Relevant bibliographies by topics / Spraying liquid

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Books
  4. Book chapters
  5. Conference papers
  6. Reports

Academic literature on the topic 'Spraying liquid'

Author: Grafiati
Published: 28 May 2022
Last updated: 31 July 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Spraying liquid.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Spraying liquid"

1

Tikkanen, J., V. Pitkänen, J. Larjo, et al. "Liquid flame spraying." Journal of Aerosol Science 26 (September 1995): S229—S230. http://dx.doi.org/10.1016/0021-8502(95)97022-7.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Decaro, Ricardo Augusto, Sergio Tadeu Decaro Junior, and Marcelo da Costa Ferreira. "Deposit of pesticides without and with adjuvants on citrus seedlings following different intervals of artificial rain." Ciência Rural 46, no. 1 (2016): 13–19. http://dx.doi.org/10.1590/0103-8478cr20150064.

Full text
Abstract:
ABSTRACT: For a crop protection product to achieve its goal, the product must be applied and remain on the leaves until it is absorbed. This situation may be compromised due to rainfall after spraying, thus necessitating reapplication which increase the overall cost. Application technology research has focused on alternatives and solutions to mitigate this effect through the use of adjuvants. The objective of this research was to evaluate the deposit of spraying liquid on citrus seedlings using the products spirodiclofen, propargite, imidacloprid, lambda cyhalothrin, copper oxychloride, and co
APA, Harvard, Vancouver, ISO, and other styles
3

Song, Shu Ran, Yao Can Ruan, Zhen Li, Tian Sheng Hong, and Cheng Zhang. "Test Research of Pipeline Spraying Constant Pressure Controlling in Orchard." Advanced Materials Research 308-310 (August 2011): 1162–65. http://dx.doi.org/10.4028/www.scientific.net/amr.308-310.1162.

Full text
Abstract:
The spraying efficiency can be greatly improved by using pipeline spraying in larger orchard, meanwhile, labor strength could be reduced greatly and the pest control efficacy could be improved. Adopting constant pressure control devices can improve the stability of liquid pressure in pipeline, reduce the liquid pressure fluctuation which caused by the changing of spraying nozzles number. The spraying experimentations were carried in orchard by using constant pressure controller. Experimental result indicated that, using the constant pressure control device, the control error was 0.0167Mpa, the
APA, Harvard, Vancouver, ISO, and other styles
4

Neumann, Taylor, Berra Kara, Yasaman Sargolzaeiaval, et al. "Aerosol Spray Deposition of Liquid Metal and Elastomer Coatings for Rapid Processing of Stretchable Electronics." Micromachines 12, no. 2 (2021): 146. http://dx.doi.org/10.3390/mi12020146.

Full text
Abstract:
We report a spray deposition technique for patterning liquid metal alloys to form stretchable conductors, which can then be encapsulated in silicone elastomers via the same spraying procedure. While spraying has been used previously to deposit many materials, including liquid metals, this work focuses on quantifying the spraying process and combining it with silicones. Spraying generates liquid metal microparticles (~5 μm diameter) that pass through openings in a stencil to produce traces with high resolution (~300 µm resolution using stencils from a craft cutter) on a substrate. The spraying
APA, Harvard, Vancouver, ISO, and other styles
5

Rozina, E. Yu. "Capillary Vibrational Spraying of Liquid." International Journal of Fluid Mechanics Research 32, no. 3 (2005): 369–81. http://dx.doi.org/10.1615/interjfluidmechres.v32.i3.90.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Aleksandrov, V. A. "String wave spraying of liquid." Technical Physics Letters 29, no. 5 (2003): 438–40. http://dx.doi.org/10.1134/1.1579819.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Vasilyev, A. A., S. A. Vasilyev, and N. P. Shkilev. "Mechanized spraying of liquid meliorants." IOP Conference Series: Earth and Environmental Science 421 (January 7, 2020): 032026. http://dx.doi.org/10.1088/1755-1315/421/3/032026.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Asano, Kazutoshi. "Electrostatic spraying of liquid pesticide." Journal of Electrostatics 18, no. 1 (1986): 63–81. http://dx.doi.org/10.1016/0304-3886(86)90016-1.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Lei, Han, Ge Li, Fei Wang, Tiejun Chen, Li Ten, and Yong Ding. "An Experimental Study on the Effect of Liquid Concentration on the Atomization Performance of Low-pressure Atomizing Nozzles." Journal of Physics: Conference Series 2383, no. 1 (2022): 012034. http://dx.doi.org/10.1088/1742-6596/2383/1/012034.

Full text
Abstract:
in order to study the phenomenon and mechanism of paint low-pressure atomization spraying and improve the spraying technology, the effect of liquid concentration on the atomization performance of low-pressure atomizer was studied. In this paper, an experimental platform for measuring the spraying of low-pressure atomizing nozzle was built. Mixing the same paint with clean water to obtain liquids of three different concentrations and using them as the mediums respectively, the flow, the atomization angle and the atomization characteristics of low-pressure fine atomizing nozzle with aperture of
APA, Harvard, Vancouver, ISO, and other styles
10

Леонтьев, В. К. "ON THE EFFECTIVENESS OF THE PROCESS OF SPRAYING LIQUID TO PRODUCE LARGE DROPLETS." Южно-Сибирский научный вестник, no. 5(51) (October 31, 2023): 199–201. http://dx.doi.org/10.25699/sssb.2023.51.5.028.

Full text
Abstract:
Распыливание жидкостей применяются во многих отраслях промышленности. Реализуемые на практике в настоящее время способы распыливания жидкостей основаны на использовании различных способов подвода энергии. Выбор способа распыливания определяется назначением процесса, конструкцией аппарата и взаимодействием образующихся капель с другими средами в аппарате, а также затратам энергии на проведение процесса. Основными способами распыливания являются гидравлический и механический. При гидравлическом распыливании основным фактором энергетического воздействия, приводящим к распаду жидкости на капли, яв
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Spraying liquid"

1

Youssef, Rageey M. "Modeling the effect of a spray on a liquid film on a heated surface." Morgantown, W. Va. : [West Virginia University Libraries], 2007. https://eidr.wvu.edu/etd/documentdata.eTD?documentid=5074.

Full text
Abstract:
Thesis (Ph. D.)--West Virginia University, 2007.<br>Title from document title page. Document formatted into pages; contains xv, 136 p. : ill. (some col.). Vita. Includes abstract. Includes bibliographical references (p. 100-105).
APA, Harvard, Vancouver, ISO, and other styles
2

Heising, Raymond. "Effectiveness of pulsed spray combustion for suppression of combustion instabilities." Thesis, Georgia Institute of Technology, 1999. http://hdl.handle.net/1853/16682.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Huneiti, Zayed Ali. "Electrohydrodynamic atomisation of conducting liquid using an AC field superimposed on a DC field." Thesis, Brunel University, 2000. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.327113.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Kushari, Abhijit. "Study of an internally mixed liquid injector for active control of atomization process." Diss., Georgia Institute of Technology, 2000. http://hdl.handle.net/1853/15928.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Reichel, Jonathan R. "Parametric study of liquid fuel jet in crossflow at conditions typical of aerospace applications." Thesis, Atlanta, Ga. : Georgia Institute of Technology, 2008. http://hdl.handle.net/1853/22590.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Ganvir, Ashish. "Microstructure and Thermal Conductivity of Liquid Feedstock Plasma Sprayed Thermal Barrier Coatings." Licentiate thesis, Högskolan Väst, Avd för tillverkningsprocesser, 2016. http://urn.kb.se/resolve?urn=urn:nbn:se:hv:diva-9061.

Full text
Abstract:
Thermal barrier coating (TBC) systems are widely used on gas turbine components to provide thermal insulation and oxidation protection. TBCs, incombination with advanced cooling, can enable the gas turbine to operate at significantly higher temperatures even above the melting temperature of the metallic materials. There is a permanent need mainly of environmental reasons to increase the combustion turbine temperature, hence new TBC solutions are needed.By using a liquid feedstock in thermal spraying, new types of TBCs can be produced. Suspension plasma/flame or solution precursor plasma sprayi
APA, Harvard, Vancouver, ISO, and other styles
7

Cherniak, Leonid Mykhailovych, Леонид Михайлович Черняк, Леонід Михайлович Черняк, О. В. Самков та С. О. Фалько. "Вибір конструкції розпилювача рідини для вихрової камери". Thesis, Видавництво СумДУ, 2008. http://essuir.sumdu.edu.ua/handle/123456789/4214.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Caruyer, Céline. "Modélisation de nanomatériaux injectés par voie liquide dans un jet de plasma pour la fabrication de nanostructures." Thesis, Bordeaux 1, 2011. http://www.theses.fr/2011BOR14329/document.

Full text
Abstract:
Ce travail porte sur l’étude du procédé de projection plasma par voie liquide et en particulier sur l’interaction entre la phase liquide et l’écoulement de plasma. Différents phénomènes physiques ont lieu comme la fragmentation du jet, l’évaporation du liquide et la fusion des particules. La simulation numérique permet de mieux comprendre les phénomènes physiques et vient en appui des expériences qui sont parfois difficiles voire impossibles à réaliser. Un modèle compressible diphasique est développé afin de prendre en compte les effets compressibles du plasma. Des validations sont réalisées s
APA, Harvard, Vancouver, ISO, and other styles
9

Speranza, Antonio. "Electrohydrodynamic spraying of highly conductive and viscous liquids." Thesis, University of Surrey, 2002. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.288774.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Loebker, David W. "Effervescent spraying of high viscosity fluids." Diss., Georgia Institute of Technology, 1998. http://hdl.handle.net/1853/7041.

Full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Books on the topic "Spraying liquid"

1

Berger, Harvey L. Ultrasonic liquid atomization: Theory and application. Partridge Hill Publishers, 1998.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
2

ASTM Subcommittee E29.04 on Liquid Particle Measurement., ed. ASTM standards on liquid particles and sprays. ASTM, 1992.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
3

Technology), International Conference on Liquid Atomization and Spray Systems (5th 1991 National Institute of Standards and. ICLASS-91: Proceedings of the Fifth International Conference on Liquid Atomization and Spray Systems. U.S. Dept. of Commerce, National Institute of Standards and Technology, 1991.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
4

G, Semerjian Hratch, Institute for Liquid Atomization and Spray Systems, and National Institute of Standards and Technology (U.S.), eds. ICLASS-91: Proceedings of the Fifth International Conference on Liquid Atomization and Spray Systems. U.S. Dept. of Commerce, National Institute of Standards and Technology, 1991.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
5

International Conference on Liquid Atomization and Spray Systems (5th 1991 National Institute of Standards and Technology). ICLASS-91: Proceedings of the Fifth International Conference on Liquid Atomization and Spray Systems. Edited by Semerjian Hratch G, Institute for Liquid Atomization and Spray Systems., and National Institute of Standards and Technology (U.S.). U.S. Dept. of Commerce, National Institute of Standards and Technology, 1991.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
6

International Conference on Liquid Atomization and Spray Systems (5th 1991 National Institute of Standards and Technology). ICLASS-91: Proceedings of the Fifth International Conference on Liquid Atomization and Spray Systems. Edited by Semerjian Hratch G, Institute for Liquid Atomization and Spray Systems., and National Institute of Standards and Technology (U.S.). National Institute of Standards and Technology, 1991.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
7

Panneton, Bernard. Ground deposition of liquid droplets released from a point source in the atmospheric surface layer. Institute for Aerospace Studies, 1989.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
8

Panneton, Bernard. Ground deposition of liquid droplets released from a point source in the atmospheric surface layer. University of Toronto, 1988.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
9

1951-, Hirleman E. Dan, Bachalo W. D, Felton Philip G, ASTM Committee E-29 on Particle Size Measurement., ASTM Subcommittee E29.04 on Liquid Particle Measurement., and Symposium on Liquid Particle Size Measurement Techniques (2nd : 1988 : Atlanta, Ga.), eds. Liquid particle size measurement techniques, 2nd volume. ASTM, 1990.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
10

International, Conference on Liquid Atomization and Spray Systems (17th 2001 Zürich Switzerland). ILASS: 2nd-6th September 2001, Zürich : book of abstracts of the Seventeenth International Conference on Liquid Atomization and Spray Systems. I.C. Engines and Combustion Laboratory at ETH, 2001.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Book chapters on the topic "Spraying liquid"

1

Simakov, Nikolay N. "Experimental Study of a Free Two-Phase Flow Generated by Spraying of Water in Air Using a Mechanical Injector." In Liquid Spray from Nozzles. Springer International Publishing, 2019. http://dx.doi.org/10.1007/978-3-030-12446-5_2.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Simakov, Nikolay N. "Introduction: Analysis of the Problems of Modeling of Hydrodynamics and Interphase Heat and Mass Exchange in the Processes with Spraying of Liquid in a Gas." In Liquid Spray from Nozzles. Springer International Publishing, 2019. http://dx.doi.org/10.1007/978-3-030-12446-5_1.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Joshi, S., N. Markocsan, P. Nylén, and G. Sivakumar. "New-Generation Ceramic Coatings for High-Temperature Applications by Liquid Feedstock Plasma Spraying." In Handbook of Advanced Ceramics and Composites. Springer International Publishing, 2020. http://dx.doi.org/10.1007/978-3-030-16347-1_48.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Joshi, S., N. Markocsan, P. Nylén, and G. Sivakumar. "New Generation Ceramic Coatings for High-Temperature Applications by Liquid Feedstock Plasma Spraying." In Handbook of Advanced Ceramics and Composites. Springer International Publishing, 2020. http://dx.doi.org/10.1007/978-3-319-73255-8_48-1.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Duarte, William, Sylvie Rossignol, and Michel Vardelle. "La2 Zr2 07 (LZ) Coatings by Liquid Feedstock Plasma Spraying: the Role of Precursors." In Developments in Strategic Materials and Computational Design V. John Wiley & Sons, Inc., 2015. http://dx.doi.org/10.1002/9781119040293.ch12.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Barannik, I., V. Alexandrov, and I. Komelin. "Casting of Granulated Magnesium and Magnesium Alloys by Centrifugal Spraying of Liquid Metal: Advantages and Limitations." In Magnesium Technology 2000. John Wiley & Sons, Inc., 2013. http://dx.doi.org/10.1002/9781118808962.ch32.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Bock-Seefeld, Benjamin, Patrick Gehre, and Christos G. Aneziris. "Carbon-Bonded Filter Materials and Filter Structures with Active and Reactive Functional Pores for Steel Melt Filtration." In Multifunctional Ceramic Filter Systems for Metal Melt Filtration. Springer International Publishing, 2024. http://dx.doi.org/10.1007/978-3-031-40930-1_1.

Full text
Abstract:
AbstractThere exists an increasing pressure on the metal making and metal using industry to remove solid and liquid inclusions such as deoxidation products, sulfides, nitrides carbides etc. and thereby improve metal cleanliness. It is well known that size, type and distribution of non-metallic inclusions in metal exert considerable effects on the mechanical properties of the cast products. In terms of this contribution a new generation of metal qualities via melt filtration with superior mechanical properties for use in light weight structures and high demand construction materials are explore
APA, Harvard, Vancouver, ISO, and other styles
8

Kleinhans, Agnes, Jewe Schröder, Philipp Stähle, Volker Gaukel, and Heike P. Schuchmann. "Investigation on the Usage of Effervescent Atomization for Spraying and Spray Drying of Rheological Complex Food Liquids and on the Resulting Particle and Product Properties." In Process-Spray. Springer International Publishing, 2016. http://dx.doi.org/10.1007/978-3-319-32370-1_21.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Whiteman, C. David. "Aerial Spraying." In Mountain Meteorology. Oxford University Press, 2000. http://dx.doi.org/10.1093/oso/9780195132717.003.0023.

Full text
Abstract:
Aircraft are used in a number of resource management operations, including fire suppression, seeding and fertilizing operations, and the application of pesticides to agricultural, forest, and rangelands. The objectives of any aerial application are to apply the material, either liquid or solid, to the target area safely, efficaciously, and economically and to avoid drift, that is, off-target displacement of the agents. Barry (1993) is a general reference for aerial spraying of forests. Picot and Kristmanson (1997) provide an overview of all aspects of this topic. Bache and Johnstone (1993) giv
APA, Harvard, Vancouver, ISO, and other styles
10

"Blood, Iron and Body Metals." In The Rhubarb Connection and Other Revelations: The Everyday World of Metal Ions. The Royal Society of Chemistry, 2018. http://dx.doi.org/10.1039/9781788010948-00143.

Full text
Abstract:
Discover here the amazing capacity of lugworm haemoglobin, the blue-blooded horseshoe crab who bucks the trend by instead using haemocyanin, and the beetle who deals with aggressors by spraying 100 °C liquid in their face. With a focus on metals in the body, and those which should be but aren't, find out how these affect fundamental processes including respiration and protein creation.
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Spraying liquid"

1

Marchand, C., C. Chazelas, G. Mariaux, and A. Vardelle. "Liquid Precursor Plasma Spraying: Observation of Liquid Feedstock Break-Up." In ITSC2008, edited by B. R. Marple, M. M. Hyland, Y. C. Lau, C. J. Li, R. S. Lima, and G. Montavon. Verlag für Schweißen und verwandte Verfahren DVS-Verlag GmbH, 2008. http://dx.doi.org/10.31399/asm.cp.itsc2008p0512.

Full text
Abstract:
Abstract The use of liquid precursors in plasma spraying makes it possible to produce coatings with more refined microstructures than in conventional plasma spraying. Depending on the injection device, the liquid feedstock is injected into the plasma jet in the form of liquid jet or droplets. The instabilities on the liquid-gas interface cause the mechanical break-up of liquids into drops that are subjected to further break-up until the droplets reach a stable state or evaporate. The process break-up may strongly influence the size, trajectories and, therefore, treatment of the droplets in the
APA, Harvard, Vancouver, ISO, and other styles
2

Sato, Masayuki, Naomasa Okubo, Takayuki Ohshima, Tomoo Nakane, Bing Sun, and Kuniko Urashima. "Nozzleless EHD Spraying for Fine Droplet Production in Liquid-In-Liquid System." In 2009 IEEE Industry Applications Society Annual Meeting. IEEE, 2009. http://dx.doi.org/10.1109/ias.2009.5324901.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Fauchais, P., and G. Montavon. "Latest Developments in Suspension and Liquid Precursor Thermal Spraying." In ITSC2009, edited by B. R. Marple, M. M. Hyland, Y. C. Lau, C. J. Li, R. S. Lima, and G. Montavon. ASM International, 2009. http://dx.doi.org/10.31399/asm.cp.itsc2009p0136.

Full text
Abstract:
Abstract This review presents recent developments in suspension and solution precursor thermal spraying and demonstrates some of the tools available to characterize plasma-liquid interactions and the coatings produced. It compares and contrasts the two methods with conventional thermal spraying routes and identifies areas needing improvement.
APA, Harvard, Vancouver, ISO, and other styles
4

Evalina, Noorly, Faisal Irsan Pasaribu, Abdul Azis Hutasuhut, and Cholish. "The use of solar power in liquid spraying robots." In PROCEEDINGS OF THE 1ST INTERNATIONAL CONFERENCE ON ARTIFICIAL INTELLIGENCE, ADVANCED MATERIALS, AND MECHATRONICS SYSTEMS: AIAMMS2023. AIP Publishing, 2024. https://doi.org/10.1063/5.0240369.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Bouyer, E., F. Gitzhofer, and M. I. Boulos. "Powder Processing by Suspension Plasma Spraying." In ITSC 1997, edited by C. C. Berndt. ASM International, 1997. http://dx.doi.org/10.31399/asm.cp.itsc1997p0353.

Full text
Abstract:
Abstract Suspension Plasma Spraying (SPS) is a thermal spray process based on a suspension of fine (&amp;lt;10 μm) or even ultrafine (&amp;lt;100 nm) powders which is axially fed into the induction plasma through an atomization probe. The atomization of the suspension results in microdroplets (20 μm in size). They are flash dried in the plasma, melted and finally can impact a substrate to build a coating or be cooled down and collected as a spheroidized powder. The large industrial potential of this technology results first from the use of fine powder or even sol-gel which is one of the starti
APA, Harvard, Vancouver, ISO, and other styles
6

Yang, G. J., C. J. Li, F. Han, and S. F. Mao. "Preparation of TiO2 Photocatalyst by Thermal Spraying with Liquid Feedstock." In ITSC2003, edited by Basil R. Marple and Christian Moreau. ASM International, 2003. http://dx.doi.org/10.31399/asm.cp.itsc2003p0675.

Full text
Abstract:
Abstract TiO2 is the most promising photocatalyst to decompose industrial pollutants in water and air. Compared with TiO2 powder, the immobilized form is more suitable for application. In the present paper, the nanostructured TiO2 photocatalyst is formed by thermal spraying with liquid feedstock. The microstructure of the nanostructured TiO2 is characterized by infrared spectrum, X-ray diffraction, scanning electron microscope, and transmission electron microscope. The photocatalytic performance is characterized with photodegradation of phenol in aqueous solution. The effects of annealing trea
APA, Harvard, Vancouver, ISO, and other styles
7

Mavier, F., V. Rat, M. Bienia, M. Lejeune, and J. F. Coudert. "Study of plasma properties in pulsed plasma spraying of liquid feedstock." In 2016 IEEE International Conference on Plasma Science (ICOPS). IEEE, 2016. http://dx.doi.org/10.1109/plasma.2016.7534394.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Nagai, Niro, Hiroki Onishi, Hitoshi Nikaido, and Yoshihiro Serizawa. "Visual Observation of Liquid-Solid Contact Situations on Superheated Surface Cooled by Liquid Jet or Spraying." In The 15th International Heat Transfer Conference. Begellhouse, 2014. http://dx.doi.org/10.1615/ihtc15.evp.009140.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Gourlaouen, V., F. Remy, B. Hansz, and C. Coddet. "CO2 Cooling in Thermal Spraying." In ITSC 1998, edited by Christian Coddet. ASM International, 1998. http://dx.doi.org/10.31399/asm.cp.itsc1998p1293.

Full text
Abstract:
Abstract Thermal spraying involves high temperatures which can be a serious problem for some applications. Among different possibilities existing to cool down a specimen during spraying, the use of liquid CO2 is one of the most attractive. However, care has to be taken to obtain good results due to the specific characteristics of CO2. Moreover, there are stilt some remaining problems which limit the growth of such system. One of the most important is the condensation of air humidity at the exit of the atomising nozzle. Therefore, a new design of the nozzle has been developed. This design avoid
APA, Harvard, Vancouver, ISO, and other styles
10

Bouyer, E., M. Müller, R. H. Henne, and G. Schiller. "SiC Coating Synthesis by RF Induction Plasma Spraying from Liquid Silane Precursor." In ITSC 2000, edited by Christopher C. Berndt. ASM International, 2000. http://dx.doi.org/10.31399/asm.cp.itsc2000p0919.

Full text
Abstract:
Abstract In this paper a process based on both Thermal Plasma Chemical Vapor Deposition (TPCVD) and Suspension Plasma Spraying (SPS) is applied on r.f. induction thermal plasma for α/β-SiC ceramic synthesis and deposition. The starting materials are low-cost liquid disilanes. The resulting coatings are investigated by means of SEM and XRD. Results on the influence of the processing parameters (i.e. pressure, spray distance, substrate temperature, plasma gas nature and composition, precursor composition, atomization parameters) on the coating phase and microstructure are shown. Control of the m
APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Spraying liquid"

1

Choudhuri, Ahsan, and Norman Love. Design Optimization of Liquid Fueled High Velocity Oxy- Fuel Thermal Spraying Technique for Durable Coating for Fossil Power Systems. Office of Scientific and Technical Information (OSTI), 2016. http://dx.doi.org/10.2172/1356809.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Zilberman, Mark. Installing a Water-Proof Barrier on Low-Cost or Home-Made Masks and Respirators by Spraying them with Aerosols That Protect Clothing from Liquids. Intellectual Archive, 2020. http://dx.doi.org/10.32370/iaj.2303.

Full text
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Spraying liquid' for particular source types:
Journal articles Dissertations / Theses Books
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography