008. http://hdl.handle.net/10355/6868.

Full text

Abstract:

The entire dissertation/thesis text is included in the research.pdf file; the official abstract appears in the short.pdf file (which also appears in the research.pdf); a non-technical general description, or public abstract, appears in the public.pdf file. Title from PDF of title page (University of Missouri--Columbia, viewed on April 1, 2010). Vita. Thesis advisor: Habib Zaghouani. "May 2008" Includes bibliographical references.

APA, Harvard, Vancouver, ISO, and other styles

9

Pinhero, Reena Grittle. "Biochemical mechanisms of chilling tolerance in maize." Thesis, National Library of Canada = Bibliothèque nationale du Canada, 1998. http://www.collectionscanada.ca/obj/s4/f2/dsk2/ftp03/NQ27463.pdf.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

Whitley, Nathaniel T. "Mechanisms in antigen-specific tolerance induction therapy." Thesis, University of Bristol, 2005. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.411069.

Full text

APA, Harvard, Vancouver, ISO, and other styles

More sources

Books on the topic "Tolerances mechanism"

1

Hasanuzzaman, Mirza, Kamrun Nahar, and Masayuki Fujita, eds. Mechanisms of Arsenic Toxicity and Tolerance in Plants. Springer Singapore, 2018. http://dx.doi.org/10.1007/978-981-13-1292-2.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

K, Garg B. Salinity tolerance in plants: Methods, mechanisms, and management. Scientific Publishers (India), 2011.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

3

Cherry, Joe H., ed. Biochemical and Cellular Mechanisms of Stress Tolerance in Plants. Springer Berlin Heidelberg, 1994. http://dx.doi.org/10.1007/978-3-642-79133-8.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

1934-, Cherry Joe H., North Atlantic Treaty Organization. Scientific Affairs Division., and NATO Advanced Research Workshop on Biochemical and Cellular Mechanisms of Stress Tolerance in Plants (1993 : Maratea, Italy), eds. Biochemical and cellular mechanisms of stress tolerance in plants. Springer-Verlag, 1994.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

5

Development, North Atlantic Treaty Organization Advisory Group for Aerospace Research and. Damage tolerance concepts for critical engine components. AGARD, 1985.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

6

Mäntylä, Einar. Molecular mechanisms of cold acclimation and drought tolerance in plants. Swedish University of Agricultural Sciences, 1997.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

7

M, Kennedy John. Damage tolerance of woven graphite/epoxy buffer strip panels. National Aeronautics and Space Administration, Langley Research Center, 1990.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

8

Hanna, Michael N. Molecular mechanisms involved in the acid tolerance response of Streptococcus mutans. National Library of Canada, 2001.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

9

Yang, Chun-Ping. Cellular mechanisms of blood transfusion induced-tolerance preventing rejection of cardiac allografts. University of Manchester, 1995.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

10

Chamis, C. C. Progressive fracture and damage tolerance of composite pressure vessels. National Aeronautics and Space Administration, 1997.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

More sources

Book chapters on the topic "Tolerances mechanism"

1

Akhadkar, Narendra, Vincent Acary, and Bernard Brogliato. "Influence of imperfect joints and geometrical tolerances on a circuit breaker dynamics." In Advances in Mechanism and Machine Science. Springer International Publishing, 2019. http://dx.doi.org/10.1007/978-3-030-20131-9_302.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Mishra, Pratikshya, Smruti Ranjan Padhan, Jyoti Prakash Sahoo, et al. "Molecular Understanding of Signaling Compounds for Optimizing Cell Signal Transduction Mechanism under Abiotic Stresses in Crop Plants." In Multiple Abiotic Stress Tolerances in Higher Plants. CRC Press, 2023. http://dx.doi.org/10.1201/9781003300564-11.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Dsouza, Darren Alton, Ankur Jaiswal, and H. P. Jawale. "Positional Error Estimation of Five-Bar Mechanism Under the Influence of Tolerances." In Lecture Notes in Mechanical Engineering. Springer Nature Singapore, 2022. http://dx.doi.org/10.1007/978-981-19-3716-3_5.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Husch, Julia, and Michael S. J. Walter. "Tolerances in Mechanisms." In Research in Tolerancing. Springer Nature Switzerland, 2024. http://dx.doi.org/10.1007/978-3-031-64225-8_4.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Zeng, Defu, and Samuel Strober. "Mechanisms of Tolerance." In Thomas’ Hematopoietic Cell Transplantation. John Wiley & Sons, Ltd, 2016. http://dx.doi.org/10.1002/9781118416426.ch12.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Kruisbeek, Ada M., John D. Nieland, and Lori A. Jones. "Mechanism of Tolerance Induction." In Advances in Experimental Medicine and Biology. Springer US, 1992. http://dx.doi.org/10.1007/978-1-4615-3396-2_13.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

Badell, Raul, and Allan D. Kirk. "Mechanisms of Allograft Tolerance." In Textbook of Organ Transplantation. John Wiley & Sons, Ltd, 2014. http://dx.doi.org/10.1002/9781118873434.ch11.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

Hoekenga, Owen A., and Jurandir V. Magalhaes. "Mechanisms of Aluminum Tolerance." In Root Genomics. Springer Berlin Heidelberg, 2010. http://dx.doi.org/10.1007/978-3-540-85546-0_6.

