Books on the topic 'Temperature deformation'
Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles
Consult the top 50 books for your research on the topic 'Temperature deformation.'
Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.
You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.
Browse books on a wide variety of disciplines and organise your bibliography correctly.
Zhang, Jun-Shang. High temperature deformation and fracture of materials. Woodhead Pub., 2010.
Find full textZhang, Junshan. High temperature deformation and fracture of materials. Ke xue chu ban she, 2010.
Find full textInternational, Symposium on the Fracture Mechanics of Ceramics (5th 1991 Nagoya Japan). Fracture fundamentals, high-temperature deformation, damage, and design. Plenum Press, 1992.
Find full textSankara, Rao K. Bhanu, and United States. National Aeronautics and Space Administration., eds. Temperature dependent cyclic deformation mechanisms in Haynes 188 superalloy. National Aeronautics and Space Administration, 1995.
Find full textZhi-Yue, Xu, and United States. National Aeronautics and Space Administration., eds. The high temperature creep deformation of SiN-6YO-ZAIO. National Aeronautics and Space Administration, 1988.
Find full textA, Sanders William, and United States. National Aeronautics and Space Administration., eds. High-temperature deformation and microstructural analysis for Si₃N₄-Sc₂O₃. National Aeronautics and Space Administration, 1990.
Find full textIkonen, Kari. Large inelastic deformation analysis of steel pressure vessels at high temperature. Technical Research Centre of Finland, 2001.
Find full textDegenhardt, David. Temperature-dependent Deformation and Fracture Behavior of a Talcum-filled Co-polymer. Springer Fachmedien Wiesbaden, 2020. http://dx.doi.org/10.1007/978-3-658-30155-2.
Full textBradt, R. C. Fracture Mechanics of Ceramics: Fracture Fundamentals, High-Temperature Deformation, Damage, and Design. Springer US, 1992.
Find full textDavid, Nathenson, Prakash Vikas, and NASA Glenn Research Center, eds. Modeling of high-strain-rate deformation, fracture, and impact behavior of advanced gas turbine engine materials at low and elevated temperatures. National Aeronautics and Space Administration, Glenn Research Center, 2003.
Find full textDavid, Nathenson, Prakash Vikas, and NASA Glenn Research Center, eds. Modeling of high-strain-rate deformation, fracture, and impact behavior of advanced gas turbine engine materials at low and elevated temperatures. National Aeronautics and Space Administration, Glenn Research Center, 2003.
Find full textDay, Warren C. Temperature-pressure estimates of dynamically recrystallized rocks in the early Proterozoic Mountain shear zone, northeastern Wisconsin. U.S. G.P.O., 1991.
Find full textW, Smith J., and NASA Glenn Research Center, eds. Microprobe evaluations of grain boundary segregation in KM4 and IN100. National Aeronautics and Space Administration, Glenn Research Center, 2001.
Find full textBlackwell, Paul Leslie. Mechanical property, microstructural and textural development during the high temperature, slow strain rate deformation of Al-Li-Cu-Mg-Zr alloy, AA8090. University of Birmingham, 1995.
Find full textLight Metal Educational Foundation (Osaka, Japan), ed. Report of the Research Group for Study on the deformation and fracture of high strength aluminum alloys with special reference to high temperature. Light Metal Educational Foundation, 1989.
Find full textE, Wilt Thomas, and United States. National Aeronautics and Space Administration., eds. Final technical report for the development of computational techniques for the nonlinear analysis of composite structures at high temperature: NASA grant number, NCC3-248, grant duration, January 13, 1992 to March 1, 1995. Dept. of Mechnical, Industrial and Manufacturing Engineering, University of Toledo, 1996.
Find full textCenter, Langley Research, ed. Micromechanics analysis of space simulated thermal deformations and stresses in continuous fiber reinforced composites. National Aeronautics and Space Administration, Langley Research Center, 1990.
Find full textPachurin, German. Technology for studying the destruction of structural materials under different loading conditions. INFRA-M Academic Publishing LLC., 2021. http://dx.doi.org/10.12737/981296.
Full textSerikov, Sergey. Impact on impact strength. INFRA-M Academic Publishing LLC., 2024. http://dx.doi.org/10.12737/2161513.
Full textMontesano, John. Fatigue of polymer matrix composites at elevated temperatures. Nova Science Publishers, 2011.
Find full textMontesano, John, and John Montesano. Fatigue of polymer matrix composites at elevated temperatures. Nova Science Publishers, 2011.
Find full textJ, Arsenault Richard, and Minerals, Metals & Materials Society., eds. The Johannes Weertman Symposium: Proceedings of a symposium sponsored by the ASM-MSD Flow & Fracture Committee under the Materials Design and Manufacturing Division (MDMD)and the TMS-ASM Nuclear Materials Committee under the Structural Materials Division (SMD) of The Minerals, Metals & Materials Societyheld during the TMS Annual Meeting in Anaheim, California, February 4-8, 1996. The Society, 1996.
Find full textHyer, M. W. Stresses and deformations in cross-ply composite tubes subjected to a uniform temperature change: Elasticity and approximate solutions. Center for Composite Materials and Structures, Virginia Polytechnic Institute and State University, 1985.
Find full textSemenov, Kh N. Dinamika razvitii͡a khrupkikh treshchin i vysokoskorostnoe fotografirovanie. I͡Akutskiĭ nauch. t͡sentr SO RAN, 1993.
Find full textZhang, Jun-Shan. High Temperature Deformation and Fracture of Materials. Elsevier Science & Technology, 2010.
Find full textZhang, Jun-Shan. High temperature deformation and fracture of materials. Woodhead Publishing Limited, 2010. http://dx.doi.org/10.1533/9780857090805.
Full textZhang, Jun-Shan. High Temperature Deformation and Fracture of Materials. Elsevier Science & Technology, 2017.
Find full textFridman, Ya B. Strength and Deformation in Nonuniform Temperature Fields. Springer, 2014.
Find full textCreep and High Temperature Deformation of Metals and Alloys. MDPI, 2019. http://dx.doi.org/10.3390/books978-3-03921-879-0.
Full textTemperature dependent cyclic deformation mechanisms in Haynes 188 superalloy. National Aeronautics and Space Administration, 1995.
Find full textHigh-temperature deformation and microstructural analysis for Si₃N₄-Sc₂O₃. National Aeronautics and Space Administration, 1990.
Find full textHigh-temperature deformation and microstructural analysis for Sib□-s□b3b□-s□sNb□-s□b4b□-s□s-Scb□-s□b2b□-s□sOb□-s□b3b□-s□s. National Aeronautics and Space Administration, 1990.
Find full textDegenhardt, David. Temperature-dependent Deformation and Fracture Behavior of a Talcum-filled Co-polymer. Springer, 2020.
Find full textPoirier, Jean-Paul. Creep of Crystals: High-Temperature Deformation Processes in Metals, Ceramics and Minerals. Cambridge University Press, 2011.
Find full textPoirier, Jean-Paul. Creep of Crystals: High-Temperature Deformation Processes in Metals, Ceramics and Minerals. Cambridge University Press, 2009.
Find full textCreep of crystals: High-temperature deformation processes in metals, ceramics, and minerals. Cambridge University Press, 1985.
Find full textDeformation mechanisms of NiAl cyclicly deformed near the brittle-to-ductile transition temperature. National Aeronautics and Space Administration, 1993.
Find full textSherwood, David John. The effects of strain, strain rate and temperature on deformation-enhanced grain growth. 1991.
Find full textEffect of prior deformation on sensitization development in stainless steel during continuous cooling. Division of Engineering, Office of Nuclear Regulatory Research, U.S. Nuclear Regulatory Commission, 1991.
Find full textModeling of high-strain-rate deformation, fracture, and impact behavior of advanced gas turbine engine materials at low and elevated temperatures. National Aeronautics and Space Administration, Glenn Research Center, 2003.
Find full text(Editor), R. C. Bradt, D.P.H. Hasselman (Editor), D. Munz (Editor), M. Sakai (Editor), and V. Ya Shevchenko (Editor), eds. Fracture Mechanics of Ceramics: Volume 10: Fracture Fundamental High-Temperature Deformation, Damage and Design (Fracture Mechanics of Ceramics). Springer, 1992.
Find full textManson, S. S., and G. R. Halford. Fatigue and Durability of Metals at High Temperatures. ASM International, 2009. http://dx.doi.org/10.31399/asm.tb.fdmht.9781627083430.
Full textBrooks, Charlie R. Principles of the Heat Treatment of Plain Carbon and Low Alloy Steels. ASM International, 1996. http://dx.doi.org/10.31399/asm.tb.phtpclas.9781627083539.
Full textKudinov, V. V., N. V. Korneeva, and I. K. Krylov. Effect of components on the properties of composite materials. Nauka Publishers, 2021. http://dx.doi.org/10.7868/9785020408654.
Full textBauser, M., G. Sauer, and K. Siegert, eds. Extrusion. 2nd ed. Translated by A. F. Castle. ASM International, 2006. http://dx.doi.org/10.31399/asm.tb.ex2.9781627083423.
Full textThe Johannes Weertman symposium: Proceedings of a symposium sponsored by the ASM-MSD Flow & Fracture Committee under the Materials Design and Manufacturing Division (MDMD) and the TMS-ASM Nuclear Materials Committee under the Structural Materials Division (SMD) of The Minerals, Metals & Materials Society held during the TMS Annual Meeting in Anaheim, California, February 4-8, 1996. The Society, 1996.
Find full text(Editor), R. J. Arsenault, D. Cole (Editor), T. Gross (Editor), et al., eds. The Johannes Weertman Symposium. Minerals, Metals, & Materials Society, 1998.
Find full textDetermination of yield and flow surfaces for Inconel 718 under axial-torsional loading at temperatures up to 649 C̊. National Aeronautics and Space Administration, Lewis Research Center, 1998.
Find full text