Relevant bibliographies by topics / Xrd analysis of stainless steel

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Books
  4. Book chapters
  5. Conference papers
  6. Reports

Academic literature on the topic 'Xrd analysis of stainless steel'

Author: Grafiati
Published: 3 June 2025
Last updated: 31 July 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Xrd analysis of stainless steel.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Xrd analysis of stainless steel"

1

Habibullah, Pervaiz. "Identification of Defects of Stainless Steel Sold with Brand Names, by Studying their Surface Thin Films with Scanning Electron Microscope (SEM)." Key Engineering Materials 622-623 (September 2014): 53–63. http://dx.doi.org/10.4028/www.scientific.net/kem.622-623.53.

Full text
Abstract:
In the present paper, we have studied the thin films formed on the commercial stainless steel sold under different brand names in Pakistan with the help of SEM, EDX and XRD and have further investigated that how such stainless steels lose their brightness and become dull. A sample of recycled stainless steel melted in induction furnace was taken for study. The analysis of the layer formed is as follows: wt. %, C = 6.55, O = 6.20, Na = 0.47, Mg = 0.31, Al = 2.28, Si = 1.23, Cr = 15.42, Mn = 1.06, Fe = 59.58, Ni = 6.91 Total = 100, Atomic %, C = 21.02 O = 14.93, Na = 0.79, Mg = 0.49, Al = 3.26,
APA, Harvard, Vancouver, ISO, and other styles
2

Xie, Guo Liang, Qiang Song Wang, Xu Jun Mi, et al. "Analysis of Microstructures and XRD of a Gradient Boron Alloyed Composite Material." Advanced Materials Research 680 (April 2013): 113–18. http://dx.doi.org/10.4028/www.scientific.net/amr.680.113.

Full text
Abstract:
A new type of gradient boron alloyed composite material, containing boron alloyed core layers and stainless steel coatings around the core, were designed and prepared by composite casting and hot rolling. The evolution of microstructures, phases and precipitations, as well as their influence on hot rolling process and performance are investigated. A mixture of austenitic matrix and uniformly distributed borides are obtained in the hot rolled stainless steel with 2-2.5 % boron, while massive borides are in the length of 80-120 μm together with micro gaps at the interface between the borides, an
APA, Harvard, Vancouver, ISO, and other styles
3

Wei, De Qiang, Xin Dong, and Shan Qiu Li. "Failure Analysis of Stress Corrosion Crack of 1Cr18Ni9 Stainless Steel Cylinder Body." Advanced Materials Research 591-593 (November 2012): 1094–97. http://dx.doi.org/10.4028/www.scientific.net/amr.591-593.1094.

Full text
Abstract:
As a kind of corrosion resistant material, stainless steel is widely used in petroleum, chemical, pharmaceutical. Stress corrosion cracking is a main reason that why the stainless steel became disabled. Therefore, it is very necessary to research and study the stress corrosion cracking of stainless steel .The failure analysis to the sample is conducted aiming at the stress corrosion of the stainless steel piston cylinder in a factory. The analysis includes macro analysis, metallographic observation, scanning electron microscopy analysis and XRD analysis. The results of the study show that it i
APA, Harvard, Vancouver, ISO, and other styles
4

Tulinski, Maciej, Karolina Jurczyk, and Mieczyslaw Jurczyk. "Nanoscale Nickel-Free Austenitic Stainless Steel." Solid State Phenomena 140 (October 2008): 179–84. http://dx.doi.org/10.4028/www.scientific.net/ssp.140.179.

Full text
Abstract:
In this work Ni-free austenitic stainless steels with nanostructure were synthesized by mechanical alloying (MA), heat treatment and nitrogenation of elemental Fe, Cr, Mn and Mo microcrystalline powders. The phase transformation from ferritic to austenitic was confirmed by XRD analysis. The mechanical and corrosion properties of the produced biomaterials were investigated. Additionally, the biocompatibility of nickel-free austenitic stainless steels with nanostructure and microcrystalline 316L steel, were analyzed studying the behaviour of Normal Human Osteoblast (NHOst) cells from Cambrex (CC
APA, Harvard, Vancouver, ISO, and other styles
5

V, Vinoth, Sathiyamurthy S, Prabhakaran J, Harsh Vardhan, Sundaravignesh S, and Sanjeevi Prakash K. "Tensile, Hardness, XRD and Surface Vonmises Stress of 316 L Stainless Steel Built by Wire Arc Additive Manufacturing (WAAM)." Journal of Manufacturing Engineering 17, no. 3 (2022): 098–103. http://dx.doi.org/10.37255/jme.v17i3pp098-103.

