Log in

Relevant bibliographies by topics / Water mills

Contents

Journal articles
Dissertations / Theses
Books
Book chapters
Conference papers
Reports

Academic literature on the topic 'Water mills'

Author: Grafiati

Published: 4 June 2021

Last updated: 25 July 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Water mills.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Water mills"

1

gage, fran. "Wheat into Flour: A Story of Milling." Gastronomica 6, no. 1 (2006): 84–92. http://dx.doi.org/10.1525/gfc.2006.6.1.84.

Full text

Abstract:

This article chronicles the milling of wheat beginning with its cultivation about ten thousand years ago. It describes the milling of the grain, starting with primitive hand tools, progressing to larger mills, then the use of animal power to turn milling stones. Changes in the design of the mills made them more efficient. Using flowing water to turn the millstone greatly increased output; people without access to flowing water devised mills turned by the wind. As wheat became a more important crop, an automated system, using elevators and gravity chutes, made it possible to mill even more grai

APA, Harvard, Vancouver, ISO, and other styles

2

Arciszewski, T. J., M. E. McMaster, C. B. Portt, and K. R. Munkittrick. "Detection of food limitation in health of white sucker (Catostomus commersoni) 5 years after the closure of a bleached kraft pulp mill." Water Quality Research Journal 50, no. 2 (2014): 152–66. http://dx.doi.org/10.2166/wqrjc.2014.130.

Full text

Abstract:

Recovery of fish after implementing better management of effluent or following the closure of pulp mills is not well studied. Results from existing studies suggest the predominant responses observed during the operation of mills would predict a pathway of recovery, but this hypothesis has not been tested at mills with variable effects on fish. Multiple studies done at a mill in northern Ontario showed variable responses in white sucker (Catostomus commersoni), including effects on reproductive endpoints. Data from most years failed, however, to meet strict definitions of response patterns used

APA, Harvard, Vancouver, ISO, and other styles

3

Donners, K., M. Waelkens, and J. Deckers. "Water mills in the area of Sagalassos: a disappearing ancient technology." Anatolian Studies 52 (December 2002): 1–17. http://dx.doi.org/10.2307/3643076.

Full text

Abstract:

AbstractAs water mills are quickly disappearing throughout Turkey, it is becoming very difficult to collect information about this type of ancient technology. By means of an ethno-archaeological study carried out in the territory of ancient Sagalassos (Pisidia), the very limited remains of 15 water mills were recorded. Following the recent introduction of electric mills, water mills have lost their previous importance and today some of the mill houses are used as stables or shelters. Interviews with local people provided some information about the capacity of the mills and about the kind of gr

APA, Harvard, Vancouver, ISO, and other styles

4

Çorapçıoğlu, Gülferah. "Conservation of the traditional water mills in the Mediterranean Region of Turkey." Journal of Cultural Heritage Management and Sustainable Development 6, no. 3 (2016): 287–315. http://dx.doi.org/10.1108/jchmsd-02-2015-0002.

Full text

Abstract:

Purpose The purpose of this paper is to ensure the preservation and sustainability of traditional water mills in Turkey with their original function and to allow these water mills to become heritage for future generations. Design/methodology/approach The study is the original examination of one sample water mill to be conserved, that is chosen from 11 water mills that were determined after the investigation of water mills in of Antalya, in Mediterranean Region. A preliminary study was first performed using the external observation method on 11 horizontal wheel water mills. The water mills to b

APA, Harvard, Vancouver, ISO, and other styles

5

Wilson, Andrew. "The Water-Mills on the Janiculum." Memoirs of the American Academy in Rome 45 (2000): 219. http://dx.doi.org/10.2307/4238771.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

TIJERO, ANTONIO, M. CONCEPCION MONTE, and ANGELES BLANCO. "Use of talc to control problems associated with dissolved and colloidal material in papermaking." February 2012 11, no. 2 (2012): 43–51. http://dx.doi.org/10.32964/tj11.2.43.

Full text

Abstract:

Increasingly stringent environmental standards and market demands are forcing pulp and paper mills to minimize both their water usage and their effluent discharge. Higher rates of process water reuse in pulp and paper mills leads to increased amounts of dissolved and colloidal substances in process water, which is a major fac¬tor limiting further closure of the water circuits. This study explores the use of different types of talc as control agents for dissolved and colloidal material contained in white water from paper mills using recovered and coated paper as raw materials. It also identifie

APA, Harvard, Vancouver, ISO, and other styles

7

Holden, Roger N. "Water Supplies for Steam-powered Textile Mills." Industrial Archaeology Review 21, no. 1 (1999): 41–51. http://dx.doi.org/10.1179/iar.1999.21.1.41.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

Wilson, Andrew. "Water-Mills at Amida: Ammianus Marcellinus 18.8.11." Classical Quarterly 51, no. 1 (2001): 231–36. http://dx.doi.org/10.1093/cq/51.1.231.

Full text

APA, Harvard, Vancouver, ISO, and other styles

9

Wilson, Andrew. "Late antique water-mills on the Palatine." Papers of the British School at Rome 71 (November 2003): 85–109. http://dx.doi.org/10.1017/s0068246200002403.

Full text

Abstract:

I MULINI AD ACQUA TARDOANTICHI SUL PALATINONel corso degli scavi diretti da Henry Hurst nel settembre 2002 sul pendio settentrionale del Palatino a Roma, è stato riportato alla luce un pavimento tardoantico realizzato con pietre sia intere che frammentarie di mulini. Le pietre sono di un tipo generalmente associato ai mulini ad acqua per la macinazione del grano e, insieme a quelle di una pavimentazione simile rinvenuta diversi anni fa nelle vicinanze da Clemens Krause, forniscono un'evidenza considerevole per la presenza di un complesso comprendente almeno cinque mulini ad acqua, situato sul

APA, Harvard, Vancouver, ISO, and other styles

10

Panneerselvam, L. "Water Pollution Abatement in Small Paper Mills in India." Water Science and Technology 20, no. 1 (1988): 37–48. http://dx.doi.org/10.2166/wst.1988.0006.

Full text

Abstract:

In order to reduce the demand for the forest based raw materials by the organised industrial sectors like the large integrated pulp and paper mills, the Government of India started promoting several small-scale pulp and paper mills based on non-wood agricultural residue raw materials. However promotion of these small mills has created another environmental problem i.e. severe water pollution due to non-recovery of chemicals. Because of the typical characteristics like high silica content etc. of the black liquor produced and the subsequent high capital investment needed for a recovery system,

APA, Harvard, Vancouver, ISO, and other styles

More sources

Dissertations / Theses on the topic "Water mills"

1

Du, Toit Rene-Marie. "The identification of prevalent bacterial isolates and characterisation of microbial communities in paper-mill water systems." Pretoria : [s.n.], 2007. http://upetd.up.ac.za/thesis/available/etd-06272008-144355.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Larsson, Anna, and Emma Bednarcik. "Alternative utilization of excess water in Cuban sugar mills." Thesis, KTH, Energiteknik, 2014. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-148087.

Full text

Abstract:

The sugar cane industry is one of the most water demanding industries in the world. In spite of the fact that the sugar cane itself contains enough water to supply the entire sugar manufacturing process, supplementary water from other sources is added. As a result, the sugar cane industry consumes and generates water in excess. The generated wastewater contains high amounts of organic compounds, which would cause pollution if it were directly discharged into nature. The sugar mill Carlos Baliño is located in rural Cuba and is the only sugar mill in Cuba to produce organic sugar. Carlos Baliño

APA, Harvard, Vancouver, ISO, and other styles

3

Schriwer, Charlotte. ""From water every living thing" : water mills, irrigation and agriculture in the Bilād al-Shām : perspectives on history, architecture, landscape and society, 1100-1850 AD." Thesis, University of St Andrews, 2006. http://hdl.handle.net/10023/7080.

Full text

Abstract:

This work explores the role of the watermill in the history and society of Jordan, Syria and Cyprus from the 12th to the 19th century. Previous studies in this area have been limited, and have usually assumed the watermills in the Levant to date from the Ottoman period. This work aims to suggest that many of the mills still extant today in fact date from an earlier period. A review of the historical documentation and archaeological material is the main background of this study, while an examination of the watermills themselves aims to provide a permanent record of these before they disappear d

APA, Harvard, Vancouver, ISO, and other styles

4

Khalil, Samina. "Policy options for water pollution control : The case of textile processing mills in Pakistan." Thesis, University of York, 2009. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.516505.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Hasan, Syezlin. "Tradable permits for water pollution control : the case of palm oil mills in Malaysia." Thesis, University of York, 2008. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.444756.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Esty, Jessica Marie Lange Clifford R. "The effects of sulfide on pulp and paper wastewater color reversion." Auburn, Ala., 2005. http://repo.lib.auburn.edu/2005%20Fall/Thesis/ESTY_JESSICA_37.pdf.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

Mavrakis, Titos Nikolaou. "Exploitation of bioactive constituents of olive leaves, grape pomace, olive mills waste water and their application in phytoprotection." Thesis, Cranfield University, 2009. http://dspace.lib.cranfield.ac.uk/handle/1826/4494.

Full text

Abstract:

Pure plants extracts or/and essential oils show antifungal and antibacterial activity against a wide range of fungi and bacteria. Recently there has been increasing interest in the effects of natural compounds against important plant pathogens (fungi and bacteria). Although the antimicrobial activity of oleuropein, grape pomace (GPE) and olive mills waste water (OMWW) extracts have been studied widely, little research has been done on the in vitro and in vivo evaluation of these extracts efficiency against important plant diseases and postharvest treatments. The overall objectives of this stud

APA, Harvard, Vancouver, ISO, and other styles

8

Bauer, Elizabeth Nanette. "MODIFICATION OF AN EXISTING BENTHAL MODEL FOR PAPER MILL WASTES." Thesis, The University of Arizona, 1985. http://hdl.handle.net/10150/275443.

Full text

APA, Harvard, Vancouver, ISO, and other styles

9

Watkins, E. James. "Foulant adsorption onto ion exchange membranes." Diss., Georgia Institute of Technology, 1999. http://hdl.handle.net/1853/7062.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

Miller, Matthew J. "An historical examination of water-powered mill sites and markets using geographic information system analysis : Augusta County, Virginia, 1880-1885 /." Thesis, This resource online, 1994. http://scholar.lib.vt.edu/theses/available/etd-09052009-041037/.

Full text

Abstract:

Thesis (M.S.)--Virginia Polytechnic Institute and State University, 1994.<br>Vita. Abstract. One map in back pocket. Includes bibliographical references (leaves 73-75). Also available via the Internet.

APA, Harvard, Vancouver, ISO, and other styles

More sources

Books on the topic "Water mills"

1

Lynes, Marian S. Water-powered grist mills of Schoharie County. Times-Journal (Printer), 1988.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

2

Ashton, Norman D. Leicestershire water-mills. Reprint, 2004.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

3

Staples, Chester O. Mills of southern Africa: Water, wind and horse. Umdaus, 2006.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

4

Suggs, George G. Water mills of the Missouri Ozarks. University of Oklahoma Press, 1990.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

5

Huls, Mary Ellen. Water mills: A bibliography. Vance Bibliographies, 1986.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

6

Kovács, József. Vízimalmok a Kárpát-medencében: A Kárpát-medence lisztelő vízimalmainak virágkoráról, majd hanyatlásuk időszakáról, illetve néhányuk jelen állapotáról összegyűjtött ismeretek. Romanika Kiadó, 2012.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

7

Schwalbach, Rolf. Die Mühlen zwischen Dotzheim und Biebrich. Thorsten Reiss Verlag, 2011.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

8

Water of Leith Conservation Trust., ed. The water mills of the Water of Leith. Water of Leith Conservation Trust, 2001.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

9

Prall, Joan. Mills and memories. J. Prall, 1985.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

10

Zippel, Fridolin. Water management in paper mills. 2nd ed. Theilacker, 2001.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

More sources

Book chapters on the topic "Water mills"

1

McKinney, R. W. J. "Water and waste water treatment in recycling mills." In Technology of Paper Recycling. Springer Netherlands, 1995. http://dx.doi.org/10.1007/978-94-011-1328-1_7.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Hasanudin, Udin, and Tjandra Setiadi. "Sustainable Wastewater Management in Palm Oil Mills." In Green Technologies for Sustainable Water Management. American Society of Civil Engineers, 2016. http://dx.doi.org/10.1061/9780784414422.ch27.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Shammas, Nazih K., Lawrence K. Wang, and William A. Selke. "Completely Closed Water Systems in Paper Mills." In Flotation Technology. Humana Press, 2010. http://dx.doi.org/10.1007/978-1-60327-133-2_12.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Bajpai, Pratima, Pramod K. Bajpai, and Ryuichiro Kondo. "Purification of Process Water in Closed-Cycle Mills." In Biotechnology for Environmental Protection in the Pulp and Paper Industry. Springer Berlin Heidelberg, 1999. http://dx.doi.org/10.1007/978-3-642-60136-1_9.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Zeritis, Panos, and Michael Sideridis. "Paper Mills Effluent Treatment up to Closed Water System." In New Developments in Industrial Wastewater Treatment. Springer Netherlands, 1991. http://dx.doi.org/10.1007/978-94-011-3272-5_5.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Yao, Fulai, and Yaming Yao. "Energy Efficiency Optimization of Pumping Stations and Fan Stations." In Efficient Energy-Saving Control and Optimization for Multi-Unit Systems. Springer Nature Singapore, 2024. http://dx.doi.org/10.1007/978-981-97-4492-3_23.

Full text

Abstract:

AbstractMany occasions and fields have requirements for transporting liquids and gases, so pumps and fans are widely used in chemical industry, pharmaceuticals, power plants, steel mills, papermaking, oil refining, water conservancy, water supply, drainage and irrigation, sewage, secondary water supply, hospitals, office buildings, shopping malls, hotels, hotels and other occasions. The total electricity consumption of pumps and fans accounts for 30–35% of the world's total electricity consumption.

APA, Harvard, Vancouver, ISO, and other styles

7

Drescher, Silke. "Integrated Wastewater Concepts for Olive Mills in the West Bank, Palestine." In Water in the Middle East and in North Africa. Springer Berlin Heidelberg, 2004. http://dx.doi.org/10.1007/978-3-662-10866-6_16.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

Squatriti, Paolo. "‘Advent and Conquests’ of the Water Mill in Italy*." In Technology and Resource Use in Medieval Europe: Cathedrals, Mills, and Mines. Routledge, 2021. http://dx.doi.org/10.4324/9781315241661-9.

Full text

APA, Harvard, Vancouver, ISO, and other styles

9

Crossley, David. "The Archaeology of Water Power in Britain Before the Industrial Revolution." In Technology and Resource Use in Medieval Europe: Cathedrals, Mills, and Mines. Routledge, 2021. http://dx.doi.org/10.4324/9781315241661-8.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

Biondi, Andrea. "Acqua e carbone in Casentino tra XII e XV secolo: elementi di analisi archeologica dei paesaggi medievali." In Strumenti per la didattica e la ricerca. Firenze University Press, 2024. http://dx.doi.org/10.36253/979-12-215-0376-0.08.

Full text

Abstract:

Water mills and charcoal pits have constituted two of the main economic factors of the Tuscan Apennine mountains. Between the 12th and 15th centuries, they were used by noble powers and rural communities, thus being the protagonists of fundamental economic activities, such as milling (wheat and chestnuts) and siderurgy. Therefore, the analyzed sites nearby Raggiolo and Pratovecchio Stia (Casentino) are relevant case studies to understand the dynamics of the medieval mountain economic systems.

APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Water mills"

1

Bowers, David F., and Van Maltby. "Historical Perspective of Pulp and Paper Water Use and Reuse." In CORROSION 1996. NACE International, 1996. https://doi.org/10.5006/c1996-96569.

Full text

Abstract:

The manufacture of pulp and paper involves the use of water in almost every unit process. Integrated mills (those having both pulp and paper making facilities) have historically been located along a large, readily available supply of fresh water. Unlike many other industries which use a majority of fresh water for cooling purposes, the paper industry uses a substantially larger fraction of water in the manufacturing process itself. Unit processes which require significant water use include wood handling, pulping, pulp screening and cleaning, pulp bleaching, chemical recovery, pulp storage and

APA, Harvard, Vancouver, ISO, and other styles

2

Tommaso, Marzia Di, Mosè Rossi, Gabriele Comodi, et al. "WATER MILLS REFURBISHMENT FOR INCREASING THE HYDROPOWER CAPACITY: AN ITALIAN CASE STUDY." In 37th International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems (ECOS 2024). ECOS 2024, 2024. http://dx.doi.org/10.52202/077185-0207.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Colbert, Raymond, and Ronald Reich. "Corrosion Monitoring of a Water Based Rolling Facility with Coupled Multielectrode Array Sensors and the Correlations with Other Process Variables: Conductivity, pH, Temperature, Dissolved Oxygen and Corrosion Potential." In CORROSION 2008. NACE International, 2008. https://doi.org/10.5006/c2008-08295.

Full text

Abstract:

Abstract Coupled multielectrode array sensors1-5(CMAS) with multielectrode corrosion analyzer and temperature monitoring capability were used along with an Isfet type pH probe, a process contact conductivity probe, and dissolved oxygen probe to monitor data over one year in an Alcoa rolling mill coolant system. During this time several excursions of various parameters occurred, indicating chemical and possible electrical causes of corrosion. A CMAS type crevice type probe was also used to investigate crevice corrosion (a common problem on piping and fixtures coming in external contact with the

APA, Harvard, Vancouver, ISO, and other styles

4

Keiser, James R., Roberta A. Peascoe, James G. Hemrick, et al. "Materials Performance in High-Temperature Black Liquor Gasification." In CORROSION 2005. NACE International, 2005. https://doi.org/10.5006/c2005-05314.

Full text

Abstract:

Abstract Combined cycle gasification of the black liquor waste stream generated in pulp and paper mills offers the potential for more efficient recovery of the energy content of the stream as well as a reduction in emissions and operation of a system without the potential for molten smelt - water explosions. Many companies and organizations have studied, proposed and/or developed black liquor gasification systems. Two of these have been taken to the stage of implementation in operating North American mills. The lower temperature process is being employed at two semi-chem mills; one in Big Isla

APA, Harvard, Vancouver, ISO, and other styles

5

Kish, J. R., D. L. Singbeil, and J. R. Keiser. "Stress Corrosion Cracking Susceptibility of Alternative Composite Tube Alloys in Simulated Kraft Recovery Boiler Environment." In CORROSION 2004. NACE International, 2004. https://doi.org/10.5006/c2004-04244.

Full text

Abstract:

Abstract Cracking of co-extruded 304L stainless steel/carbon steel (composite) tubes in the lower-furnace section of kraft recovery boilers continues to be a serious problem. One remedial approach being used by pulp mills involves replacing the conventional 304L-based composite tube system with alternative composite tube systems based on Alloy 825 and Alloy 625. U-bend stress corrosion cracking tests were conducted on these alloys in a simulated wash-water environment. Attention was given to studying relative SCC resistance in relevant metallurgical conditions, which include mill-annealed, sen

APA, Harvard, Vancouver, ISO, and other styles

6

Castillo, A. P., and D. L. Caudill. "Monitoring the Effect of Pulp and Paper Mill Process Changes on the Corrosion Resistance of 316 and 316L Austenitic Stainless Steels." In CORROSION 1997. NACE International, 1997. https://doi.org/10.5006/c1997-97374.

Full text

Abstract:

Abstract This paper presents the results of corrosion studies in two pulp and paper mills employing two corrosion monitoring techniques: (1) linear polarization resistance (LPR) and, (2) electrochemical noise (EN). These online electrochemical corrosion monitoring techniques were used to evaluate the change in corrosion rate and pitting resistance of Type 316 and 316L stainless steels, as a direct result of chemical change of white water process streams.

APA, Harvard, Vancouver, ISO, and other styles

7

Baird, Crawford, Dora Ogles, and Brett R. Baldwin. "Molecular Microbiological Methods to Investigate Microbial Influenced Corrosion in Fully Integrated Kraft Pulp and Paper Mills." In CORROSION 2016. NACE International, 2016. https://doi.org/10.5006/c2016-07278.

Full text

Abstract:

Abstract MIC often contributes to corrosion in paper mills despite the seemingly inhospitable conditions for microbial growth. Molecular microbiological methods most notably quantitative polymerase chain reaction (qPCR) were employed to examine MIC at three paper mills with unique operations and construction materials. Despite raw water treatment, qPCR quantification of total bacteria and specific MIC associated microbial groups revealed growth of substantial and diverse microbial populations which had not been identified with cultivation based methods. Moreover, qPCR quantification of several

APA, Harvard, Vancouver, ISO, and other styles

8

Sullivan, P. J., and B. J. Hepburn. "The Evolution of Phosphonate Technology for Corrosion Inhibition." In CORROSION 1995. NACE International, 1995. https://doi.org/10.5006/c1995-95496.

Full text

Abstract:

Abstract The commercialization of phosphonates for cooling water applications ushered in a new era for chemical treatment by the service companies. Introduced in the late 1960's, they remain the mainstay of programs utilized in areas ranging from HVAC to heavy industrial applications in steel mills. The longevity of this family of compounds is due to their effectiveness as calcium carbonate threshold agents and apparent activity as ferrous metal corrosion inhibitors. The universal acceptance of phosphonates in cooling water programs has inadvertently resulted in generalized applications of the

APA, Harvard, Vancouver, ISO, and other styles

9

Tomlin, John L., Horace E. Durham, and James Carr. "The Use of an Organic Dispersant as Primary Treatment in a Textile Air Washer and Cooling Water System a Case History." In CORROSION 1986. NACE International, 1986. https://doi.org/10.5006/c1986-86021.

Full text

Abstract:

Abstract In the textile industry, temperature and humidity are critical to production and air washers are utilized to control both. Besides regulating temperature and humidity, air washers "wash" the air free of particulate matter. This continuous "washing" introduces a heavy loading of contaminants on these systems and makes deposit control the primary treatment concern. Clinton Mills, Geneva, Alabama, is a textile manufacturing plant where, historically, the air washers required a lot of attention. Deposits were heavy, mainly oil and microbiological matter, and resulted in continuous pluggin

APA, Harvard, Vancouver, ISO, and other styles

10

Frail, Paul R., Martin M. Morra, and Gilad Zorn. "Performance Analysis of Commercial Azoles for Yellow Metal Corrosion Control Utilizing Surface Analysis and Electrochemistry." In CORROSION 2014. NACE International, 2014. https://doi.org/10.5006/c2014-4246.

Full text

Abstract:

Abstract Commercial azoles benzotriazole (BZT), tolyltriazole (TTA), and butyl benzotriazole (BBZT) are well known water industrial yellow metal corrosion inhibitors. BZT, TTA, and BBZT are all organic film forming species that coordinate and passivate the surface providing protection from corrosive species such as chloride and sulfates, which have been reported to be due to the stabilization of Cu(I), and providing a hydrophobic barrier on the surface. In this study the performances of BZT, TTA, and BBZT are analyzed based on their bulk corrosion properties, mpy (mills per year) and electrode

APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Water mills"

1

Winchell, Alyssa, Olivia Helinski, Thom Curdts, and Monique LaFrance Bartley. Shoreline length and water area in the ocean, coastal, and Great Lakes parks (second edition): Updated statistics for shoreline miles and water acres. National Park Service, 2024. http://dx.doi.org/10.36967/2299484.

Full text

Abstract:

This report details the cumulative shoreline miles and water acres within the 88 ocean, coastal, and Great Lakes National Park units. Across the National Park Service (NPS), there is a total of 14,350 shoreline miles and 2,534,595 water acres. This report serves as an update to the NPS Natural Resource Report titled, ?Shoreline length and water area in the ocean, coastal and Great Lakes Parks: Updated statistics for shoreline miles and water acres (rev 1b)? (Curdts 2011). Note: For park units located in ocean settings, ?water acres? refers to marine, estuarine, and tidally influenced waters. F

APA, Harvard, Vancouver, ISO, and other styles

2

Patil and Cerkovnik. PR-425-123722-R01 Internally Lined Steel Risers as an Alternative to CRAs. Pipeline Research Council International, Inc. (PRCI), 2013. http://dx.doi.org/10.55274/r0010573.

Full text

Abstract:

Carbon steel and low alloy steel are the common, cost effective materials of choice for design of production risers in deep water. They are, however, often challenged by high stress and fatigue loadings. When production fluids are corrosive and or sour, steel risers may not be feasible without the protection from corrosive effects. To mitigate degradation, the only proven solution to date is the use of corrosion resistant alloys (CRA), either in homogeneous or clad/lined steel pipe product. However, corrosion resistant alloys are very expensive and market supply is limited due to the number of

APA, Harvard, Vancouver, ISO, and other styles

3

Deford, Lillian. Story Mill Hydrology and Water Quality Data [dataset]. Montana State University ScholarWorks, 2016. http://dx.doi.org/10.15788/m2tg6c.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Modell, M. Treatment of pulp mill sludges by supercritical water oxidation. Office of Scientific and Technical Information (OSTI), 1990. http://dx.doi.org/10.2172/6282413.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Wallace, Janae, Trevor H. Schlossnagle, Kathryn Ladig, Paul C. Inkenbrandt, Hugh Hurlow, and Christian Hardwick. Characterization of Groundwater in Johns and Emery Valleys, Garfield and Kane County, Utah, With Emphasis on the Groundwater Budget and Groundwater-Surface-Water Interaction. Utah Geological Survey, 2024. http://dx.doi.org/10.34191/ss-172.

Full text

Abstract:

Johns and Emery Valleys are in south-central Utah, about 20 miles (32 km) southeast of Panguitch in Garfield and Kane Counties, and have a population of about 360 residents. However, Bryce Canyon National Park forms the southeastern boundary of the study area and tourist visitation to the park and the valleys reaches the millions annually. Water resource development and water quality concerns in this seasonally overpopulated area have prompted our comprehensive study of groundwater in Johns and Emery Valleys. This report presents a new estimate of valley-fill thickness; six valley-fill cross s

APA, Harvard, Vancouver, ISO, and other styles

6

Shannon. L51584 Effect of Water Chemistry on Internal Corrosion Rates in Offshore Pipelines.pdf. Pipeline Research Council International, Inc. (PRCI), 1988. http://dx.doi.org/10.55274/r0010643.

Full text

Abstract:

This work is an extension of a program reported in 1984 to establish factors which control corrosion of API line pipe in gas containing carbon dioxide and water. In this phase of the program, there were four objectives. One was to establish the temperature of maximum corrosion in the range of 75�, 100� and 175�F at 1000 psi in water saturated with carbon dioxide at partial pressures of 15 and 50 psia. The next was to explore the role of carbon content and microstructure in the steel, iron carbonate film formation, and resulting corrosion rates. The third was to examine the role of pre-existing

APA, Harvard, Vancouver, ISO, and other styles

7

Guelzow, Emma, Tanya Dapkey, and Jeff Smith. Freshwater snail inventory at Upper Delaware Scenic and Recreational River. National Park Service, 2025. https://doi.org/10.36967/2309764.

Full text

Abstract:

The Upper Delaware Scenic and Recreational River (UPDE) unit of the National Park Service partnered with the Academy of Natural Sciences of Drexel University (ANS) to perform a freshwater snail inventory within the park. ANS and UPDE teams conducted field research in July and August of 2022 and 2023 using a combination of kick-net sampling and hand-picking methods to determine the abundance and diversity of freshwater snail populations. Fifty-four sites were surveyed along the 73 miles of the Delaware River within UPDE and included cold-water and warmwater fisheries zones. In 2022, field colle

APA, Harvard, Vancouver, ISO, and other styles

8

Fuerstenau, D. W. Rheology of coal-water slurries prepared by the HP roll mill grinding of coal. Office of Scientific and Technical Information (OSTI), 1992. http://dx.doi.org/10.2172/6698413.

Full text

APA, Harvard, Vancouver, ISO, and other styles

9

Slack, William, Anthony Bednar, and K. Killgore. Development of a trace element signature library across a large watershed for assessing large-scale fish movement patterns : supplemental data. Engineer Research and Development Center (U.S.), 2025. https://doi.org/10.21079/11681/49787.

Full text

Abstract:

Utilizing trace element or stable isotope analysis has proven to be an effective means to characterize early life history and large-scale movement patterns in fishes. Target species are assessed for analyte concentrations occurring in calcified hard structures and compared to signatures noted from associated watersheds. Our objective was to establish a trace element signature profile for major tributaries occurring within the Mississippi River Valley (MRV). Unfiltered water samples were obtained from 49 stations from Dubuque, IA downstream to Gramercy, LA (1387 river miles) from July through D

APA, Harvard, Vancouver, ISO, and other styles

10

Barry, Jeff. PR-740-223900-R01 Common River Assessment and Information Sharing Platform. Pipeline Research Council International, Inc. (PRCI), 2023. http://dx.doi.org/10.55274/r0000043.

Full text

Abstract:

Flood related channel bed erosion, bank migration, and channel avulsions can represent a significant threat to pipeline integrity. Because there is well over 100,000 miles of liquid petroleum pipelines across the United States, the number of pipeline water crossings at risk from potential flood related forces is equally large. However, the vast majority of these pipeline water crossings are located on small rivers and streams that do not represent a significant threat to pipeline integrity. Conversely, understanding which rivers have the potential to impact pipeline integrity is critical for p

APA, Harvard, Vancouver, ISO, and other styles

We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!