Log in

Relevant bibliographies by topics / Nominal stress

Contents

Journal articles
Dissertations / Theses
Books
Book chapters
Conference papers
Reports

Academic literature on the topic 'Nominal stress'

Author: Grafiati

Published: 4 June 2021

Last updated: 11 March 2023

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Nominal stress.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Nominal stress"

1

Qiao, H. "Two-parameter nominal stress approach." International Journal of Fatigue 17, no. 5 (1995): 339–41. http://dx.doi.org/10.1016/0142-1123(95)99734-r.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

MATSUMOTO, Toshi, Noboru TOMIOKA, and Akifumi OKABE. "Theoretical Equation of Nominal Structural Stress." Proceedings of the 1992 Annual Meeting of JSME/MMD 2000 (2000): 741–42. http://dx.doi.org/10.1299/jsmezairiki.2000.0_741.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Htoo, Aye Thant, Yukio Miyashita, Yuichi Otsuka, Yoshiharu Mutoh, and Shigeo Sakurai. "Kinking Behavior of S-N Curve for Ti6Al4V Alloy Notched Specimen under a Load-Controlled High Cycle Fatigue Test." Materials Science Forum 867 (August 2016): 39–44. http://dx.doi.org/10.4028/www.scientific.net/msf.867.39.

Full text

Abstract:

Notch fatigue behavior of Ti-6Al-4V titanium alloy has been investigated under a load-controlled high cycle fatigue test. The S-N curve was kinked at the critical nominal stress amplitude, where the plastic deformation nucleated at notch root. The plastic zone size at the critical nominal stress amplitude was almost equal to the size of 4 grains of the present Ti-6Al-4V alloy, which were the same findings as in the 2024-T4 alloy used in the previous study. Above the critical nominal stress amplitude, the local stress ratio at notch root decreased with increasing nominal stress amplitude. The c

APA, Harvard, Vancouver, ISO, and other styles

4

Wang, Bin Jie, Qiang Li, and Zhi Ming Liu. "Research on the Stress Fatigue Assessment about the Hot Spot Stress on the Bogie Frame." Advanced Materials Research 328-330 (September 2011): 1281–86. http://dx.doi.org/10.4028/www.scientific.net/amr.328-330.1281.

Full text

Abstract:

As the loading conditions for the railway vehicles are becoming more and more complex, nominal stress has been unable to fully satisfy the requirements for assessing fatigue strength for weld structures. Hot spots stress is much more closer to the actual stress of a weld structure, it can suit the demand of high speed trains’ fatigue evaluation better. In this paper, on the basis of UIC615-4 standard, the nominal stress of the welded bogie frame was calculated and its fatigue strength was assessed using FEA method. Also, set the joint section between drawbar seat and the transom bottom flange

APA, Harvard, Vancouver, ISO, and other styles

5

Inal, M. Y., M. Alam, R. A. Peascoe, and T. R. Watkins. "Residual stress in deuterium implanted nominal copper coatings." Journal of Applied Physics 88, no. 7 (2000): 3919. http://dx.doi.org/10.1063/1.1289795.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Ha¨rkega˚rd, G., and S. So̸rbo̸. "Applicability of Neuber’s Rule to the Analysis of Stress and Strain Concentration Under Creep Conditions." Journal of Engineering Materials and Technology 120, no. 3 (1998): 224–29. http://dx.doi.org/10.1115/1.2812347.

Full text

Abstract:

A differential form of Neuber’s rule, originally proposed by M. Chaudonneret, has been formulated for a generic viscoplastic notch problem, making extensive use of suitably normalised stress, strain and time. It has been shown that the stress-strain history at the root of a notch in a viscoplastic body can be determined directly from the elastic response, provided far-field viscoplastic strains can be neglected. Neuber’s rule has also been applied to the more general cases of stress and strain concentration at notches under (i) nominal creep conditions (constant nominal stress) and (ii) stress

APA, Harvard, Vancouver, ISO, and other styles

7

KANEKO, Tatsuhiko, Yosuke ISHIKAWA, Takaya KANEKO, Akifumi OKABE, and Noboru TOMIOKA. "GS0112-442 Method for Calculating Nominal Structural Stress of Arc Welded Structure : Position of fatigue failure and nominal structural stress." Proceedings of the Materials and Mechanics Conference 2015 (2015): _GS0112–44—_GS0112–44. http://dx.doi.org/10.1299/jsmemm.2015._gs0112-44.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

Hou, Shanqin, and Jinquan Xu. "A phenomenological life evaluation method for corrosion fatigue." Corrosion Reviews 35, no. 2 (2017): 75–83. http://dx.doi.org/10.1515/corrrev-2016-0063.

Full text

Abstract:

AbstractConsidering interacted damage accumulations induced by corrosion, cyclic fatigue, and stress corrosion cracking, a phenomenological corrosion fatigue (CF) life evaluation formula has been proposed. A concept of nominal CF limit has been introduced, which indicates whether cyclic damage accumulation is active or not. It is found that cyclic fatigue damage accumulation enhanced by corrosion is the dominative damage under relatively high stress amplitudes (compared to the nominal limit), whereas, under low stress amplitudes, corrosion damage accumulation would become the dominative one. S

APA, Harvard, Vancouver, ISO, and other styles

9

Wang, Bin Jie, Qiang Li, and Zhi Ming Liu. "Study of Typical Welded Joint Hot Spot Stress Concentration Factor." Advanced Materials Research 160-162 (November 2010): 1482–87. http://dx.doi.org/10.4028/www.scientific.net/amr.160-162.1482.

Full text

Abstract:

Hot spot stress (HSS) approach is more applicable for fatigue evaluation, because it is more closer to the real stress at the welded notch than nominal stress.This paper studies a typical welded joint, fillet welded joint, which is used widely in high-speed car. Hot spot stress concentration factor is calculated under different nominal stress and loading methods. The S-N curves belong to nominal stress and hot spot stress were analysized. The result show that the difference between the S-N curves under different load style can be reduced greatly by hot spot stress. The hot spot stress characte

APA, Harvard, Vancouver, ISO, and other styles

10

Guan, Jun Feng, Li Min Zhao, and Shun Bo Zhao. "Control Crack Width by Nominal Tensile Stress for RC Beams." Applied Mechanics and Materials 71-78 (July 2011): 4506–9. http://dx.doi.org/10.4028/www.scientific.net/amm.71-78.4506.

Full text

Abstract:

In order to convenient application in optimum design of large and complex structures, theoretical formula of nominal tensile stress of concrete is deduced relating to the maximum crack width of RC beam in serviceability. By further statistical analysis of test data in certain reliability, simplified and practical formulas are proposed for calculating the nominal tensile stress of concrete. Therefore, the control of maximum crack width is replaced by control of nominal tensile stress of concrete, which shall be easier to realize in optimum design of concrete structures.

APA, Harvard, Vancouver, ISO, and other styles

More sources

Dissertations / Theses on the topic "Nominal stress"

1

Grove, Alewyn Petrus. "Development of a finite element based nominal stress extraction procedure for fatigue analysis of welded structures." Diss., University of Pretoria, 2006. http://upetd.up.ac.za/thesis/available/etd-12182007-125836/.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Pirouznia, Pouyan. "High cycle fatigue properties of stainless martensitic chromium steel springs." Thesis, KTH, Materialteknologi, 2012. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-103201.

Full text

Abstract:

For many materials and components like in high speed trains and airplanes fatigue failures occur in the range of over 107 load cycles which is called the high cycle fatigue range. A modern version of the springs was invented which are applied in a certain application. Ultrasonic fatigue testing (20 kHz machine) was conducted for evaluating the steel of the springs. This research explores the fundamental understanding of high cycle fatigue testing of strip steel and assesses a stainless martensitic chromium steel at the high cycle fatigue range. Finite element modeling was conducted to gain kno

APA, Harvard, Vancouver, ISO, and other styles

3

Karlsson, Hanna. "Static and Fatigue Analyses of Welded Joints in Thin-Walled Tubes." Thesis, Blekinge Tekniska Högskola, Institutionen för maskinteknik, 2018. http://urn.kb.se/resolve?urn=urn:nbn:se:bth-16779.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

RODRIGUEZ, HABIB ZAMBRANO. "THE ESTIMATES OF THE SIZE AND SHAPE OF THE PLASTIC ZONES, TRADITIONALLY USED IN THE NOMINAL STRESS IN FRACTURE MECHANICS." PONTIFÍCIA UNIVERSIDADE CATÓLICA DO RIO DE JANEIRO, 2007. http://www.maxwell.vrac.puc-rio.br/Busca_etds.php?strSecao=resultado&nrSeq=11079@1.

Full text

Abstract:

COORDENAÇÃO DE APERFEIÇOAMENTO DO PESSOAL DE ENSINO SUPERIOR<br>As estimativas do tamanho e forma da zona plástica, tradicionalmente usada na Mecânica da Fratura Linear Elástica (MFLE), são baseadas na suposição que o fator de intensidade de tensões KI (ou KII ou KIII) é o único parâmetro necessário para descrevê-las. Quando as zonas plásticas são obtidas a partir da solução de Inglis para o campo de tensões em volta de um furo elíptico, ou da solução completa de Westergaard para uma placa com uma trinca central, pode-se observar que as estimativas tradicionais subestimam a localização

APA, Harvard, Vancouver, ISO, and other styles

5

Nilsson, Pontus, and Jan Tordsson. "Improved lifetime of a rubber spring in an articulated hauler through product development." Thesis, Linnéuniversitetet, Institutionen för maskinteknik (MT), 2017. http://urn.kb.se/resolve?urn=urn:nbn:se:lnu:diva-65832.

Full text

Abstract:

Dampening systems are important in heavy vehicles utilized in rough terrains, with purpose to reduce shocks and vibrations with negative influences on the vehicle and, more importantly, on the operator of the vehicle. During the years the heavy vehicles require sturdier construction parts, due to demands on higher load capacity, where the easy solution to scale up the construction parts is not always applicable for dampening systems with nonlinear behavior. Hence, the sturdiness in the design of these dampening systems requires improvement. In this thesis the design of the rubber spring used a

APA, Harvard, Vancouver, ISO, and other styles

6

Stašys, Gintaras. "Centrinio šildymo kieto kuro katilo ,,Kalvis - 4D'' parametrų tyrimas." Master's thesis, Lithuanian Academic Libraries Network (LABT), 2012. http://vddb.laba.lt/obj/LT-eLABa-0001:E.02~2012~D_20120831_110549-17845.

Full text

Abstract:

Šiame darbe pateikti kuro kaloringumo priklausomybės nuo drėgmės skaičiavimai. Atlikus bandymus, nustatyta katilo nominali ir minimali galia. Skaičiuojant tiesioginiu ir netiesioginiu metodu nustatytas katilo naudingumo keficientas. Atlikta katilo korpuso įtempimo būvio analizė. Buvo skaičiuojama katilo šiluminė varža, pateikti pasiūlymai katilo techninių parametrų gerinimui.<br>This paper presents the dependence on fuel moisture calorie calculations, tests the boiler nominal and minimum power. Calculation of direct and indirect method keficientas the boiler. Boiler body made of life stress an

APA, Harvard, Vancouver, ISO, and other styles

7

Hofmann, Stefan. "Untersuchungen zur Ermüdungsfestigkeit von Pressverbindungen." Doctoral thesis, Universitätsbibliothek Chemnitz, 2017. http://nbn-resolving.de/urn:nbn:de:bsz:ch1-qucosa-213676.

Full text

Abstract:

Pressverbindungen gehören zu den klassischen Maschinenelementen und werden insbesondere in der Antriebstechnik häufig eingesetzt. Zur sicheren und zugleich wirtschaftlichen Auslegung derartiger Verbindungen unter zyklischen Lasten fehlen generell gültige sowie abgesicherte normative Vorgaben bzw. Richtlinien für den Anwender. Insbesondere ist dies dann zutreffend, wenn Geometrien vorkommen, für welche keine Tabellen- bzw. Erfahrungswerte existieren. In dieser Arbeit werden ausführliche experimentelle Untersuchungen zur Ermüdungsfestigkeit von Pressverbindungen einer Standardgeometrie vorgestel

APA, Harvard, Vancouver, ISO, and other styles

8

Brink, Lize. "An investigation into the weld integrity of the head–to–skirt junction on tall distillation columns / L. Brink." Thesis, North-West University, 2010. http://hdl.handle.net/10394/4877.

Full text

Abstract:

This study addresses the fatigue life of the head–to–skirt welds of tall distillation columns. Fatigue tests were done on two types of weld geometries which approximate the head–toskirt configurations. From the fatigue tests it was determined that the fatigue life of the experimental samples can be substantially improved by applying weld build–up between the head and the skirt. The expected fatigue life of the test samples was determined by way of calculation employing the so called Nominal–Stress–Approach, the Effective–Notch–Stress–Approach and the Stress–Life–Approach. For both the Nominal–

APA, Harvard, Vancouver, ISO, and other styles

9

Ryšánek, Michal. "Posouzení životnosti svařované žebrované hřídele generátoru." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2015. http://www.nusl.cz/ntk/nusl-231103.

Full text

Abstract:

This master thesis deals primarily with the prediction of fatigue life of welded ribbed shaft. Recommendations taken from the International Institute of Welding (IIW) are used to express the stress values and the fatigue life. The stress values of examined place are expressed by approach of nominal stress, structural hot spot stress and effective notch stress. Results from stress-strain analysis are combined together with fatigue strength curves for prediction of the fatigue life. At the end of the analysis, the predicted fatigue life is compared with design life of welded ribbed shaft.

APA, Harvard, Vancouver, ISO, and other styles

10

Abdelwahab, Kemal, and Mohamed Abdirizag Farah. "Spricktillväxt i stålkonstruktioner på grund av utmattning." Thesis, KTH, Byggteknik och design, 2019. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-259364.

Full text

Abstract:

Stålbroars approximativa livslängd bestäms av stålets utmattningshållfasthet, då utmattning är en av de främsta anledningarna till att livslängden begränsas. I Sverige existerar ett antal broar som närmar sig slutet av sin livslängd, samtidigt som behovet för kapacitet och kraven på broarna ökar. Flertalet av dessa broar är i behov av upprustning. Däremot är det inte möjligt ur vare sig ett ekonomiskt- eller miljöperspektiv att byta ut alla broar, och därför behöver de broar som är mest kritiska prioriteras. Vid utmattningsdimensionering av stålbroar beaktas hela spänningsvidden, oavsett om sp

APA, Harvard, Vancouver, ISO, and other styles

More sources

Books on the topic "Nominal stress"

1

Multiaxial notch fatigue: From nominal to local stress/strain quantities. CRC Press, 2009.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

2

Claudio, Ferracci, ed. Stradario (in) perugino: Quando il dialetto nomina le vie. Aguaplano, 2010.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

3

Bäckström, Mika. Multiaxial fatigue life assessment of welds based on nominal and hot spot stresses. VTT Technical Research Centre of Finland, 2003.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

4

Salinas-Rodríguez, Sergio G., Juan Arévalo, Juan Manuel Ortiz, et al., eds. Microbial Desalination Cells for Low Energy Drinking Water. IWA Publishing, 2021. http://dx.doi.org/10.2166/9781789062120.

Full text

Abstract:

The world's largest demonstrator of a revolutionary energy system in desalination for drinking water production is in operation. MIDES uses Microbial Desalination Cells (MDC) in a pre-treatment step for reverse osmosis (RO), for simultaneous saline stream desalination and wastewater treatment. MDCs are based on bio-electro-chemical technology, in which biological wastewater treatment can be coupled to the desalination of a saline stream using ion exchange membranes without external energy input. MDCs simultaneously treat wastewater and perform desalination using the energy contained in the was

APA, Harvard, Vancouver, ISO, and other styles

5

Cooler, Isabella. Gary Oldman Color by Number: Legendary Academy Award and Famous Emmy Nominee, Best British Actor and Classical Hollywood Gem Inspired Color Number Book for Fans Adults Stress Relief Gift. Independently Published, 2020.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

6

Sherea, Alan. Robert Downey Jr. Color by Number: Tony Stark or Iron Man and Sherlock Holmes, Academy Award Nominee and Hollywood Punk Inspired Color Number Book for Fans Adults Stress Relief Gift. Independently Published, 2020.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

7

DiPaolo, Marc, ed. Working-Class Comic Book Heroes. University Press of Mississippi, 2018. http://dx.doi.org/10.14325/mississippi/9781496816641.001.0001.

Full text

Abstract:

The Occupy Wall Street protests popularized the notion that “We are the 99 percent” mobilized against the political and economic interests of “the top 1%.” Some protestors wore Guy Fawkes masks in honor of the anarchist hero V, from Alan Moore’s comic book V for Vendetta. The 2016 United States Presidential election saw further evidence of populist unrest, with Democratic Primary candidate Bernie Sanders and Republican Party nominee Donald J. Trump making the economic fears of the beleaguered working- and middle-classes centerpieces of their campaigns. Since populist movements play an increasi

APA, Harvard, Vancouver, ISO, and other styles

Book chapters on the topic "Nominal stress"

1

Iscrulescu, Cristian. "The Nominal Stress System of Romanian (re)revisited." In New Perspectives on Romance Linguistics. John Benjamins Publishing Company, 2006. http://dx.doi.org/10.1075/cilt.276.10isc.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Chen, Hongxia, and Yunxia Chen. "A Nominal Stress Based Reliability Analysis Method for Dependent Fatigue and Shock Processes." In Lecture Notes in Mechanical Engineering. Springer International Publishing, 2014. http://dx.doi.org/10.1007/978-3-319-09507-3_102.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Feldstein, Ronald F. "4. Regular and Deviant Patterns of Russian Nominal Stress and Their relationship to Markedness." In Toward a Calculus of Meaning. John Benjamins Publishing Company, 1996. http://dx.doi.org/10.1075/sfsl.43.12fel.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Zrilic, Djuro G. "Δ-Σ Methods for Frequency Deviation Measurement of a Known Nominal Frequency Value." In Functional Processing of Delta-Sigma Bit-Stream. Springer International Publishing, 2020. http://dx.doi.org/10.1007/978-3-030-47648-9_9.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

"nominal yield stress of connection." In Tubular Structures V. CRC Press, 2004. http://dx.doi.org/10.1201/9781482271355-174.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

"Nominal stress approach for welded joints." In Fatigue assessment of welded joints by local approaches, Second Edition. CRC Press, 2006. http://dx.doi.org/10.1201/9781439832806.ch2.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

Radaj, D., C. M. Sonsino, and W. Fricke. "Nominal stress approach for welded joints." In Fatigue Assessment of Welded Joints by Local Approaches. Elsevier, 2006. http://dx.doi.org/10.1533/9781845691882.13.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

Radaj, Dieter. "Design codes, assessment of nominal and structural stress." In Design and Analysis of Fatigue Resistant Welded Structures. Elsevier, 1990. http://dx.doi.org/10.1533/9781845698751.163.

Full text

APA, Harvard, Vancouver, ISO, and other styles

9

"Chapter 5. Rhythmic phenomena in Dutch nominal phrases: left-directional rhythmic adjustments." In A Metrical Theory of Rhythmic Stress. De Gruyter, 1990. http://dx.doi.org/10.1515/9783110853193-005.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

"Chapter 6. Rhythmic phenomena in Dutch nominal compounds: right-directional rhythmic adjustments." In A Metrical Theory of Rhythmic Stress. De Gruyter, 1990. http://dx.doi.org/10.1515/9783110853193-006.

Full text

APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Nominal stress"

1

Apostolouda, Vasiliki. "Properties of nominal stress grammar in Greek." In 11th International Conference of Experimental Linguistics. ExLing Society, 2020. http://dx.doi.org/10.36505/exling-2020/11/0006/000421.

Full text

Abstract:

This study reports on the findings of a production experiment that aimed at exploring the distribution of stress patterns in the internal grammar of young and adult native speakers of Greek, with a special focus on nominal stress, as these are reflected on their decisions on assigning stress in novel inflected words. More specifically, we investigate whether morphological information at the right edge of the word, together with lexical frequency, are potential cues for stress position. We also examine differences in the grammars of young and adults speakers.

APA, Harvard, Vancouver, ISO, and other styles

2

Lee, Li, Christian Ball, and Gang Lou. "Nominal Stress Calculation Based on FEA Element Nodal Forces." In Brake Colloquium & Exhibition - 36th Annual. SAE International, 2018. http://dx.doi.org/10.4271/2018-01-1898.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Breach, Michael R. "The Qualification of BWR Steam Dryer Weldments Exposed to Cyclic Loading Using Finite Element Methods." In ASME 2013 Pressure Vessels and Piping Conference. American Society of Mechanical Engineers, 2013. http://dx.doi.org/10.1115/pvp2013-97503.

Full text

Abstract:

The qualification of welds other than full penetration groove welds exposed to cyclic loading using finite element methods requires an understanding of the basis behind classical methodologies. These methodologies usually address nominal stresses. The nominal stress (S-N) method was the first approach developed to try to understand this failure process and is still widely used in applications where the applied stress is nominally within the elastic range of the material and the number of cycles to failure is large. From this point of view, the nominal stress approach is best suited to that are

APA, Harvard, Vancouver, ISO, and other styles

4

El-Sayed, Mohamed E. M., and Elizabeth H. Lund. "Optimum Design for a Required Fatigue Life Based on Nominal Stress." In International Congress & Exposition. SAE International, 1990. http://dx.doi.org/10.4271/900832.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Zhou, Yuege, Dingyun Liu, Dandan Li, Yan Zhao, and Weifang Zhang. "Thermal Fatigue Life Prediction for Optical Fibers Based on Nominal Stress Method." In 2020 Prognostics and Health Management Conference (PHM-Besançon). IEEE, 2020. http://dx.doi.org/10.1109/phm-besancon49106.2020.00023.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Anvari, Majid, Øyvind Fagnastøl, and Bernt J. Leira. "Assessment of Weld Fatigue by Effective Notch Stress Approach." In ASME 2015 34th International Conference on Ocean, Offshore and Arctic Engineering. American Society of Mechanical Engineers, 2015. http://dx.doi.org/10.1115/omae2015-42364.

Full text

Abstract:

Applicability of different approaches, i.e. nominal stress-, structural hot spot- and effective notch stress approach, for fatigue assessment of welded structures has been discussed. The effective notch stress approach was validated for a cruciform fillet welded and fully penetration welded joint, according to DNV guideline [1]. The same fillet welded joint was further investigated for varying weld sizes. The results show that with changing weld size, there are considerable differences between calculated stresses, and specially calculated fatigue lives, when comparing with nominal stress appro

APA, Harvard, Vancouver, ISO, and other styles

7

Kamohara, S., D. Park, and C. Hu. "Deep-trap SILC (stress induced leakage current) model for nominal and weak oxides." In 1998 IEEE International Reliability Physics Symposium Proceedings 36th Annual. IEEE, 1998. http://dx.doi.org/10.1109/relphy.1998.670443.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

Garg, Ajay, and Ravi Tetambe. "Elastic Stress Concentration Factors (Kt) by Stress Gradient Method Using FEA." In ASME 1996 Design Engineering Technical Conferences and Computers in Engineering Conference. American Society of Mechanical Engineers, 1996. http://dx.doi.org/10.1115/96-detc/cie-1615.

Full text

Abstract:

Abstract The elastic stress concentration factor, Kt, is critical in determining the life of machines, especially in the case of notched components experiencing high cycle fatigue. This Kt is defined as the ratio of the maximum stress (σmax) at the notch to the nominal stress (σnom) in the region away from the notch effect. For simple geometries such as, plate with a hole, calculation of Kt from either closed form solution or from making simple but valid assumptions is possible [1,2]. However, for complex machine components such data is usually not available in the literature. Using Kt values

APA, Harvard, Vancouver, ISO, and other styles

9

Muhammed, A., and A. Stacey. "Probabilistic S-N Fatigue Assessment Methods for Welded Joints in Offshore Structures." In ASME 2008 27th International Conference on Offshore Mechanics and Arctic Engineering. ASMEDC, 2008. http://dx.doi.org/10.1115/omae2008-57505.

Full text

Abstract:

A study of probabilistic fatigue assessment methods for offshore structures confirmed that fatigue life predictions for offshore welded joints is dominated by uncertainties in hot spot stress estimation, arising from uncertainties in nominal stress and stress concentration factors. Analysis of data from previous fatigue studies on North Sea jacket structures conducted in the late 1980s suggests that nominal stresses are, in general, overestimated by about 30% and the COV of the bias is about 0.35. The study demonstrated that in-service fatigue failure probability is not only dependent on the C

APA, Harvard, Vancouver, ISO, and other styles

10

Karge, Michael. "Improvements in the Fatigue Assessment of Large Welded Structures Using the Nominal Stress Approach." In SAE 2012 Commercial Vehicle Engineering Congress. SAE International, 2012. http://dx.doi.org/10.4271/2012-01-1910.

Full text

APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Nominal stress"

1

Kaneko, Tsuneaki, Akifumi Okabe, and Noboru Tomioka. A Method of Calculating Nominal Structural Stress for Spot-Welded Structures. SAE International, 2005. http://dx.doi.org/10.4271/2005-08-0516.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

FINITE ELEMENT SIMULATION FOR ULTRA-HIGH-PERFORMANCE CONCRETE-FILLED DOUBLE-SKIN TUBES EXPOSED TO FIRE. The Hong Kong Institute of Steel Construction, 2022. http://dx.doi.org/10.18057/icass2020.p.263.

Full text

Abstract:

Ultra-high-performance concrete (UHPC) or ultra-high-strength concrete (UHSC) are alternatively used to reduce construction materials, thereby achieving more sustainable constructions. Moreover, engaging the advantages of concrete cores and outer steel tubes in concrete-filled steel tubes (CFST) or ductile concrete-filled double-skin tubes (CFDST) is of great interest for the better performance of such members under fire. Nevertheless, current design provisions do not provide design models for UHPC-filled double-skin tubes under fire, and existing finite-element (FE) methodologies available in

APA, Harvard, Vancouver, ISO, and other styles

We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!