Full text
Abstract:
Wire arc additive manufacturing (WAAM) is a popular wire feed additive manufacturing technology that creates components through the deposition of material layer-by-layer. WAAM has become a promising alternative to conventional machining due to its high deposition rate, environmental friendliness, and cost-competitiveness. It is used to Fabricate complex shaped parts. The variable parameters are current, welding speed, shielding gas, and gas flow rate. This research fabricates 316 L stainless steel (WAAM plate) using a wire arc welding robot machine. Substrate and Side edges are removed using M
APA, Harvard, Vancouver, ISO, and other styles
6

Ludwig, Gustavo Alberto, Matias Angelis Korb, A. Bervian, C. P. Bergmann, and Célia de Fraga Malfatti. "Formation of Spinel from Fe-Ni Coating Electrodeposited on AISI 430 Ferritic Stainless Steel." Materials Science Forum 798-799 (June 2014): 328–33. http://dx.doi.org/10.4028/www.scientific.net/msf.798-799.328.

Full text
Abstract:
Ferritic stainless steels exhibit properties, such as good electrical conductivity, good corrosion resistance and low cost, that are beneficial for their application as interconnects in intermediate temperature solid oxide fuel cells (ITSOFC) that function at temperatures between 600°C and 800°C. However, the stainless steel corrosion resistance is attributed to the amount of Cr, which is an element that forms a chromium oxide (Cr2O3) layer, acts as an oxidation protective barrier at high temperatures, and reduces the interconnector performance due to its low electrical conductivity. In this c
APA, Harvard, Vancouver, ISO, and other styles
7

Cunningham, N., J. P. Dodelet, D. Guay, G. G. Ross, A. R. Hlil, and A. S. Hay. "RBS and XRD analyses of carbon-coated stainless steel plates." Surface and Coatings Technology 183, no. 2-3 (2004): 216–23. http://dx.doi.org/10.1016/j.surfcoat.2003.08.088.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Morelos-López, E., A. Cabral-Prieto, N. Nava, F. García-Santibañez, and C. Nosetti. "CXMS and XRD analyses of heat treated A533B stainless steel." Hyperfine Interactions 226, no. 1-3 (2014): 737–46. http://dx.doi.org/10.1007/s10751-013-1004-5.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Su, Jian Xiu, Jia Peng Chen, Qing Li, and Hong Quan Qin. "Study on Slurry of Chemical Mechanical Polishing 304 Stainless Steel Based on Ferric Chloride and Oxalic Acid." Materials Science Forum 861 (July 2016): 102–7. http://dx.doi.org/10.4028/www.scientific.net/msf.861.102.

Full text
Abstract:
Stainless steel will become one of the substrate materials used in flexible display. In this paper, the influence of the ferric chloride and the oxalic acid on the material removal rate (MRR) and surface roughness had been studied in the chemical mechanical polishing (CMP) 304 stainless steel. By analysis and research, the slurry ingredients based on the type of ferric chloride and oxalic acid had been obtained. The experimental results show that, the material removal rate reached more than 200nm/min. By the qualitative analysis on the phases of the surface material of 304 stainless steel usin
APA, Harvard, Vancouver, ISO, and other styles
10

Zeng, Yanggen, Yujing Hu, Zhensheng Wang, Yi Xie, and Weike Liu. "Performance analysis and material selection of stainless steel expansion joints for power grid equipment." Journal of Physics: Conference Series 2076, no. 1 (2021): 012097. http://dx.doi.org/10.1088/1742-6596/2076/1/012097.

Full text
Abstract:
Abstract Stainless steel expansion joint, as the connecting part of GIS equipment, has the function of compensating the deformation of GIS caused by cold and hot stress. And it should at least meet the requirements of anti-corrosion and non-magnetic according to the working environment. This work investigate the performance of 304, 316L and 825 austenitic stainless steel expansion joints by metallographic analysis, hardness test, XRD analysis and magnetic analysis, and suggestions on material selection of expansion joint for power grid equipment are put forward.
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Xrd analysis of stainless steel"

1

Lundberg, Daniel, Filip Wilson, Hjalmar Gunnarsson, Leo Sjörén, Robin Xu, and Erik Djurberg. "Long term aging and creep exposure for advanced heat resistant alloys : A phase analysis." Thesis, Uppsala universitet, Institutionen för materialvetenskap, 2021. http://urn.kb.se/resolve?urn=urn:nbn:se:uu:diva-446407.

Full text
Abstract:
This project was ordered by Sandvik Materials Technology and was performed by a group of students at Uppsala university. The purpose of the project was to study precipitation behavior and structure stability in six advanced heat resistant alloys. Each sample were subjected to a creep rupture test in 600 or 700°C depending on the alloy type. Two parts of each alloy where examined; one part which had been affected by creep and another part which was unaffected by creep. A literature study was performed first to gain knowledge of the scientific theory utilized in this project, namely creep, preci
APA, Harvard, Vancouver, ISO, and other styles
2

Gentil, Johannes Axel. "Surface Modification of Superaustenitic and Maraging Stainless Steels by Low-Temperature Gas-Phase Carburization." Case Western Reserve University School of Graduate Studies / OhioLINK, 2008. http://rave.ohiolink.edu/etdc/view?acc_num=case1228456491.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Salih, Elwaleed Lutfi Mohamed. "Analysis and design of stainless steel bolted connections." Thesis, Imperial College London, 2010. http://hdl.handle.net/10044/1/5749.

Full text
Abstract:
The use of stainless steel in construction is steadily growing, with applications designed to exploit its structural properties, durability, appearance and fire resistance. The mechanical behaviour of stainless steel is fundamentally different from that of carbon steel. The stress-strain curve of stainless steel is rounded without a well-defined yield stress and exhibits significant strain hardening at relatively small strains. Nevertheless, design provisions for bolted connections between stainless steel structural members in current international standards are essentially based on the rules
APA, Harvard, Vancouver, ISO, and other styles
4

jahanzeb, Nabeel. "Erosion during Brazing in Stainless Steel grade 304." Thesis, KTH, Materialvetenskap, 2012. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-116688.

Full text
Abstract:
The erosion or dissolution of stainless steel grade 304 as base metal by molten brazing fillermetal was investigated using one nickel and two iron based filler metals. The difference betweentwo iron filler metal is 5 % Manganese content in one of the filler metal. The Wettability of fillermetal is effected by oxidation of base or filler metal for which high vacuum or non reacting gasis used as a furnace atmosphere to reduce the partial pressure of oxygen. The furnace parameterseffecting erosion of base metal was observed e.g. peak temperature and brazing time. The effectof filler mass was also
APA, Harvard, Vancouver, ISO, and other styles
5

Maruma, Mpho Given. "Effect of composition and thermomechanical processing on the texture evolution, formability and ridging behavior of type AISI 441 ferritic stainless steel." Diss., University of Pretoria, 2013. http://hdl.handle.net/2263/40839.

Full text
Abstract:
Global warming and air pollution are the major problems facing the world today. Therefore strict environmental legislation on the emission of harmful gases from motor vehicles has forced the automobile industry to search for alternative materials or new materials for exhaust systems. In order to produce cleaner exhaust gases, the exhaust temperature needs to be increased to approximately 900oC. Therefore, exhaust manifolds are exposed repeatedly to hot gases as they are nearest to the engine requiring good oxidation resistance, thermal fatigue properties, cold workability and weldability. One
APA, Harvard, Vancouver, ISO, and other styles
6

Silva, Eloy de Macedo. "Fractal analysis of fracture surface of Duplex Stainless steel UNS S31803." Universidade Federal do CearÃ, 2002. http://www.teses.ufc.br/tde_busca/arquivo.php?codArquivo=7306.