Full text

APA, Harvard, Vancouver, ISO, and other styles

9

Arnold, B., G. Schönrich, and G. J. Hämmerling. "Mechanisms of Extrathymic Tolerance." In Symposium in Immunology I and II. Springer Berlin Heidelberg, 1993. http://dx.doi.org/10.1007/978-3-642-78087-5_12.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

Haddad, Gabriel G. "Mechanisms of Anoxia Tolerance." In Oxygen Transport to Tissue XX. Springer US, 1998. http://dx.doi.org/10.1007/978-1-4615-4863-8_32.

Full text

APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Tolerances mechanism"

1

Anand, Monika, Pramod Kumar, Rakeshnag Dasari, Swaroop Reddy Gayam, Isa Bayhan, and Mahendran N. "Secure Byzantine Fault Tolerance Mechanisms for Quantum Computing." In 2025 International Conference on Intelligent Control, Computing and Communications (IC3). IEEE, 2025. https://doi.org/10.1109/ic363308.2025.10956760.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Anand, Monika, Pramod Kumar, Rakeshnag Dasari, Swaroop Reddy Gayam, Isa Bayhan, and Mahendran N. "Secure Byzantine Fault Tolerance Mechanisms for Quantum Computing." In 2025 4th OPJU International Technology Conference (OTCON) on Smart Computing for Innovation and Advancement in Industry 5.0. IEEE, 2025. https://doi.org/10.1109/otcon65728.2025.11070480.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Wiencek, K. Mark, and John S. Chapman. "Water Treatment Biocides: How Do They Work and Why Should You Care?" In CORROSION 1999. NACE International, 1999. https://doi.org/10.5006/c1999-99308.

Full text

Abstract:

Abstract A variety of different microbicides employing different mechanisms of action (MOA) are used to control microbial growth in cooling water systems. Although dosing strategies are often based on the target organisms and their behavior within the system, targets within the microbes can be equally important for designing and optimizing an effective treatment program. In addition, an understanding of the mechanisms of the microbicides can often provide insight into the proper use of the microbicides, and can be a useful tool in troubleshooting problems. Cooling water microbicides can be cla

APA, Harvard, Vancouver, ISO, and other styles

4

Tsai, Jhy-Cherng. "Geometric Tolerance Analysis for Mechanism Design." In ASME 1996 Design Engineering Technical Conferences and Computers in Engineering Conference. American Society of Mechanical Engineers, 1996. http://dx.doi.org/10.1115/96-detc/dac-1053.

Full text

Abstract:

Abstract Manufacturing tolerances and joint clearances are the two major factors affecting mechanism accuracy. As error analysis is one of the bottlenecks of precision machinery design, methods for geometric tolerance analysis must be investigated for mechanism design. This paper describes an approach for analyzing errors caused by geometric tolerances and clearances in mechanism design. The method consists of three parts: variational kinematic models for geometric tolerances, a systematic geometric dimensioning and tolerancing (GD&T) representation scheme, and computation methods for inte

APA, Harvard, Vancouver, ISO, and other styles

5

Ting, Kwun-Lon, and Yufeng Long. "Performance Quality, Sensitivity, and Tolerance Specification of Mechanisms." In ASME 1994 Design Technical Conferences collocated with the ASME 1994 International Computers in Engineering Conference and Exhibition and the ASME 1994 8th Annual Database Symposium. American Society of Mechanical Engineers, 1994. http://dx.doi.org/10.1115/detc1994-0217.

Full text

Abstract:

Abstract By employing Taguchi’s concept to mechanism synthesis, this paper presents the theory and technique to identify a robust design, which is the least sensitive to the tolerances, for mechanisms and to determine the tolerance specification for the best performance and manufacturability. The method is demonstrated in finite and infinitesimal position synthesis. The sensitivity Jacobian is first introduced to relate the performance tolerances and the dimensional tolerances. The Rayleigh quotient of the sensitivity Jacobian, which is equivalent to Taguchi’s signal to noise ratio, is then us

APA, Harvard, Vancouver, ISO, and other styles

6

Saab, Wael, and Pinhas Ben-Tzvi. "Development of a Novel Coupling Mechanism for Modular Self-Reconfigurable Mobile Robots." In ASME 2015 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. American Society of Mechanical Engineers, 2015. http://dx.doi.org/10.1115/detc2015-46659.

Full text

Abstract:

This paper presents the development of a novel coupling mechanism for modular self-reconfigurable mobile robots. Modular self-reconfigurable mobile robotic systems consist of a large number of self-sufficient modules that can transform into various configurations. One of the most challenging tasks in this field is designing a reliable and flexible coupling mechanism that physically connects modules to form larger and more articulated structures to scale up locomotion and manipulation functions. In this research we propose GHEFT: a Genderless, High strength, Efficient, Fail-safe, and high misal

APA, Harvard, Vancouver, ISO, and other styles

7

Biswas, Arunava, and Gary L. Kinzel. "A Multi-Criteria Optimization Method for Mechanism Tolerance and Clearance Design." In ASME 1998 Design Engineering Technical Conferences. American Society of Mechanical Engineers, 1998. http://dx.doi.org/10.1115/detc98/mech-5944.

Full text

Abstract:

Abstract A procedure has been developed for optimally allocating tolerances and clearances in single loop planar and spatial mechanisms for minimum cost and minimum sensitivity to parameter variations. The cost of incorporating individual tolerances and clearances using specific manufacturing processes and their overall effects (sensitivities) on the whole assembly is established for each individual part. These are then incorporated into a multicriteria nonlinear optimization procedure to obtain the best tolerance and clearance specification for a part and the best manufacturing process. The p

APA, Harvard, Vancouver, ISO, and other styles

8

Pierce, Robert Scott, and David Rosen. "A Method for Integrating Form Errors Into Geometric Tolerance Analysis." In ASME 2005 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. ASMEDC, 2005. http://dx.doi.org/10.1115/detc2005-84343.

Full text

Abstract:

In this research we describe a computer-aided approach to geometric tolerance analysis for assemblies and mechanisms. This new tolerance analysis method is based on the “generate-and-test” approach. A series of as-manufactured component models are generated within a NURBS-based solid modeling environment. These models reflect errors in component geometry that are characteristic of the manufacturing processes used to produce the components. The effects of different manufacturing process errors on product function is tested by simulating the assembly of these imperfect-form component models and

APA, Harvard, Vancouver, ISO, and other styles

9

Rajagopalan, Sanjay, and Mark R. Cutkosky. "Tolerance Representation for Mechanism Assemblies in Layered Manufacturing." In ASME 1998 Design Engineering Technical Conferences. American Society of Mechanical Engineers, 1998. http://dx.doi.org/10.1115/detc98/dfm-5726.

Full text

Abstract:

Abstract By building parts up incrementally in layers or “compacts,” 3D layered manufacturing processes are capable of fabricating parts with complex internal geometry and multiple materials. Additionally, since parts are built fully embedded in a sacrificial support material, it is possible to fabricate fully assembled devices with multiple moving parts and mating/fitting surfaces (such as mechanisms). Given the method of manufacture, it becomes possible to provide designers of linkages with some flexibility in expressing constraints on the manufactured geometry of these parts. For example, d

APA, Harvard, Vancouver, ISO, and other styles

10

Patil, Chinmaya B., S. V. Sreenivasan, and Raul G. Longoria. "Robust Design of Flexure Based Nano Precision Compliant Mechanisms With Application to Nano Imprint Lithography." In ASME 2008 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. ASMEDC, 2008. http://dx.doi.org/10.1115/detc2008-50114.

Full text

Abstract:

Flexure-based compliant mechanisms are the preferred motion guiding systems for small range, nano-precision positioning applications because of excellent characteristics like friction-free continuous motion. These mechanisms are commonly used in nano fabrication equipment and ultra precision instruments. However, machining imperfections induced geometric errors in the mechanisms are known to cause undesirable parasitic motion and significant loss of precision. A systematic design approach to minimize the sensitivity of the flexure mechanisms to geometric errors induced by machining tolerances

APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Tolerances mechanism"

1

Chatila, Talal. Mechanisms of Oral Tolerance Breakdown in Food Allergy. Defense Technical Information Center, 2013. http://dx.doi.org/10.21236/ada602791.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Grene Alscher, Ruth, Jonathan Gressel, Carole Cramer, Abraham Warshawsky, and Elizabeth Grabau. Mechanisms of Oxidant Resistance in Weed and Crop Species. United States Department of Agriculture, 1996. http://dx.doi.org/10.32747/1996.7613041.bard.

Full text

Abstract:

A large body of evidence has accumulated showing that plant strains that are tolerant to a particular oxidant stress have a modicum of cross-tolerance to other oxidant stresses, whether caused by transient heat, drought, cold or oxidizing air pollutants or herbicides. We have studied a multienzyme scavenging system associated with oxidant tolerance at the metabolic and molecular levels in the model systems of pea and Conyza. Data from our experimental systems suggest that both development and subcellular compartmentalization play important roles in stress tolerance. The behavior of the chlorop

APA, Harvard, Vancouver, ISO, and other styles

3

Blum, Abraham, and Henry Nguyen. Physiological and Biochemical Mechanisms of Heat Tolerance in Wheat. United States Department of Agriculture, 1993. http://dx.doi.org/10.32747/1993.7603833.bard.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Sela, Shlomo, and Michael McClelland. Investigation of a new mechanism of desiccation-stress tolerance in Salmonella. United States Department of Agriculture, 2013. http://dx.doi.org/10.32747/2013.7598155.bard.

Full text

Abstract:

Low-moisture foods (LMF) are increasingly involved in foodborne illness. While bacteria cannot grow in LMF due to the low water content, pathogens such as Salmonella can still survive in dry foods and pose health risks to consumer. We recently found that Salmonella secretes a proteinaceous compound during desiccation, which we identified as OsmY, an osmotic stress response protein of 177 amino acids. To elucidate the role of OsmY in conferring tolerance against desiccation and other stresses in Salmonella entericaserovarTyphimurium (STm), our specific objectives were: (1) Characterize the invo

APA, Harvard, Vancouver, ISO, and other styles

5

Pociecha, Ewa, Magdalena Wójcik-Jagła, Agata Daszkowska-Golec, Maciej Grzesiak, Damian Gruszka, and Anna Janeczko. Mutation in the HvBRI1 and HvCPD genes involved in brassinosteroid biosynthesis/signalling enhances de-acclimation tolerance of barley. Publishing House of the University of Agriculture in Krakow, 2025. https://doi.org/10.15576/repourk/2025.1.2.

Full text

Abstract:

This dataset presents the results of a research which aimed to find out how mutation in the HvBRI1 and HvCPD genes affects the signalling and synthesis of brassinosteroids, and in consequence, influences de-acclimation tolerance of barley. We verified a hypothesis that temperature-dependent changes in the expression of selected genes contribute to de-acclimation tolerance. This study was aimed to identify the mechanisms responsible for differences between mutants and their reference cultivar – Bowman.

APA, Harvard, Vancouver, ISO, and other styles

6

Ladle, Brian H., and Elizabeth M. Jaffee. Dissecting the Mechanism of T Cell Tolerance for More Effective Breast Cancer Vaccine Development. Defense Technical Information Center, 2004. http://dx.doi.org/10.21236/ada435335.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

Nelson, Brad H. Eliciting Autoimmunity to Ovarian Tumors in Mice by Genetic Disruption of T Cell Tolerance Mechanisms. Defense Technical Information Center, 2002. http://dx.doi.org/10.21236/ada409619.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

Nelson, Brad H. Eliciting Autoimmunity to Ovarian Tumors in Mice by Genetic Disruption of T Cell Tolerance Mechanisms. Defense Technical Information Center, 2006. http://dx.doi.org/10.21236/ada462679.

Full text

APA, Harvard, Vancouver, ISO, and other styles

9

Wilkowski. PR-276-04503-R02 Multi-Scale Mechanics and Welding Process Simulation in Weld Integrity Assessment. Pipeline Research Council International, Inc. (PRCI), 2014. http://dx.doi.org/10.55274/r0010845.

Full text

Abstract:

This report is on a jointly funded project by DOE and PRCI. The DOE version of this report was separately published in 2008. This project dealt with various aspects of prediction of the stress-based and strain-based girthweld flaw tolerance of linepipe steels, as well as some supplementary investigations.

APA, Harvard, Vancouver, ISO, and other styles

10

Guy, Charles, Gozal Ben-Hayyim, Gloria Moore, Doron Holland, and Yuval Eshdat. Common Mechanisms of Response to the Stresses of High Salinity and Low Temperature and Genetic Mapping of Stress Tolerance Loci in Citrus. United States Department of Agriculture, 1995. http://dx.doi.org/10.32747/1995.7613013.bard.

Full text

Abstract:

The objectives that were outlined in our original proposal have largely been achieved or will be so by the end of the project in February 1995 with one exception; that of mapping cold tolerance loci based on the segregation of tolerance in the BC1 progeny population. Briefly, our goals were to 1) construct a densely populated linkage map of the citrus genome: 2) map loci important in cold and/or salt stress tolerance; and 3) characterize the expression of genes responsive to cold land salt stress. As can be seen by the preceding listing of accomplishments, our original objectives A and B have

APA, Harvard, Vancouver, ISO, and other styles

We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!