Dissertations / Theses on the topic 'Minaev'
Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles
Consult the top 50 dissertations / theses for your research on the topic 'Minaev.'
Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.
You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.
Browse dissertations / theses on a wide variety of disciplines and organise your bibliography correctly.
Zama, Martina. "Proposta di traduzione e analisi del primo capitolo del romanzo di Sergej Minaev “Duchless 21 veka. Selfie”." Bachelor's thesis, Alma Mater Studiorum - Università di Bologna, 2018. http://amslaurea.unibo.it/16512/.
Ruggiero, Chiara. "Al di là del Cremlino. Analisi e proposta di traduzione del romanzo "Moskva, ja ne ljublju tebja" di Sergej Sergeevič Minaev." Master's thesis, Alma Mater Studiorum - Università di Bologna, 2017. http://amslaurea.unibo.it/12712/.
Lindberg, Rosemarie Kristine Rein. "Skolen i minnet : Skolegang under andre verdenskrig i Trondheim." Thesis, Norges teknisk-naturvitenskapelige universitet, Institutt for historiske studier, 2014. http://urn.kb.se/resolve?urn=urn:nbn:no:ntnu:diva-25387.
Navarrete, Paap Pamela Viviana. "Geometalurgia en la Planificación de una Mina a Cielo Abierto." Tesis, Universidad de Chile, 2007. http://www.repositorio.uchile.cl/handle/2250/104562.
Minet, Christophe. "Lubrification mixte dans les étanchéités dynamiques : application aux garnitures mécaniques d'étanchéité." Poitiers, 2009. http://theses.edel.univ-poitiers.fr/theses/2009/Minet-Christophe/2009-Minet-Christophe-These.pdf.
Mechanical face seals are commonly used in industrial applications. The main purpose of these components is to insure the sealing of rotating shafts. A mechanical seal is basically a set of two rings whose contact is lubricated by the sealed fluid. The optimal point of operation is reached by minimizing both leakage and wear. The average film thickness is then about one micrometer and the seal is operating in mixed lubrication conditions. In this case, the faces are not completely separated by the fluid film and asperity contact occurs. The choice of a deterministic approach was justified from a detailed bibliographical analysis. An accurate description of the surfaces roughness was required, as well as the development of a numerical modelling tool able to simulate it. A metrological study was realised on samples of mechanical seal surfaces at several stages of operation. The statistical parameters obtained from the surfaces roughness could thus be evaluated and used in a numerical model enabling the generation of non Gaussian surfaces. A deterministic flow model for mixed lubrication in mechanical seals is then presented. It takes the cavitation effects and normal hertzian asperity contact into account. The equation of flow rate conservation in the contact was solved using finite volume method. A parametric study was carried out on four statistically equivalent simulated surfaces. The model highlights the increase in load capacity due to the roughness, although the mean surfaces are flat and parallel. Stribeck curves have been obtained for each studied case. The standard deviation of the roughness is the major parameter influencing the coefficient of friction. Furthermore, the development of microcavitation, which mostly depends on the roughness distribution, influences the results to a great extent
Rutter, Anthony Paul. "A study of factors affecting the regeneration of mineral exploration sites in the semi-arid and arid areas of South Western South Australia /." Title page, table of contents and abstract only, 2002. http://web4.library.adelaide.edu.au/theses/09ENV/09envr982.pdf.
Olén, Elisabeth. "Det kollektiva minnets avtryck av vännerna av det gamla Halmstad i gemenskapens årsböcker : Social gemenskap och kulturell samsyn i Föreningen Gamla Halmstad 1923-1941." Thesis, Högskolan i Halmstad, Akademin för lärande, humaniora och samhälle, 2021. http://urn.kb.se/resolve?urn=urn:nbn:se:hh:diva-43998.
Ali, ZAKI. "Självbalansering av MinSeg." Thesis, Högskolan i Gävle, Elektronik, 2019. http://urn.kb.se/resolve?urn=urn:nbn:se:hig:diva-29910.
Le, Guen Monique. "Les minéralisations Pb-Zn du Bathonien dans la région des Malines (Gard) : cadre géodynamique, caractérisation isotopique (Pb) et implications génétiques." Montpellier 2, 1989. http://www.theses.fr/1989MON20125.
Gomes, Abda Florência da Silva. "Avaliação do potencial poluidor de lamas radioativas como subsídio para ações futuras de mitigação." CNEN - Centro de Desenvolvimento da Tecnologia Nuclear, Belo Horizonte, 2009. http://www.bdtd.cdtn.br//tde_busca/arquivo.php?codArquivo=111.
No sudeste do Brasil, uma mina de urânio desativada gera água ácida em pH 2,7 contendo concentrações significativas de urânio e outros elementos como manganês, ferro, zinco e sulfato. A remoção destes contaminantes da água ácida até limites aceitáveis de descarte ocorre por precipitação dos elementos usando cal. O procedimento de precipitação tem sido adotado por mais de vinte anos e gera lama que é disposta na cava da mina desativada. O presente estudo consiste na caracterização de diferentes amostras desta lama, identificadas como Lama Antiga, Intermediária e Fresca, de acordo com o tempo de disposição, e na sua classificação, de acordo com procedimentos padrões de lixiviação para avaliar a resolubilização destes contaminantes e sua migração para o meio ambiente. Os resultados mostram que apesar de classificada como não perigosa, as amostras não são inertes, o que significa que requer um local específico para disposição em vez da mina desativada. Os íons fluoreto e sulfato são responsáveis pela instabilidade química das amostras. Outros elementos como ferro, zinco, manganês, urânio e alumínio foram também identificados em concentrações significativas. O urânio está presente na forma de óxidos amorfos, em concentrações de 0,24 a 0,64%. Os principais minerais presentes nas amostras, de acordo com difração de raios X, são Etringita (Ca6Al2(SO4)3(OH)12), Gipso (CaSO4.2H2O) e Calcita (CaCO3) e os constituintes minoritários são Fluorita (CaF2), Gibbsita (Al2O3.3H2O) e Portlandita (Ca(OH)2). O comportamento térmico da lama, determinado a partir da técnica de TGA/DTA, permitiu identificar o pico referente à Etringita e da decomposição de Calcita das Lamas Fresca, Intermediária e Antiga. Outra técnica utilizada na caracterização das lamas foi microssonda eletrônica (EDS) que permitiu a determinação de elementos como Fe, Al, C, O, S, terras raras, entre outros e sugeriu-se a associação de U ao Fe na Lama Antiga. Foram realizados testes de extração sequencial e verificou-se basicamente que o urânio encontra-se como íon trocável ou associado a carbonatos e óxidos de cálcio. Os elementos cálcio e sulfato foram removidos na fase solúvel e o fluoreto, em sua maioria, na fase de oxihidróxido de Fe e Mn amorfos podendo também ter sido solubilizado na forma de sais de sódio e potássio. Os elementos ferro, manganês, zinco e alumínio foram extraídos majoritariamente nas fases carbonatos e óxidos de cálcio e na fase de oxihidróxido de Fe e Mn amorfos. O procedimento de extração sequencial utilizado apresentou eficiência superior a 91% de extração para os elementos avaliados. A contagem alfa e beta total e de determinação de radionuclídeos encontram-se de acordo com o estabelecido por norma, mas por se tratar de área utilizada como depósito de estéreis ou rejeitos de mineração, devem ser avaliadas de forma específica. A caracterização química, mineralógica e a extração sequencial permitiram estabelecer semelhanças e diferenças entre as amostras e correlacioná-las com as diferentes condições ambientais a que são submetidas.
In southeastern Brazil, a closed uranium mine produces acid mine water at pH 2.7 which contains significant concentrations of uranium and other elements like manganese, sulfate, iron and zinc. The contaminants are removed from the acid water to acceptable limits through the precipitation of the elements with lime. This precipitation procedure has been adopted over fifteen years and the sludge generated has been disposed of into the mine opening. The present study consists of the characterization of different samples of the sludge, identified as Old, Intermediate and Fresh Sludge and their classification according to leaching standard procedures in order to assess the resolubilization of the contaminants and their migration to the environment. Despite being classified as non toxic, the samples are not inert, which means that a specific site other than the mine cave is required for their disposal. Fluoride and sulfate are responsible for the chemical instability of the samples. Other elements, like Fe, Zn, Mn, U and Al, are present in significant concentrations. Uranium is present as an amorphous oxide in concentrations from 0,24 to 0,64%. The main minerals in the samples, according to X-ray diffraction, are Ettringite (Ca6Al2(SO4)3(OH)12), Gypsum (CaSO4.2H2O) and Calcite (CaCO3) and their minor constituents are Fluorite (CaF2), Gibbsite (Al2O3.3H2O) and Portlandite (Ca(OH)2). Through TGA/DTA analysis, the peak of Ettringite and the decomposition of Calcite from Fresh, Intermediate and Old Sludges was identified. Another technique used to characterize the samples was the electron microprobe scanning with energy dispersive spectroscopy (EDS), which detected elements such as: Fe, Al, C, O, S, rare earths, among others and also suggested association with U and Fe in the Old Sludge. Sequential extraction tests were performed and, basically, it was verified that uranium occurs as exchangeable ion or associated with carbonates and calcium oxides. Calcium and sulphate were removed in the step corresponding to soluble phase and the majority of the fluoride was extracted in the step corresponding to iron and manganese amorphous oxi-hydroxide. The fluoride was also dissolved in the step corresponding to soluble phase and in the step corresponding to carbonate, suggesting that it derives from Na and K salts. The elements iron, manganese, zinc and aluminium were mostly extracted in the step corresponding to carbonates and calcium oxides and also in the iron and manganese amorphous oxi-hydroxide step. Sequential extraction procedure showed efficiency higher than 91%. The total alpha and beta values and radionuclides contents complies with the standard limits established by CNEN 3.01, but in case of great quantities of rocks or mining tailings that involves radioactive materials, the limits must be set according to specific assessment. Chemical and mineralogical characterization and sequential extraction made possible the assessment of similarities and differences between the samples, besides correlating them with the different environmental conditions that they are submitted.
Reys, Aurélien. "Ressources gemmifères et développement des territoires : la filière des pierres de couleur du Minas Gerais au Brésil." Sorbonne Paris Cité, 2015. http://www.theses.fr/2015USPCC034.
The aim of this thesis is to study the relationship between the abundance of natural wealth and the level of economic development of local population, as exemplified by colored gemstone resources and the Brazilian State of Minas Gerais. This space, which constitutes one of the greatest reserves of gemstones in the world, does not appear to profit fully from its resources because the areas in which mining operations take place are mainly characterizes by socio-economical indexes below the national average. Most local actors involved in the exploitation of these precious minerais must besides face significant difficulties, which have increased over the fast twenty years. The main reason for this decrease in production is however not, as it is often suggested, the subordination to foreign powers, nor the intensification of public authorities' battle against illegal mining activities. The decline of activities observed actually has its origin in the recent improvement of living conditions amongst local populations, which have therefore less inclined to choose physically tiring and badly paid dangerous activities than they were in the past. On the basis of this assessment, this thesis defends the idea according to which the specialization on certains territories in the field of mining extration is not a cause, but rather a consequence of poverty
Villagomez, Ojeda Carlos Javier. "Low temperature scanning tunneling microscopy studies of single molecules adsorbed on thin insulating films." Toulouse, INSA, 2008. http://www.theses.fr/2008ISAT0052.
The present work is concentrated on the study of two isomers of an organic molecule -methylterrylene- adsorbed on a thin insulating _lm (a NaCl bi or tri-layer) deposited on a metallic substrate -Cu(111)-, by Scanning Tunneling Microscopy and Spectroscopy (STM and STS). Most STM studies of adsorbed atoms and molecules up to now have been performed on metallic or semiconducting surfaces. In this situation, the object is strongly electronically coupled to the substrate. The atomic or molecular levels are then shifted and broadened in energy, with the consequence that some of the intrinsic properties of the object are lost, to a more or less large extend. It has been shown recently that interposing between this object and the substrate an insulating leads to an efficient decoupling which allows to recover some of these properties. This decoupling effect of the insulating layer is at the center of the work reported here. Experiments where the molecules are directly adsorbed on the metal are compared with experiments where the molecule is decoupled from the Cu(111) surface by a NaCl bi-layer. The interpretation of these experimental results is supported and extended by current and image calculations with the Elastic Scattering Quantum Chemistry method where the structure of the Metal-insulating layer-molecule-metal junction is described at the atomic level. In the framework of molecular electronics, where the objective is to design and use molecules as electronic devices, understanding and controlling the coupling of a molecule to its environment is a central issue
Anderson, Jonathan D. "Impacts of amending bauxite residue sands with residue fines for the establishment of vegetation on residue disposal areas /." Murdoch University Digital Theses Program, 2009. http://wwwlib.murdoch.edu.au/adt/browse/view/adt-MU20090831.155453.
Lacave, Christophe. "Fluides autour d'obstacles minces." Phd thesis, Université Claude Bernard - Lyon I, 2008. http://tel.archives-ouvertes.fr/tel-00345665.
Zorgati, Hamdi. "Modélisation de Films Minces." Phd thesis, Université Pierre et Marie Curie - Paris VI, 2004. http://tel.archives-ouvertes.fr/tel-00008875.
Karlsson, Anton, and Marcus Larsson. "Patienters minnen från intensivvården." Thesis, Örebro universitet, Institutionen för hälsovetenskap och medicin, 2012. http://urn.kb.se/resolve?urn=urn:nbn:se:oru:diva-22488.
Fogelberg, Jeanette, and Elin Gustafsson. "Mingel : Fik i butik." Thesis, Högskolan i Borås, Institutionen Textilhögskolan, 2009. http://urn.kb.se/resolve?urn=urn:nbn:se:hb:diva-19604.
Program: Butikschefsutbildningen
Li, Mengxing. "Films minces d'hydrogels stimulables." Thesis, Paris 6, 2014. http://www.theses.fr/2014PA066268/document.
Thin films of hydrogels we study are chemical polymer networks covalently grafted on solid substrates. These versatile coatings allow the control of various interfacial properties such as responsive properties, wetting or mechanical properties. Here, thin films of stimuli-responsive hydrogels (with temperature, light or electric field) are the point of interest. The surface-attached gel films are synthesized by following a straightforward strategy based on thiol-ene click chemistry. The formation of the films is achieved by adding bifunctional thiol molecules as cross-linkers to the ene-reactive polymers on thiol-modified surfaces. This strategy allows us to obtain hydrogel films with a wide range of thickness and with the desired properties. We study the structure of surface-attached poly(N-isopropylacrylamide) gel films which show thermo-responsive properties. We determine the effect of confinement and constraints due to the surface-attachment on the swelling/collapse phase transition of hydrogels with two approaches: the one-dimension swelling normal to the surface using ellipsometry and neutron reflectivity and the in-plane observation of the free surface of the gel using AFM. New and complex hydrogel films are also developed by targeting the architecture of the polymer networks. Inspired from macroscopic hydrogels architecture, we design various architectures: multilayer gel films, interpenetrating networks (IPN) gel films and hybrid gel films
Soueid, Salwa. "Micromagnétismes des films minces." Thesis, Paris Est, 2015. http://www.theses.fr/2015PESC1037/document.
The ferromagnetic materials possess the magnetic property of future, that is to magnetize, when they are in the presence of a magnetic field and to keep a part of their magnetizing when the field is deleted. It is for that reason, these materials became of use in numerous industrial applications (...)
Pestilho, Andre Luiz Silva 1985. "Sistemática de isótopos estáveis aplicada à caracterização da evolução dos paleo-sistemas hidrotermais associados aos depósitos cupríferos Alvo Bacada e Alvo Castanha, Província Mineral do Carajás, PA." [s.n.], 2011. http://repositorio.unicamp.br/jspui/handle/REPOSIP/286851.
Dissertação (mestrado) - Universidade Estadual de Campinas, Instituto de Geociências
Made available in DSpace on 2018-08-19T17:30:40Z (GMT). No. of bitstreams: 1 Pestilho_AndreLuizSilva_M.pdf: 3902456 bytes, checksum: 1316b1f2f664966b7e4c2d9a46a528d2 (MD5) Previous issue date: 2011
Resumo: Localizados na porção norte da Província Mineral de Carajás, a uma distância de cerca de 8 km do depósito de óxido de ferro-cobre-ouro de Sossego, estão os depósitos de cobre Alvo Bacaba e Alvo Castanha. Esses depósitos encontram-se ao longo de uma zona de cizalhamento regional de cerca de 60 km de extensão, no limite entre o Supergrupo Itacaúnas e seu embasamento representados principalmente pelos migmatitos do complexo Xingu. O Alvo Bacaba é hospedado pelo granito Serra Dourada e pelo tonalito Bacaba, enquanto o Alvo Castanha é Ambos os depósitos exibem amplas zonas de alteração hidrotermal que compreendem quase que respectivamente a albitização, a escapolitização, a formação de óxidos de ferro, a alteração sódico-cálcica, a alteração potássica, a formação de turmalina, a sericitização, a cloritização, a epidotização e a carbonatização, embora estes depósitos mostrem diferenças, como a alteração sódico-cálcica que apesar de ser bem desenvolvida no Alvo Castanha, é quase inexistente no Alvo Bacaba, onde apenas ocorre como alteração nos gabros. Também o Alvo Bacaba possui uma associação de minerais distintas, composta por calcopirita±pirita±bornita, enquanto o Alvo Castanha exibe a associação calcopirita±pirrotita±pirita. Informações sobre evolução paragenética e dados de isótopos estáveis indicam que os depósitos Alvo Bacaba e Alvo Castanha evoluíram durante progressivo resfriamento. Entretanto, esta redução com relação à evolução paragenética foi maior no Alvo Bacaba do que no Alvo Castanha, e a fugacidade de oxigênio foi mantida alta no Alvo Bacaba. A temperatura de deposição do minério estimada para o Alvo Bacaba pode ter ocorrido entre 220 °C e 410 °C, enquanto no Alvo Castanha esta teria ocorrido entre 350 °C e 420 °C. A evolução isotópica do Alvo Bacaba é similar àquela caracterizada para o depósito de Sossego, com uma redução acentuada da temperatura acompanhada por um decréscimo no valor de ?18O e acréscimo no valor de ?D e evidências de misturas de fluido juvenil e de fonte não magmática. Já para o Alvo Castanha, as composições isotópicas dos fluidos hidrotermais indicam a predominância de uma fonte magmática. Estas características e similaridades com aquelas de Sossego podem apontar para uma contribuição de águas magmáticas e oceânicas no sistema hidrotermal que originou todos estes depósitos
Abstract: The Alvo Bacaba and Alvo Castanha copper deposits are located at the northern part of the Carajás Mineral Province, at a distant radius of about 8 km from the Sossego iron oxide-copper-gold deposit. These deposits occur along a regional shear zone 60 km wide, in the limit between the Itacaiúnas Supergroup and its basement represented mainly by migmatites of the Xingu Complex. Both deposits exhibits widespread hydrothermal alteration zones comprising albitization, scapolitization, iron oxide formation, sodic-calcic alteration, potassic alteration, tourmaline formation, sericitization, epidotization and carbonatization, although these two deposits show differences like sodic-calcic alteration, which is well developed in Alvo Castanha, but it is almost inexistant in Alvo Bacaba, being present only in its altered gabbros. Also the Alvo Bacaba shows ore minerals association essencialy composed by chalcopyrite±pyrite±bornite while the Alvo Castanha shows the association of chalcopyrite±pyrrhotite±pyrite. Paragenesis and stable isotope data indicate that the Alvo Bacaba and Alvo Castanha deposits have evolved with temperature decrease. However, the temperature drop in relation to the hydrothermal alteration succession was greater in Alvo Bacaba than the Alvo Castanha, and the oxygen fugacity was kept higher at Alvo Bacaba. The estimated temperature for ore deposition in the Alvo Bacaba was between 220 °C and 410 °C, while the Alvo Castanha it would have occurred between 350 °C and 420 °C. The isotopic evolution of the Alvo Bacaba is similar to that characterized for the Sossego deposit, with a steep temperature reduction accompanied by decrease of ?18O and increase of ?D values and fluid mixing evidences. In the Alvo Castanha, isotopic compositions of the hydrothermal fluids indicate predominance of magmatic sources. These characteristics and its similarities with those of the Sossego deposit could point to a contribution of magmatic and ocean waters in the hydrothermal system that originated all deposits
Mestrado
Geologia e Recursos Naturais
Mestre em Geociências
Rodríguez, Nuño de la Rosa Virginia. "Sobre el traspaso de competencias del OSINERGMIN al OEFA: ¿Miopía política, captura del Estado o juego electoral?" Politai, 2010. http://repositorio.pucp.edu.pe/index/handle/123456789/91898.
Paljic, Alexis. "Interaction en environnements immersifs et retours d'effort passifs." Paris 6, 2004. https://hal-mines-paristech.archives-ouvertes.fr/tel-01479203.
Ladevie, Bruno. "Mise au point de dispositifs de caracterisation thermophysique de materiaux isolants solides ou pateux - extensions aux fluides cisailles." Paris, ENSAM, 1998. https://hal-mines-albi.archives-ouvertes.fr/tel-01857494.
Felsch, Junior Walter Schimidt. "Análise do desempenho dos operadores de equipamentos de mina e simulação de cenários futuros de lavra : estudo de caso - Mina Casa de Pedra – Congonhas, MG." reponame:Repositório Institucional da UFOP, 2014. http://www.repositorio.ufop.br/handle/123456789/4033.
Submitted by Oliveira Flávia (flavia@sisbin.ufop.br) on 2014-11-10T18:30:16Z No. of bitstreams: 2 license_rdf: 22190 bytes, checksum: 19e8a2b57ef43c09f4d7071d2153c97d (MD5) DISSERTAÇÃO_AnáliseDesempenhoOperadores.pdf: 2469343 bytes, checksum: 472f4fccfe3c4a2955422625ecbf6734 (MD5)
Approved for entry into archive by Gracilene Carvalho (gracilene@sisbin.ufop.br) on 2014-11-24T17:50:49Z (GMT) No. of bitstreams: 2 license_rdf: 22190 bytes, checksum: 19e8a2b57ef43c09f4d7071d2153c97d (MD5) DISSERTAÇÃO_AnáliseDesempenhoOperadores.pdf: 2469343 bytes, checksum: 472f4fccfe3c4a2955422625ecbf6734 (MD5)
Made available in DSpace on 2014-11-24T17:50:49Z (GMT). No. of bitstreams: 2 license_rdf: 22190 bytes, checksum: 19e8a2b57ef43c09f4d7071d2153c97d (MD5) DISSERTAÇÃO_AnáliseDesempenhoOperadores.pdf: 2469343 bytes, checksum: 472f4fccfe3c4a2955422625ecbf6734 (MD5) Previous issue date: 2014
O trabalho tem como foco principal o impacto na lavra da Mina Casa de Pedra, analisando o desempenho dos operadores dos equipamentos de carga e transporte. A mineração Casa de Pedra, pertencente à Companhia Siderúrgica Nacional (CSN), localizada na cidade de Congonhas, Estado de Minas Gerais, faz extração de minério de ferro através da lavra convencional utilizando equipamentos de carga e transporte de grande porte. A mina é composta por quatro regiões de lavra: Corpo principal e Corpo Oeste (método de lavra em cava); Corpo Norte e Serra do Mascate (método de lavra em encosta). Os caminhões fora de estrada possuem várias alternativas de perfis de transporte, o que influencia diretamente em seu desempenho. Os estudos foram desenvolvidos a partir da escolha de indicadores de desempenho chave para os operadores dos equipamentos de mina, mensurados através do sistema de despacho eletrônico utilizado da mina, com o intuito de classificar os operadores de acordo com práticas operacionais individuais. O objetivo do trabalho é obter maior aderência ao plano mensal de lavra e aumentar a produtividade efetiva dos operadores, através da identificação de atividades detectadas como baixo rendimento, em comparação com as melhores praticas operacionais das equipes e criação de treinamentos específicos para cada indicador previsto. Os resultados do trabalho foram simulados utilizando diferentes cenários de operação, com tempos fixos variados (tempos de manobra no carregamento e basculamento, tempo de carregamento e tempo de basculamento) com o intuito de mensurar os ganhos operacionais através dos indicadores produtivos. A empresa funciona em regime integral, com turnos de 6 horas de duração e possui 270 operadores divididos em cinco equipes de produção. ______________________________________________________________________
ABSTRACT: The dissertation has a main focus in mining the impact of the “Casa de Pedra” mine, analyzing the performance of the operators of mining equipment. The "Casa de Pedra" iron ore mine, a division of the CSN(*) Group, is located in the city of Congonhas, in the Brazilian state of Minas Gerais. The ore exploitation is made conventional ally trucks and front loaders. The mine is composed for four regions of mine: Main body and West Body (open pit mining in cave); North Body and Serra do Mascate (open pit mining in hillside). The trucks of the mine have some alternatives of transport profiles, influencing directly in their performance. These studies were developed to evaluate the performance of the operators of mining equipments. In these studies was used electronic dispatch system of the mine in order to sort the operators according to individual operating practices. The objective of this dissertation is to obtain better adherence to the monthly plan of mining and improvement in effective productivity of operators. The activities that detected as overhead, compared to the best practices of operating teams and creating specific training for the indicators. The results were simulated using different operating scenarios, with cycle times varied (spot on the load and dump times, loading time and dumping time) in order to measure the operational gains through the productivity indicators. The mine regime of production is 24 hours a day with work shifts of 6 hours each and has 270 operators divided into five production teams.
Tängermyr, Anna-Marie. "Inkodningens påverkan på minnet för mekaniska funktioner." Thesis, University of Skövde, School of Humanities and Informatics, 2004. http://urn.kb.se/resolve?urn=urn:nbn:se:his:diva-859.
Människan minns händelser och rörelser som hon själv genomfört bättre än de hon fått berättade för sig. Minnet för händelser och rörelser behandlas i det episodiska minnet. Multimodal memory theory är en teori om det episodiska minnet vilket bland annat behandlar förkunskapernas och modaliteternas betydelse för minneskapaciteten. Då människan genomför något används den motoriska modaliteten och då hon får höra något berättas används den verbala modaliteten. Det som har undersökts är om minnet och förståelsen för komplexa och tekniska lösningar påverkas av vilket modalitet som används vid inkodningen. Undersökningen visade inte någon skillnad på förståelse eller minneskapacitet för komplexa och tekniska lösningar, beroende av vilket modalitet som används vid inkodningen. En anledning till att undersökningen inte visade någon skillnad kan vara att mätredskapet var för trubbigt. Det är även möjligt att resultatet hade blivit ett annat om utformningen på experimentet hade varit annorlunda.
Grec, Bérénice. "Fluides complexes en films minces." Phd thesis, Ecole Centrale de Lyon, 2008. http://tel.archives-ouvertes.fr/tel-00351462.
* le caractère complexe des fluides eux-mêmes, comme pour des fluides non-newtoniens ;
* l'hétérogénéité de l'écoulement, dans le cas de mélanges de fluides par exemple.
Il est important d'analyser comment ces modèles peuvent être simplifiés dans le cas de domaines minces, et d'étudier rigoureusement les modèles approchés.
Dans une première partie, des écoulements de fluides non newtoniens visco-élastiques représentés par une loi de comportement de type Oldroyd-B couplée aux équations de Navier-Stokes sont étudiés. Dans le cas de géométries minces, un modèle approché a été proposé. On justifie la validité de cette approximation ; la démonstration repose sur des estimations et des résultats de régularité fins.
Dans une deuxième partie, on considère un modèle d'écoulement piezovisqueux utilisé en lubrification hydrodynamique. Ce modèle fait aussi intervenir la déformation élastohydrodynamique du domaine (déformation du type Hertz), et l'aspect diphasique de la cavitation, qui est décrit par le modèle d'Elrod-Adams (en pression-saturation). On montre l'existence d'une solution à ce problème pour des lois pression-viscosité réalistes.
Dans une troisième partie, on introduit un modèle diphasique à interface diffuse, permettant de rendre compte de phénomènes plus fins tels que les gouttes. Pour cela, un paramètre d'ordre est introduit (fraction volumique d'une phase dans le mélange), gouverné par le modèle de Cahn-Hilliard. Un système approché est obtenu de manière heuristique pour un domaine de faible épaisseur. On étudie les propriétés mathématiques de ce système, et on montre un résultat d'existence, avec prise en compte ou non de la tension de surface.
Dans la dernière partie, un schéma numérique est mis en place pour simuler le modèle décrit précédemment d'écoulements diphasiques en domaines minces. Il permet de prendre en compte différents phénomènes physiques, comme de grandes variations de la viscosité ou la présence de recirculations à l'intérieur d'une goutte, ainsi que de simuler des mélanges dans le cadre d'écoulements lubrifiés.
Vandenbrouck, François. "Films minces de cristaux liquides." Phd thesis, Université Pierre et Marie Curie - Paris VI, 2001. http://tel.archives-ouvertes.fr/tel-00001559.
Rong, Guoxin, Hongyun Wang, and Bjӧrn M. Reinhard. "Insights from a nanoparticle minuet." Universitätsbibliothek Leipzig, 2015. http://nbn-resolving.de/urn:nbn:de:bsz:15-qucosa-184924.
Dorion, Jean-François. "La corrosion du soutènement minier." Thesis, Université Laval, 2013. http://www.theses.ulaval.ca/2013/30012/30012.pdf.
Dalunde, Tilda. "Minnen från en parallell framtid." Thesis, Konstfack, Ädellab/Metallformgivning, 2014. http://urn.kb.se/resolve?urn=urn:nbn:se:konstfack:diva-4695.
We live in a fragile everyday. We make it even more fragile by the way we live it. There is no point in saying it with words any more, I've already tried that so many times that people have stopped listening. Maybe objects are a better way to start a conversation. In this project, that consists of this thesis and the physical body of work "Memories from a parallel future", I've been investigating what happens to us when the everyday falls apart and chaos erupts. With a starting point in the climate-crisis of the year 536, that led to the death of almost half of the Norse population, I've been speculating what would have happened today. Or maybe that it is actually happening today. Depletion of resources always results in violence. We know this, but still we keep nibbling at the earth, a little chunk at a time. What do we plan to do when there is nothing left?
Bilder av verk av konstnärerna Iain Baxter&, Naoko Ito och Luiana Rondolini har tagits bort av upphovsrättsliga skäl. Titlarna på verken står dock kvar.
Reimer, Robert P. "Preaching to career-minded people." Online full text .pdf document, available to Fuller patrons only, 2004. http://www.tren.com.
Ekström, Matilda. "Naturen-Minnen från en kvällsvandring." Thesis, Högskolan i Borås, Institutionen Textilhögskolan, 2012. http://urn.kb.se/resolve?urn=urn:nbn:se:hb:diva-16398.
Program: Textildesignutbildningen
Rosén, Caroline, and Thea Trosell. "När minnet sviktar : - En litteraturöversikt." Thesis, Högskolan i Jönköping, Hälsohögskolan, 2018. http://urn.kb.se/resolve?urn=urn:nbn:se:hj:diva-39590.
Ouattara, Abdoulaye. "Le développement minier en Afrique." Paris 9, 1990. https://portail.bu.dauphine.fr/fileviewer/index.php?doc=1990PA090043.
CHEIKH, LOTFI. "Flambage dynamique des coques minces." Paris 6, 1995. http://www.theses.fr/1995PA066568.
Coleman, Eoin. "Aspects logiques des groupes minces." Caen, 2009. http://www.theses.fr/2009CAEN2027.
The results presented in the six chapters of this work concern slenderness from the perspective of non-elementary classification theory. In the early chapters, it is shown:(1) the classes of slender and cotorsion-free abelian groups are axiomatizable in the infinitary logics L∞ w1 and L∞ w ; (2) the Baer-Specker group ℤ"exposant"w is not L∞ w1(t)-equivalent to a slender group; (3) the cotorsion-free groups constitute an abstract elementary class (AEC); (4) the group ℤ"exposant"w is never filtrable by cotorsion-free groups. Non-structure results are presented in the fourth chapter: it is proved that there exist many non-isomorphic slender groups of cardinality À1 which are L∞ w1-equivalent, and that there exists a large family F of uncountable pure subgroups of the Baer-Specker group that are strongly nonisomorphic and almost disjoint in the sense that for any pair A, B € F, if G is embedded in A and in B, then G is free. The fifth and sixth chapters treat self-slenderness, strong slenderness and co-smallness. A strong black box argument is used to demonstrate the existence of non-slender self-slender groups in arbitrarily large cardinalities; large cardinal axioms are applied to resolve existence questions concerning cosmall groups
Wik, Anders. "Användargränssnittets positiva effekter på minnet." Thesis, Malmö högskola, Fakulteten för kultur och samhälle (KS), 2010. http://urn.kb.se/resolve?urn=urn:nbn:se:mau:diva-22859.
Chacouche, Khaled. "Structures minces férromagnétiques et férroélectriques." Thesis, Paris Est, 2017. http://www.theses.fr/2017PESC1053/document.
This thesis deals with partial differential equations coming from mathematical physics. Particularly, starting from 3D models for ferromagnetism and ferroelectricity, we derive 1D and 2D models via asymptotic processes based on dimensional reduction methods. The 3D model for ferromagnetism was proposed by W.F. Brown in the 40s and it is based on a system introduced by L.D. Landau and E.M. Lifschitz in 1935. About the ferroelectric model, we refer tothe papers of P. Chandra and P.B. Littlewood, W. Zhang and K. Bhattacharya and to the book of T. Mitsui, I. Taksuzaki, and E. Nakamura.This thesis based on three works:At the beginning, we consider micromagnetic energy, with some degenerating coefficients, in a thin wire. After showing the existence of minimizers, we identify the limit energy as the section of the wire vanishes.In the second part, we study the asymptotic behavior of the solutions of a time dependent micromagnetic problem in a multi-structure consisting of two joined thin wires. We assume that the volumes of the two wires vanish with same rate. We obtain two 1D limit problems coupled by a junction condition on the magnetization. The limit problem remains non-convex, but now it becomes completely local.In the last chapter, starting from a non-convex and nonlocal 3D variational model for the electric polarization in a ferroelectric material, and using an asymptotic process based on dimensional reduction, we analyze junction phenomena for two orthogonal joined ferroelectric thin films. We obtain three different 2D-variational models for joined thin films, depending on how the reduction happens. We note that, a memory effect of the reduction process appears, and it depends on the competition of the relative thickness of the two films: The guide parameter is the limit of the ratio between these two small thickness
Matos, José Henrique da Silva Nogueira de 1987. "Evolução metalogenética da mina de cobre de Pedra Verde (CE)." [s.n.], 2012. http://repositorio.unicamp.br/jspui/handle/REPOSIP/287647.
Dissertação (mestrado) - Universidade Estadual de Campinas, Istituto de Geociências
Made available in DSpace on 2018-08-21T19:19:43Z (GMT). No. of bitstreams: 1 Matos_JoseHenriquedaSilvaNogueirade_M.pdf: 14049686 bytes, checksum: 25d55717e4c109fa4bd180699977bb8a (MD5) Previous issue date: 2012
Resumo: A mina de cobre de Pedra Verde situa-se no município de Viçosa do Ceará, NW do Ceará. O depósito é hospedado por rochas supracrustais neoproterozóicas do Grupo Martinópole, Domínio Médio Coreaú. O embasamento é constituído por gnaisses-migmatíticos TTG paleoproterozóico (2,35 Ga). Quartzitos com intercalações de xistos, filitos, metassiltitos e meta-argilitos compõem a sequência supracrustal. ...Observação: O resumo, na íntegra, poderá ser visualizado no texto completo da tese digital
Abstract: The Pedra Verde Copper Mine, located at Viçosa do Ceará (CE), contains reserves of 44.932.644 t with 0.9 wt.% of Cu (418.726 tonn of Cu), with silver as by-product. The deposit is hosted by Neoproterozoic supracrustal rocks of the Martinopole Group, in the Médio Coreau Domain. Gneisses-migmatites TTG units compound the Paleoproterozoic basement (2.35 Ga) in the area. ...Note: The complete abstract is available with the full electronic document
Mestrado
Geologia e Recursos Naturais
Mestre em Geociências
Rodríguez, Saucedo María Betzabé. "Léxico de la minería : estudio semántico-lexicológico de la Unidad Minera de Uchucchacua." Bachelor's thesis, Universidad Nacional Mayor de San Marcos, 2004. https://hdl.handle.net/20.500.12672/982.
Tesis
Hezard, Teddy. "Développement d'un capteur pour mesurer en continu et in situ les teneurs en fer (III) et fer (II) ainsi que d'autres métaux dans les eaux d'exhaure des anciens sites miniers." Châtenay-Malabry, Ecole centrale de Paris, 2005. http://www.theses.fr/2005ECAP0988.
This thesis deals with mining effluents monitoring. It has been cofinanced by the Office of Geological and Mining Research and the Ministry of Research within the scope of the Fer_On_Line project, resulting from the network of Research and Technological Innovation on Water. The purpose of this project was to develop an electrochemical sensor for the continuous and in situ determination of iron(II) and iron(III) levels, as well as other elements, in acid mine drainage waters from abandoned mining sites and to transmit them by telemetry. The follow-up of these elements "markers" informs about the overall evolution of the mining effluents from a given site. It has been shown that the concentration measurement of iron [iron(I) and/or iron(III)] in the mining effluents from two abandoned sites (Chessy and Carnoulès) was possible by amperometric detection, as well as copper(II) measurement [Chessy]. Another species, such as arsenic(III) [Carnoulès], could be detected but not quantified. An electrochemical cell using impinging jet flow adapted for in situ measurements of acid mine drainage waters has been designed and carried out, as well as associated electronics. The prototype composed of the cell including the amperometric sensor and the measurement instrument has been established on the site of Carnoulès where continuous and in situ measurements of iron(II) level has been carried out during 7 days. The results showed not only a very good agreement between the values determined by amperometry and those obtained by colorimetry but also a good life time of the amperometric sensor. Thus, the continuation of the study is very promising
Oliveira, Alexandre Pereira de. "Estimativa simultânea de parâmetros hidráulicos e de transporte em estéreis de mineração de urânio." [s.n.], 2010. http://repositorio.unicamp.br/jspui/handle/REPOSIP/265444.
Tese (doutorado) - Universidade Estadual de Campinas, Faculdade de Engenharia Mecânica
Made available in DSpace on 2018-08-16T12:44:27Z (GMT). No. of bitstreams: 1 Oliveira_AlexandrePereirade_D.pdf: 5076022 bytes, checksum: 0be1cd3a8682d6b21786e0251b3086f7 (MD5) Previous issue date: 2010
Resumo: Este trabalho tem por objetivo a estimativa simultânea dos parâmetros hidráulicos e de transporte relacionados ao material existente em uma das pilhas de estéreis de mineração de urânio (Pilha de Estéreis 4) da Unidade Caldas das Indústrias Nucleares do Brasil (INB Caldas). Antes de realizar as estimativas, foi necessário conhecer as espécies químicas que são solubilizadas desse material pela ação das intempéries climáticas, sabendo-se que este material é rico em pirita (sulfeto de ferro, FeS2). Para isso foi montado um aparato experimental chamado de Experimento de Drenagem Ácida, no qual o processo de oxidação da pirita foi acompanhado em ambiente controlado. Foram feitas as determinações das concentrações de diversos elementos químicos estáveis e radioativos tanto no líquido ao longo dos testes, quanto no material sólido antes e depois dos testes. Foram calculadas a massa (ou atividade) total solubilizada, a taxa de solubilização e o percentual de solubilização. Os resultados mostraram quais espécies são mais facilmente solubilizadas e quais devem ser acompanhadas nos estudos de contaminação. As estimativas dos parâmetros hidráulicos e de transporte foram obtidas através da associação de um Experimento de Transporte de Solutos ao código computacional Hydrus-1D. Além da solução numérica do modelo adequado ao experimento, este código possui implementada a Técnica de Levenberg-Marquardt para estimativa de parâmetros. Foram estimados o conteúdo de água de saturação qs, a condutividade hidráulica de saturação Ks e o coeficiente de dispersão D. Os resultados mostraram que o parâmetro D é mais bem estimado, seguido por qs e Ks
Abstract: The present work aims to simultaneously estimate the hydraulic and transport parameters related to the material of one of the waste rock piles (Waste Rock Pile 4) from the Poços de Caldas uranium mining and milling facility. Before performing the estimation, it was necessary to study the chemical species that are dissolved from this material by the climate action, knowing a priori that the material is rich in pyrite (iron sulfide, FeS2). In order to follow the pyrite oxidation process within a controlled environment, an experimental apparatus called Acid Drainage Experiment was assembled. During tests, concentrations of various stable and radioactive chemical elements were determined in the liquid as well in the solid material before and after the tests. In addition, the total mass (or activity) dissolved, the rate of dissolution and the percentage of dissolution were calculated. Results showed which species are more easily dissolved and those that should be followed in contamination studies. The simultaneous estimation of the hydraulic and transport parameters was accomplished through the so called Solute Transport Experiment combined with the software Hydrus-1D. This software provides the numerical solution of an adequate model, using the Levenberg-Marquardt Technique for parameter estimation. The saturation water content qs, the saturation hydraulic conductivity Ks and the dispersion coefficient D were estimated. Results showed that the parameter D was well estimated, followed by qs and Ks
Doutorado
Termica e Fluidos
Doutor em Engenharia Mecânica
Palacio, Alvarado Bienvenido. "Caracterização petrografica e geoquimica das rochas encaixantes e dos minerios auriferos da Mina de Morro Velho (Mina Velha) - distrito de Nova Lima - MG." [s.n.], 2003. http://repositorio.unicamp.br/jspui/handle/REPOSIP/287433.
Dissertação (mestrado) - Universidade Estadual de Campinas, Instituto de Geociencias
Made available in DSpace on 2018-08-03T16:49:27Z (GMT). No. of bitstreams: 1 PalacioAlvarado_Bienvenido_M.pdf: 6229913 bytes, checksum: 47f9381b312cf6ab8287de30633c8b95 (MD5) Previous issue date: 2003
Resumo: A Mina de Morro Velho localiza-se na parte noroeste do Quadrilátero Ferrífero - Minas Gerais, Brasil, e encontra-se encaixada em xistos verdes do Grupo Nova Lima, uma, porção inferior do Supergrupo Rio das Velhas, de idade arqueana. A Mina é dividida em dois blocos, Mina Velha (até 518 metros) e Mina Grande (518 a 2.453 metros). O primeiro bloco, Mina Velha, é o objeto desta pesquisa, que teve como meta principal a determinação das características petrográficas e geoquímicas das rochas encaixantes e dos minérios, visando estabelecer critérios e relações de temporaneidade entre estes elementos. A principal unidade hospedeira de ouro, no Distrito de Nova Uma, é a Lapa Seca, termo utilizado pelos mineiros para designar uma rocha maciça ou finamente bandeada de cor bege a cinza, de textura muito fina e composta por ankerita, dolomita, quartzo e plagioclásio. A sucessão litológica encontrada neste estudo consiste de um conjunto de rochas metasedimentares, representado por diferentes variedades de filitos, meta-litoarenitos e meta-conglomerados. Estes últimos, relacionam-se diretamente às mineralizações auríferas. Eles correspondem ao protólito da chamada Lapa Seca. No contexto da Mina Velha, esses meta-conglomerados são constituídos de fragmentos de rochas ígneas, intensamente deformadas, achatadas e estiradas. Eles também sofrem alterações hidrotermais e essas transformações dificultam o reconhecimento das características composicionais e texturais originais. Não obstante, a conservação parcial de algumas características, permitiu determinar uma origem principalmente plutônica para estes fragmentos e uma composição de intermediaria a ultramáfica. Fora da área de estudo, mas pertencendo à mesma seqüência estratigráfica das rochas da Mina de Morro Velho, encontrou-se meta-conglomerados, menos deformados e alterados, que são constituídos de fragmentos de origem vulcânica, cuja composição uniforme é andesito-basáltica. A mineralização aurífera associa-se a corpos sulfetados, constituídos, principalmente, por pirrotita, pirita e arsenopirita, com calcopirita subordinada e ocorrendo em zonas de cisalhamento dúcteis, paralelas a sub-paralelas ao acamamento original. Os corpos sulfetados têm ganga predominantemente carbonática e os veios de quartzo são comuns nessas zonas
Abstract: Morro Velho mine is located at Northwestern part of Quadrilátero Ferrífero, Minas Gerais State, Brazil. Mineralization is hosted in green-schists of Nova Uma Group, low portion of the Rio das Velhas Supergroup of Archean age. The mine is divided in two blocks according to their deep: the Mina Velha block (O - 518 m) and the Mina Grande block (518 - 2453 m). This study focused on Mina Velha block and the main objectives were the characterization of hosted rocks and mineralization since petrology and geochemistry point of view, concerning on temporal criteria and relations between these elements.The main unit hosted of gold in Nova Uma district is Lapa Seca, term used by the miners. This term represents a massive or fine-banded rock, beige to gray color, with fine texture and mineralogical composition of ankerite, dolomite, quartz and plagioclase. Meta-sedimentary rocks, as several phyllites, meta-sandstone and meta-conglomerates compose the litho-stratigraphic column defined by this study. The meta-conglomerates are directly related to gold mineralization and corresponds to the "Lapa Seca" protholith. Highly deformed fragments of igneous rocks, frequently flatted and stretched, compose those meta-conglomerates in the mine context. These rocks also were hydrothermally altered and those transformations have hampered the characterization of original textures and compositions. In spite of these problems, the partial preservation of some characteristics allows suggesting for a plutonic origin and a composition intermediate to ultramáfica for the fragments. Outside the mine, some meta-conglomerates of the same stratigraphic sequence of Morro Velho rocks are less deformed and altered and the fragments are of volcanic origin and uniform andesite - basalt composition. The gold mineralization is associated to sulphide bodies, with pyrrotite, pyrite and arsenopyrite as major minerals and chalcopyrite subordinated. The main zonas of occurrence are ductile edge faults subconcordant or concordant with the hosted rocks primary structures. The gangue of the sulphide bodies is mainly carbonatic and quartz veins are very commons in those zones
Mestrado
Metalogenese
Mestre em Geociências
Sandoval, Miranda Claudio Andrés. "Herramienta para evaluar recursos minerales incrementales, mina El Peñón." Tesis, Universidad de Chile, 2018. http://repositorio.uchile.cl/handle/2250/168497.
El presente trabajo, que presenta valores factorizados para mantener la confidencialidad de los mismos, busca determinar la factibilidad de la inclusión de minerales incrementales (marginales) mediante una evaluación económica iterativa que procure maximizar el valor del negocio y recalcular la ley de corte óptima de la mina El Peñón, propiedad de Yamana Gold Inc. y operada por Minera Meridian Ltda. Actualmente, como caso base, la mina el Peñón presenta 40 sectores con reservas económicamente explotables, a una ley de corte equivalente de 4.0 g/ton, con un costo mina fijo de 109.5 US$/ton de mineral y un costo planta fijo de 34.23 US$/ton procesada. Respecto al análisis de marginalidad se considera una ley de corte marginal de 1.9 g/ton. En este análisis, se determinó mediante el estudio de 10 sectores representativos de la mina que la ley de corte óptima corresponde en una instancia primaria a 4.5 g/ton según la metodología de K. Lane y con un incremento a 5.4 g/ton afinando el cálculo mediante la utilización de flujos de caja iterativos obteniendo un aumento en el VAN de 15 MUS$ respecto al caso base actual. Se realiza además un análisis de marginalidad que determina que la ley de corte marginal corresponde a 2.4 g/ton e incrementa el VAN anterior en 43 MUS$ con lo que se demuestra que la inclusión de los minerales incrementales logra agregarle valor al negocio minero. Adicionalmente, se genera un resumen de costos y mineralogías que permite generar costos mina y planta diferenciados por sector y así poder realizar una evaluación económica más precisa según las características intrínsecas de cada sector. Por último, se entrega una herramienta creada en Visual Basic Applications de Office Excel que permite generar estos cálculos de manera automática, utilizando parámetros modificables en el tiempo y analizando múltiples casos posibles de manera simultánea al agregar la iteración dentro del estudio.
Budde, Maximilian [Verfasser], Stefan [Akademischer Betreuer] Minner, and Martin [Akademischer Betreuer] Bichler. "Procurement Auctions in Logistics and Transportation / Maximilian Budde. Gutachter: Stefan Minner ; Martin Bichler. Betreuer: Stefan Minner." München : Universitätsbibliothek der TU München, 2015. http://d-nb.info/1069199648/34.
Bustamante, Orellana Carmen Gloria. "Innovación en el cálculo de la densidad de fracturas y su utilidad en el modelo estructural de la mina Los Pelambres." Tesis, Universidad de Chile, 2015. http://repositorio.uchile.cl/handle/2250/137541.
En la presente memoria se explora la manera de relacionar complementariamente los modelos geológico-estructurales y modelos geotécnicos para una mina de rajo abierto, generados a partir de una misma base de datos. La base de datos disponible contiene la ubicación, orientación y características de fallas, vetillas y fracturas. El estudio se divide en dos etapas de trabajo: la primera es la implementación de un programa que calcula la densidad de fracturas (DF) para una base de datos discreta. La segunda etapa consiste en establecer un modelo de DF y, posteriormente, explorar la existencia de relaciones espaciales con el modelo estructural de dominios y la geología del depósito Los Pelambres. Adicionalmente, se genera un modelo unificado estructural-geotécnico. Para el cálculo de la DF el programa se divide en tres fases de procesamiento de datos: primero divide la base de datos en grupos según su proximidad espacial, luego, linealiza los datos pertenecientes a cada grupo y, finalmente, calcula la DF en una celda de 15 m de largo. Los resultados muestran que los programas implementados constituyen una herramienta que puede contribuir a disminuir los tiempos de generación de modelos de DF, mejorarlos cualitativamente y mejorar cuantitativamente los modelos estructurales en un menor tiempo optimizando el desarrollo minero. Los modelos de DF permitieron definir la distribución espacial en el rajo de 3 zonas en relación a la concentración de DF: alta, media y baja. Se observa que la zonación de DF está estrechamente relacionada con el sistema de fallas y lineamientos de arsénico de rumbo NE, correspondientes a fases tardías de deformación frágil, posterior a la mineralización en Los Pelambres. El modelo unificado estructural-geotécnico complementa la zonación de dominios estructurales con la variación de DF. Es construido a partir de un modelo de bloques del parámetro DF con una grilla de 60x60 m., estos bloques son clasificados en 4 categorías: bajo, medio, alto y muy alto. El modelo unificado muestra que DF está controlada mayormente por la litología, siendo los macizos mayormente fracturados aquellos dominados por rocas volcánicas y los menos fracturados por rocas intrusivas.
Alden, Matthew G. "Remote sensing techniques for monitoring coal surface mining and reclamation in the Power River Basin." Ohio : Ohio University, 2009. http://www.ohiolink.edu/etd/view.cgi?ohiou1257279388.
Lima, Júnior José Carlos [UNESP]. "Estudo do desempenho de barreiras de geotêxtil para contenção de sedimentos carreados pelo escoamento superficial." Universidade Estadual Paulista (UNESP), 2014. http://hdl.handle.net/11449/115898.
O setor de mineração brasileiro experimentou um crescimento de produção de minérios sem precedentes nos últimos anos, impulsionado pelo cenário externo favorável em relação do setor da construção civil. Consequentemente, essas atividades além de gerarem grandes volumes de rejeitos tem cada vez mais ocupado extensas áreas ficando o solo superficial totalmente desprotegido. Isso tem provocado uma maior cobrança por parte da sociedade na questão da responsabilidade ambiental e social. Como resultado, as empresas de mineração têm sido fortemente cobradas no tocante às barreiras de rejeito e principalmente quanto ao escoamento superficial de modo a proteger os recursos hídricos. Atualmente realizam-se estudos para a diminuição da contaminação de recursos hídricos em desaguamentos de rejeitos. Neste contexto, o material que vem dando resultados de qualidade e eficiência é o geotêxtil, por apresentar funções que possam ser usadas para a diminuição dos impactos. Este trabalho analisa o comportamento da barreira geotêxtil para contenção de sedimentos provindo do escoamento superficial de uma pedreira. O estudo analisou o comportamento de dois geotêxteis com diferentes gramaturas em função da respectiva abertura de filtração aparente. Para avaliar o desempenho do geotêxtil foi construído um modelo físico em laboratório de modo a avaliar o volume retido e do volume que passa, assim como, sua eficiência. Os resultados indicam que retenção do rejeito, o geoxtêxtil de menor gramatura e geotêxtil de maior gramatura apresentaram um comportamento uniforme no início devido ao agulhamento, embora o geotêxtil reutilizado de menor gramatura apresentou um maior eficiência em relação ao tempo que leva para que o rejeito não fique retido na barreira. O geotêxtil de menor gramatura apresentou uma maior eficiência quanto ao tempo de retenção embora u ma maior parcela de finos tenha passado. O geotêxtil com...
The brazilian mining industry experienced a growth of one production unprecedented in recent years, driven by favorable external scenario regarding the construction sector. Consequently, in addition to these activities generate large volumes of waste has increasingly occupied extensive areas getting totally unprotected topsoil. This has led to greater demand from society on the issue of environmental and social responsibility. As a result, mining companies have been heavily charged in respect of ensuring the barriers associated tailing and mostly about the runoff to protect water resources. Currently studies are conducted to reduce the contamination of water resources drainages tailings. In this context, the material that has been providing quality results and efficiency is the geotextile by the presenting functions that can be used for the mitigation of impacts. This paper analyzes the behavior of geotextile barrier for containment of sediment runoff stemmed from a quarry. The study analyzed the behavior of two geotextiles with different weights depending on their opening apparent filtration. To evaluate the performance of the geotextile a physical model has been built in the laboratory in order to evaluate the retentate volume and the volume that passes, as well as as its efficiency. The result indicate that for filtration and retention of the refuse, the geotextile ligher weight and greater weight had a uniform behavior at the beginning due to the needling, although geotextile reusable ligher weight had a greater efficiency compared to the time it takes to that the waste does not become trapped in the barrier. The geotextile lighter weight showed greater efficiency on the retention time although a larger proportion of fines has passed. The geotextile retains a heavier weight thinner but retained volume reaches the quota limit of basins with less time
Nakasuga, Wagner Massayuki [UNESP]. "Obtenção de um ataque químico padrão, zona de annealing parcial e temperatura de fechamento para o epídoto através do método dos traços de fissão." Universidade Estadual Paulista (UNESP), 2014. http://hdl.handle.net/11449/115953.
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Durante os anos 1970 e 1980 pesquisadores da comunidade de traços de fissão discutiram os problemas relacionados à inclusão do mineral epídoto nesta metodologia, pois haviam discrepâncias significativas entre resultados apresentados pelos laboratórios/pesquisadores. Os debates não levaram a nenhuma definição clara sobre as condições de ataque químico para a revelação dos traços de fissão, bem como, da temperatura de apagamento total dos traços. Por fim, estes problemas culminaram no abandono dos estudos sobre este mineral dentro da metodologia por traços de fissão por um longo período de tempo. A fim de trazer à tona os estudos com este mineral, foram adquiridas 11 amostras de epídotos através de transações comerciais e/ou fornecidas por pesquisadores. Essas amostras formaram o grupo inicial para os estudos de ataque químico, datação e annealing deste trabalho. Após estudos sistemáticos, está sendo sugerido um ataque químico padrão de HF 40% a 15ºC por 80 minutos para epídotos com composição química Ca2Al2(A1, Fe3+)(SiO4)(Si2O7)O(OH). Ainda foram datadas 3 amostras das 11 do grupo inicial de epídoto. Essas amostras são da região do Rio Grande do Norte-Brasil, e as idades obtidas, como resultado, se mostraram compatíveis entre si. Também, foram obtidos 12 pontos de annealing (medidas de densidades superficiais e comprimentos reduzidos), 4 para o tempo de 1 hora (250, 300, 425 e 475ºC), 4 para 10 horas (250, 300, 430 e 510ºC) e mais 4 para 1000 horas (350, 500, 600 e 670ºC). Isto, tanto em densidade como em comprimento reduzidos. No caso da densidade, em cada ponto, foram analisados por volta de 100 campos e no caso do comprimento de traços confinados 100 traços medidos. Com o conjunto de dados de annealing apresentado no mestrado desde doutorando (Nakasuga 2010) mais os obtidos nesta tese pôde-se ajustar as curvas de annealing utilizando os modelos cinéticos de Guedes et. al. (2004) e...
During the 70 and 80's researchers of fission tracks is discussed about issues related to inclusion of epidote mineral in this methodology because they had significant discrepancies between results reported by the laboratories/researches. The discussions did not lead to any clear definition of the conditions of etching for the development of fission tracks, as well as the temperature of the total fading of one. Finally, these problems resulted in the abandonment of the studies on this mineral in the method of fission tracks for a long period of time. In order to bring out studies with epidote, 11 samples epidotes were acquired through purchases or provided by researchers. These samples formed the initial group for studies of etching, dating and annealing of this work. After systematic studies, a standard etching has been suggested it is 40% HF at 15ºC for 80 minutes for epidotes with chemical composition Ca2Al2(Al,Fe3+)(SiO4)(Sl2O7)O(OH). Although 3 of the 11 samples of the inicial group of epidote were dated. These samples are from Rio Grande do Norte, Brazil region and the ages obtained, as a result, proved compatible among them. Moreover, 12 points annealing (measured surface densities and reduced length) 4 for 1 hour time (250, 300, 425 and 475ºC), 4 hours for 10 (250, 300, 430 and 510ºC) and another 4 for 1000 hours (350, 500, 600 and 670ºC) were made. This, in both reduced density and length of fission tracks. In case the density at each point, were analyzed around 100 fields and in the case the length of fission tracks 100 are confined measured. In the annealing data set shown in Nakasuga (2010) and the made in this thesis were adjusted annealing curves using the kinetic m odels Guedes et. al. (2004) and Lizandrão-Filho (2014). The result led to zones of Partial Annealing of 190-370ºC for data Nakasuga (2010) and 270-440ºC for the data made in this thesis, both for the period of 1 milion years. Through the Corsini et. al...
FAPESP: 10/20496-2
Lima, Júnior José Carlos. "Estudo do desempenho de barreiras de geotêxtil para contenção de sedimentos carreados pelo escoamento superficial /." Bauru, 2014. http://hdl.handle.net/11449/115898.
Banca: Anna Silvia Palcheco Peixoto
Banca: Eduardo Bell'Avanzi
Resumo: O setor de mineração brasileiro experimentou um crescimento de produção de minérios sem precedentes nos últimos anos, impulsionado pelo cenário externo favorável em relação do setor da construção civil. Consequentemente, essas atividades além de gerarem grandes volumes de rejeitos tem cada vez mais ocupado extensas áreas ficando o solo superficial totalmente desprotegido. Isso tem provocado uma maior cobrança por parte da sociedade na questão da responsabilidade ambiental e social. Como resultado, as empresas de mineração têm sido fortemente cobradas no tocante às barreiras de rejeito e principalmente quanto ao escoamento superficial de modo a proteger os recursos hídricos. Atualmente realizam-se estudos para a diminuição da contaminação de recursos hídricos em desaguamentos de rejeitos. Neste contexto, o material que vem dando resultados de qualidade e eficiência é o geotêxtil, por apresentar funções que possam ser usadas para a diminuição dos impactos. Este trabalho analisa o comportamento da barreira geotêxtil para contenção de sedimentos provindo do escoamento superficial de uma pedreira. O estudo analisou o comportamento de dois geotêxteis com diferentes gramaturas em função da respectiva abertura de filtração aparente. Para avaliar o desempenho do geotêxtil foi construído um modelo físico em laboratório de modo a avaliar o volume retido e do volume que passa, assim como, sua eficiência. Os resultados indicam que retenção do rejeito, o geoxtêxtil de menor gramatura e geotêxtil de maior gramatura apresentaram um comportamento uniforme no início devido ao agulhamento, embora o geotêxtil reutilizado de menor gramatura apresentou um maior eficiência em relação ao tempo que leva para que o rejeito não fique retido na barreira. O geotêxtil de menor gramatura apresentou uma maior eficiência quanto ao tempo de retenção embora u ma maior parcela de finos tenha passado. O geotêxtil com...
Abstract: The brazilian mining industry experienced a growth of one production unprecedented in recent years, driven by favorable external scenario regarding the construction sector. Consequently, in addition to these activities generate large volumes of waste has increasingly occupied extensive areas getting totally unprotected topsoil. This has led to greater demand from society on the issue of environmental and social responsibility. As a result, mining companies have been heavily charged in respect of ensuring the barriers associated tailing and mostly about the runoff to protect water resources. Currently studies are conducted to reduce the contamination of water resources drainages tailings. In this context, the material that has been providing quality results and efficiency is the geotextile by the presenting functions that can be used for the mitigation of impacts. This paper analyzes the behavior of geotextile barrier for containment of sediment runoff stemmed from a quarry. The study analyzed the behavior of two geotextiles with different weights depending on their opening apparent filtration. To evaluate the performance of the geotextile a physical model has been built in the laboratory in order to evaluate the retentate volume and the volume that passes, as well as as its efficiency. The result indicate that for filtration and retention of the refuse, the geotextile ligher weight and greater weight had a uniform behavior at the beginning due to the needling, although geotextile reusable ligher weight had a greater efficiency compared to the time it takes to that the waste does not become trapped in the barrier. The geotextile lighter weight showed greater efficiency on the retention time although a larger proportion of fines has passed. The geotextile retains a heavier weight thinner but retained volume reaches the quota limit of basins with less time
Mestre