Log in

Relevant bibliographies by topics / Plates (Engineering) Impact / Dissertations / Theses

To see the other types of publications on this topic, follow the link: Plates (Engineering) Impact.

Dissertations / Theses on the topic 'Plates (Engineering) Impact'

Author: Grafiati

Published: 4 June 2021

Last updated: 2 February 2022

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the top 25 dissertations / theses for your research on the topic 'Plates (Engineering) Impact.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Browse dissertations / theses on a wide variety of disciplines and organise your bibliography correctly.

1

Zheng, Daihua. "Low Velocity Impact Analysis of Composite Laminated Plates." University of Akron / OhioLINK, 2007. http://rave.ohiolink.edu/etdc/view?acc_num=akron1194991384.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Yuen, Steeve Chung Kim. "Deformation and tearing of uniformly blast-loaded quadrangular stiffened plates." Master's thesis, University of Cape Town, 2000. http://hdl.handle.net/11427/14952.

Full text

Abstract:

Includes bibliographical references (leaves 131-134).<br>An investigation into the deformation and tearing of stiffened quadrangular plates subjected to a uniform blast load is presented. A series of experimental results and numerical modelling using the finite element package; ABAQUS, on built-in quadrangular mild steel plates of different stiffener configurations and sizes subjected to a uniform blast load are reported. The main objectives of this investigation are to determine the dynamic response of stiffened quadrangular plates subjected to uniform blast loads, to assess the effect of the

APA, Harvard, Vancouver, ISO, and other styles

3

Butalia, Tarunjit S. "Dynamic response of advanced composite plates subjected to low velocity impact /." The Ohio State University, 1996. http://rave.ohiolink.edu/etdc/view?acc_num=osu1487935573772341.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Big-Alabo, Akuro. "Multilayered sensor-actuator plates for active mitigation of elastoplastic impact effects." Thesis, University of Glasgow, 2015. http://theses.gla.ac.uk/6474/.

Full text

Abstract:

Analytical models have been used here to conduct detailed studies on the elastoplastic response of rectangular plates subjected to normal impact of a rigid sphere. Analytical models have been derived using a complete modelling approach in which the equations of motion of the contacting bodies (i.e. the plate and spherical impactor) and a compliance law for the local contact mechanics are used to formulate the impact model. To account for the local contact mechanics, a novel Meyer-type compliance model based on elastic-elastoplastic-fully plastic material behaviour has been formulated and valid

APA, Harvard, Vancouver, ISO, and other styles

5

Murtiadi, Suryawan. "Behavior of high-strength concrete plates under impact loading." Thesis, National Library of Canada = Bibliothèque nationale du Canada, 1999. http://www.collectionscanada.ca/obj/s4/f2/dsk1/tape8/PQDD_0003/MQ42416.pdf.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Abdusamad, Abdunaser M. "FEKO ANALYSIS OF ANTENNAS ON PLATES AND THE IMPACT ON TOMOGRAPHIC IMAGING." University of Dayton / OhioLINK, 2020. http://rave.ohiolink.edu/etdc/view?acc_num=dayton1582731346078004.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

Ozturk, Gokhan. "Numerical And Experimental Investigation Of Perforation Of St-37 Steel Plates By Oblique Impact." Master's thesis, METU, 2010. http://etd.lib.metu.edu.tr/upload/3/12612045/index.pdf.

Full text

Abstract:

In this thesis, it is aimed to determine the ballistic limit thicknesses of ST-37 steel plates under oblique impact of bullets having hard steel core (DIN 100Cr6 at 61-62 HRc) by using both experimental and numerical methods. In experimental part, angles of attack of the bullets are changed from 0 to 70 degrees by 10 degrees increments. Bullet velocities are measured for each shot just before the impact and they are found to be between 790-830 m/s. The minimum plate thickness that is not perforated and the maximum plate thickness that is perforated are determined by conducting three shots for

APA, Harvard, Vancouver, ISO, and other styles

8

Lin, Tian Ran. "Vibration of finite coupled structures, with applications to ship structures." University of Western Australia. School of Mechanical Engineering, 2006. http://theses.library.uwa.edu.au/adt-WU2006.0093.

Full text

Abstract:

[Truncated abstract] Shipbuilding is fast becoming a priority industry in Australia. With increasing demands to build fast vessels of lighter weight, shipbuilders are more concerned with noise and vibration problems in ships than ever. The objective of this thesis is to study the vibration response of coupled structures, in the hope that the study may shed some light in understanding the general features of ship vibration. An important feature characterizing the vibration in complex structures is the input mobility, as it describes the capacity of structures in accepting vibration energy from

APA, Harvard, Vancouver, ISO, and other styles

9

Pyrzowski, Lukasz. "Analyse visco-plastique de l'endommagement des plaques et coques soumises aux impacts." Phd thesis, Université d'Orléans, 2010. http://tel.archives-ouvertes.fr/tel-00608054.

Full text

Abstract:

Le travail concerne le comportement des plaques et coques soumises à des charges dynamiques dues à des explosions des mélanges gazeux. Des problèmes mécaniques d'apparition des fissures et d'endommagement ductile sont analysés. En introduction, la revue de la littérature a été présentée ainsi que les théories actuellement les plus souvent utilisées dans ce domaine. Une brève description des outils numériques qui ont servi dans l'étude a été également donnée. Les essais expérimentaux et les résultats des mesures ont été discutés dans la deuxième partie du mémoire. Ils ont permis d'identifier le

APA, Harvard, Vancouver, ISO, and other styles

10

Abraham, Aliza Opila. "Extreme wave impact on a flexible plate." Thesis, Massachusetts Institute of Technology, 2016. http://hdl.handle.net/1721.1/104117.

Full text

Abstract:

Thesis: S.M., Massachusetts Institute of Technology, Department of Mechanical Engineering, 2016.<br>This electronic version was submitted by the student author. The certified thesis is available in the Institute Archives and Special Collections.<br>Cataloged from student-submitted PDF version of thesis.<br>Includes bibliographical references (pages 99-102).<br>This thesis describes the use of a combination of various visual techniques to characterize the flow-structure interaction of a breaking wave impacting a flexible vertically mounted plate. Several experiments were conducted on a simulat

APA, Harvard, Vancouver, ISO, and other styles

11

Qiu, Jin 1974. "Modeling of plate impact dynamics and noise." Thesis, Massachusetts Institute of Technology, 1999. http://hdl.handle.net/1721.1/80514.

Full text

APA, Harvard, Vancouver, ISO, and other styles

12

Bell, A. P. "Finite element analysis of shear band failure with particular reference to circular plate impact." Thesis, City University London, 1989. http://openaccess.city.ac.uk/7410/.

Full text

Abstract:

This thesis addresses the problem of the numerical simulation of the shear band or 'plugging' mode of failure in metallic solids. Particular reference is made to the normal impact between blunt projectiles and circular plates of thin to intermediate thickness. The thesis presents a two dimensional axisymmetric and plane strain finite element computer program related to the Lagrangian reference frame. A four node element with one point quadrature and associated stabilisation is utilised, and is shown to be superior to standard isoparametric implementations when applied within an explicit time i

APA, Harvard, Vancouver, ISO, and other styles

13

Guénette, Styven. "Finite element simulation of debonding of face/core interface in a circular sandwich plate under impact." Thesis, McGill University, 2011. http://digitool.Library.McGill.CA:80/R/?func=dbin-jump-full&object_id=103606.

Full text

Abstract:

The thesis addresses the issue of possible debonding of faces of a sandwich plate under hail-like impact conditions. The interface stresses are considered responsible for the debonding, and to design against this possibility, it is necessary to determine them correctly. The problem is addressed by constructing a FE program to accomplish the following tasks. (i) To analyse a circular sandwich plate as a three dimensional axisymmetric structure, supported at periphery and subjected to a central static load equivalent to the dynamic impact load. Since no plate theories are used, through-the-thick

APA, Harvard, Vancouver, ISO, and other styles

14

Yuan, Fuping. "PLATE IMPACT EXPERIMENTS TO INVESTIGATE DYNAMIC SLIP, DEFORMATION AND FAILURE OF MATERIALS." Case Western Reserve University School of Graduate Studies / OhioLINK, 2008. http://rave.ohiolink.edu/etdc/view?acc_num=case1193161550.

Full text

APA, Harvard, Vancouver, ISO, and other styles

15

Florez, Nickolas Fidel. "Impact of pipe length on horizontally placed injection wells : a case study on bioventing at Naval Air Engineering Station, Lakehurst, New Jersey." Thesis, Monterey, California. Naval Postgraduate School, 1995. http://hdl.handle.net/10945/25983.

Full text

APA, Harvard, Vancouver, ISO, and other styles

16

Venturini, Nicolas. "Experimental Broadband Signal Reconstruction for Plate-like Structures." Master's thesis, Alma Mater Studiorum - Università di Bologna, 2020. http://amslaurea.unibo.it/20470/.

Full text

Abstract:

In the Structural Health Monitoring (SHM) field, the Acoustic Emission (AE) technique is a passive method by which damage is localized and identified by capturing Lamb Waves (LW) signals propagating in a plate-like structure. The reconstruction of emitted signals from damage at the source location constitutes one of the main challenges faced by the SHM community. Recently, the application of a Frequencies Compensation Transfer Function (FCTF) has been used to reconstruct narrowband and broadband signals through a hybrid experimental and numerical Time Reversal (TR) process on aluminum plates.

APA, Harvard, Vancouver, ISO, and other styles

17

Zuanetti, Bryan. "Plate Impact Experiments for Studying the Dynamic Response of Commercial-Purity Aluminum at Temperatures Approaching Melt." Case Western Reserve University School of Graduate Studies / OhioLINK, 2019. http://rave.ohiolink.edu/etdc/view?acc_num=case1557132337419911.

Full text

APA, Harvard, Vancouver, ISO, and other styles

18

Almeida, Roberto Silva de 1978. "Identificaçao do local de impacto em placas instrumentadas com sensores piezelétricos." [s.n.], 2015. http://repositorio.unicamp.br/jspui/handle/REPOSIP/265723.

Full text

Abstract:

Orientador: Carlos Alberto Cimini Junior<br>Dissertação (mestrado) - Universidade Estadual de Campinas, Faculdade de Engenharia Mecânica<br>Made available in DSpace on 2018-08-28T23:32:20Z (GMT). No. of bitstreams: 1 Almeida_RobertoSilvade_M.pdf: 4039070 bytes, checksum: 5f3fa81abaa6c19d365c550dd4b59dbd (MD5) Previous issue date: 2015<br>Resumo: O principal objetivo deste trabalho, foi desenvolver uma metodologia para identificar impacto em placas laminadas de materiais compósitos, a fim de reduzir o tempo de inspeção e assim otimizar o intervalo de inspeção para uma determinada estrutura, j

APA, Harvard, Vancouver, ISO, and other styles

19

Palmer, Hilary R. "Bottle water storage location and its impact on microbiogical quality." Honors in the Major Thesis, University of Central Florida, 2009. http://digital.library.ucf.edu/cdm/ref/collection/ETH/id/1304.

Full text

Abstract:

This item is only available in print in the UCF Libraries. If this is your Honors Thesis, you can help us make it available online for use by researchers around the world by following the instructions on the distribution consent form at http://library.ucf.edu/Systems/DigitalInitiatives/DigitalCollections/InternetDistributionConsentAgreementForm.pdf You may also contact the project coordinator, Kerri Bottorff, at kerri.bottorff@ucf.edu for more information.<br>Bachelors<br>Engineering and Computer Science<br>Environmental Engineering

APA, Harvard, Vancouver, ISO, and other styles

20

Tourancheau, Sylvain. "Caractérisation objective et modélisation psychovisuelle du flou de mouvement sur les écrans à cristaux liquides - Impact sur la qualité perçue." Phd thesis, Université de Nantes, 2009. http://tel.archives-ouvertes.fr/tel-00458786.

Full text

Abstract:

La « haute-définition » a connu un essor important ces dernières années dans les domaines multimédia (télévision, jeux vidéo, etc.). Cependant, pour que l'observateur bénéficie pleinement de cette amélioration de la qualité d'usage, l'augmentation de la résolution spatiale des images affichées doit être accompagnée d'une augmentation de la taille de l'écran. Les écrans à tube cathodique (CRT), lourds et encombrants, ont donc progressivement laissé la place à de nouvelles technologies d'affichage, caractérisées par leur écran plat. Les écrans à cristaux liquides (LCD), leaders sur le marché des

APA, Harvard, Vancouver, ISO, and other styles

21

Grandjean, Julien. "Influence des défauts de forme sur les performances d'assemblages : application aux prothèses totales de hanche." Phd thesis, Université de Grenoble, 2013. http://tel.archives-ouvertes.fr/tel-00944735.

Full text

Abstract:

La performance des mécanismes est intimement liée à la précision des surfaces qui composent les liaisons. La démarche habituelle de l'analyse de ces surfaces est basée sur des hypothèses fortes concernant leurs comportements. Ainsi, les défauts de forme et de rugosité sont négligés et les surfaces sont supposées infiniment rigides. L'objectif principal de ces travaux est de développer une méthode permettant d'étudier l'influence des défauts de forme sur les performances des assemblages. Elle repose sur une méthodologie et des outils pour l'identification des défauts qui vont optimiser ou pénal

APA, Harvard, Vancouver, ISO, and other styles

22

Smith, James Pope. "Hypervelocity impact on strain-rate sensitive shielded plates." Thesis, 1993. http://hdl.handle.net/1911/13785.

Full text

Abstract:

A ballistic limit equation for hypervelocity impact on thin plates is derived analytically. This equation applies to cases of impulsive impact on a plate that is protected by a multi-shock shield, and is valid in the range of velocity above 6 km/s. Experimental tests were conducted at the NASA Johnson Space Center on square aluminum plates. Comparing the center deflections of these plates with the theoretical deflections of a rigid-plastic plate subjected to a blast load, one determines the dynamic yield strength of the plate material. The analysis is based on a theory for the expansion of the

APA, Harvard, Vancouver, ISO, and other styles

23

Raguraman, M. "Advanced Methodologies For Designing Metallic Armour Plates For Ballistic Impact." Thesis, 2007. http://hdl.handle.net/2005/603.

Full text

Abstract:

A Primary objective of the present research is the development of robust CAE (Computer-Aided Engineering)-based approaches for designing armour plates subjected to ballistic impact by small-calibre hardened peojectiles with or without a protective sheath. Amongst the challenges in simulation is the capturing of target plate material behaviour at high strain rates with possibilities of adiabatic heating. A comprehensive numerical study carried out has resulted in the identification of simulation guidelines using a commercially available explicit finite element anlaysis solver (viz. LS_DYNA). Th

APA, Harvard, Vancouver, ISO, and other styles

24

Whitney, James Pliny III. "A method to determine the ballistic limits of shielded plates subjected to hypervelocity impact." Thesis, 1992. http://hdl.handle.net/1911/13659.

Full text

Abstract:

Ballistic limit curves are determined by using experimental and theoretical results for the permanent deformation of a plate subjected to an impact load. The experiments have been performed on shielded plates of various thicknesses and materials at the Hypervelocity Impact Research Laboratory of NASA JSC. Comparison of the theoretical and experimental deformations allows one to determine the dynamic yield strength of the plate material. It is assumed that the shields can be replaced by a single equivalent shield, and that the debris cloud produced by the impact expands according to the theory

APA, Harvard, Vancouver, ISO, and other styles

25

Lakshmanan, P. "Studies on Glass Fiber-Reinforced Composites for CAE-Driven Design of Impact Safety Countermeasures." Thesis, 2014. http://hdl.handle.net/2005/3039.

Full text

Abstract:

Man-made materials such as fiber-reinforced composites (FRCs) can be tailored for optimum performance in product design applications in terms of strength and weight. The current work is aimed at studying the behaviors of composite laminates based on E-glass CSM (Chopped Strand Mat) or WRM (Woven Roving Mat) plies with a polyester resin for impact protection applications. Detailed mechanical characterization of CSM and WRM laminates till failure is carried out for tensile, compressive and shear loads by varying manufacturing process, number of plies, and laminate thickness. The effect of fiber

APA, Harvard, Vancouver, ISO, and other styles

We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!