Log in

Relevant bibliographies by topics / Temperature deformation / Dissertations / Theses

To see the other types of publications on this topic, follow the link: Temperature deformation.

Dissertations / Theses on the topic 'Temperature deformation'

Author: Grafiati

Published: 28 May 2022

Last updated: 30 July 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the top 50 dissertations / theses for your research on the topic 'Temperature deformation.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Browse dissertations / theses on a wide variety of disciplines and organise your bibliography correctly.

1

Heczko, Milan. "High Temperature Deformation Mechanisms." Doctoral thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2018. http://www.nusl.cz/ntk/nusl-391818.

Full text

Abstract:

Dvě pokročilé vysoce legované austenitické oceli s Fe-Ni-Cr matricí byly studovány za podmínek nízkocyklové únavy jak za pokojové tak vysoké teploty. Široká škála experimentálních a charakterizačních nástrojů byla použita ke studiu vzájemně souvisejících aspektů zahrnujících chemické složení slitin, mikrostrukturu, deformační mechanismy a celkovou odezvu materiálů na externě působící zatížení. Klíčové mechanismy a faktory definující mechanické vlastnosti a výkonnost v reálném provozu byly analyzovány a diskutovány v souvislosti s materiálovým designem. • Standardní únavové experimenty byly pro

APA, Harvard, Vancouver, ISO, and other styles

2

Van, Alst Laura Jane. "Laboratory Experiments in Cold Temperature Rock Deformation." Thesis, University of Oregon, 2011. http://hdl.handle.net/1794/12191.

Full text

Abstract:

ix, 44 p. : ill. (some col.)<br>The physical weathering of rock in cryogenic regions through a process called ice segregation is important for understanding subglacial processes, landscape evolution and cold region engineering. Ice segregation was examined by freezing water-saturated cores of Eugene Formation sandstone at temperatures between -15° and -2°C. Cores between -8° and -5°C took 30-45 minutes to crack, while cores at warmer or cooler temperatures took either more than 90 minutes or did not crack at all. Numerical modeling shows that cores break under isothermal conditions. The result

APA, Harvard, Vancouver, ISO, and other styles

3

Djazeb, Mohammad Reza. "High temperature deformation of two-phase Al-alloys." Thesis, Imperial College London, 1990. http://hdl.handle.net/10044/1/46282.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Przydatek, Jan. "The elevated temperature deformation of aluminium alloy 2650." Thesis, Imperial College London, 1998. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.287577.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Lee, Kok Loong. "Deformation behaviour of Cu-Cr in-situ composite." Thesis, University of Leicester, 2004. http://hdl.handle.net/2381/11077.

Full text

Abstract:

With the increasing requirements for higher strength materials with high electrical conductivity, a lot of interest has been paid to develop Cu-based composites in the last 25 years. These composites have superior tensile strength, combined with good electrical conductivity, to that exhibited by pure Cu and conventional Cu alloys. To date, much of the research carried out on this composite has focused on the mechanical and electrical properties of the as processed material. However, there is a basic lack of understanding of the way in which the properties may change or degrade during service.

APA, Harvard, Vancouver, ISO, and other styles

6

Daga, Vijay. "High temperature deformation of pan-based carbon fiber precursors." Thesis, Georgia Institute of Technology, 1988. http://hdl.handle.net/1853/11185.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

James, M. P. "Deformation mechanisms for the high temperature Bi-2223 superconductor." Thesis, University of Cambridge, 1996. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.605023.

Full text

Abstract:

The future application of high temperature superconductors in high field magnets, energy storage, motors and generators, or power transmission depends on the production of long lengths of high quality material. This thesis describes the effect of different deformation mechanisms, during processing, for the high temperature Bi-2223 superconductor produced via the oxide power in tube method. The deformation behaviour of the tape is investigated during both longitudinal and cross rolling, pressing and lubricated pressing, and sequential pressing and lubricated sequential pressing. The emphasis of

APA, Harvard, Vancouver, ISO, and other styles

8

Bacroix, Brigitte. "Prediction of high temperature deformation textures in FCC metals." Thesis, McGill University, 1986. http://digitool.Library.McGill.CA:80/R/?func=dbin-jump-full&object_id=74036.

Full text

APA, Harvard, Vancouver, ISO, and other styles

9

Chen, Yong-Ching. "Elevated temperature deformation and forming of aluminum-matrix composites /." The Ohio State University, 1991. http://rave.ohiolink.edu/etdc/view?acc_num=osu1487758178238026.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

Dike, Shweta Srikant. "Dynamic Deformation of Materials at Elevated Temperatures." Cleveland, Ohio : Case Western Reserve University, 2010. http://rave.ohiolink.edu/etdc/view?acc_num=case1268337193.

Full text

Abstract:

Thesis (Master of Sciences (Engineering))--Case Western Reserve University, 2010<br>Department of EMC - Mechanical Engineering Title from PDF (viewed on 2010-05-25) Includes abstract Includes bibliographical references and appendices Available online via the OhioLINK ETD Center

APA, Harvard, Vancouver, ISO, and other styles

11

Stanford-Beale, Christopher Andrew. "High temperature deformation of short fibre reinforced aluminium based composites." Thesis, University of Cambridge, 1989. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.315905.

Full text

APA, Harvard, Vancouver, ISO, and other styles

12

Busso, Esteban Pedro. "Cyclic deformation of monocrystalline nickel aluminide and high temperature coatings." Thesis, Massachusetts Institute of Technology, 1990. http://hdl.handle.net/1721.1/13973.

Full text

APA, Harvard, Vancouver, ISO, and other styles

13

Xu, Lili Sh D. Massachusetts Institute of Technology. "High temperature deformation mechanisms and strain heterogeneities in calcite rocks." Thesis, Massachusetts Institute of Technology, 2008. http://hdl.handle.net/1721.1/45602.

Full text

Abstract:

Thesis (Ph. D.)--Massachusetts Institute of Technology, Dept. of Earth, Atmospheric, and Planetary Sciences, 2008.<br>This electronic version was submitted by the student author. The certified thesis is available in the Institute Archives and Special Collections.<br>Page 238 blank.<br>Includes bibliographical references.<br>In nature, carbonates often accumulate large amounts of strain in localized shear zones. Such marble sequences play a key role in crustal deformation processes. Despite extensive field and laboratory investigation, many questions remain concerning the mechanical behavior o

APA, Harvard, Vancouver, ISO, and other styles

14

Crenshaw, Brent R. "PHOTOLUMINESCENT POLYMER MATERIALS WITH BUILT-IN DEFORMATION AND TEMPERATURE SENSORS." Case Western Reserve University School of Graduate Studies / OhioLINK, 2007. http://rave.ohiolink.edu/etdc/view?acc_num=case1169825895.

Full text

APA, Harvard, Vancouver, ISO, and other styles

15

Wen, Xingshuo. "High Temperature Compressive Deformation Behavior of Mo-Si-B Alloy." University of Cincinnati / OhioLINK, 2009. http://rave.ohiolink.edu/etdc/view?acc_num=ucin1250626914.

Full text

APA, Harvard, Vancouver, ISO, and other styles

16

Honniball, Peter Daniel. "The influence of temperature upon the deformation of alpha zirconium." Thesis, University of Manchester, 2014. https://www.research.manchester.ac.uk/portal/en/theses/the-influence-of-temperature-upon-the-deformation-of-alpha-zirconium(ea5d6180-0730-492f-89ab-04c6938398f1).html.

Full text

Abstract:

Zirconium is used inside nuclear reactors as fuel cladding. The in-reactor performance of zirconium alloys is strongly influenced by the properties that develop during thermo-mechanical processing, such as the microstructure and crystallographic texture. Optimising the combination of properties would enable improved reactor efficiency, longer component lifetimes and reductions in nuclear waste. Achieving the desired texture and microstructure requires a mechanistic understanding of the processes that govern them: deformation and recrystallisation. These mechanisms are influenced by numerous va

APA, Harvard, Vancouver, ISO, and other styles

17

Badirujjaman, Syed. "Grain boundary motion under high temperature low cycle deformation : study of mechanism, kinetics and driving force." kostenfrei, 2005. http://deposit.ddb.de/cgi-bin/dokserv?idn=974934976.

Full text

APA, Harvard, Vancouver, ISO, and other styles

18

Johnson, Michael DeShawn 1977. "Deformation and fracture of polycarbonate and rubber-modified polycarbonate under controlled temperature, deformation rate, and notch stress triaxiality." Thesis, Massachusetts Institute of Technology, 2001. http://hdl.handle.net/1721.1/8544.

Full text

Abstract:

Thesis (S.M.)--Massachusetts Institute of Technology, Dept. of Mechanical Engineering, 2001.<br>Includes bibliographical references (leaves 217-220).<br>The deformation and fracture of polycarbonate and polycarbonate toughened with methyl-methacrylate shell/polybutadiene core sub-micron particles are investigated. The effects of strain rate, temperature, and notch stress triaxiality on deformation and fracture are studied. The Arruda-Boyce constitutive model for glassy polymers and finite element simulations are used to simulate the deformation of the polycarbonate homopolymer subjected to com

APA, Harvard, Vancouver, ISO, and other styles

19

Liu, Zhaoran. "Plastic deformation of Ti-6Al-4V micro-pillars at room temperature." Thesis, University of Birmingham, 2017. http://etheses.bham.ac.uk//id/eprint/7854/.

Full text

Abstract:

In this work, the deformation behaviour of Ti-6Al-4V micro-pillars was studied via compression tests at room temperature. Micro-pillars containing either the single α phase region or both α and β phases were prepared and either prismatic < a > slips or < c+a > slips were activated. Thin foils for TEM study were prepared using the FIB from the selected deformed pillars. STEM was used to image dislocations and their interaction with the α/β interfaces. Sample yield strength has been observed in all groups of micro-pillars and its relationship with the β phase, α/β interface, orientation and extr

APA, Harvard, Vancouver, ISO, and other styles

20

Pelemo, David Ayo. "High temperature deformation of a two phase titanium alloy IMI-550." Thesis, Imperial College London, 1988. http://hdl.handle.net/10044/1/47217.

Full text

APA, Harvard, Vancouver, ISO, and other styles

21

Ngan, Tiffany. "Evaluation of the Response of Armor Alloys to High Temperature Deformation." The Ohio State University, 2014. http://rave.ohiolink.edu/etdc/view?acc_num=osu1387303092.

Full text

APA, Harvard, Vancouver, ISO, and other styles

22

Thirumalai, Neeraj Srinivas. "Low temperature creep of titanium alloys : microstructure, deformation mechanisms and modeling /." The Ohio State University, 2000. http://rave.ohiolink.edu/etdc/view?acc_num=osu1488196234911249.

Full text

APA, Harvard, Vancouver, ISO, and other styles

23

Tao, Min Ravichandran G. "High temperature deformation of Vitreloy bulk metallic glasses and their composite /." Diss., Pasadena, Calif. : Caltech, 2006. http://resolver.caltech.edu/CaltechETD:etd-03022006-005723.

Full text

APA, Harvard, Vancouver, ISO, and other styles

24

Coulter, Robert A. "Alloying effects on high temperature deformation behavior of nickel aluminide intermetallics." Morgantown, W. Va. : [West Virginia University Libraries], 2000. http://etd.wvu.edu/templates/showETD.cfm?recnum=1382.

Full text

Abstract:

Thesis (M.S.)--West Virginia University, 2000.<br>Title from document title page. Document formatted into pages; contains xi, 94 p. : ill. (some col.). Vita. Includes abstract. Includes bibliographical references (p. 88-89).

APA, Harvard, Vancouver, ISO, and other styles

25

Swaroop, N. R. Sathya. "Processing And High Temperature Deformation Of Pure And Magnesia Doped Alumina." Thesis, Indian Institute of Science, 2000. https://etd.iisc.ac.in/handle/2005/180.