Full text
Abstract:
CoordenaÃÃo de AperfeiÃoamento de Pessoal de NÃvel Superior<br>In the last years, the fractal geometry has become widely studied. Its application in several areas increased substantially, particularly in materials engineering and science, aiming the analysis of failures and the study of the mechanical properties of materials. Some studies have shown the relationship between the fracture surfaces and their mechanical properties using the fractal geometry and its properties of fractal dimension and selfsimilarity. In this research, the fracture surface of duplex stainless steel, which was obtain
APA, Harvard, Vancouver, ISO, and other styles
7

Nöbauer, Henrik. "Residual stresses and distortions in austenitic stainless steel 316L specimens manufactured by Selective Laser Melting." Thesis, Högskolan Väst, Avdelningen för svetsteknologi (SV), 2018. http://urn.kb.se/resolve?urn=urn:nbn:se:hv:diva-12771.

Full text
Abstract:
Residual stresses are one of the major challenges in additive manufacturing of metallic materials today. They are induced during manufacturing because of the rapid local heating and cooling and may cause distortions, cracking and delamination between layers. The magnitude of the residual stresses depends on factors such as manufacturing technology, material, part geometry, scanning strategy, process parameters, preheating temperature and density of the component. In the present work, the magnitudes of residual stresses and distortions in austenitic stainless steel 316L components manufactured
APA, Harvard, Vancouver, ISO, and other styles
8

Qui, Jianhai. "A study by solution and surface analysis of passivation of stainless steel." Thesis, University of Surrey, 1989. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.328789.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Rajput, Ajeet Singh, Henning Zeidler, and Andreas Schubert. "Analysis of voltage and current during the Plasma electrolytic Polishing of stainless steel." Universitätsbibliothek Chemnitz, 2017. http://nbn-resolving.de/urn:nbn:de:bsz:ch1-qucosa-227115.

Full text
Abstract:
Plasma electrolytic Polishing (PeP) is a non-conventional technology for the surface treatment of electrically conductive materials. It is an effective machining technique for cleaning and polishing of metals and considered as a more environmentally friendly alternative to the electropolishing process. The electropolishing process uses aggressive media such as acids, whereas in PeP, acids or toxicants are replaced by low concentrated water solutions of various salts. In PeP, high DC voltage is applied to the electrodes in the aqueous electrolyte solution, which establishes a thin steam-gas lay
APA, Harvard, Vancouver, ISO, and other styles
10

Sobeih, Mahmoud Omar R. J., and Moazzam Maqsood. "Influence of Hydrogen Charging on Mechanical Properties and Microstructure of Structural Steel S235 & Stainless Steel 316L." Thesis, Blekinge Tekniska Högskola, Institutionen för maskinteknik, 2019. http://urn.kb.se/resolve?urn=urn:nbn:se:bth-18792.

Full text
Abstract:
The present paper studied the influence of hydrogen on the mechanical properties and microstructure of the materials. This study is done by doing hydrogen charging of steel bar specimens. The two types of steel are used for study, structural steel S235 and stainless steel 316L. The tensile test has been performed to get the data of the charged and uncharged specimens. Different strain rates were used to study the effect of the material after charging. The charging time ranged from 24 hours to 144 hours. The specimens are cylindrical shape. Digital image analysis is performed for the uncharged
APA, Harvard, Vancouver, ISO, and other styles
More sources

Books on the topic "Xrd analysis of stainless steel"

1

Lee, A. S. Buckling analysis of spent fuel basket. Division of Industrial and Medical Nuclear Safety, Office of Nuclear Material Safety and Safeguards, U.S. Nuclear Regulatory Commission, 1995.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
2

Howell, William R. N. An analysis of possible microbiologically influenced crevice corrosion of 316 stainless steel in a seawater environment. Available from National Technical Information Service, 1996.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
3

Patel, Vipulkumar, Qing Quan Liang, and Muhammad Hadi. Concrete-Filled Stainless Steel Tubular Columns. Taylor & Francis Group, 2018.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
4

Patel, Vipulkumar, Qing Quan Liang, and Muhammad Hadi. Concrete-Filled Stainless Steel Tubular Columns. Taylor & Francis Group, 2018.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
5

Patel, Vipulkumar, Qing Quan Liang, and Muhammad Hadi. Concrete-Filled Stainless Steel Tubular Columns. Taylor & Francis Group, 2018.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
6

Patel, Vipulkumar, Qing Quan Liang, and Muhammad Hadi. Concrete-Filled Stainless Steel Tubular Columns. Taylor & Francis Group, 2018.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
7

Patel, Vipulkumar, Qing Quan Liang, and Muhammad N. S. Hadi. Concrete-Filled Stainless Steel Tubular Columns. Taylor & Francis Group, 2020.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
8

Concrete-Filled Stainless Steel Tubular Columns. CRC Press, 2018.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
9

Cantrell, Mark. Analysis of sodium plasma hardened stainless steel: The effect of B and SI transport. 1988.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
10

Annual Book of Astm Standards 1999: Section 1 : Iron and Steel Products : Volume 01.03 : Steel-Plate, Sheet, Strip, Wire; Stainless Steel Bar (Annual Book of a S T M Standards Volume 0103). Astm Intl, 1999.

Find full text
APA, Harvard, Vancouver, ISO, and other styles

Book chapters on the topic "Xrd analysis of stainless steel"

1

Heino, S., E. M. Knutson-Wedel, and B. Karlsson. "Intermetallic precipitates in superaustenitic stainless steel welds." In Electron Microscopy and Analysis 1997. CRC Press, 2022. http://dx.doi.org/10.1201/9781003063056-144.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Patel, Vipulkumar Ishvarbhai, Qing Quan Liang, and Muhammad N. S. Hadi. "Nonlinear analysis of CFSST short columns." In Concrete-Filled Stainless Steel Tubular Columns. CRC Press, 2018. http://dx.doi.org/10.1201/9781351005708-2.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Patel, Vipulkumar Ishvarbhai, Qing Quan Liang, and Muhammad N. S. Hadi. "Nonlinear analysis of circular CFSST slender columns." In Concrete-Filled Stainless Steel Tubular Columns. CRC Press, 2018. http://dx.doi.org/10.1201/9781351005708-3.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Patel, Vipulkumar Ishvarbhai, Qing Quan Liang, and Muhammad N. S. Hadi. "Nonlinear analysis of rectangular CFSST slender columns." In Concrete-Filled Stainless Steel Tubular Columns. CRC Press, 2018. http://dx.doi.org/10.1201/9781351005708-4.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Yajima, Zenjiro, Ken-ichi Ishikawa, Toshihiko Sasaki, and Yukio Hirose. "X-ray Profile Analysis of 12% Chromium Stainless Steel." In Advances in X-Ray Analysis. Springer US, 1994. http://dx.doi.org/10.1007/978-1-4615-2528-8_43.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Sasaki, Katsunari, Yukio Hirose, and Toshihiko Sasaki. "Measurement of Retained Austenite in Stainless Steel Using Imaging Plate." In Advances in X-Ray Analysis. Springer US, 1994. http://dx.doi.org/10.1007/978-1-4615-2528-8_59.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Arora, Hitesh, Viranshu Kumar, Chander Prakash, et al. "Analysis of Sensitization in Austenitic Stainless Steel-Welded Joint." In Lecture Notes in Mechanical Engineering. Springer Singapore, 2020. http://dx.doi.org/10.1007/978-981-15-5151-2_2.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Grum, J., and D. Zuljan. "Thermal Response Analysis of Laser Cutting Austenitic Stainless Steel." In Advanced Manufacturing Systems and Technology. Springer Vienna, 1996. http://dx.doi.org/10.1007/978-3-7091-2678-3_59.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Yajima, Zenjiro, Hideki Tokuyama, Yasuo Kibayashi, and Yukio Hirose. "X-ray Fractography On Fatigue Fractured Surface Of Austenitic Stainless Steel." In Advances in X-Ray Analysis. Springer US, 1995. http://dx.doi.org/10.1007/978-1-4615-1797-9_51.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Yajima, Zenjiro, Yoichi Kishi, and Yukio Hirose. "X-Ray Quantitative Analysis of Transformed Martensite in Austentic Stainless Steel." In Advances in X-Ray Analysis. Springer US, 1997. http://dx.doi.org/10.1007/978-1-4615-5377-9_53.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Xrd analysis of stainless steel"

1

Ashiru, Oluwatoyin, and Abdullah Al-Refaie. "Pitting Corrosion Problems of Stainless Steels in a PTA Plant." In CORROSION 2007. NACE International, 2007. https://doi.org/10.5006/c2007-07196.

Full text
Abstract:
Abstract Severe pitting corrosion problems occurred in a Purified Terephthalic Acid (PTA) production plant. The materials of construction of the various vessels, columns, and piping that are of concern are 316L and 2205-Duplex stainless steels. The process stream consists of acetic acid solvent, para-xylene, and catalyst (Br−, Co++, and Mn++) at high temperature. In some instances, the corrosion pits developed into perforations through piping wall in units made of 316L-stainless steel which led to shutdowns. Failure analysis was undertaken to investigate the cause of the pitting corrosion in t
APA, Harvard, Vancouver, ISO, and other styles
2

West, D., J. Hulance, R. L. Higginson, and G. Wilcox. "Sigma Phase Precipitation in 347HFG Stainless Steel for Supercritical Power Plant Operation." In AM-EPRI 2010, edited by D. Gandy, J. Shingledecker, and R. Viswanathan. ASM International, 2010. http://dx.doi.org/10.31399/asm.cp.am-epri-2010p0972.

Full text
Abstract:
Abstract The microstructural evolution has been investigated for an 18Cr-12Ni stainless steel (347HFG) that has been subject to a thermo-mechanical treatment to obtain a fine grain size (ASTM 7-10). In particular, sigma phase precipitation and growth has been evaluated. Samples of 347HFG stainless steel have been isothermally heat treated to reproduce and accelerate the ageing conditions experienced in-service at temperatures between 600 and 750 °C for up to 10,000 hours. Results have shown that sigma phase is precipitated at triple points and along grain boundaries after as little as 1000 hou
APA, Harvard, Vancouver, ISO, and other styles
3

Boncz, Luca Blanka, Jens Lykke Sørensen, Lotte Holmegaard, and Morten Stendahl Jellesen. "Corrosion Investigations of Copper Alloys and Cast Stainless Steel Used for Drinking Water Applications." In CONFERENCE 2024. AMPP, 2024. https://doi.org/10.5006/c2024-20723.

Full text
Abstract:
Abstract Brass alloys are considered corrosion-resistant in potable water. However, chloride, disinfectants, and high flow rates were reported to weaken pipes, leading to leaks and damage. The degradation of copper alloys causes concern as metal ion release may affect water taste and human health in high concentrations. Therefore, materials with improved flow corrosion properties and increased corrosion resistance are needed. Failure investigations were performed on C52100 brass domestic water flowmeters by visual inspection, microstructural analysis with scanning electron microscope energy di
APA, Harvard, Vancouver, ISO, and other styles
4

Vepsäläinen, Mikko, Pekka Pohjanne, Jyrki Romu, et al. "Effect of Alloy Composition and Temperature on Corrosion Behavior of Stainless Steels in Hot Alkaline Solutions." In CORROSION 2013. NACE International, 2013. https://doi.org/10.5006/c2013-02618.

Full text
Abstract:
Abstract Corrosion behavior of austenitic stainless steel UNS(1) S30403, duplex stainless steels UNS S32101, UNS S32304, UNS S32205 and UNS S32507 as well as ferritic stainless steels UNS S43932 and ASTM(2) 444 was evaluated with U-bend specimens in alkaline solutions containing 500 g/l NaOH, 100 g/l NaOH + 55 g/l Na2S (hot white liquor [HWL]) and 15 g/l NaOH + 150 g/l Na2S (hot black liquor [HBL]) at temperatures of 140 and 190°C. Corrosion rates were determined from weight losses of the samples. The susceptibility to stress corrosion cracking (SCC) was characterized with optical microscopy a
APA, Harvard, Vancouver, ISO, and other styles
5

Ziomek-Moroz, M., and P. Jablonski. "Effects of Ceria Coatings on Materials Performance of 430 Steel in Coal Synthetic Gas." In CORROSION 2011. NACE International, 2011. https://doi.org/10.5006/c2011-11196.

Full text
Abstract:
Abstract Carbon, which is a reaction product of various reactions occurring in syngas at SOFC operating temperatures, can diffuse into metallic materials and cause carbon-induced corrosion (CIC) in the form of carburization or metal dusting. Therefore, The U.S. Department of Energy, National Energy Technology Laboratory is investigating susceptibility of 430-based stainless steel for the SOFC interconnect applications. The 430 stainless steel was modified in-house by reducing the amounts of silicon and aluminum. Also, the surfaces of some coupons were treated with ceria. In this research, the
APA, Harvard, Vancouver, ISO, and other styles
6

Troyanosky, Ellen K., Jianyu Liang, and Thomas L. Christiansen. "Sub-Zero Treatment of 17-4PH Stainless Steel Manufactured by Laser Powder Bed Fusion." In IFHTSE 2024. ASM International, 2024. http://dx.doi.org/10.31399/asm.cp.ifhtse2024p0167.

Full text
Abstract:
Abstract Additively manufactured (AM) metals require a modified heat treatment to accommodate for slight differences in composition caused by powder atomization and cover gas used in the manufacturing process. 17-4PH stainless steel (17-4PH) is a precipitation hardening steel which hardens through the formation of Cu precipitates in a martensitic matrix during aging treatment. The powders used in Laser Powder Bed Fusion (LPBF) fabrication of 17-4PH are typically spray atomized using N2 cover gas, which is associated with a certain amount of nitrogen uptake. Nitrogen is a potent austenite stabi
APA, Harvard, Vancouver, ISO, and other styles
7

Tjelta, M., and Jon Kvarekvål. "Corrosion of Candidate Materials for Use in Alkaline Water Electrolysis." In CORROSION 2019. NACE International, 2019. https://doi.org/10.5006/c2019-13297.

Full text
Abstract:
Abstract In alkaline water electrolysis the capital expense (CAPEX) of the electrolyzer unit is high and cost reduction, wherever possible, is highly desired. Many parts are made of expensive nickel-based alloys, which in some cases may be an overly conservative option. Careful evaluation of the operating conditions may reveal that expensive alloys may be replaced by cheaper ones in parts of the system. In this paper the corrosion behavior of candidate materials, relevant for use in atmospheric and pressurized alkaline water electrolysis systems, is evaluated at typical operating conditions (i
APA, Harvard, Vancouver, ISO, and other styles
8

Brady, Michael P., Donovan N. Leonard, James R. Keiser, Ercan Cakmak, and Lysle E. Whitmer. "Degradation of Components after Exposure in a Biomass Pyrolysis System." In CORROSION 2019. NACE International, 2019. https://doi.org/10.5006/c2019-13446.

Full text
Abstract:
Abstract X-ray diffraction (XRD), electron probe microanalysis (EPMA), and scanning transmission electron microscopy (STEM) with focused ion beam (FIB) lift-out sample preparation techniques were used to study corrosion products in a 304L (UNS30403) stainless steel fluidized-bed reactor segment from Iowa State University’s Pyrolysis Process Development Unit Facility (PPDU). This reactor segment is particularly valuable because a detailed history of operation time, temperature, and biomass feedstock was available. As previously reported for a range of stainless steel pyrolysis-related equipment
APA, Harvard, Vancouver, ISO, and other styles
9

Schnaut, Ulrich, George Furmanski, Kam Dianatkhah, and Bernd Berg. "Rolled Lined Corrosion Resistant Steel Pipes in Geothermal Environment: Investigation and Results of Field Tests." In CORROSION 2011. NACE International, 2011. https://doi.org/10.5006/c2011-11170.

Full text
Abstract:
Abstract In order to meet the severe corrosion requirements of the geothermal power plant environment, a new type of corrosion resistant rolled lined steel pipes was tested in the laboratory and geothermal field. The rolled lined steel pipe with a corrosion resistant alloy liner provides reliable and cost-efficient solutions to the prevailing types of stress corrosion cracking (SCC), erosion corrosion and pitting corrosion. This innovative and efficient lined pipe manufacturing process allows for the first time application of liner materials with a substantial level of grip such as duplex stai
APA, Harvard, Vancouver, ISO, and other styles
10

Thorhallsson, Andri Isak, Sigrun Nanna Karlsdottir, and Andri Stefansson. "Corrosion Testing of UNS S31603 in Simulated HT Geothermal Environment at Boiling, Superheated and Condensation Conditions." In CORROSION 2019. NACE International, 2019. https://doi.org/10.5006/c2019-13195.

Full text
Abstract:
Abstract Corrosion testing of austenitic stainless steel, UNS S31603 (AISI 316L), was conducted in flow-through reactors during early stages of lab setup development with the aim to obtain a superheated steam environment with H2S/CO2/HCl at 350°C and 10 bars. The test fluid; aqueous solution with the corrosive species was preheated, boiled and superheated in preheater before entering the reactors. But due to regular high-volume injection periods of the aqueous solution into the preheater and insufficient thermal insulation surrounding the test unit, a liquid droplet transportation into the rea
APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Xrd analysis of stainless steel"

1

Firsich, D. Electrochemical techniques for the analysis of corrosion in stainless steel components. 303 stainless steel in contact with TATB. Office of Scientific and Technical Information (OSTI), 1985. http://dx.doi.org/10.2172/5334364.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Brewer, E. D., W. R. Hendrich, D. G. Thomas, and J. E. Smith. Shield design, analysis, and testing to survive stainless steel projectiles. Office of Scientific and Technical Information (OSTI), 1990. http://dx.doi.org/10.2172/5087857.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Kruizenga, Alan Michael. Stainless steel corrosion by molten nitrates : analysis and lessons learned. Office of Scientific and Technical Information (OSTI), 2011. http://dx.doi.org/10.2172/1030333.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Lantz, L. X-ray fluorescence analysis of 304L stainless steel. Final report. Office of Scientific and Technical Information (OSTI), 1985. http://dx.doi.org/10.2172/5736908.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Wisutmethangoon, S., T. F. Kelly, P. P. Camus, J. E. Flinn, D. J. Larson, and M. K. Miller. Analysis of nanometer-scale precipitation in a rapidly solidified stainless steel. Office of Scientific and Technical Information (OSTI), 1997. http://dx.doi.org/10.2172/505350.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Jacobs, Taylor. Analysis of the MST-16 crimp process on cold 304L stainless steel. Office of Scientific and Technical Information (OSTI), 2021. http://dx.doi.org/10.2172/1836958.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Weiss, H., R. A. Van Konynenburg, and R. D. McCright. Metallurgical analysis of a 304L stainless steel canister from the Spent Fuel Test - Climax. Office of Scientific and Technical Information (OSTI), 1985. http://dx.doi.org/10.2172/59368.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Agu, Joemax, and Thankian Christopher. Alternative Testing and Analysis Methods for Validation of Fracture Toughness Evaluation AISI304 Stainless Steel. "Prof. Marin Drinov" Publishing House of Bulgarian Academy of Sciences, 2018. http://dx.doi.org/10.7546/crabs.2018.10.14.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Bradley, Natasha, Todd Henry, Mulugeta Haile, and Michael Coatney. Adaptive Data Analysis for Fatigue Studies of Additively Manufactured 17-4 PH Stainless Steel. DEVCOM Army Research Laboratory, 2022. http://dx.doi.org/10.21236/ad1180904.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Gussev, Maxim, Gabriel de Bellefon, and T. M. Rosseel. Analysis of Localized Deformation Processes in Highly Irradiated Austenitic Stainless Steel through In Situ Techniques. Office of Scientific and Technical Information (OSTI), 2019. http://dx.doi.org/10.2172/1661257.

Full text
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Xrd analysis of stainless steel' for particular source types:
Journal articles Dissertations / Theses
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography