To see the other types of publications on this topic, follow the link: Temperature deformation.

Journal articles on the topic 'Temperature deformation'

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the top 50 journal articles for your research on the topic 'Temperature deformation.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Browse journal articles on a wide variety of disciplines and organise your bibliography correctly.

1

Utyashev, F. Z., A. V. Botkin, E. P. Volkova, and R. Z. Valiev. "Rational Methods of Plastic Deformation Providing Formation of Ultrafine-Grained Structure in Large-Sized Products." Reviews on Advanced Materials and Technologies 6, no. 1 (2024): 12–23. http://dx.doi.org/10.17586/2687-0568-2024-6-1-12-23.

Full text
Abstract:
Based on the peculiarities of plastic deformation mechanics and physical mesomechanics, the processes are considered and technological schemes for their realization are proposed to ensure the formation of ultrafine-grained structure in axisymmetric products of large sizes. Deformation of coarse-grained materials in temperature-velocity conditions of superplastic deformation and methods of severe plastic deformation are taken as methods of preparation of such a structure. All of these deformations include large strain, and they are carried out at low hydraulic press speeds, but at different tem
APA, Harvard, Vancouver, ISO, and other styles
2

Ma, Xiao, Fu Qiang Wang, and Yuan He. "Simulation of Radial Deformation for Orbiting Scroll Wrap in a Scroll Compressor." Applied Mechanics and Materials 80-81 (July 2011): 969–74. http://dx.doi.org/10.4028/www.scientific.net/amm.80-81.969.

Full text
Abstract:
Based on assumptions and tests of the discharge temperatures land pressures for a scroll compressor, a simulation of radial deformations of the orbiting scroll wrap is performed. All simulations show that the radial deformation of scroll wrap varies complicatedly in outer part. Although the deformations are controlled by the temperature of scroll wrap, the inner pressures of scroll wrap can make the radial deformation more uniform. So reducing temperature difference between the discharge and suction temperatures, using the material with lower thermal expansion coefficient are several effective
APA, Harvard, Vancouver, ISO, and other styles
3

Liu, Tian Wei, Yan Jun Zheng, and Li Shan Cui. "Application Temperature Range of Temperature Memory Effect in Deformed TiNi Alloys." Materials Science Forum 787 (April 2014): 300–306. http://dx.doi.org/10.4028/www.scientific.net/msf.787.300.

Full text
Abstract:
The application temperature range of temperature memory effect (TME) in deformed TiNi alloys was studied in this paper. The TME could be used in a wider temperature range when the specimen cold-rolled in a high deformation. And, the “highest” application temperature of TME could increase with the deformation, and finally rise to 573K with deformed 30%. This temperature no longer changes in higher deformations, while the characteristic of TME still increase with the deformation below 573K. This is due to the dislocation texture and deform-induced martensite structures restrain the reverse marte
APA, Harvard, Vancouver, ISO, and other styles
4

Pop, Mariana, Ioana-Monica Sas-Boca, Dan Frunză, Florin Popa, and Adriana Neag. "The Influence of Hot Deformation on the Mechanical and Structural Properties of 42CrMo4 Steel." Metals 14, no. 6 (2024): 647. http://dx.doi.org/10.3390/met14060647.

Full text
Abstract:
The influence of elevated temperatures and strain rate on the mechanical and structural properties of steel 42CrMo4 were analysed experimentally in this paper. The experiments were based on uniaxial tension and compression tests at high temperatures between 700 °C and 1100 °C and strain rates in the range 0.0018–0.1 s−1. The influence of temperature and strain rate on yield stress, strain to fracture, hardness, structural changes, and fracture characteristics were analysed. The non-uniformity of deformations obtained at different values of the strain rate and temperature were also analysed. An
APA, Harvard, Vancouver, ISO, and other styles
5

Budadin, O. N., W. Yu Kutyurin, A. N. Rykov, and P. I. Gnusin. "MEASUREMENT OF STRAINS IN CARBON-REINFORCED POLYMER COMPOSITE PRODUCTS AT ELEVATED TEMPERATURES USING FIBER-OPTIC SENSORS." Kontrol'. Diagnostika, no. 255 (2019): 14–19. http://dx.doi.org/10.14489/td.2019.09.pp.014-019.

Full text
Abstract:
The main task of the contribution was the estimation of the possibility of using Fiber Bragg Gratings as a mean of measuring the deformation in standard carbon fiber samples at elevated temperatures. The article presents the results of experiments on the measurement of deformations in a carbon sample using Fiber Bragg Gratings on an optical fiber. Deformations were measured in the process of stretching the sample at different temperatures (range from 20 to 140 °C). It is shown that FBGs integrated into the sample material give more stable, reproducible readings, unlike to inlay on the outer su
APA, Harvard, Vancouver, ISO, and other styles
6

Zhao, Yuan Yang, Yun Xia Liu, Qi Chao Yang, Le Wang, and Lian Sheng Li. "Research on Temperature and Deformation Distributions of Scroll Compressor Plates." Applied Mechanics and Materials 331 (July 2013): 157–60. http://dx.doi.org/10.4028/www.scientific.net/amm.331.157.

Full text
Abstract:
When scroll compressors are operated, the heat and force loads acting on scroll plates result in the deformation of them. The temperature distribution and deformations of scroll plates were researched in this paper. The simulation results show that the maximum temperatures of scroll plates are at the center of scroll profiles. And there are the maximum axial deformation values at the center of scroll profiles. The maximum radial and axial fit clearances of compressor are 59.5μm and 38.8μm respectively.
APA, Harvard, Vancouver, ISO, and other styles
7

Yang, Mengmeng, Feng Zhang, and Koji Teramoto. "Statistics-Based Measuring Point Selection for Monitoring the Thermal Deformation of a Workpiece in End-Milling." International Journal of Automation Technology 16, no. 5 (2022): 562–71. http://dx.doi.org/10.20965/ijat.2022.p0562.

Full text
Abstract:
The deformation of the thermal workpiece in the end-milling process has a significant effect on the accuracy of machining. In-process direct measurement of workpiece deformation is difficult because process disturbances occur during machining. On the other hand, local temperatures of the workpiece can be easily and accurately measured using common measuring methods. This study aims to develop a monitoring method for workpiece deformations. A sensor-configured thermal simulation is proposed by combining local temperature measurements with thermal simulations to estimate the thermal states of th
APA, Harvard, Vancouver, ISO, and other styles
8

LAZOUSKI, D., D. GLUKHOV, A. KHATKEVICH, A. HIL, A. KALTUNOU, and E. CHAPARANGANDA. "PRACTICAL MODELING OF THE STRESS-STRAIN STATE OF REINFORCED CONCRETE ELEMENTS UNDER FORCE AND TEMPERATURE INFLUENCES." Herald of Polotsk State University. Series F. Civil engineering. Applied sciences, no. 2 (June 26, 2025): 2–12. https://doi.org/10.52928/2070-1683-2025-41-2-2-12.

Full text
Abstract:
The results of the practical application of a nonlinear deformation calculation model for determining the parame-ters of the stress-strain state, calculating the strength and crack formation force of normal separation using the example of centrally stretched reinforced concrete elements under force and temperature influences are presented. The analysis of studies of the influence of negative temperatures on the parameters of the base points of the diagrams of deformation of concrete and reinforcement of reinforced concrete elements is carried out. Modeling of the stress-strain state using the
APA, Harvard, Vancouver, ISO, and other styles
9

Shterner, Vadim, Ilana Timokhina, Hossein Beladi, and Peter D. Hodgson. "Effect of Temperature on Mechanical Behaviour of High Manganese TWIP Steel." Materials Science Forum 773-774 (November 2013): 257–62. http://dx.doi.org/10.4028/www.scientific.net/msf.773-774.257.

Full text
Abstract:
The aim of the present study was to investigate the role of deformation temperature on the active deformation mechanisms in a 0.6C-18Mn-1.5Al (wt%) TWIP steel. The tensile testing was performed at different temperatures, ranging from ambient to 400°C at a constant strain rate of 10-3s-1. The microstructure characterization was carried out using a scanning electron microscopy. The deformation temperature revealed a significant effect on the active deformation mechanisms (i.e. slip versus twinning), resulting in different microstructure evolution and mechanical properties. At the room temperatur
APA, Harvard, Vancouver, ISO, and other styles
10

Cho, Seungmin, Bongtae Han, and Jinwon Joo. "Temperature Dependent Deformation Analysis of Ceramic Ball Grid Array Package Assembly Under Accelerated Thermal Cycling Condition." Journal of Electronic Packaging 126, no. 1 (2004): 41–47. http://dx.doi.org/10.1115/1.1646426.

Full text
Abstract:
A robust scheme of moire´ interferometry for real-time observation is employed to study the temperature dependent thermo-mechanical behavior of a ceramic ball grid array package assembly. The scheme is implemented with a convection-type environmental chamber that provides the rapid temperature control required in accelerated thermal cycling. Thermal deformations are documented at various temperatures. Thermal-history dependent analyses of global and local deformations are presented. A significant nonlinear global behavior is documented due to complete stress relaxation at the maximum temperatu
APA, Harvard, Vancouver, ISO, and other styles
11

Kiss, Imre, and Vasile Alexa. "Study on Deformation Behavior of Non–Hardenable Austenitic Stainless Steel (Grade X5CrNi18–10) by Hot Torsion Tests." Tehnički glasnik 14, no. 3 (2020): 396–402. http://dx.doi.org/10.31803/tg-20200317151347.

Full text
Abstract:
The steel’s deformation resistance, in which high strain rates have an important influence on the mechanism of failure, might be obtained from a suitably instrumented torsion test. Determination of stainless steel deformability by hot torsion test is the only method that allows obtaining large deformations along the length of the test specimen, so it is mainly used to determine the characteristics at large plastic deformations. By this method, the hot deformability of stainless steel is determined by subjecting to hot torsion the cylindrical stainless steel specimens maintained at the deformat
APA, Harvard, Vancouver, ISO, and other styles
12

MOYSEYCHIK, Eugene A., Alexander E. MOYSEYCHIK, and Alexander A. YAKOVLEV. "VISUALIZATION OF KINETICS OF PLASTIC DEFORMATIONS IN STEEL PRODUCTS BY INFRARED RADIATION." Mechanics of Machines, Mechanisms and Materials 3, no. 68 (2024): 78–87. http://dx.doi.org/10.46864/1995-0470-2024-3-68-78-87.

Full text
Abstract:
The purpose of this article is to identify the possibility of infrared computer thermography for diagnosing the development of plastic deformations of steel products. Methods of conducted experimental studies were published. The results of experiments are presented and analyzed. The possibility of application of infrared computer thermography for research of regularities of origin, propagation and localization of plastic deformation in steel elements during their deformation at room temperatures and after preliminary cooling is substantiated. It is shown that for smooth specimens with distance
APA, Harvard, Vancouver, ISO, and other styles
13

Li, Haitao, Chenxu Li, Dongmei Chen, et al. "Temperature-Dependent Deformation Mechanisms in Ti65 Alloy: An In Situ Tensile Study." Materials 18, no. 14 (2025): 3270. https://doi.org/10.3390/ma18143270.

Full text
Abstract:
Understanding the relationship between deformation behavior and mechanisms at elevated temperatures is of great significance for applications of high-temperature titanium alloys. This study systematically investigates the plastic deformation behavior of Ti65 alloy under both room-temperature and high-temperature conditions through in situ tensile testing, combined with slip trace analysis, crystal orientation analysis, and geometrical compatibility factor evaluation. TEM observations and molecular dynamics simulations reveal that plastic deformation is predominantly accommodated by basal and p
APA, Harvard, Vancouver, ISO, and other styles
14

Zhou, Ge, Lijia Chen, Lirong Liu, Haijian Liu, Heli Peng, and Yiping Zhong. "Low-Temperature Superplasticity and Deformation Mechanism of Ti-6Al-4V Alloy." Materials 11, no. 7 (2018): 1212. http://dx.doi.org/10.3390/ma11071212.

Full text
Abstract:
The low-temperature superplastic tensile behavior and the deformation mechanisms of Ti-6Al-4V alloy are investigated in this paper. Through the experiments carried out, elongation to failure (δ) is calculated and a set of values are derived that subsequently includes the strain rate sensitivity exponent (m), deformation activation energy (Q) at low-temperature superplastic deformation, and the variation of δ, m and Q at different strain rates and temperatures. Microstructures are observed before and after superplastic deformation. The deformation mechanism maps incorporating the density of dis
APA, Harvard, Vancouver, ISO, and other styles
15

Baqeri, Gholam Ali, Chris Killmore, Lachlan Smillie, and Elena Pereloma. "The Effect of the Finishing Deformation Temperature on the Microstructure of CrVNb Micro-Alloyed Steel." Materials 18, no. 14 (2025): 3234. https://doi.org/10.3390/ma18143234.

Full text
Abstract:
This study explored the effects of the finishing deformation temperature on the microstructure and properties of CrVNb micro-alloyed steel following thermomechanical processing (TMP). The investigation encompassed the influence of the deformation temperature on the ferrite grain size, precipitate characteristics, hardness and flow stress. The microstructure characterization was performed using optical and electron microscopy techniques. The results show that decreasing the deformation temperature refined the ferrite grains, though a bimodal ferrite grain structure formed when the deformation t
APA, Harvard, Vancouver, ISO, and other styles
16

Аксенов, Aleksey Aksenov, Малюков, and Sergey Malyukov. "Hardness and deformation of particle board at negative temperatures." Forestry Engineering Journal 4, no. 3 (2014): 184–91. http://dx.doi.org/10.12737/6286.

Full text
Abstract:
The paper discusses the dependence of hardness, temporary and permanent deformations of the elastic compressed wood, the criterion of the relative convergence of the friction surfaces of the temperature, allowing adjusting the estimates of reliability and availability of bear-ings compressed wood at low temperatures. Results of submissions accurately indicate that at low temperatures hardness and elastic deformation of compressed wood increases, and temporary and permanent deformations and criterion of relative approach of the pair of friction surfaces of metal timber decrease.
APA, Harvard, Vancouver, ISO, and other styles
17

Chen, Wen, Peng Zhang, Jing Xie, Yang Liu, and Wenxia Zhao. "The Effect of Nb Content on Microstructure Evolution of GH4169 superalloy During Hot Deformation." MATEC Web of Conferences 358 (2022): 01001. http://dx.doi.org/10.1051/matecconf/202235801001.

Full text
Abstract:
This research conducted a thermal compression deformation test on two GH4169 alloy samples with 5.40wt% and 5.21wt% Nb contents respectively, under deformation temperatures ranging from 900°C to 1030°C and the strain rates of 0.04s-1, 0.08s-1. Data from the deformation test were used to study the effects of deformation temperature and strain rate on the microstructure, δ phase morphology, and δ phase evolution of both alloy samples, so as to reveal the structural evolution mechanism. The results show that the long needle-like δ phase in the alloy microstructure with high Nb content undergoes d
APA, Harvard, Vancouver, ISO, and other styles
18

Tachiya, Hiroshi, Yoshiyuki Kaneko, Teppei Aramoto, Hirotsugu Shinjo, and Yusuke Miyazaki. "Approximation of Thermal Deformation Behaviour of a Machine Tool to Improve its Process Precision." Key Engineering Materials 345-346 (August 2007): 181–84. http://dx.doi.org/10.4028/www.scientific.net/kem.345-346.181.

Full text
Abstract:
This paper presents a stochastic method to approximate the thermal deformation of a machine tool, by using the temperature changes of the body. The method examines the relationship between the thermal deformations and temperature changes of plural positions on a machine tool, and determines the appropriate temperature measuring points. In addition, the approximate equation of the thermal deformation is drawn by t-test, which uses those influential temperature changes as parameters. This study shows that the approximation equation of the thermal deformations can be expressed in a simple form wi
APA, Harvard, Vancouver, ISO, and other styles
19

Wang, Hui, Jiangxiong Liang, Zhiyue Shi, Cunyu Wang, Xiaodan Zhang, and Wenquan Cao. "Tensile deformation-induced twinning in an austenitic low density steel over a wide range of temperature." IOP Conference Series: Materials Science and Engineering 1249, no. 1 (2022): 012011. http://dx.doi.org/10.1088/1757-899x/1249/1/012011.

Full text
Abstract:
Abstract A Fe30Mn11Al1CNbV low-density steel was processed by solid solution treatment and deformed at different temperatures from -196°C to +200°C by tensile testing. It was found that the deformation microstructure is mainly dominated by thin dislocation slip bands during tensile deformation, and deformation twinning was found near grain boundaries at a strain of 0.5, regardless of deformation temperature. The stacking fault energy is calculated by consideration of both chemical composition and the deformation temperature, which is high and normally should not initiate deformation twinning.
APA, Harvard, Vancouver, ISO, and other styles
20

Sun, Lin, K. Muszka, Bradley P. Wynne, and Eric J. Palmiere. "The Effect of Strain Path Reversal during Austenite Deformation on Phase Transformation in a Microalloyed Steel Subjected to Accelerated Cooling." Materials Science Forum 715-716 (April 2012): 667–72. http://dx.doi.org/10.4028/www.scientific.net/msf.715-716.667.

Full text
Abstract:
In the present study, monotonic and cyclical torsional deformations of an X-70 microalloyed steel were conducted at austenite temperatures below the recrystallisation-stop temperature (T5%). The austenite deformation is followed by accelerated continuous cooling to allow the investigation of the strain reversal effect on the subsequent phase transformation mechanisms. The transformation behaviours were studied by a dilatometry method, and the microstructures of the transformed products have been analysed using electron back scatter diffraction (EBSD). The results of this study shows that altho
APA, Harvard, Vancouver, ISO, and other styles
21

Arnauda, Barbara, Ali Akbari-Fakhrabadi, Nina Orlovskaya, Viviana Meruane та Wakako Araki. "Room Temperature Ferroelastic Creep Behavior of Porous (La0.6Sr0.4)0.95Co0.2Fe0.8O3-δ". Processes 8, № 11 (2020): 1346. http://dx.doi.org/10.3390/pr8111346.

Full text
Abstract:
The time-dependent deformation of porous (La0.6Sr0.4)0.95Co0.2Fe0.8O3-δ (LSCF) under constant uniaxial compressive stress at room temperature has been studied. Both axial and lateral stress–strain deformation curves clearly show the non-linear ferroelastic behavior of LSCF perovskite during compression. The ferroelastic characteristics of deformation curves such as coercive stress and apparent loading moduli decrease when the porosity of the samples increases. Ferroelastic creep deformations at applied stresses of 25 and 50 MPa demonstrate that stress and porosity are influencing factors on cr
APA, Harvard, Vancouver, ISO, and other styles
22

AKSENOV, I. S. "DEFORMATION STABILITY OF PVC WINDOWS UNDER TEMPERATURE LOADS." Building and reconstruction 108, no. 4 (2023): 5–18. http://dx.doi.org/10.33979/2073-7416-2023-108-4-5-18.

Full text
Abstract:
Experience in operating PVC windows in the climatic conditions of the Russian Federation shows that they are subject to significant temperature deformation. Temperature deformations of PVC windows lead to a decrease in their operational and technical characteristics. Nevertheless, at present the calculation of these structures for the action of temperature loads is not performed. This is due, among other things, to the fact that the methods for calculating the plastic deformation of PVC windows under the action of temperature loads have not yet been developed. The development of this methodolo
APA, Harvard, Vancouver, ISO, and other styles
23

Towfighi, Siyavash, and Douglas P. Romilly. "A thermo-structural manufacturing process using AISI 304L stainless steel." Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 231, no. 2 (2016): 209–16. http://dx.doi.org/10.1177/0954405415573851.

Full text
Abstract:
This article presents a study of high-temperature heating of AISI 304L stainless steel to induce deformations in a manufactured part. Small square samples of AISI 304L were heated to deform a slot using an oxy-acetylene torch. The sample temperature profiles were measured using three thermocouples with maximum temperature values ranging from 760 °C to 1130 °C. Three-dimensional thermo-structural finite element models were created to predict the magnitude of permanent deformation and were validated experimentally. Torch modeling parameters were optimized numerically using a series of finite ele
APA, Harvard, Vancouver, ISO, and other styles
24

Zhou, Qing Chun, Hai Bo Li, and Chun He Yang. "Experimental Study on Elastic-Plastic Behavior of a Sandstone under Ground Temperature." Key Engineering Materials 340-341 (June 2007): 1151–56. http://dx.doi.org/10.4028/www.scientific.net/kem.340-341.1151.

Full text
Abstract:
The mechanical properties of rock under high temperature and high geostress are the basic and important information to assess the safety of underground engineering. Based on the environmental conditions of the west route of south-to-north water transfer project in western China, experiments are conducted for a sandstone. The experiments are conducted in stress path of hydrostate, pure shear, and conventional triaxial compression at the temperature of 25°C, 50°C and 70°C. The change of strength and average moduli of the rock with temperatures are studied. By cycle loading and unloading tests, e
APA, Harvard, Vancouver, ISO, and other styles
25

Despax, Laurie, Vanessa Vidal, Denis Delagnes, Moukrane Dehmas, Hiroaki Matsumoto, and Vincent Velay. "Mechanical behaviour and microstructural evolution in fine grain Ti-6Al-4V alloy under superplastic conditions." MATEC Web of Conferences 321 (2020): 11011. http://dx.doi.org/10.1051/matecconf/202032111011.

Full text
Abstract:
Ti-6Al-4V is able to support high level of deformations like superplastic deformation for aeronautical structural applications. However, the applied temperature during forming induces changes in phase fraction, which may have an impact on the mechanisms of deformation involved and the final part. Mechanisms described in the literature, like dislocation glide, diffusional creep, Grain Boundary Sliding (GBS) accommodated by dislocation or diffusion, are still controversial as there are mainly based on post mortem analysis or on stress-strain data. The purpose of this work was to combine interrup
APA, Harvard, Vancouver, ISO, and other styles
26

Zhang, Y. "EBSD analysis of graphitized steel microstructure after compression deformation at room temperature." Izvestiya. Ferrous Metallurgy 64, no. 3 (2021): 230–36. http://dx.doi.org/10.17073/0368-0797-2021-3-230-236.

Full text
Abstract:
The graphitized steel has attracted considerable attention due to its excellent cutability and good properties at cold forming. Compression deformation at room temperature of graphitized steel (0.43 % C) with a ferrite-graphite microstructure was performed on a universal testing machine. Microstructures of deformed samples were studied using the analysis technique of Electron Back-Scattered Diffraction (EBSD). The evolution of microstructure morphology, texture, distribution of Kernel Average Misorintations (KAM) and the Taylor factor in the zone of large deformations of deformed samples with
APA, Harvard, Vancouver, ISO, and other styles
27

Csepeli, Zsolt, Péter Bereczki, Balázs Verő, Ibolya Kardos, and Péter János Szabó. "Investigation of the Effect of Deformation Stored Energy on the Allotropic Transformation Temperature." Materials Science Forum 812 (February 2015): 23–28. http://dx.doi.org/10.4028/www.scientific.net/msf.812.23.

Full text
Abstract:
The aim of our investigation was to study the effect of deformation on the start temperature of the austenite-ferrite transformation. The deformation was carried out during cooling before the beginning of the transformation. The transformation start temperature was determined by dilatometric measurement with a Gleeble 3800 thermomechanical simulator. A novel method was developed to study the deformation induced ferrite transformation (DIFT) effect and successful experiments were carried out on S460MC grade steel specimens to determine the effect of the deformation stored energy on the transfor
APA, Harvard, Vancouver, ISO, and other styles
28

Zhou, Ying, Xiao-Min Chen, and Shengfeng Qin. "A Strain-Compensated Constitutive Model for Describing the Hot Compressive Deformation Behaviors of an Aged Inconel 718 Superalloy." High Temperature Materials and Processes 38, no. 2019 (2019): 436–43. http://dx.doi.org/10.1515/htmp-2018-0108.

Full text
Abstract:
AbstractThe hot deformation behaviors of an aged Inconel 718 superalloy are investigated by isothermal compression experiments at four strain rates and five deformation temperatures on a Gleeble-3500 thermo-mechanical simulator. The experimental results show that the true stresses are obviously affected by strain rate and deformation temperature. The true stress increases rapidly at the beginning of hot compressive deformation, which ascribes to the intense work hardening. The true stresses at high deformation temperatures are lower than those at lower deformation temperatures. The dynamic sof
APA, Harvard, Vancouver, ISO, and other styles
29

Bruni, Carlo. "Modelling of Flow Behaviour of Magnesium Alloys." Key Engineering Materials 716 (October 2016): 360–67. http://dx.doi.org/10.4028/www.scientific.net/kem.716.360.

Full text
Abstract:
The present investigation aims at studying the flow behaviour of magnesium alloys under different conditions in terms of temperature, deformation velocities and deformation. The modelling approach was based on a proposed equation to model the shape of each flow curve through different variables. The modelled flow curves were subsequently compared with those obtained with experiments. The models were validated on flow curves not used in the building stage. It was observed that, for low temperature values, high deformation velocities and deformations the final part of the flow curve has to be ad
APA, Harvard, Vancouver, ISO, and other styles
30

Zhan, Guo-Dong, Mamoru Mitomo, Rong-Jun Xie, and Keiji Kurashima. "Ductile-to-brittle Transition in Superplastic Silicon Nitride Ceramics." Journal of Materials Research 17, no. 1 (2002): 149–55. http://dx.doi.org/10.1557/jmr.2002.0023.

Full text
Abstract:
The ductile-to-brittle transition was observed in a superplastic silicon nitride nanoceramic. This transition depends on strain rates and deformation temperatures. Generally, the material exhibits ductility at low strain rates and high deformation temperatures. At 1600 °C, the material is brittle when the strain rates are higher than 10−3/s. At a fixed strain rate of 10−3/s, the material exhibits brittleness when the temperatures are lower than 1550 °C. Moreover, critical strain rate for the brittle to ductile transition depends on deformation temperature. The critical strain rates increase wi
APA, Harvard, Vancouver, ISO, and other styles
31

Karmarkar, Aditya P., Xiaopeng Xu, and Karim El-Sayed. "Temperature and Process Dependent Material Characterization and Multiscale Stress Evolution Analysis for Performance and Reliability Management under Chip Package Interaction." International Symposium on Microelectronics 2017, no. 1 (2017): 000013–24. http://dx.doi.org/10.4071/isom-2017-tp13_051.

Full text
Abstract:
Abstract Distinct temperature and process dependent deformation behaviors under packaging temperature cycles are characterized for various packaging materials. Substrate and underfill deformations are described using Maxwell viscoelasticity model. Solder bump deformation is represented by incremental plasticity model. Anisotropic deformation in silicon and orthotropic deformation in substrate are also considered. The material deformation effects on stress evolutions during fabrication and under chip package interaction (CPI) are analyzed for a large package structure. Complex geometries spread
APA, Harvard, Vancouver, ISO, and other styles
32

Yofianti, Desy. "Deformasi Permanen dan Modulus Resilien Campuran AC-BC Modified Menggunakan Aspal Multigrade." BENTANG : Jurnal Teoritis dan Terapan Bidang Rekayasa Sipil 7, no. 2 (2019): 60–68. http://dx.doi.org/10.33558/bentang.v7i2.1748.

Full text
Abstract:
Multigrade asphalt use is an alternative method for handling road deterioration problem, e.g. a rutting, due to the repetitive traffic load and high pressure from vehicle wheels. In addition, the multigrade asphalt has been widely used to reduce temperature sensitivity of the asphalt mixture in flexible pavement due to an unpredictable climate change. Rutting is also caused by the accumulation of permanent deformations from all layers in the pavement structure. This study aims to analyze the permanent deformation value and the resilient modulus of an Asphalt Concrete Binder Course (AC-BC) modi
APA, Harvard, Vancouver, ISO, and other styles
33

Malik, Abdul, Umer Masood Chaudry, Kotiba Hamad, and Tea-Sung Jun. "Microstructure Features and Superplasticity of Extruded, Rolled and SPD-Processed Magnesium Alloys: A Short Review." Metals 11, no. 11 (2021): 1766. http://dx.doi.org/10.3390/met11111766.

Full text
Abstract:
In this study, an overview of microstructure features such as grain size, grain structure, texture and its impact on strain rate sensitivity, strain hardening index, activation energy and thermal stability for achieving superplasticity of Mg alloys are presented. The deformation behavior under different strain rates and temperatures was also elaborated. For high elongation to fracture grain boundary sliding, grain boundary diffusion is the dominant deformation mechanism. In contrast, for low-temperature and high strain rate superplasticity, grain boundary sliding and solute drag creep mechanis
APA, Harvard, Vancouver, ISO, and other styles
34

Vilette, Anne, and S. L. Kampe. "High-temperature plasticity of cubic bismuth oxide." Journal of Materials Research 11, no. 6 (1996): 1433–39. http://dx.doi.org/10.1557/jmr.1996.0180.

Full text
Abstract:
Cubic (δ) bismuth oxide (Bi2O3) has been subjected to high temperature deformation over a wide range of temperatures and strain rates. Results indicate that bismuth oxide is essentially incapable of plastic deformation at temperatures below the monoclithic to cubic phase transformation which occurs at approximately 730 °C. Above the transformation temperature, however, Bi2O3 is extensively deformable. The variability of flow stress to temperature and strain rate has been quantified through the determination of phenomenological-based constitutive equations to describe its behavior at these high
APA, Harvard, Vancouver, ISO, and other styles
35

Sultan, Alsagabi, Alqahtani Mohammed, and Alajlan Abdulaziz. "THE ELEVATED TEMPERATURE DEFORMATION OF G115 STEEL AND THE ASSOCIATED DEFORMATION MECHANISM." ELEVATED TEMPERATURE DEFORMATION OF G115 STEEL AND THE ASSOCIATED DEFORMATION MECHANISM 7 (January 1, 2018): 7. https://doi.org/10.5281/zenodo.3984835.

Full text
Abstract:
The next Generation-IV reactors need to be stand for a very high temperature. Structural materials have to resist that temperature; otherwise, damages could appear. G115 steel is a candidate structural material which has been considered in this work. The hot deformation behavior of G115 steel was carried out at elevated temperatures 500, 550 and 600°C with different strain rates ranging from 1x10-5 to 1x10-3 s-1. To derive the hot deformation constitutive equation, the universal hyperbolic-sine Arrhenius-type equation was utilized considering the ultimate stresses values for each condition
APA, Harvard, Vancouver, ISO, and other styles
36

Goodman, Alan L. "Temperature-induced deformation inSm148." Physical Review C 33, no. 6 (1986): 2212–14. http://dx.doi.org/10.1103/physrevc.33.2212.

Full text
APA, Harvard, Vancouver, ISO, and other styles
37

Gottstein, G., T. Lee, and U. Schmidt. "Deformation temperature and recrystallization." Materials Science and Engineering: A 114 (July 1989): 21–28. http://dx.doi.org/10.1016/0921-5093(89)90841-1.

Full text
APA, Harvard, Vancouver, ISO, and other styles
38

Isaev, N. V., V. V. Pustovalov, V. S. Fomenko, and S. È. Shumilin. "Plasticity of Al-Li alloys in the temperature range 0.5-300 K: Low-temperature anomalies, deformation instability and the effect of superconducting transition." Low Temperature Physics 20, no. 8 (1994): 653–59. https://doi.org/10.1063/10.0033693.

Full text
Abstract:
Plastic deformation of binary alloys Al+3.8, 7.0, or 10.4 at. % Li is studied under conditions of extension at a constant rate at temperatures down to 0.5 K. The temperature dependences of the plasticity parameters are studied, low-temperature singularities of these dependences are established, and their origin is discussed. In the temperature interval 4.2–0.5 K, the effect of the degree of deformation, temperature, and superconducting transition on the jumpwise deformation of alloys is studied. A qualitative comparison is made between the experimental data and the prevailing theories of therm
APA, Harvard, Vancouver, ISO, and other styles
39

Zhang, Xin, and Yi Xiong. "Study on Thermal Deformation Behavior of Cu-P Weathering Steel." Materials Science Forum 704-705 (December 2011): 124–28. http://dx.doi.org/10.4028/www.scientific.net/msf.704-705.124.

Full text
Abstract:
Using thermal simulator (Gleeble 1500D), the thermal deformation behavior of Cu-P weathering steel containing Cr, Ni, Mo under the conditions of various deformation temperatures and strain rates was studied. The true stress-true strain curves at various thermal deformation conditions were got, and the thermal deformation equation was established. Then the microstructure features of the steel under various deformation temperatures and strain rates were analyzed when the true strains were same. The results show that with the same strains and strain rates, the higher the deformation temperature,
APA, Harvard, Vancouver, ISO, and other styles
40

Wang, Hui, Ziyuan Gao, Zhiyue Shi, et al. "High Temperature Deformation Behavior and Microstructure Evolution of Low-Density Steel Fe30Mn11Al1C Micro-Alloyed with Nb and V." Materials 14, no. 21 (2021): 6555. http://dx.doi.org/10.3390/ma14216555.

Full text
Abstract:
The thermal processing parameters is very important to the hot rolling and forging process for producing grain refinement in lightweight high-manganese and aluminum steels. In this work, the high temperature deformation behaviors of a low-density steel of Fe30Mn11Al1C alloyed with 0.1Nb and 0.1V were studied by isothermal hot compression tests at temperatures of 850–1150 °C and strain rates between 0.01 s−1 and 10 s−1. It was found that the flow stress constitutive model could be effectively established by the Arrhenius based hyperbolic sine equation with an activation energy of about 389.1 kJ
APA, Harvard, Vancouver, ISO, and other styles
41

RADIONOVA, L. V., and R. A. LISOVSKII. "STUDY OF DEFORMATION AND CONTACT HEATING OF WIRE DURING THE HIGH-SPEED DRAWING PROCESS IN A MONOLITHIC DIE." Ferrous Metallurgy. Bulletin of Scientific , Technical and Economic Information 78, no. 9 (2022): 784–92. http://dx.doi.org/10.32339/0135-5910-2022-9-784-792.

Full text
Abstract:
This article presents the results of analytical studies of the deformation and contact heating of the wire, depending on the drawing technological parameters. The analysis was carried out by the calculation method and the computer simulation method in the QForm package based on the finite element method. The increase in the temperature of the wire during drawing in a monolithic die consists of deformational heating and heating caused by sliding friction on the “wire – die” surface. In the course of the research, it was found that the half-angle of the die has an effect on the uniformity of the
APA, Harvard, Vancouver, ISO, and other styles
42

Gautam, Sachin, and Ravindra Saxena. "A finite element study on effect of frictional heating in the taylor rod impact problem." World Journal of Engineering 11, no. 6 (2014): 529–42. http://dx.doi.org/10.1260/1708-5284.11.6.529.

Full text
Abstract:
In an impact phenomenon the material is subjected to very short duration high force levels resulting large plastic deformations and rise in temperature at high strain rates. A circular rod impacting against a rigid surface called as Taylor rod impact test is widely used for determining the mechanical behaviour of materials subjected to high strain rates with associated increase in temperature. A three-dimensional large deformation, thermo-elasto-plastic, dynamic, contact, finite element formulation is developed to study the effect of temperature rise due to plastic deformation and surface fric
APA, Harvard, Vancouver, ISO, and other styles
43

Jia, Xiang-Dong, Yi-Ning Wang, Ying Zhou, and Miao-Yan Cao. "The Study on Forming Property at High Temperature and Processing Map of 2219 Aluminum Alloy." Metals 11, no. 1 (2021): 77. http://dx.doi.org/10.3390/met11010077.

Full text
Abstract:
2219 aluminum alloy is a kind of high-strength Al-Cu-Mn alloy that can be strengthened by heat treatment. Its mechanical property parameters and forming properties are greatly affected by the deformation rate, temperature and strain. Taking 2219 aluminum alloy extruded bar as the research object, the Gleeble-3500 thermomechanical simulator was used to analyze the thermal compression deformation behavior of 2219 aluminum alloy under different temperatures and strain rates. The results show that the deformation behavior of 2219 aluminum alloy under high temperatures is greatly influenced by the
APA, Harvard, Vancouver, ISO, and other styles
44

Derkach, M. A., V. A. Sheremetev, A. V. Korotitskiy, and S. D. Prokoshkin. "STUDY OF LOW-TEMPERATURE THERMOMECHANICAL BEHAVIOR OF THE Ti-18Zr-15Nb SUPERELASTIC ALLOY UNDER DIFFERENT TEMPERATURE-RATE CONDITIONS." Физика металлов и металловедение 124, no. 9 (2023): 873–83. http://dx.doi.org/10.31857/s0015323023601216.

Full text
Abstract:
The biomedical alloy Ti-18Zr-15Nb (at.%) with shape memory was subjected to a true deformation e = 0.7 in three different modes: in the temperature range from 20°C to 600°C at deformation rate ξ = 0. 1 s-1; at temperatures 250°C and 300°C with strain rates ξ = 0.1, 1 and 10 s-1; deformation at 300°C and strain rate ξ = 0.1 s-1 after annealing at 300°C (τ = 10, 60, 300, 600 and 1200 s). It is established that with increasing temperature the conditional yield strength σ0.2 continuously decreases, at that in the temperature range of deformation temperatures 250°С-300°С the increase of maximum str
APA, Harvard, Vancouver, ISO, and other styles
45

Shimizu, Ichiro. "Temperature Dependent Plastic Deformation Behavior of AZ31 Magnesium Alloy in Uniaxial and Biaxial Compressions." Key Engineering Materials 725 (December 2016): 421–26. http://dx.doi.org/10.4028/www.scientific.net/kem.725.421.

Full text
Abstract:
Metal forming of magnesium alloys often performed at elevated temperature, because magnesium alloys exhibit peculiar stress-strain relation and inferior ductility compared to conventional metals at room temperature. In the present study, deformation behavior and formability of cast and extruded AZ31 magnesium alloys under uniaxial and biaxial compressions at room temperature and at elevated temperatures were investigated. The results revealed that the compressive stress-strain relation of AZ31 magnesium alloy changed not only with the initial texture but also with the deformation temperature.
APA, Harvard, Vancouver, ISO, and other styles
46

Al-Samman, Talal, and Günter Gottstein. "Deformation Conditions and Stability of the Basal Texture in Magnesium." Materials Science Forum 539-543 (March 2007): 3401–6. http://dx.doi.org/10.4028/www.scientific.net/msf.539-543.3401.

Full text
Abstract:
Texture evolution and microstructure development of hot extruded pure magnesium and the magnesium alloy AZ31 deformed by plane strain deformation at select temperatures and strain rates were investigated using X-ray techniques, electron back scattered diffraction (EBSD) and optical microscopy. At a deformation temperature of 200 °C both materials showed a heterogeneous microstructure consisting of highly deformed zones appearing as huge grains or bands and of very small (~ 3 μm) grains. High temperature deformation (400 °C) gave rise to completely different microstructures. Changing of deforma
APA, Harvard, Vancouver, ISO, and other styles
47

Zhao, P., D. G. Morris, and M. A. Morris Munoz. "Forging, textures, and deformation systems in a B2 FeAl alloy." Journal of Materials Research 14, no. 3 (1999): 715–28. http://dx.doi.org/10.1557/jmr.1999.0097.

Full text
Abstract:
High-temperature forging experiments have been carried out by axial compression testing on a Fe–41Al–2Cr alloy in order to determine the deformation systems operating under such high-speed, high-temperature conditions, and to examine the textures produced by such deformation and during subsequent annealing to recrystallize. Deformation is deduced to take place by the operation of 〈111〉 {110} and 〈111〉{112} slip systems at low temperatures and by 〈100〉{001} and 〈100〉{011} slip systems at high temperatures, with the formation of the expected strong 〈111〉 textures. The examination of the weak 〈10
APA, Harvard, Vancouver, ISO, and other styles
48

Aksenov, Ivan, and Aleksandr Konstantinov. "TEMPERATURE DEFORMATIONS OF PVC WINDOW PROFILES WITH REINFORCEMENT." International Journal for Computational Civil and Structural Engineering 18, no. 2 (2022): 98–111. http://dx.doi.org/10.22337/2587-9618-2022-18-2-98-111.

Full text
Abstract:
Modern window structures made of PVC profiles can experience significant temperature deformation during both winter and summer operation. This effect is not considered in the current engineering methods of PVC windows calculation, which causes a number of problems in their operation (freezing and blowing through the windows, the failure of fittings, etc.). The use of laboratory methods of testing windows for temperature loads is limited due to their labor intensity and the high cost of testing equipment. We propose to develop an engineering method for calculating the mechanical operation of PV
APA, Harvard, Vancouver, ISO, and other styles
49

El Batal, Omar, Wael Abuzaid, Mehmet Egilmez, Maen Alkhader, Luca Patriarca, and Riccardo Casati. "Deformation Rate and Temperature Sensitivity in TWIP/TRIP VCrFeCoNi Multi-Principal Element Alloy." Metals 12, no. 9 (2022): 1510. http://dx.doi.org/10.3390/met12091510.

Full text
Abstract:
High-entropy alloys (HEAs) and medium-entropy alloys (MEAs), also sometimes referred to as multi-principal element alloys (MPEAs), present opportunities to develop new materials with outstanding mechanical properties. Through the careful selection of constituent elements along with optimized thermal processing for proper control of structure, grain size, and deformation mechanisms, many of the newly developed HEA systems exhibit superior strength and ductility levels across a wide range of temperatures, particularly at cryogenic deformation temperatures. Such a remarkable response has been att
APA, Harvard, Vancouver, ISO, and other styles
50

Liu, Zhangquan, Xiaohui Shi, Min Zhang, and Junwei Qiao. "High-Temperature Mechanical Properties of NbTaHfTiZrV0.5 Refractory High-Entropy Alloys." Entropy 25, no. 8 (2023): 1124. http://dx.doi.org/10.3390/e25081124.

Full text
Abstract:
The NbTaHfTiZrV0.5 is a refractory multi-principal-element alloy with high strength and good ductility at room temperature. It is important for possible high-temperature applications to investigate the deformation mechanism of the NbTaHfTiZrV0.5 alloy at different temperatures using tensile tests. In this investigation, the tensile tests were conducted at room temperature to 1273 K on sheet materials fabricated by cold rolling combined with annealing treatments. At 473 K, the NbTaHfTiZrV0.5 alloy exhibited a high tensile ductility (12%). At a testing temperature range of 673~873 K, the ductili
APA, Harvard, Vancouver, ISO, and other styles
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!