Full text

Abstract:

Creep resistance is an important design criterion at high temperatures especially when continuous attempts are made to increase the efficiencies by increasing the operating temperatures. Alumina is an important high temperature material and in addition to that it is used in wide variety of applications such as substrates for electronic packaging, spark plugs, envelopes for sodium vapour lamps, cutting tools (when reinforced with silicon carbide) and in artificial joint prostheses. Studies on creep in alumina. have started as early as 1961. There are differing mechanisms proposed to explain

APA, Harvard, Vancouver, ISO, and other styles

26

Swaroop, N. R. Sathya. "Processing And High Temperature Deformation Of Pure And Magnesia Doped Alumina." Thesis, Indian Institute of Science, 2000. http://hdl.handle.net/2005/180.

Full text

Abstract:

Creep resistance is an important design criterion at high temperatures especially when continuous attempts are made to increase the efficiencies by increasing the operating temperatures. Alumina is an important high temperature material and in addition to that it is used in wide variety of applications such as substrates for electronic packaging, spark plugs, envelopes for sodium vapour lamps, cutting tools (when reinforced with silicon carbide) and in artificial joint prostheses. Studies on creep in alumina. have started as early as 1961. There are differing mechanisms proposed to explain th

APA, Harvard, Vancouver, ISO, and other styles

27

Kubiak, Angela Dawne. "Effect of homogenization on high temperature deformation behaviour of AA3xxx aluminum alloys." Thesis, University of British Columbia, 2009. http://hdl.handle.net/2429/7382.

Full text

Abstract:

The effect of homogenization practice and alloy Mn content on the dispersoid density and high temperature constitutive behaviour of AA3xxx aluminum alloys has been studied. Experimental work was conducted on three as-cast alloys with different Mn compositions: AA3102 (0.26 wt% Mn), an intermediate Mn alloy (0.75 wt% Mn), and AA3003 (1.27 wt% Mn). Homogenization treatments were conducted at soak temperatures from 500 to 630°C and times of 1 to 24 hours. The evolution of microstructure during homogenization (at 600°C over a soak time of 24 hours) was characterized using electrical conductivity

APA, Harvard, Vancouver, ISO, and other styles

28

Zheng, Li. "Temperature-dependent visco-elastic-plastic analysis of permanent deformation in bituminous pavements." Thesis, London South Bank University, 1994. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.259911.

Full text

Abstract:

In this project the deformation behaviour of a rolled asphalt mixture is investigated, and the influence of temperature on the deformation mechanism of the mixture is assessed, based on a series of uniaxial creep and creep recovery experiments conducted under compressive stress and controlled temperature. Firstly, the experiments were conducted for various temperature levels, loading time, and number of load applications. It is found that the total strain consists of the elastic, plastic, viscoelastic and viscoplastic strain components. The temperature and number of load cycles hardly affects

APA, Harvard, Vancouver, ISO, and other styles

29

Galetz, Mathias. "Influence of temperature on friction and deformation mechanisms in artificial knee joints /." Aachen : Shaker, 2009. http://d-nb.info/99681227X/04.

Full text

APA, Harvard, Vancouver, ISO, and other styles

30

Fergusson, Austin David. "Non-equilibrium Dynamics of Nanoscale Soft Matter Deformation." Thesis, Virginia Tech, 2014. http://hdl.handle.net/10919/50500.

Full text

Abstract:

Life is soft. From the fluid-like structure of lipid bilayers to the flexible folding of proteins, the realm of nanoscale soft matter is a complex and vibrant area of research. The lure of personalized medicine, advanced sensing technology, and understanding life at a fundamental level pushes research forward. This work considers to areas: (1) lipid bilayer dynamics in the presence of substrate defects and (2) the inverse temperature transition of elastic proteins. Molecular dynamics simulations as well as umbrella sampling were employed. The behavior of the bilayers discussed in the work prov

APA, Harvard, Vancouver, ISO, and other styles

31

Huron, Eric S. "High temperature monotonic and cyclic deformation in a directionally solidified nickel-base superalloy." Thesis, Georgia Institute of Technology, 1986. http://hdl.handle.net/1853/16093.

Full text

APA, Harvard, Vancouver, ISO, and other styles

32

Cullers, Cheryl Lynne. "Deformation mechanisms of NiA1 cyclicly deformed near the brittle-to-ductile transition temperature." Thesis, Georgia Institute of Technology, 1993. http://hdl.handle.net/1853/20050.

Full text

APA, Harvard, Vancouver, ISO, and other styles

33

Greenwood, Paul Frederick. "The effect of temperature on the deformation and wear and tear of diamond." Thesis, University of Hull, 1998. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.301634.

Full text

APA, Harvard, Vancouver, ISO, and other styles

34

Pitchford, James Edward. "Effects of structure on mechanisms of high temperature plastic deformation in oxide ceramics." Thesis, University of Cambridge, 2000. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.621686.

Full text

APA, Harvard, Vancouver, ISO, and other styles

35

Chang, Shuang. "Strength and Deformation Behaviour of Cemented Paste Backfill in Sub-zero Environment." Thesis, Université d'Ottawa / University of Ottawa, 2016. http://hdl.handle.net/10393/34754.

Full text

Abstract:

Underground mining produces a huge amount of voids and an even larger quantity of mine waste. Overlooking these voids could lead to the possibility of ground subsidence, as well as safety issues during mining operation; while ignoring the waste, could cause environmental pollution and significant suffering. One solution to remedy both (the voids and the waste) is cemented paste backfill (CPB), which is gaining increased recognition in both the mining industry and academic research. Transforming tailings into cemented paste, and transporting this back to underground stopes, not only negates the

APA, Harvard, Vancouver, ISO, and other styles

36

Zhou, Zhengming. "Non-linear elastic modelling of coupled deformation, heat, air and moisture transfer in unsaturated soil." Thesis, Cardiff University, 1996. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.360637.

Full text

APA, Harvard, Vancouver, ISO, and other styles

37

Ceyhan, Ümit [Verfasser]. "High temperature deformation and fracture assessment of similar steel welds / vorgelegt von Ümit Ceyhan." [Clausthal-Zellerfeld] : [Univ.-Bibliothek], 2007. http://d-nb.info/985769653/34.

Full text

APA, Harvard, Vancouver, ISO, and other styles

38

Zarandi, Faramarz MH. "The effect of high temperature deformation on the hot ductility of Nb-microalloyed steel /." Thesis, McGill University, 2004. http://digitool.Library.McGill.CA:80/R/?func=dbin-jump-full&object_id=85109.

Full text

Abstract:

Low hot ductility at the straightening stage of the steel continuous casting process, where the surface temperature ranges from 600 to 1200°C, is associated with transverse cracking on the billet surface. This is attributed to various microalloying elements, which are essential for the mechanical characteristics of the final products. Thermomechanical processing is a new approach to alleviate this problem. In this work, two grades of Nb-containing steel, one modified with B, were examined. In order to simulate the key parameters of continuous casting, specimens were melted in situ and s

APA, Harvard, Vancouver, ISO, and other styles

39

Galetz, Mathias [Verfasser]. "Influence of Temperature on Friction and Deformation Mechanisms in Artificial Knee Joints / Mathias Galetz." Aachen : Shaker, 2009. http://d-nb.info/1159835519/34.

Full text

APA, Harvard, Vancouver, ISO, and other styles

40

Salam, Abdus. "The relationships between high temperature deformation mechanisms, microstructures and mechanical properties in titanium alloys." Thesis, University of Leeds, 1990. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.237231.

Full text

APA, Harvard, Vancouver, ISO, and other styles

41

Wright, Lawrence William. "Creep deformation of CMSX-4 NBSCS during uniaxial and multiaxial loading at high temperature." Thesis, University of Cambridge, 2003. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.619709.

Full text

APA, Harvard, Vancouver, ISO, and other styles

42

Han, Songlin. "High temperature deformation modelling and finite element implementation for single crystal turbine blade materials." Thesis, University of Bristol, 2000. http://hdl.handle.net/1983/943aaa75-6406-4a06-9250-9b0ae85a5eae.

Full text

APA, Harvard, Vancouver, ISO, and other styles

43

Subramanian, Karthikeyan. "Mechanisms and Effect of Microstructure on High Temperature Deformation of Gamma-TiAl Based Alloys." The Ohio State University, 2003. http://rave.ohiolink.edu/etdc/view?acc_num=osu1047500481.

Full text

APA, Harvard, Vancouver, ISO, and other styles

44

Brandes, Matt C. "Creep, Fatigue, And Deformation Of Alpha And Alpha-Beta Titanium Alloys At Ambient Temperature." The Ohio State University, 2008. http://rave.ohiolink.edu/etdc/view?acc_num=osu1221848896.

Full text

APA, Harvard, Vancouver, ISO, and other styles

45

GHAT, MOHAMED SAAD SHEHATA RIZK. "Physical modelling of the high temperature deformation of complex microstructure materials for aeronautical applications." Doctoral thesis, Università Politecnica delle Marche, 2020. http://hdl.handle.net/11566/274085.

Full text

Abstract:

Oggi l'industria aerospaziale sta crescendo rapidamente nello sviluppo del componente meccanico per la parte calda del motore a reazione. La previsione del comportamento dinamico dei metalli è di solito studiata da modelli fenomenologici. In questo studio, abbiamo descritto il comportamento della deformazione a caldo usando diversi approcci per il modello costitutivo: equazione di Hansel e spittle, equazione di Garofalo e modellazione di base. Nel presente lavoro di dottorato sono stati utilizzati tre diversi metalli (Inconel 718, Ti-6Al-4V e AA2024 - T3) che sono ampiamente utilizzati nell'in

APA, Harvard, Vancouver, ISO, and other styles

46

Huang, Yi. "Mechanical property, microstructural development and constitutive analysis associated with the high temperature deformation of Inconel 718." Thesis, University of Birmingham, 2001. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.368453.

Full text

APA, Harvard, Vancouver, ISO, and other styles

47

Hudson, Candi Monica. "Investigation of low temperature creep deformation behavior of a metastable beta Titanium-14.8Wt%Vanadium alloy." College Park, Md. : University of Maryland, 2004. http://hdl.handle.net/1903/1729.

Full text

Abstract:

Thesis (Ph. D.) -- University of Maryland, College Park, 2004.<br>Thesis research directed by: Material Science and Engineering. Title from t.p. of PDF. Includes bibliographical references. Published by UMI Dissertation Services, Ann Arbor, Mich. Also available in paper.

APA, Harvard, Vancouver, ISO, and other styles

48

Srithar, Thillaikanagasabai. "Stress, deformation and flow analysis of oil sand masses under applied load and temperature changes." Thesis, University of British Columbia, 1989. http://hdl.handle.net/2429/28067.

Full text

Abstract:

Stress and temperature changes in oil sand masses associated with oil recovery can give rise to stability and deformation problems. An analytical formulation is developed to analyze such kind of problems and incorporated in the finite element program 'CONOIL II’. Oil sand is a multiphase material, which can be analyzed as an equivalent two phase material; solid grains saturated with a single fluid phase, having an equivalent compressibility. The equivalent compressibility is obtained by combining the concepts of unsaturated soils with the gas laws and the gas-liquid interaction effects. Class

APA, Harvard, Vancouver, ISO, and other styles

49

Benafan, Othmane. "Deformation and Phase Transformation Processes in Polycrystalline NiTi and NiTiHf High Temperature Shape Memory Alloys." Doctoral diss., University of Central Florida, 2012. http://digital.library.ucf.edu/cdm/ref/collection/ETD/id/5123.

Full text

Abstract:

The unique ability of shape memory alloys (SMAs) to remember and recover their original shape after large deformation offers vast potential for their integration in advanced engineering applications. SMAs can generate recoverable shape changes of several percent strain even when opposed by large stresses owing to reversible deformation mechanisms such as twinning and stress-induced martensite. For the most part, these alloys have been largely used in the biomedical industry but with limited application in other fields. This limitation arises from the complexities of prevailing microstructural

APA, Harvard, Vancouver, ISO, and other styles

50

Sammonds, Peter Robert. "Triaxial deformation experiments on natural sea ice as a function of temperature and strain rate." Thesis, University College London (University of London), 1987. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.241922.

Full text

APA, Harvard, Vancouver, ISO, and other styles

We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!